Overview

This chapter contains the following sections:

Introduction to Cisco 1000 Series Integrated Services Routers

The Cisco 1100 Series Integrated Services Routers (ISRs) are fixed branch routers based on the Cisco IOS XE Everest 16.6.2 operating system, multi-core Data Plane.

The two types of platforms supported on Cisco 1100 Series ISRs are 8-port and 4-port platforms.

The 8-port platforms are high-performance managed service provider and enterprise platforms having:

  • 8-port integrated front panel switch ports

  • Optional POE on LAN daughter card with support up to 4PoE/2PoE+ ports

  • Optional WLAN support - 802.11ac WAVE 2

  • 4G LTE-Advanced support with carrier aggregation

The 4-port platforms are midrange performance managed service provider platforms and enterprise platforms with the following specifications:

  • 4-port integrated front panel switch ports

  • VDSL2 and ADSL2/2+ support

  • (Optional) PoE on LAN daughter card supporting 2PoE/1PoE+ ports

  • (Optional) WLAN support - 802.11ac WAVE 2

  • 4G LTE-Advanced support with carrier aggregation

Sections in this Document

The following table lists the sections in this document:

Section

Description

Overview

Provides a high-level description of the router and describes the main internal processes of the router.

Using the IOS XE Software

Describes the basics of using Cisco IOS XE software with the router.

Smart Licensing

Describes the Smart Licensing feature simplifies the Cisco software experience and helps you to understand how Cisco software is used across your network.

Console Port Telnet SSH Handling and Reset

Describes software features that are common across Cisco IOS XE platforms.

Installing the Software

Contains important information about filesystems, packages, licensing, and installing software.

Basic Router Configuration

Describes the basic tasks required to configure a router.

Configuring VDSL2 and ADSL2/2+ for Cisco 1100 ISR

Describes the software features and configuration information for VDSL2 and ADSL2/2+.

Wireless Device Configuration

Describes the important tasks to be performed to connect to wireless devices.

4G LTE-Advanced on Cisco 1100 ISR

Desribes the software features and configuration information for Cisco 4G LTE-Advanced

Configuring Ethernet Switch Ports

Describes the configuration tasks for Ethernet switch ports on Cisci 1100 ISR.

Slot and Subslot Configuration

Describes the slot and subslot configuration.

Online Insertion and Removal

Describes how you can start, stop, and reload a module.

Process Health Monitoring

Provides information about managing and monitoring the health of various components of the router.

System Messages

Provides information about syslog messages.

Environmental Monitoring and PoE Managemnet

Describes the environmental monitoring features on a router.

Configuring SFP Auto-Failover

Describes the steps to configure Auto Detect, Primary and Secondary Media.

Configuring Cellular IPv6 Address

Describes the steps to configure cellular IPv6 address.

Dying Gasp Through SNMP, Syslog and Ethernet OAM

Describes Dying Gasp as one of the methods to communicate during failure, which indicates that an unrecoverable condition has occurred.

Troubleshooting

Describes troubleshooting topics such a ADSL, VDSL2 and so on.