- Preface
- Introduction to the CRS-3 Back-to-Back System
- Cabling for System Management, Alarms, and Network Clocking
- Cabling the CRS-3 Back-to-Back System
- Upgrading to a CRS-3 Back-to-Back System Using Cisco IOS-XR 4.3.1 or Earlier
- Upgrading to a CRS Back-to-Back System Using Cisco IOS-XR 5.1.1 or Later
Cisco CRS-3 Carrier Routing System 8-Slot Back-to-Back Cabling and Upgrade Guide
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- January 6, 2014
Feedback