Downloads |
Document ID: 12232
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Compatibility Table
NetPro Discussion Forums - Featured Conversations
Related Information
Introduction
The table in this document provides a list of Cisco platforms and their support for either Nonreturn to Zero (NRZ), Nonreturn to Zero Inverted (NRZI), or both.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
This document is not restricted to specific software or hardware versions.
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.
Conventions
For more information on document conventions, refer to the Cisco Technical Tips Conventions.
Compatibility Table
|
Platform |
Support |
|---|---|
|
1600 |
NRZ and NRZI (software selectable) |
|
1700 |
NRZ and NRZI (software selectable) |
|
2500 |
NRZ and NRZI (software selectable) |
|
2600 |
NRZ and NRZI (software selectable) |
|
3000 (3101 3102 3103 3202) |
NRZ only |
|
3000 (3104 3204) |
NRZ and NRZI (software selectable) |
|
3600 (3620 3640) |
NRZ and NRZI (software selectable) |
|
4000/4500/4700 |
NRZ and NRZI (software selectable; jumper selectable on 2-port serial NRZ or NRZI) |
|
7000/7200/7500 |
NRZ and NRZI (software selectable) |
|
AS5100/AS5200 |
NRZ and NRZI (software selectable) |
|
A/C/M Normal appliques |
NRZ only |
|
NRZI applique |
NRZ and NRZI (hardware selectable) |
Note: “Software selectable” means that you can issue the Cisco IOS® software configuration command nrzi-encoding to enable and disable NRZI.
NetPro Discussion Forums - Featured Conversations
| NetPro Discussion Forums - Featured Conversations for IBM |
| Network Infrastructure: Enterprise Data Centers |
Related Information
| Updated: Sep 09, 2005 | Document ID: 12232 |