Revised November 23, 2004
November 09, 2004
Products Affected
|
Product |
Comment |
|---|---|
|
CAT6K/7600 Communications Media Module |
All software versions |
Problem Description
The Cisco Communications Media Module will not boot or come online properly when plugged into a chassis with either of the Cisco Supervisor Engines 720-3B or 720-3BXL. The Supervisor Engine 720-3BXL causes the CMM to power down and disables all functionality. This issue only affects the 720-3B and 720-3BXL Supervisor Engines.
Problem Symptoms
The Cisco Communications Media Module will not boot or come online properly when plugged into a chassis with the Cisco Supervisor Engines 720-3B or 720-3BXL. The following errors are encountered:
%JAGGER-4-FABRICSYNCERRS: 65 Fabric sync error %JAGGER-4-FABRICSYNCERRS: 68 Fabric sync error %JAGGER-4-FABRICSYNCERRS: 66 Fabric sync error
The Supervisor Engine will eventually power down the Communications Media Module due to the errors.
Workaround/Solution
No workaround is available at this time. The Cisco Communications Media Module does not operate with the Cisco Supervisor Engines 720-3B or 720-3BXL. Official support for the Cisco Supervisor Engines will be available in Cisco IOS release 12.3(8)XY2 for the Communications Media Module.
For More Information
If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:
Receive Email Notification For New Field Notices
Product Alert Tool - Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.