Overview

This chapter includes the following sections:

Overview of the Cisco Nexus 7702 Switch Installation Features

The Cisco Nexus 7702 chassis has two slots, one for the supervisor module and one for the I/O module. The chassis has two power supply slots which support either AC or DC 3-kW and HVAC/HVDC 3.5-kW power supplies. The chassis also has one fan tray at the rear. The following figure shows the standard hardware features seen from the front of the chassis.

Figure 1. Standard Hardware Features on the Front of the Cisco Nexus 7702 Chassis


1

I/O modules (one)

  • 12-port 100-Gigabit Ethernet I/O module (N77-F312CK-26)

  • 24-port 40-Gigabit Ethernet I/O module (N77-F324FQ-25)

  • 48-port 1- and 10-Gigabit Ethernet I/O module (N77-F348XP-23)

  • 30-port 100-Gigabit Ethernet I/O module (N77-F430CQ-36)

  • 12-port 100-Gigabit Ethernet I/O module (N77-M312CQ-26L)

  • 24-port 40-Gigabit Ethernet I/O module (N77-M324FQ-25L)

  • 48-port 1- and 10-Gigabit Ethernet I/O module (N77-M348XP-23L)

2

Supervisor modules (one) (N77-SUP2E and N77-SUP3E)

3

Power supplies (up to 2)

  • 3-kW AC power supply (N77-AC-3KW)

  • 3-kW DC power supply (N77-DC-3KW)

  • 3.5-kW HVAC/HVDC power supply (N77-HV-3.5KW)

Figure 2. Standard Hardware Features on the Rear of the Cisco Nexus 7702 Chassis


1

One fan tray (N77-C7702-FAN)