The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Contents
A - E - F - I - M - O - R - S - T - U - V
Index
A
auto-summary (RIP) command 1E
encapsulationssplit horizon for Frame Relay and SMDS, RIP 1F
Frame Relay, split horizonSMDS (Switched Multimegabit Data Service)disabled split horizon 1I
IPadvertising, definition 1split horizon, enabling and disabling 1ip rip authentication mode command 1ip rip triggered command 1ip split-horizon command 1ip summary-address rip command 1IPv6distribute lists 1prefix list operand keywords 1M
MD5 (Message Digest 5) authenticationRIP 1message URL httpmetricsRIP 1O
offset-list command 1R
RIP (Routing Information Protocol)IPauthentication 1hop count 1route summarizationsource IP address, disabling validation of 1version, specifying 1RIP for IPv6RIP router metric 1route authenticationRIP 1Routing Information Protocol (RIP)IPv6enabling 1S
secondary addressesuse in Frame Relay and SMDS (example) 1show ip rip database command 1split horizonenabling and disabling 1summary addressesentries, checking for 1T
timers basic (RIP) command 1U
UDP (User Datagram Protocol)using with RIP 1V
validate-update-source command 1