The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
To access Bulk Data management tasks, log into the system (see "Logging In" section on page 2-1). Then, from the Home page, click the Tools tab. The Tools page appears.
From the Tools page, click Bulk Data Mgr. The Bulk Data Page appears showing:
•Upload Bulk Data
•Create Sample Data
The following example shows the Document Type Definition (DTD) for the XML bulk upload:
<?xml version="1.0" encoding="utf-8"?>
<!--
* BulkUpdload.dtd - dtd for bulk upload
*
* July 2008, Config Engine
*
* Copyright (c) 2005-2008, 2011 by cisco Systems, Inc.
* All rights reserved.
-->
<!ELEMENT cns-bulk-upload (cns-element-data)>
<!ATTLIST cns-bulk-upload
stop-on-error (true | false) "false"
version (2.0 | 3.0) "3.0"
>
<!ELEMENT cns-element-data ( NSM-DATA | IMAGE-DATA)>
<!ELEMENT NSM-DATA (cns-device-info*, cns-sub-device-info*, cns-application-info*, cns-group-info*)>
<!ATTLIST NSM-DATA
op-type (add|edit|delete) #REQUIRED
validate-data (true | false) "false"
>
<!ELEMENT cns-device-info (cns-device-name, cns-extended-attr*, dev-image-information?, imgw-data?)>
<!ELEMENT cns-device-name (#PCDATA)>
<!ATTLIST cns-device-info
dev-type (other | imgw | pix | asa) "other"
>
<!ELEMENT cns-extended-attr (#PCDATA)>
<!ATTLIST cns-extended-attr
name CDATA #REQUIRED
>
<!ELEMENT dev-image-information (image-id, activation-template?, dev-image-info*)>
<!ELEMENT image-id (#PCDATA)>
<!ELEMENT activation-template (#PCDATA)>
<!ELEMENT dev-image-info (image-name, distribution)>
<!ELEMENT image-name (#PCDATA)>
<!ELEMENT distribution ( destination?, location)>
<!ATTLIST distribution
overwrite (yes | no) "no"
erase-flash (yes | no) "no"
activate (true | false) "false"
>
<!ELEMENT destination (#PCDATA)>
<!ELEMENT location (#PCDATA)>
<!-- Imgw-data-->
<!ELEMENT imgw-data (gateway-id?, device-type?, simulation-agent*, hop-information*)>
<!ELEMENT gateway-id (#PCDATA)>
<!ELEMENT device-type (#PCDATA)>
<!ELEMENT simulation-agent (#PCDATA)>
<!ELEMENT hop-information (hop-type, ip-address?, port?, username?, password?)>
<!ELEMENT hop-type (#PCDATA)>
<!ELEMENT ip-address (#PCDATA)>
<!ELEMENT port (#PCDATA)>
<!ELEMENT username (#PCDATA)>
<!ELEMENT password (#PCDATA)>
<!-- sub-device info-->
<!ELEMENT cns-sub-device-info (cns-sub-device-name, sub-device-id, line-card-type, cns-extended-attr*, main-device-name?)>
<!ELEMENT cns-sub-device-name (#PCDATA)>
<!ELEMENT sub-device-id (#PCDATA)>
<!ELEMENT line-card-type (#PCDATA)>
<!ELEMENT main-device-name (#PCDATA)>
<!ELEMENT cns-application-info (cns-application-name, cns-subject-mapping*)>
<!ELEMENT cns-application-name (#PCDATA)>
<!ELEMENT cns-subject-mapping (cns-original-subject, cns-pub-mapping*, cns-sub-mapping*, cns-pub-default, cns-sub-default)>
<!ELEMENT cns-original-subject (#PCDATA)>
<!ELEMENT cns-pub-mapping (#PCDATA)>
<!ELEMENT cns-sub-mapping (#PCDATA)>
<!ELEMENT cns-pub-default (#PCDATA)>
<!ELEMENT cns-sub-default (#PCDATA)>
<!ELEMENT cns-group-info (cns-group-name,cns-group-new-name?, cns-group-member*)>
<!ELEMENT cns-group-name (#PCDATA)>
<!ELEMENT cns-group-new-name (#PCDATA)>
<!ELEMENT cns-group-member (#PCDATA)>
<!ATTLIST cns-group-member
type (DEV | GRP) "DEV"
>
<!-- Here starts the definition for Image-data-->
<!ELEMENT IMAGE-DATA (image+)>
<!ATTLIST IMAGE-DATA
op-type (add|edit|delete) #REQUIRED
validate-data (true | false) "false"
>
<!ELEMENT image (name, image-info)>
<!ELEMENT name (#PCDATA)>
<!ELEMENT image-info (img-name, img-chksum?, hdr-chksum?, software-version?, system-description?, file-byte-size?, platform-family-name?, img-location*)>
<!ATTLIST image-info
image-type (IOS | pix-image | pdm | asa-image | asdm | other) "IOS"
>
<!ELEMENT img-name (#PCDATA)>
<!ELEMENT img-chksum (#PCDATA)>
<!ELEMENT hdr-chksum (#PCDATA)>
<!ELEMENT file-byte-size (#PCDATA)>
<!ELEMENT system-description (#PCDATA)>
<!ELEMENT platform-family-name (#PCDATA)>
<!ELEMENT software-version (#PCDATA)>
<!ELEMENT img-location (#PCDATA)>
Step 1 From the Bulk Data main menu, click Upload Bulk Data.
The Upload Bulk Data parameters page appears (see Figure 16-1).
Figure 16-1 Upload Bulk Data Parameters
Step 2 If you know the filename of the data file you want to load, enter it in the Filename field, otherwise use the browse function.
Table 16-1shows the valid values for this field.
|
|
|
---|---|---|
Filename |
Name of the file containing the data to be uploaded. |
a-z |
Step 3 Use the drop-down arrow to select the Data Format:
•XML
•CSV
Step 4 To clear this task, click Reset.
Step 5 To upload this data file, click Upload.
You can also upload the XML file to the directory using a command line utility as follows:
FTP the bulk upload XML file to the $CISCO_CE_INSTALL_ROOT/CSCOdat/scripts directory on the host system.
Step 6 Log into the box using Telnet.
Step 7 Go to: $CISCO_CE_INSTALL_ROOT/CSCOdat/scripts.
Step 8 Run the following command to invoke the bulk upload command line utility:
./upload.sh <xml filename>
For example: ./upload.sh my_bulk_data.xml
This uploads the data to the LDAP directory.
There is a data converter utility that you can use to convert bulk upload data on a system with a release prior to 3.5. This will allow you to do a bulk upload of data to Cisco Configuration Engine.
You can find this utility in <install base dir>/ConfigEngine/CSCOdat/XMLTransform.
Even though the DTD (see "XML DTD" section) outlines the structure of the input XML file, it does not convey the information about what values should be given for each tag. By looking at the sample data files in this section, you can get an idea of how the data should be arranged in the Bulk Upload XML file.
Step 1 From the Bulk Data main menu, click Add Bulk Data.
The Upload Bulk Data page appears (see Figure 16-2).
Figure 16-2 Create Sample Data Page
Step 2 Enter the prefix name for this sample in the Prefix field.
Table 16-2 shows valid values for these fields.
Step 3 Select Sample Data.
Step 4 To create this sample, click OK.
The following example shows sample device data in XML format:
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
<!DOCTYPE cns-bulk-upload (View Source for full doctype...)>
- <cns-bulk-upload stop-on-error="false" version="3.0">
- <cns-element-data>
- <NSM-DATA op-type="add" validate-data="false">
- <cns-device-info dev-type="other">
<cns-device-name>myDeviceDevice1</cns-device-name>
<cns-extended-attr name="IOSconfigtemplate">DemoRouter.cfgtpl</cns-extended-attr>
<cns-extended-attr name="IOSConfigID">myDeviceDevice1</cns-extended-attr>
<cns-extended-attr name="IOSEventID">myDeviceDevice1</cns-extended-attr>
- <dev-image-information>
<image-id>myDeviceDevice1</image-id>
</dev-image-information>
</cns-device-info>
- <cns-device-info dev-type="other">
<cns-device-name>myDeviceDevice2</cns-device-name>
<cns-extended-attr name="IOSconfigtemplate">DemoRouter.cfgtpl</cns-extended-attr>
<cns-extended-attr name="parent">/config/myDeviceGroup1</cns-extended-attr>
<cns-extended-attr name="IOSConfigID">myDeviceDevice2</cns-extended-attr>
<cns-extended-attr name="IOSEventID">myDeviceDevice2</cns-extended-attr>
- <dev-image-information>
<image-id>myDeviceDevice2</image-id>
</dev-image-information>
</cns-device-info>
- <cns-device-info dev-type="pix">
<cns-device-name>myDeviceDevice3</cns-device-name>
<cns-extended-attr name="ErrorAction">revert</cns-extended-attr>
<cns-extended-attr name="AuthPassword">myDevicepwd</cns-extended-attr>
<cns-extended-attr name="IOSconfigtemplate">DemoRouter.cfgtpl</cns-extended-attr>
<cns-extended-attr name="parent">/config/myDeviceGroup2</cns-extended-attr>
<cns-extended-attr name="ConfigAction">merge</cns-extended-attr>
<cns-extended-attr name="IOSConfigID">myDeviceDevice3</cns-extended-attr>
<cns-extended-attr name="IOSEventID">myDeviceDevice3</cns-extended-attr>
- <dev-image-information>
<image-id>myDeviceDevice3</image-id>
</dev-image-information>
</cns-device-info>
- <cns-device-info dev-type="asa">
<cns-device-name>myDeviceDevice4</cns-device-name>
<cns-extended-attr name="ErrorAction">revert</cns-extended-attr>
<cns-extended-attr name="AuthPassword">myDevicepwd</cns-extended-attr>
<cns-extended-attr name="IOSconfigtemplate">DemoRouter.cfgtpl</cns-extended-attr>
<cns-extended-attr name="parent">/config/myDeviceGroup2/myDeviceSubGroup1</cns-extended-attr>
<cns-extended-attr name="ConfigAction">merge</cns-extended-attr>
<cns-extended-attr name="IOSConfigID">myDeviceDevice4</cns-extended-attr>
<cns-extended-attr name="IOSEventID">myDeviceDevice4</cns-extended-attr>
- <dev-image-information>
<image-id>myDeviceDevice4</image-id>
</dev-image-information>
</cns-device-info>
- <cns-device-info dev-type="imgw">
<cns-device-name>myDeviceDevice5</cns-device-name>
<cns-extended-attr name="IOSconfigtemplate">DemoRouter.cfgtpl</cns-extended-attr>
<cns-extended-attr name="parent">/config/myDeviceGroup2/myDeviceSubGroup2</cns-extended-attr>
<cns-extended-attr name="IOSConfigID">myDeviceDevice5</cns-extended-attr>
<cns-extended-attr name="IOSEventID">myDeviceDevice5</cns-extended-attr>
- <dev-image-information>
<image-id>myDeviceDevice5</image-id>
</dev-image-information>
- <imgw-data>
<gateway-id>myDeviceIMGWGatewayID5</gateway-id>
<device-type>IOS</device-type>
<simulation-agent>IMAGEAGENT</simulation-agent>
<simulation-agent>CONFIGAGENT</simulation-agent>
- <hop-information>
<hop-type>IOS_LOGIN</hop-type>
<ip-address>0.0.0.0</ip-address>
<port>0000</port>
<username>myDeviceusr5</username>
<password>myDevicepwd5</password>
</hop-information>
- <hop-information>
<hop-type>IOS_EN</hop-type>
<ip-address />
<port />
<username />
<password>myDevicepasswd5</password>
</hop-information>
</imgw-data>
</cns-device-info>
- <cns-device-info dev-type="imgw">
<cns-device-name>myDeviceDevice6</cns-device-name>
<cns-extended-attr name="IOSconfigtemplate">DemoRouter.cfgtpl</cns-extended-attr>
<cns-extended-attr name="IOSConfigID">myDeviceDevice6</cns-extended-attr>
<cns-extended-attr name="IOSEventID">myDeviceDevice6</cns-extended-attr>
- <dev-image-information>
<image-id>myDeviceDevice6</image-id>
</dev-image-information>
- <imgw-data>
<gateway-id>myDeviceIMGWGatewayID6</gateway-id>
<device-type>IOS</device-type>
<simulation-agent>IMAGEAGENT</simulation-agent>
<simulation-agent>CONFIGAGENT</simulation-agent>
- <hop-information>
<hop-type>IOS_LOGIN</hop-type>
<ip-address>0.0.0.0</ip-address>
<port>0000</port>
<username>myDeviceusr6</username>
<password>myDevicepwd6</password>
</hop-information>
- <hop-information>
<hop-type>IOS_EN</hop-type>
<ip-address />
<port />
<username />
<password>myDevicepasswd6</password>
</hop-information>
</imgw-data>
</cns-device-info>
- <cns-group-info>
<cns-group-name>/config/myDeviceGroup1</cns-group-name>
<cns-group-member type="GRP">myDeviceSubGroup1</cns-group-member>
</cns-group-info>
- <cns-group-info>
<cns-group-name>/config/myDeviceGroup2</cns-group-name>
<cns-group-member type="GRP">myDeviceSubGroup1</cns-group-member>
<cns-group-member type="GRP">myDeviceSubGroup2</cns-group-member>
</cns-group-info>
</NSM-DATA>
</cns-element-data>
</cns-bulk-upload>
The following example shows sample data with the image in XML format:
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
<!DOCTYPE cns-bulk-upload (View Source for full doctype...)>
- <cns-bulk-upload stop-on-error="false" version="3.0">
- <cns-element-data>
- <NSM-DATA op-type="add" validate-data="false">
- <cns-device-info dev-type="other">
<cns-device-name>myDeviceDevice1</cns-device-name>
<cns-extended-attr name="IOSconfigtemplate">DemoRouter.cfgtpl</cns-extended-attr>
<cns-extended-attr name="IOSConfigID">myDeviceDevice1</cns-extended-attr>
<cns-extended-attr name="IOSEventID">myDeviceDevice1</cns-extended-attr>
- <dev-image-information>
<image-id>myDeviceDevice1</image-id>
<activation-template>DemoRouter.cfgtpl</activation-template>
- <dev-image-info>
<image-name>myDeviceIMAGEObj1</image-name>
- <distribution activate="false" erase-flash="no" overwrite="yes">
<destination>flash</destination>
<location>tftp://test.com/c7200-js-mz1</location>
</distribution>
</dev-image-info>
</dev-image-information>
</cns-device-info>
- <cns-device-info dev-type="other">
<cns-device-name>myDeviceDevice2</cns-device-name>
<cns-extended-attr name="IOSconfigtemplate">DemoRouter.cfgtpl</cns-extended-attr>
<cns-extended-attr name="parent">/config/myDeviceGroup1</cns-extended-attr>
<cns-extended-attr name="IOSConfigID">myDeviceDevice2</cns-extended-attr>
<cns-extended-attr name="IOSEventID">myDeviceDevice2</cns-extended-attr>
- <dev-image-information>
<image-id>myDeviceDevice2</image-id>
<activation-template>DemoRouter.cfgtpl</activation-template>
- <dev-image-info>
<image-name>myDeviceIMAGEObj2</image-name>
- <distribution activate="false" erase-flash="no" overwrite="yes">
<destination>flash</destination>
<location>tftp://test.com/c7200-js-mz2</location>
</distribution>
</dev-image-info>
</dev-image-information>
</cns-device-info>
- <cns-device-info dev-type="pix">
<cns-device-name>myDeviceDevice3</cns-device-name>
<cns-extended-attr name="ErrorAction">revert</cns-extended-attr>
<cns-extended-attr name="AuthPassword">myDevicepwd</cns-extended-attr>
<cns-extended-attr name="IOSconfigtemplate">DemoRouter.cfgtpl</cns-extended-attr>
<cns-extended-attr name="parent">/config/myDeviceGroup2</cns-extended-attr>
<cns-extended-attr name="ConfigAction">merge</cns-extended-attr>
<cns-extended-attr name="IOSConfigID">myDeviceDevice3</cns-extended-attr>
<cns-extended-attr name="IOSEventID">myDeviceDevice3</cns-extended-attr>
- <dev-image-information>
<image-id>myDeviceDevice3</image-id>
<activation-template>DemoRouter.cfgtpl</activation-template>
- <dev-image-info>
<image-name>myDeviceIMAGEObj3</image-name>
- <distribution activate="false" erase-flash="no" overwrite="yes">
<destination>flash</destination>
<location>tftp://test.com/c7200-js-mz3</location>
</distribution>
</dev-image-info>
</dev-image-information>
</cns-device-info>
- <cns-device-info dev-type="asa">
<cns-device-name>myDeviceDevice4</cns-device-name>
<cns-extended-attr name="ErrorAction">revert</cns-extended-attr>
<cns-extended-attr name="AuthPassword">myDevicepwd</cns-extended-attr>
<cns-extended-attr name="IOSconfigtemplate">DemoRouter.cfgtpl</cns-extended-attr>
<cns-extended-attr name="parent">/config/myDeviceGroup2/myDeviceSubGroup1</cns-extended-attr>
<cns-extended-attr name="ConfigAction">merge</cns-extended-attr>
<cns-extended-attr name="IOSConfigID">myDeviceDevice4</cns-extended-attr>
<cns-extended-attr name="IOSEventID">myDeviceDevice4</cns-extended-attr>
- <dev-image-information>
<image-id>myDeviceDevice4</image-id>
<activation-template>DemoRouter.cfgtpl</activation-template>
- <dev-image-info>
<image-name>myDeviceIMAGEObj4</image-name>
- <distribution activate="false" erase-flash="no" overwrite="yes">
<destination>flash</destination>
<location>tftp://test.com/c7200-js-mz4</location>
</distribution>
</dev-image-info>
</dev-image-information>
</cns-device-info>
- <cns-device-info dev-type="imgw">
<cns-device-name>myDeviceDevice5</cns-device-name>
<cns-extended-attr name="IOSconfigtemplate">DemoRouter.cfgtpl</cns-extended-attr>
<cns-extended-attr name="parent">/config/myDeviceGroup2/myDeviceSubGroup2</cns-extended-attr>
<cns-extended-attr name="IOSConfigID">myDeviceDevice5</cns-extended-attr>
<cns-extended-attr name="IOSEventID">myDeviceDevice5</cns-extended-attr>
- <dev-image-information>
<image-id>myDeviceDevice5</image-id>
<activation-template>DemoRouter.cfgtpl</activation-template>
- <dev-image-info>
<image-name>myDeviceIMAGEObj5</image-name>
- <distribution activate="false" erase-flash="no" overwrite="yes">
<destination>flash</destination>
<location>tftp://test.com/c7200-js-mz5</location>
</distribution>
</dev-image-info>
</dev-image-information>
- <imgw-data>
<gateway-id>myDeviceIMGWGatewayID5</gateway-id>
<device-type>IOS</device-type>
<simulation-agent>IMAGEAGENT</simulation-agent>
<simulation-agent>CONFIGAGENT</simulation-agent>
- <hop-information>
<hop-type>IOS_LOGIN</hop-type>
<ip-address>0.0.0.0</ip-address>
<port>0000</port>
<username>myDeviceusr5</username>
<password>myDevicepwd5</password>
</hop-information>
- <hop-information>
<hop-type>IOS_EN</hop-type>
<ip-address />
<port />
<username />
<password>myDevicepasswd5</password>
</hop-information>
</imgw-data>
</cns-device-info>
- <cns-device-info dev-type="imgw">
<cns-device-name>myDeviceDevice6</cns-device-name>
<cns-extended-attr name="IOSconfigtemplate">DemoRouter.cfgtpl</cns-extended-attr>
<cns-extended-attr name="IOSConfigID">myDeviceDevice6</cns-extended-attr>
<cns-extended-attr name="IOSEventID">myDeviceDevice6</cns-extended-attr>
- <dev-image-information>
<image-id>myDeviceDevice6</image-id>
<activation-template>DemoRouter.cfgtpl</activation-template>
- <dev-image-info>
<image-name>myDeviceIMAGEObj6</image-name>
- <distribution activate="false" erase-flash="no" overwrite="yes">
<destination>flash</destination>
<location>tftp://test.com/c7200-js-mz6</location>
</distribution>
</dev-image-info>
</dev-image-information>
- <imgw-data>
<gateway-id>myDeviceIMGWGatewayID6</gateway-id>
<device-type>IOS</device-type>
<simulation-agent>IMAGEAGENT</simulation-agent>
<simulation-agent>CONFIGAGENT</simulation-agent>
- <hop-information>
<hop-type>IOS_LOGIN</hop-type>
<ip-address>0.0.0.0</ip-address>
<port>0000</port>
<username>myDeviceusr6</username>
<password>myDevicepwd6</password>
</hop-information>
- <hop-information>
<hop-type>IOS_EN</hop-type>
<ip-address />
<port />
<username />
<password>myDevicepasswd6</password>
</hop-information>
</imgw-data>
</cns-device-info>
- <cns-group-info>
<cns-group-name>/config/myDeviceGroup1</cns-group-name>
<cns-group-member type="GRP">myDeviceSubGroup1</cns-group-member>
</cns-group-info>
- <cns-group-info>
<cns-group-name>/config/myDeviceGroup2</cns-group-name>
<cns-group-member type="GRP">myDeviceSubGroup1</cns-group-member>
<cns-group-member type="GRP">myDeviceSubGroup2</cns-group-member>
</cns-group-info>
</NSM-DATA>
</cns-element-data>
</cns-bulk-upload>
NOTES
•For Bulk Upload of NSM devices with Image Info, make sure that the image objects referenced in the dev-image-info element tag already exist.
• The location given should be one of the multiple image locations specified with the image object.
•If there are errors while adding the devices, please check the error file provided as a result of the Upload operation. There can be an exception given as CISException, which points to the CISDevice creation failed, which could have occurred if you had ignored the checklist. In this case, just recheck the information provided in the dev-image-information element tag. Correct the file and upload it again.
The following example shows image data sample:
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
<!DOCTYPE cns-bulk-upload (View Source for full doctype...)>
- <cns-bulk-upload stop-on-error="false" version="3.0">
- <cns-element-data>
- <IMAGE-DATA op-type="add" validate-data="false">
- <image>
<name>myDeviceIMAGEObj1</name>
- <image-info image-type="IOS">
<img-name>c7200-js-mz1</img-name>
<img-chksum>0x1256faf245</img-chksum>
<software-version>12.2(8)T6</software-version>
<system-description>Cisco Network Operating System</system-description>
<file-byte-size>1040</file-byte-size>
<platform-family-name>7200</platform-family-name>
<img-location>tftp://test.com/c7200-js-mz1</img-location>
</image-info>
</image>
- <image>
<name>myDeviceIMAGEObj2</name>
- <image-info image-type="IOS">
<img-name>c7200-js-mz2</img-name>
<img-chksum>0x1256faf245</img-chksum>
<software-version>12.2(8)T6</software-version>
<system-description>Cisco Network Operating System</system-description>
<file-byte-size>1040</file-byte-size>
<platform-family-name>7200</platform-family-name>
<img-location>tftp://test.com/c7200-js-mz2</img-location>
</image-info>
</image>
- <image>
<name>myDeviceIMAGEObj3</name>
- <image-info image-type="pix-image">
<img-name>c7200-js-mz3</img-name>
<img-chksum>0x1256faf245</img-chksum>
<software-version>12.2(8)T6</software-version>
<system-description>Cisco Network Operating System</system-description>
<file-byte-size>1040</file-byte-size>
<platform-family-name>7200</platform-family-name>
<img-location>tftp://test.com/c7200-js-mz3</img-location>
</image-info>
</image>
- <image>
<name>myDeviceIMAGEObj4</name>
- <image-info image-type="pdm">
<img-name>c7200-js-mz4</img-name>
<img-chksum>0x1256faf245</img-chksum>
<software-version>12.2(8)T6</software-version>
<system-description>Cisco Network Operating System</system-description>
<file-byte-size>1040</file-byte-size>
<platform-family-name>7200</platform-family-name>
<img-location>tftp://test.com/c7200-js-mz4</img-location>
</image-info>
</image>
- <image>
<name>myDeviceIMAGEObj5</name>
- <image-info image-type="asa-image">
<img-name>c7200-js-mz5</img-name>
<img-chksum>0x1256faf245</img-chksum>
<software-version>12.2(8)T6</software-version>
<system-description>Cisco Network Operating System</system-description>
<file-byte-size>1040</file-byte-size>
<platform-family-name>7200</platform-family-name>
<img-location>tftp://test.com/c7200-js-mz5</img-location>
</image-info>
</image>
- <image>
<name>myDeviceIMAGEObj6</name>
- <image-info image-type="asdm">
<img-name>c7200-js-mz6</img-name>
<img-chksum>0x1256faf245</img-chksum>
<software-version>12.2(8)T6</software-version>
<system-description>Cisco Network Operating System</system-description>
<file-byte-size>1040</file-byte-size>
<platform-family-name>7200</platform-family-name>
<img-location>tftp://test.com/c7200-js-mz6</img-location>
</image-info>
</image>
- <image>
<name>myDeviceIMAGEObj7</name>
- <image-info image-type="IOS">
<img-name>c7200-js-mz7</img-name>
<img-chksum>0x1256faf245</img-chksum>
<software-version>12.2(8)T6</software-version>
<system-description>Cisco Network Operating System</system-description>
<file-byte-size>1040</file-byte-size>
<platform-family-name>7200</platform-family-name>
<img-location>tftp://test.com/c7200-js-mz7</img-location>
</image-info>
</image>
- <image>
<name>myDeviceIMAGEObj8</name>
- <image-info image-type="IOS">
<img-name>c7200-js-mz8</img-name>
<img-chksum>0x1256faf245</img-chksum>
<software-version>12.2(8)T6</software-version>
<system-description>Cisco Network Operating System</system-description>
<file-byte-size>1040</file-byte-size>
<platform-family-name>7200</platform-family-name>
<img-location>tftp://test.com/c7200-js-mz8</img-location>
</image-info>
</image>
</IMAGE-DATA>
</cns-element-data>
</cns-bulk-upload>