Downloads |
Document ID: 12227
Contents
Introduction
Before You Begin
Conventions
Prerequisites
Components Used
Flow Diagrams
Point-to-Point without Contention
Point-to-Point with Contention
Point-to-Point with Contention (Delayed Response)
Point-to-Point with Contention (Delayed Request)
Multi-Point
Local-ACK for 3270
Related Information
Introduction
This document provides configurations for IBM bisync.
Before You Begin
Conventions
For more information on document conventions, see the Cisco Technical Tips Conventions.
Prerequisites
There are no specific prerequisites for this document.
Components Used
This document is not restricted to specific software and hardware versions.
The information presented in this document was created from devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If you are working in a live network, ensure that you understand the potential impact of any command before using it.
Flow Diagrams
Point-to-Point without Contention
This diagram configures point-to-point without contention.
Point-to-Point with Contention
This diagram configures point-to-point with contention.
Point-to-Point with Contention (Delayed Response)
This diagram configures point-to-point with contention (delayed response).
Point-to-Point with Contention (Delayed Request)
This diagram configures point-to-point with contention (delayed request).
Multi-Point
This diagram configures multi-point.
Local-ACK for 3270
This diagram configures local-ACK for 3270.
Related Information
| Updated: Sep 09, 2005 | Document ID: 12227 |