Cisco Nexus 5000 Series NX-OS Fibre Channel over Ethernet Configuration Guide, Release 5.1(3)N1(1)

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: December 7, 2011

Chapter: New and Changed Information

New and Changed Information

New and Changed Information

This chapter contains the following sections:

New and Changed Information

New and Changed Information

This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 5000 Series NX-OS Fibre Channel over Ethernet Configuration Guide.

The latest version of this document is available at the following URL:

http://www.cisco.com/en/US/products/ps9670/products_installation_and_configuration_guides_list.html

To check for additional information about Cisco NX-OS software, see the Cisco Nexus 5000 Series and Cisco Nexus 2000 Series Release Notes available at the following URL:

http://www.cisco.com/en/US/products/ps9670/prod_release_notes_list.html

The following table summarized the changes in this book for release 5.1(3)N1(1):

Feature	Description	Where Documented
Cisco Adapter FEX with FCoE	Support has been added for FCoE connections between a Cisco Nexus Series switch using a Cisco Nexus 2000 Series Fabric Extender and a Virtual Interface Card (VIC).	Configuring_FCoE_over Adapter FEX
FCoE with an Enhanced vPC Topology	Support has been added for using FCoE in an enhanced vPC topology. This new feature replaces the FEX straight-through and host CNA active-active topologies.	FCoE over Enhanced vPC and Configuring FCoE over Enhanced vPC
SAN Boot with vPC	You can now use a virtual port channel to boot the switch from a SAN boot image.	SAN Boot with vPC
Quality of Service policies	The Cisco Nexus 5500 Platform switch now has default QoS policies. You no longer need to change the defaults when you enable FCoE.

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)