New and Changed Information

This chapter contains the following sections:

New and Changed Information

The following table provides an overview of the significant changes to this guide up to this current release. The table does not provide an exhaustive list of all changes made to the guide or of the new features up to this release.

Table 1. New Features and Changed Behavior in Cisco APIC

Cisco APIC Release Version

Feature

Description

Where Documented

Release 6.1(3)

Fault squelch policy updates

Prior to APIC release 6.1(3), when you squelch a fault, it was applicable to all the switches and controllers across the fabric that displayed the fault code. Beginning with release 6.1(3), you have the option of choosing the switch on which you need to squelch the fault by creating a fault squelch policy. You can also narrow them down further, such as a specific interface, by using a DN (Distinguished Name) filter.

This content is available in Create a fault squelch policy

Release 4.2(1)

Change Severity or Ignoring Event from Events table

You can change the severity or squelch an event directly from the Events table instead of from the monitoring policy.

This content is available in Changing the Severity or Squelching an Event

Release 4.0(1)

Ignore Fault option

The steps for squelching a fault are changed.

This content is available in Changing the Severity or Squelching a Fault.

Release 3.2(1)

Change Severity Policies

Adds the ability to override the default severity level of faults and events, including the ability to squelch a fault or event.

This content is available in Changing the Severity or Squelching a Fault and Changing the Severity or Squelching an Event.