New and Changed Feature Information

This table summarizes the new and changed feature information for the Interfaces Configuration Guide for Cisco 8000 Series Routers for Cisco 8000 Series Routers, and tells you where they are documented.

Interface and Hardware Component Features Added or Modified in IOS XR Release 25.x.x

This table summarizes the new and changed feature information for the Interfaces Configuration Guide for Cisco 8000 Series Routers for Cisco 8000 Series Routers, and tells you where they are documented.

Table 1. New and Changed Features
Feature Description Introduced in Release Where Documented

Unique capture for SPAN-to-File

This feature was introduced.

Release 25.2.1

SPAN to file

Unique capture for SPAN-to-File
Configure 2x200G DACs with 2x200 Breakout

This feature was introduced.

Release 25.2.1

 Configure 2x200G DACs with 2x200 Breakout

Factory reset of routers to remove SSD data

This feature was modified.

Release 25.1.1

Factory reset of routers to remove SSD data

Secure erase of router SSD data

This feature was introduced.

Release 25.1.1

Secure erase of router SSD data
Minimum-delay bin

This feature was introduced.

Release 25.1.1

Minimum delay bin

Copy TTL value to IP headers

This feature was introduced.

Release 25.1.1

Time-to-Live Uniform Mode

Integrated Routing and Bridging (IRB)

This feature was introduced.

Release 25.1.1

Configure Integrated Routing and Bridging