The following table lists and illustrates the contents for the accessory kit.

Illustration	Description	Quantity
	Rack Mount Kit 12-24 x 3/4-in. Phillips screws (24) M6 x 19 mm Phillips screws (24) Adjustable bottom-support rails (2)	1 kit
	RJ-45 rollover cable	1
	DB-9F/RJ-45F PC terminal	1
	Ground lug kit Two-hole lug (1) M4 x 8-mm Phillips pan-head screws (2)	1 kit
	Cable tie, 8.5 inches (10)	1
	ESD wrist strap (disposable)	1
Not applicable	Hazardous substances list for customers in China	1
Not applicable	Cisco Information Packet	1
Not applicable	1-Year Limited Warranty for Hardware	1

Note

If you do not receive a part listed in this document, contact Cisco Technical Support at this URL: http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml. If you purchased this product through a Cisco reseller, you might receive additional contents in your kit, such as documentation, hardware, and power cables.

The product shipment includes power cords for the following power supplies:

• 3-kW AC power supplies—one power cord per power supply

• 3-kW DC power supplies—no power cords supplied (you must supply a 6 AWG cable for up to 45 A)

The shipped cables depend on your specification when placing an order. The available power cords for the 3-kW AC power supplies are as follows:

• CAB-AC-16A-AUS—power cord, 250-VAC 16A, C19, Australia

• CAB-AC-16A-CH—power cord, 16-A, China

• CAB-AC-2500W-EU—power cord, 250-VAC 16A, Europe

• CAB-AC-2500W-INT—power cord, 250-VAC 16A, International

• CAB-AC-2500W-ISRL—power cord, 250-VAC 16-A, Israel

• CAB-9K16A-US1—power cord, 250-VAC 16A, Src Plug NEMA 6-20, US/Japan

• CAB-AC-C6K-TWLK—power cord, 250-VAC 16A, twist lock, NEMA L6-20

• CAB-7513AC—power cord, AC 110V North America

• CAB-C19-CBN—cabinet jumper power cord, 250-VAC, 16A, C20C

• CAB-ACS-16—power cord, 16-A, Switzerland

• CAB-L520P-C19-US—NEMA L5-20 to IEC-C19 6ft US

The available AC power cords for the 3.5-kW HVAC/HVDC power supplies are as follows:

• CAB-AC-16A-SG-AR—power cord, IRSM 2073/Saf-D-Grid 250 VAC 16A, Argentina

• CAB-AC-16A-SG-AZ—power cord, AU20LS3/Saf-D-Grid, 250 VAC 16A, Australia and New Zealand

• CAB-AC-16A-SG-BR—power cord, EL224/Saf-D-Grid 250 VAC 16A, Brazil

• CAB-AC-16A-SG-CH—power cord, GB 16C/Saf-D-Grid, 250 VAC 16A, China

• CAB-AC-16A-SG-EU—power cord, CEE 7-7/Saf-D-Grid, 250 VAC 16A, Europe

• CAB-AC-16A-SG-IND—power cord, SABS 164-1/Saf-D-Grid 250 VAC 16A, India

• CAB-AC-16A-SG-IN—power cord, IEC60309/Saf-D-Grid, 250 VAC 16A, International

• CAB-AC-16A-SG-IS—power cord, SI 16S3/Saf-D-Grid, 250 VAC 16A, Israel

• CAB-AC-16A-SG-IT—power cord, CEI 23-50/Saf-D-Grid to IEC-C19 250 VAC 16A, Italy

• CAB-AC-20A-SG-US—power cord, 110 VAC 20A, Straight Blade, NEMA 5-20P/Saf-D-Grid, North America

• CAB-AC-20A-SG-US1—power cord, 125 VAC 20A, twist lock, NEMA L5-20/Saf-D-Grid, North America

• CAB-AC-20A-SG-US2—power cord, 250 VAC 20A, straight-blade, NEMA 6-20/Saf-D-Grid, North America

• CAB-AC-20A-SG-US3—power cord, 250 VAC 20A, twist lock, NEMA L6-20/Saf-D-Grid, North America

• CAB-AC-20A-SG-US4—power cord, 277 VAC 20A, NEMA L7-20P/Saf-D-Grid, North America

• CAB-AC-20A-SG-C20—cabinet jumper power cord, 250 VAC, 20A, IEC C20/Saf-D-Grid, North America

• CAB-AC-16A-SG-SA—power cord, 250 VAC 16A, EL/Saf-D-Grid, South Africa

• CAB-AC-16A-SG-SK—power cord, 250 VAC 16A, Src/Saf-D-Grid, Korea

• CAB-AC-16A-SG-SW—power cord, 250 VAC 16A, SEV 5934-2/Saf-D-Grid, Switzerland

• CAB-HV-25A-SG-IN2—power cord, 300 VAC/500 VDC 20A, Ring Terminal/Saf-D-Grid, IEC/EU

• CAB-HV-25A-SG-IN3—power cord, 300 VAC 20A, Saf-D-Grid P10/Saf-D-Grid P4, IEC/EU

• CAB-HV-25A-SG-US2—power cord, 300 VAC/500 VDC 20A, Ring Terminal/Saf-D-Grid, North America

• CAB-HV-25A-SG-US5—power cord, 300 VAC 20A, Saf-D-Grid P10/Saf-D-Grid P4, North America

Note	All power cords will not be orderable at first customer shipment (FCS).

The available DC power cords for the 3.5-kW HVAC/HVDC power supplies are as follows:

• CAB-HV-25A-SG-US1—power cord, 400-VDC 20A, Saf-D-Grid/Saf-D-Grid, North America

• CAB-HV-25A-SG-US2—power cord, 300-VAC/500-VDC 20A, Ring Terminal/Saf-D-Grid, North America

• CAB-HV-25A-SG-IN1—power cord, 400-VDC 20A, IEC/EU, Saf-D-Grid/Saf-D-Grid, International

• CAB-HV-25A-SG-IN2—power cord, 300-VAC/500-VDC 20A, IEC/EU, Ring Terminal/Saf-D-Grid, International

Note	All power cords will not be orderable at first customer shipment (FCS).

The Center-Mount Kit is not included in the accessory kit, but, if you are centering the chassis on a two-post rack, you must order this kit (part number N77-C7706-CMK=) when you order the switch. The following table lists the contents for this kit.