- Read Me First
- Policing and Shaping Overview
- IPv6 QoS: MQC Traffic Shaping
- Distribution of Remaining Bandwidth Using Ratio
- QoS Percentage-Based Shaping
- Ethernet Overhead Accounting
- MQC Traffic Shaping Overhead Accounting for ATM
- QoS Policy Accounting
- PPP Session Queueing on ATM VCs
- VP/VC Shaping for PPPoEoA/PPPoA
- Hierarchical Color-Aware Policing
- IPv6 QoS: MQC Traffic Policing
- Traffic Policing
- Policer Enhancement Multiple Actions
- Control Plane Policing
- Management Plane Protection
- Class-Based Policing
- QoS Percentage-Based Policing
- Two-Rate Policer
- Punt Policing and Monitoring
- Port-Shaper and LLQ in the Presence of EFPs
- Adaptive QoS over DMVPN
QoS: Policing and Shaping Configuration Guide
- Updated:
- January 21, 2018
Chapter: Read Me First
Read Me
First
Important Information about Cisco IOS XE 16
Effective Cisco IOS XE Release 3.7.0E (for Catalyst Switching) and Cisco IOS XE Release 3.17S (for Access and Edge Routing) the two releases evolve (merge) into a single version of converged release—the Cisco IOS XE 16—providing one release covering the extensive range of access and edge products in the Switching and Routing portfolio.
 Note | The Feature Information table in the technology configuration guide mentions when a feature was introduced. It may or may not mention when other platforms were supported for that feature. To determine if a particular feature is supported on your platform, look at the technology configuration guides posted on your product landing page. When a technology configuration guide is displayed on your product landing page, it indicates that the feature is supported on that platform. |
Feedback