This chapter describes the Cisco NX-OS virtual port channel (vPC) commands that begin with F.
To enable a virtual port channel (vPC), which allows links that are physically connected to two different Cisco Nexus 5000 Series devices to appear as a single port channel to a third device, use the feature vpc command. To disable vPC on the switch, use the no form of this command.
|
|
---|---|
In a vPC configuration, the third device can be a Cisco Nexus 2000 Series Fabric Extender, switch, server, or any other networking device.
This example shows how to enable vPC on the switch:
|
|
---|---|