Configuring Ethernet Interfaces
This module describes the configuration of Ethernet interfaces.
The distributed Gigabit Ethernet, 10-Gigabit, 40-Gigabit, 100-Gigabit Ethernet, and Fast Ethernet architecture and features deliver network scalability and performance, while enabling service providers to offer high-density, high-bandwidth networking solutions designed to interconnect the router with other systems in POPs, including core and edge routers and Layer 2 switches.
Feature History for Configuring Ethernet Interfaces
Release |
Modification |
Release 3.0 |
This feature was introduced on the Cisco CRS-1 Router. |
Release 3.2 |
Support was added for the Cisco CRS-1 Router for the SIP-800. Support for the 8-Port Gigabit Ethernet SPA was introduced on the Cisco CRS-1 Router. |
Release 3.3.0 |
Support was added for egress MAC accounting on the 8-port 10-Gigabit Ethernet PLIM. |
Release 3.4.0 |
The Layer 2 Virtual Private Network (L2VPN) feature was first supported on Ethernet interfaces. Support was added for the 8-Port 1-Gigabit Ethernet SPA. |
Release 3.5.0 |
Support was added on the Cisco CRS-1 Router for the 1-port 10-Gigabit Ethernet WAN SPA. |
Release 4.0.0 |
Support for the following physical layer interface modules (PLIMs) was added:
|
Release 4.0.1 |
Support for the following PLIMs was added:
|
Release 4.2.3 |
Support for Link Layer Discovery Protocol (LLDP) was added. |