Cisco Nexus 3548 Switch NX-OS Multicast Routing Configuration Guide, Release 9.3(x)

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: July 14, 2022

New and Changed Information

This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 3548 Switch NX-OS Multicast Routing Configuration Guide, Release 9.3(x).

New and Changed Information

The following table provides an overview of the significant changes to this guide for this current release. The table does not provide an exhaustive list of all changes made to the configuration guides or of the new features in this release.

Table 1. New and Changed Features
Feature	Description	Added or Changed in Release	Where Documented
Consistency Checker	Consistency Check for L2, L3, and Multicast	9.3(3)	Consistency Checker Commands for Cisco Nexus 3500 Series Switch
Multicast Features	No updates since Cisco NX-OS Release 9.2(x)	9.3(1)	Not Applicable

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)