- Preface
- Product Overview
- Graphical User Interface
- Device and Subdevice Manager
- User Account Manager
- Configuration and Image Update Jobs Manager
- Groups
- Namespace Manager
- Query Manager
- Data Manager
- Directory Manager
- Parameter Manager
- Templates
- Security Manager
- Log Manager
- Service Manager
- Bulk Data Manager
- Email Manager
- Image Service
- Upgrade or Downgrade Cisco IOS Image
- Backup and Restore
- PIX Firewall Device Support
- IMGW Device Module Development Toolkit
- Troubleshooting
- Software Licenses and Acknowledgements
Cisco Configuration Engine Administrator Guide, 2.0
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- November 17, 2013
Chapter: Groups
Groups
To access Group management tasks, log into the system (see "Logging In" section on page 2-1). Then, from the Home page, click the Tools tab. The Tools page appears.
From the Tools page, click Group Mgr. The Group Management page appears showing:
•
View Groups
•Create Group
•Edit Group
•Clone Group
•Move Group
•Delete Groups
•Create Group Using Search
Viewing Groups
From the Group Management page click View Groups. The View Groups page appears (see Figure 6-1).
Figure 6-1 View Groups Page
Creating Groups
Step 1 From the Group Management page click Create Groups.
The Create Groups page appears (see Figure 6-2).
Figure 6-2 Create Group
Step 2 Enter the group name.
Step 3 Use the drop-down arrow to select a namespace value (only config available), then click Next.
The Select Parent Group page appears (see Figure 6-3).
Figure 6-3 Select Parent Group Page
Step 4 Click the radio button(s) to select the parent group with which you want the new group to associated, then click Next.
The Select Member Devices page appears (see Figure 6-4).
Figure 6-4 Select Member Devices Page
Step 5 Check to select the devices you want to be in this group, then click Finish.
Editing Groups
Step 1 From the Group Management page click Edit Group.
The Group list appears.
Step 2 Click the radio button to select a group to edit, then click Next.
The Rename Group page appears.
Step 3 Rename group, if applicable, then click Finish to complete the task, or click Next to continue (see Figure 6-5).
Figure 6-5 Edit Group Members
Step 4 Click the Group you are editing to bring up its members.
Step 5 Modify the members in this group by using the check box next to each member, then click Finish.
Cloning Groups
Step 1 From the Group Management page click Clone Group.
The Group list appears.
Step 2 Select a group to clone.
Step 3 Select parent group.
Step 4 Enter new group name.
Moving Groups
Step 1 From the Group Management page click Move Group.
The Group list appears.
Step 2 Select a group to move.
Step 3 Select parent group.
Deleting Groups
Step 1 From the Group Management page click Delete Groups.
The Group list appears.
Step 2 Check to select the group(s) you want to delete.
Creating Groups Using Search
Step 1 From the Group Management page click Create Group Using Search.
The search for devices page appears (see Figure 6-6).
Figure 6-6 Search for Devices
Step 2 Enter the appropriate arguments for the search, then click Query.
Any devices found appear on the next page (see Figure 6-7).
Figure 6-7 Select Devices to Add to Group
Step 3 Check to select the devices you want to become members of this new group, then click Next.
The next page (see Figure 6-8) gives you the choice to add a new group, or just add the devices found to an existing group.
Figure 6-8 Name Group and Namespace
Step 4 Enter group name.
Step 5 Use the drop-down arrow to select a namespace value, then click Next.
The group list page appears.
Step 6 Select group parent, then click Finish.
Feedback