The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This appendix lists the specifications for the ISM line cards and SAMs for the Cisco ASR 9000 Series Aggregation Services Router.
The specifications are presented in the following tables:
Table A-1 , “Cisco ASR 9000 Series Environmental Specifications”
Table A-2 , “Card and Fan Tray Power Consumption Specifications”
Table A-3 , “SAM Power Connector Pin Assignments”
Table A-4 , “SAM Signal Connector Pin Assignments”
Table A-1 lists the environmental specifications for the Cisco ASR 9000 Series Router.
Operating Temperature (Short term)1: |
23 degrees to 131 degrees F |
Operating (halfsine): 21 in/sec (0.53 m/sec) Nonoperating (trapezoidal pulse): 20 G3, 52 in/sec (1.32 m/sec) |
|
Operating: 0.35 Grms4 from 3 to 500 Hz |
Table A-2 lists the power consumption specifications for the RSP card, line cards, and fan tray.
170 W at 86 degrees F (30 degrees C) |
|
551 W at 86 degrees F (30 degrees C) |
|
160 W at 86 degrees F (30 degrees C) |