New and Changed Information

This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 7000 Series NX-OS Security Command Reference. The latest version of this document is available at the following Cisco website:
http://www.cisco.com/c/en/us/support/switches/nexus-7000-series-switches/products-command-reference-list.html

To check for additional information about this Cisco NX-OS Release, see the Cisco NX-OS Release Notes available at the following Cisco website:
http://www.cisco.com/c/en/us/support/switches/nexus-7000-series-switches/products-release-notes-list.html

The following table summarizes the new and changed features for the Cisco Nexus 7000 Series NX-OS Security Command Reference and tells you where they are documented.

Table 1 New and Changed Information
Feature
Description
Changed in Release

FEX

Added the hardware qos dscp-to-queue ingress module-type command.

6.2(2)

 

Added the hardware queue-limit command.

6.2(2)

 

Added the show hardware qos dscp-to-queue ingress command.

6.2(2)

 

Updated the show queuing interface command.

6.2(2)

 

Updated the type command.

6.2(2)

 

Added the port-channel mink-links command.

6.1(3)

 

Changed the show port-channel summary command output.

6.1(3)

 

Added the port-channel min-links 3 to the show running-config output for the port channel.

6.1(3)

 

Support for FEX 2232TM and 2248TPE was introduced.

6.1(1)

 

Support for FEX 2224TP and 2232P was introduced.

5.2(1)

 

Added the attach fex command.

5.1(1)

 

Added the description command.

5.1(1)

 

Added the feature-set fex command.

5.1(1)

 

Added the fex command.

5.1(1)

 

Added the fex associate command.

5.1(1)

 

Added the install feature-set fex command.

5.1(1)

 

Added the reload fex command.

5.1(1)

 

Added the serial command.

5.1(1)

 

Added the switchport mode fex-fabric command.

5.1(1)

 

Added the show environment fex command.

5.1(1)

 

Added the show fex command.

5.1(1)

 

Added the show fex detail command.

5.1(1)

 

Added the show fex transceiver command.

5.1(1)

 

Added the show fex version command.

5.1(1)

 

Added the show running-config fex command.

5.1(1)

 

Added the show sprom fex command.

5.1(1)

 

Added the show tech fex all command.

5.1(1)

 

Added the show tech-support fex command.

5.1(1)

 

Added the show inventory fex command.

4.2(1)

 

Added the show version fex command.

4.2(1)

 

Added the type command.

4.2(1)

 

Added the show system reset-reason fex command.

4.2(1)

 

Added the show interface transceiver fex-fabric command.

4.0(1a)

 

Added the logging fex command.

4.0(1a)

 

Added the pinning max-links command.

4.0(1a)

 

Added the beacon command.

4.0(1a)