- Read Me First
- Using Ethernet Operations Administration and Maintenance
- Configuring Ethernet Connectivity Fault Management in a Service Provider Network
- Configuring Ethernet CFM for the Cisco ASR 1000 Router
- Configuring Ethernet Virtual Connections on the Cisco ASR 1000 Series Router
- Network Interface Device Support
- Ethernet Performance Monitoring on Untagged EFPs
- Using the IEEE 802.3ad Link Aggregation MIB
- Configuring IEEE 802.3ad Link Bundling
- ITU-T Y.1731 Performance Monitoring in a Service Provider Network
- Enabling Ethernet Local Management Interface
- Layer 2 Access Control Lists on EVCs
- Layer 2 Ethernet over GRE
- Configuring MAC Address Limiting on Service Instances Bridge Domains and EVC Port Channels
- Configuring Ethernet Local Management Interface at a Provider Edge
- Using Link Layer Discovery Protocol in Multivendor Networks
- Multichassis LACP
- ICCP Multichassis VLAN Redundancy
- MC-LAG TCN Interworking
- Configuring ITU-T Y.1731 Fault Management Functions in IEEE CFM
- Configuring IP SLAs Metro-Ethernet 3.0 (ITU-T Y.1731) Operations
- VXLAN-MCLAG Active-Active High Availability Support
- VxLAN Support
- VxLAN GPE Tunnel and VxLAN Dummy-L2 Tunnel
- EVPN VxLAN L3
- OpFlex Configuration
Carrier Ethernet Configuration Guide, Cisco IOS XE Everest 16.6
- Updated:
- July 5, 2018
Chapter: Read Me First
Read Me First
Important Information about Cisco IOS XE 16
Effective Cisco IOS XE Release 3.7.0E (for Catalyst Switching) and Cisco IOS XE Release 3.17S (for Access and Edge Routing) the two releases evolve (merge) into a single version of converged release—the Cisco IOS XE 16—providing one release covering the extensive range of access and edge products in the Switching and Routing portfolio.
Feature Information
Use Cisco Feature Navigator to find information about feature support, platform support, and Cisco software image support. An account on Cisco.com is not required.
Related References
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, using the Cisco Bug Search Tool (BST), submitting a service request, and gathering additional information, see What's New in Cisco Product Documentation.
To receive new and revised Cisco technical content directly to your desktop, you can subscribe to the . RSS feeds are a free service.
Feedback