Prerequisites for Configuring POS Interfaces
You must be in a user group associated with a task group that includes the proper task IDs. The command reference guides include the task IDs required for each command. If you suspect user group assignment is preventing you from using a command, contact your AAA administrator for assistance.
Before configuring POS interfaces, be sure that the following conditions are met:
-
You know the IP address of the interface you will assign to the new POS interface configuration.
-
You have configured one of the following controller types:
-
A SONET controller, as described in the Configuring Clear Channel T3/E3 Controllers and Channelized T3 and T1/E1 Controllers module.
-
A DWDM controller, as described in the Configuring Dense Wavelength Division Multiplexing Controllers module.
Note
POS DWDM controller configuration is supported on the Cisco 1-Port OC-768c/STM-256c DWDM PLIM only.
-