--IPv6 provider edge (PE) router. A router running a Border Gateway Protocol (BGP)-based mechanism to interconnect IPv6 islands
over a Multiprotocol Label Switching (MPLS)-enabled IPv4 cloud.
--Provider edge router providing Border Gateway Protocol (BGP)-Multiprotocol Label Switching (MPLS) IPv6 Virtual Private Network
(VPN) service over an IPv4-based MPLS core. It is a IPv6 VPN provider edge (PE), dual-stack router that implements 6PE concepts
on the core-facing interfaces.
--Border Gateway Protocol. An interdomain routing protocol designed for the global Internet. Exterior Border Gateway Protocols
(eBGPs) communicate among different autonomous systems. Interior Border Gateway Protocols (iBGPs) communicate among routers
within a single autonomous system.
--customer edge router. A router that is part of a customer network and interfaces to a provider edge (PE) router.
--An advanced Layer 3 IP switching technology. It optimizes network performance and scalability for all kinds of networks.
--external Border Gateway Protocol.
--A process for helping an RP restart after a node failure has occurred.
--Interior Border Gateway Protocol.
--In Service Software Upgrade. Software upgrade without service interruption.
--Label Distribution Protocol. A standard protocol between Multiprotocol Label Switching (MPLS)-enabled routers to negotiate
the labels (addresses) used to forward packets.
--Multiprotocol Label Switching. A switching method that forwards IP traffic using a label. This label instructs the routers
and switches in the network where to forward the packets based on preestablished IP routing information.
--nonstop forwarding. The ability of a router to continue to forward traffic to a router that may be recovering from a failure.
Also, the ability of a router recovering from a failure to continue to correctly forward traffic sent to it by a peer.
--provider edge router. The PE router is the entry point into the service provider network. The PE router is typically deployed
on the edge of the network and is administered by the service provider. The PE router is the redistribution point between
EIGRP and BGP in PE to CE networking.
--Routing Information Base. Also called the routing table.
--stateful switchover. SSO refers to the implementation of Cisco IOS XE software that allows applications and features to
maintain a defined state between an active and standby RP. When a switchover occurs, forwarding and sessions are maintained.
Along with NSF, SSO makes an RP failure undetectable to the network.
--Enables IP traffic to travel securely over a public TCP/IP network by encrypting traffic from one network to another. A
VPN uses tunneling to encrypt all information at the IP level.
--Virtual Private Network (VPN) routing and forwarding instance. A VRF consists of an IP routing table, a derived routing
table, a set of interfaces that use the forwarding table. and a set of rules and routing information that defines a customer
VPN site that is attached to a provider edge (PE) router.