Retrieving Configuration Data from the Cisco Networking Services Trusted Server
The following example shows how to request a configuration from a trusted server at 10.1.1.1:
cns trusted-server all 10.1.1.1
exit
cns config retrieve 10.1.1.1
The following example shows how to request a configuration from a trusted server at 10.1.1.1 and to configure a Cisco Networking
Services configuration retrieve interval using the
cns
config
retrieve command:
cns trusted-server all 10.1.1.1
exit
cns config retrieve 10.1.1.1 retry 50 interval 1500
CNS Config Retrieve Attempt 1 out of 50 is in progress
Next cns config retrieve retry is in 1499 seconds (Ctrl-Shft-6 to abort this command).
..
00:26:40: %CNS-3-TRANSPORT: CNS_HTTP_CONNECTION_FAILED:10.1.1.1 -Process= "CNS config retv", ipl= 0, pid= 43
00:26:40: %CNS-3-TRANSPORT: CNS_HTTP_CONNECTION_FAILED -Process= "CNS config retv", ipl= 0, pid= 43......
cns config retrieve 10.1.1.1
Applying the Retrieved Data to the Running Configuration File
The following example shows how to check and apply configuration data retrieved from the server to running configuration
file only. The Cisco Networking Services Configuration Agent will attempt to retrieve configuration data at 30-second intervals
until the attempt is successful, or is unsuccessful five times in these attempts.
cns config retrieve 10.1.1.1 syntax-check no-persist retry 5 interval 30
Overwriting the Startup Configuration File with the Retrieved Data
The following example shows how to overwrite the startup configuration file with the configuration data retrieved from the
server. The configuration data will not be applied to the running configuration.
cns config retrieve 10.1.1.1 syntax-check no-persist retry 5 interval 30
cns config retrieve 10.1.1.1 overwrite-startup
Feedback