Cisco Nexus 3548 Switch NX-OS Layer 2 Switching Configuration Guide, Release 6.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: June 29, 2015

New and Changed Information

This chapter contains the following sections:

New and Changed Information

The following table provides an overview of the significant changes made to this configuration guide. The table does not provide an exhaustive list of all changes made to this guide or all new features in a particular release.


Feature	Description	Added or Changed in Release	Where Documented
Traffic Storm Control	Added support for aggregation mode on traffic storm control.	6.0(2)A8(1)	Information About Traffic Storm Control
MAC Address Tables	Added support for configuring MAC move loop detection.	6.0(2)A8(1)	Configuring MAC Move Loop Detection
PVLAN Support	Support for configuring private VLANs.	6.0(2)A7(1)	Information About Private VLANs
Flex Links	Flex Links are a pair of a Layer 2 interfaces (switch ports or port channels) where one interface is configured to act as a backup to the other. The feature provides an alternative solution to the Spanning Tree Protocol (STP).	6.0(2)A3(1)	Configuring Flex Links

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)