Document ID: 15087
Contents
Introduction
Before You Begin
Conventions
Prerequisites
Components Used
To Load the IOS Documentation CD on a Windows 2000 Machine
Related Information
Introduction
If you're loading the Cisco IOS® Software Documentation CD on a Microsoft Windows 2000 machine, and you are using a CD produced prior to July 2000, the documentation files may not load properly. This document provides a workaround for the Windows 2000 users.
Before You Begin
Conventions
For more information on document conventions, see the Cisco Technical Tips Conventions.
Prerequisites
There are no specific prerequisites for this document.
Components Used
This document is not restricted to specific software and hardware versions.
The information presented in this document was created from devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If you are working in a live network, ensure that you understand the potential impact of any command before using it.
To Load the IOS Documentation CD on a Windows 2000 Machine
Follow the instructions provided below:
-
Uninstall any previously installed IOS Documentation files.
-
In Start --> Run, type regedit and press Enter.
-
Locate the following key:
HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/IE4/Setup/Path.
-
Change the value from "%programfiles%\Internet Explorer" to the location where Microsoft Internet Explorer is installed on your computer, for example "C:\Program Files\Internet Explorer". Close the regedit window.
-
Install the IOS Documentation CD.
Related Information
| Updated: Jul 07, 2005 | Document ID: 15087 |