BGP performs interdomain routing in Transmission-Control Protocol/Internet Protocol (TCP/IP) networks. BGP is an exterior gateway protocol (EGP), which means that it performs routing between multiple autonomous systems or domains and exchanges routing and reachability information with other BGP systems.
Technology Information
Technology Q&A
(All IP Routing Technology Q&A)
Technology White Paper
(All IP Routing Technology White Paper)
(All IP Routing Technology Q&A)
Technology White Paper
(All IP Routing Technology White Paper)
Design
Design TechNotes
(All IP Routing Design TechNotes)
(All IP Routing Design TechNotes)
BGP Best Path Selection Algorithm
BGP Peer Groups
How BGP Routers Use the Multi-Exit Discriminator for Best Path Selection
How Does Load Balancing Work?
How the bgp deterministic-med Command Differs from the bgp always-compare-med Command
Removing Private Autonomous System Numbers in BGP
Route-Maps for IP Routing Protocol Redistribution Configuration
Specifying a Next Hop IP Address for Static Routes
Understanding Policy Routing
Understanding Route Aggregation in BGP
What Is Administrative Distance?
When Are ICMP Redirects Sent?
BGP Peer Groups
How BGP Routers Use the Multi-Exit Discriminator for Best Path Selection
How Does Load Balancing Work?
How the bgp deterministic-med Command Differs from the bgp always-compare-med Command
Removing Private Autonomous System Numbers in BGP
Route-Maps for IP Routing Protocol Redistribution Configuration
Specifying a Next Hop IP Address for Static Routes
Understanding Policy Routing
Understanding Route Aggregation in BGP
What Is Administrative Distance?
When Are ICMP Redirects Sent?
Configure
Configuration Examples and TechNotes
(All IP Routing Configuration Examples and TechNotes)
(All IP Routing Configuration Examples and TechNotes)
ASA/PIX: BGP through ASA Configuration Example
BGP Policy Accounting and BGP Policy Accounting Output Interface Accounting Features
Compatible Systems Setup Guides: BGP Configuration Guide
Configuring a Gateway of Last Resort Using IP Commands
Configuring and Verifying the BGP Conditional Advertisement Feature
Configuring Single Router Mode Redundancy and BGP on a Cat6000 MSFC
Configuring the BGP Local-AS Feature
Configuring the BGP Maximum-Prefix Feature
Host and Subnet Quantities
How the bgp deterministic-med Command Differs from the bgp always-compare-med Command
How to Use HSRP to Provide Redundancy in a Multihomed BGP Network
Load Sharing with BGP in Single and Multihomed Environments: Sample Configurations
Sample Configuration for BGP with Two Different Service Providers (Multihoming)
Sample Configuration for iBGP and eBGP With or Without a Loopback Address
Sample Configuration for Removing Private AS Numbers in BGP
Understanding Policy Routing
Using BGP Community Values to Control Routing Policy in Upstream Provider Network
Using Regular Expressions in BGP
BGP Policy Accounting and BGP Policy Accounting Output Interface Accounting Features
Compatible Systems Setup Guides: BGP Configuration Guide
Configuring a Gateway of Last Resort Using IP Commands
Configuring and Verifying the BGP Conditional Advertisement Feature
Configuring Single Router Mode Redundancy and BGP on a Cat6000 MSFC
Configuring the BGP Local-AS Feature
Configuring the BGP Maximum-Prefix Feature
Host and Subnet Quantities
How the bgp deterministic-med Command Differs from the bgp always-compare-med Command
How to Use HSRP to Provide Redundancy in a Multihomed BGP Network
Load Sharing with BGP in Single and Multihomed Environments: Sample Configurations
Sample Configuration for BGP with Two Different Service Providers (Multihoming)
Sample Configuration for iBGP and eBGP With or Without a Loopback Address
Sample Configuration for Removing Private AS Numbers in BGP
Understanding Policy Routing
Using BGP Community Values to Control Routing Policy in Upstream Provider Network
Using Regular Expressions in BGP
Troubleshoot and Alerts
Security Advisories, Responses and Notices
(All IP Routing Security Advisories, Responses and Notices)
(All IP Routing Troubleshooting TechNotes)
(All IP Routing Security Advisories, Responses and Notices)
Cisco Security Advisory: Cisco IOS Malformed BGP Packet Causes Reload
Cisco Security Advisory: Cisco IOS Misformed BGP Packet Causes Reload
Troubleshooting TechNotesCisco Security Advisory: Cisco IOS Misformed BGP Packet Causes Reload
(All IP Routing Troubleshooting TechNotes)
Achieve Optimal Routing and Reduce BGP Memory Consumption
BGP Best Path Selection Algorithm
BGP Case Studies
BGP Peer Groups
BGP Policy Accounting and BGP Policy Accounting Output Interface Accounting Features
Configuring a Gateway of Last Resort Using IP Commands
Host and Subnet Quantities
How BGP Routers Use the Multi-Exit Discriminator for Best Path Selection
How Does Load Balancing Work?
How the bgp deterministic-med Command Differs from the bgp always-compare-med Command
How to Block One or More Networks From a BGP Peer
IP Addressing and Subnetting for New Users
Removing Private Autonomous System Numbers in BGP
Route Selection in Cisco Routers
Route-Maps for IP Routing Protocol Redistribution Configuration
Specifying a Next Hop IP Address for Static Routes
The "%TUN-5-RECURDOWN" Error Message and Flapping EIGRP/OSPF/BGP Neighbors Over a GRE Tunnel
Troubleshooting BGP
Troubleshooting Flapping BGP Routes (Recursive Routing Failure)
Troubleshooting High CPU Caused by the BGP Scanner or BGP Router Process
Troubleshooting When BGP Routes Are Not Advertised
Understanding Policy Routing
Understanding Redistribution of OSPF Routes into BGP
Understanding Route Aggregation in BGP
Using Regular Expressions in BGP
Using the Extended ping and Extended traceroute Commands
What Does the "#%BGP-3-INSUFCHUNKS: Insufficient chunk pools for aspath" Error Message Mean?
What Is Administrative Distance?
When Are ICMP Redirects Sent?
Why Do BGP Neighbors Toggle Between Idle, Connect, and Active States?
BGP Best Path Selection Algorithm
BGP Case Studies
BGP Peer Groups
BGP Policy Accounting and BGP Policy Accounting Output Interface Accounting Features
Configuring a Gateway of Last Resort Using IP Commands
Host and Subnet Quantities
How BGP Routers Use the Multi-Exit Discriminator for Best Path Selection
How Does Load Balancing Work?
How the bgp deterministic-med Command Differs from the bgp always-compare-med Command
How to Block One or More Networks From a BGP Peer
IP Addressing and Subnetting for New Users
Removing Private Autonomous System Numbers in BGP
Route Selection in Cisco Routers
Route-Maps for IP Routing Protocol Redistribution Configuration
Specifying a Next Hop IP Address for Static Routes
The "%TUN-5-RECURDOWN" Error Message and Flapping EIGRP/OSPF/BGP Neighbors Over a GRE Tunnel
Troubleshooting BGP
Troubleshooting Flapping BGP Routes (Recursive Routing Failure)
Troubleshooting High CPU Caused by the BGP Scanner or BGP Router Process
Troubleshooting When BGP Routes Are Not Advertised
Understanding Policy Routing
Understanding Redistribution of OSPF Routes into BGP
Understanding Route Aggregation in BGP
Using Regular Expressions in BGP
Using the Extended ping and Extended traceroute Commands
What Does the "#%BGP-3-INSUFCHUNKS: Insufficient chunk pools for aspath" Error Message Mean?
What Is Administrative Distance?
When Are ICMP Redirects Sent?
Why Do BGP Neighbors Toggle Between Idle, Connect, and Active States?
