Cisco Unified IP Phone Model 7905G and 7912G Administration Guide for Cisco Unified CallManager Release 4.2 and later - Updating Firmware for the Cisco Unified IP Phone [Cisco Unified IP Phone 7900 Series]

Table Of Contents

Updating Firmware for the Cisco Unified IP Phone

Updating Firmware for the Cisco Unified IP Phone

You can use the upgradecode parameter in a profile file to provide special upgrade instructions for the Cisco Unified IP Phone 7902G, 7905G, and 7912G.

For detailed information about using profile files, see "Additional Configuration Methods and Parameters."

To provide upgrade instructions to a phone, add the following line to the Cisco Unified IP Phone profile file:
upgradecode:3,type,0x0400,0x0100,tftp_server_ip,69,image_id, 
image_file_name
where:

•type is 0x401 for the Cisco Unified IP Phone 7902G, 0x501 for the Cisco Unified IP Phone 7905G, or 0x601 for the Cisco Unified IP Phone 7912G.

•tftp_server_ip is the IP address of the TFTP server on which the firmware upgrade image is stored. Enter 0 to use the TFTP server specified by the TFTPServer1 parameter or by DHCP.

•image_id is a unique 32-bit integer value. This value must be different for each upgrade. For this value, it is convenient to use 0x followed by the build date on the image file name. (For example, if the image file name is CP79050101SCCP030323A.ZUP, then the build date is 30323A, and image_id would be 0x30323A.)

•image_file_name is the file name of the firmware upgrade image.

	Cisco Unified IP Phone Model 7905G and 7912G Administration Guide for Cisco Unified CallManager Release 4.2 and later
	Updating Firmware for the Cisco Unified IP Phone
Cisco Unified IP Phone Model 7905G and 7912G Administration Guide for Cisco Unified CallManager Release 4.2 and later Index Preface Overview of the Cisco Unified IP Phone Preparing to Install the Cisco Unified IP Phone on Your Network Setting Up the Cisco Unified IP Phone Configuring Network Settings on the Cisco Unified IP Phone Configuring Features, Services, Templates, and Users Viewing Status, Statistics, Model, and Firmware Information on the Cisco Unified IP Phone Troubleshooting the Cisco Unified IP Phone Additional Configuration Methods and Parameters Providing Information to Users Via a Website Supporting International Users Updating Firmware for the Cisco Unified IP Phone Changing the Graphic on the Cisco Unified IP Phone Screen Technical Specifications	Download this chapter Updating Firmware for the Cisco Unified IP Phone Download the complete book Cisco Unified IP Phone Models 7905G and 7912G Administration Guide for Cisco Unified CallManager Release 4.2 (PDF - 3 MB) Feedback Table Of Contents Updating Firmware for the Cisco Unified IP Phone Updating Firmware for the Cisco Unified IP Phone You can use the upgradecode parameter in a profile file to provide special upgrade instructions for the Cisco Unified IP Phone 7902G, 7905G, and 7912G. For detailed information about using profile files, see "Additional Configuration Methods and Parameters." To provide upgrade instructions to a phone, add the following line to the Cisco Unified IP Phone profile file: upgradecode:3,type,0x0400,0x0100,tftp_server_ip,69,image_id, image_file_name where: •type is 0x401 for the Cisco Unified IP Phone 7902G, 0x501 for the Cisco Unified IP Phone 7905G, or 0x601 for the Cisco Unified IP Phone 7912G. •tftp_server_ip is the IP address of the TFTP server on which the firmware upgrade image is stored. Enter 0 to use the TFTP server specified by the TFTPServer1 parameter or by DHCP. •image_id is a unique 32-bit integer value. This value must be different for each upgrade. For this value, it is convenient to use 0x followed by the build date on the image file name. (For example, if the image file name is CP79050101SCCP030323A.ZUP, then the build date is 30323A, and image_id would be 0x30323A.) •image_file_name is the file name of the firmware upgrade image.
	Terms & Conditions \| Privacy Statement \| Cookie Policy \| Trademarks