Cisco Nexus 5500 Series NX-OS QoS Command Reference
- Updated:
- January 26, 2018
Chapter: D Commands
D Commands
This chapter describes the Cisco NX-OS quality of service (QoS) commands that begin with D.
description
To add a description to a class map, policy map, or table map, use the description command. To remove the description, use the no form of this command.
Syntax Description
Description for the class map, policy map, or table map. The description can be a maximum of 200 alphanumeric characters. |
Command Default
Command Modes
Class map type network qos configuration
Class map type qos configuration
Class map type queuing configuration
Policy map type network qos configuration
Policy map type qos configuration
Policy map type queuing configuration
Command History
|
|
|
Examples
This example shows how to add a description to a qos class map:
switch(config)# class-map my_class1
Related Commands
|
|
|
|---|---|
Feedback