Cisco Nexus 3000 Series NX-OS System Management Configuration Guide, Release 9.2(x)

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: January 12, 2024

New and Changed Information

This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 3000 Series NX-OS System Management Configuration Guide, Release 9.2(x)..

New and Changed Information

This table summarizes the new and changed features for the Cisco Nexus 3000 Series NX-OS System Management Configuration Guide, Release 9,2(x) and tells you where they are documented.

Table 1. New and Changed Features for Cisco NX-OS Release 9.2(x)
Feature	Description	Changed in Release	Where Documented
Support for configuring the PTP mean path delay threshold value.	Introduced this feature.	9.2(1)	Configuring the Mean Path Delay Threshold Value
System message logging	Added support to send syslog messages to remote logging servers over secure TLS transport connection.	9.2(1)	Configuring System Message Logging
TAP aggregation filters based on MPLS tags	Introduced this feature.	9.2(1)	Guidelines and Limitations for Tap Aggregation

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)