Cisco Wireless LAN Controller System Message Guide, Release 7.3
CLI CLIWEB and CNFGR System Messages
Downloads: This chapterpdf (PDF - 118.0KB) The complete bookPDF (PDF - 5.34MB) | Feedback

CLI CLIWEB and CNFGR System Messages

Table Of Contents

CLI CLIWEB and CNFGR System Messages

CLI Messages

CLIWEB Messages

CNFGR Messages


CLI CLIWEB and CNFGR System Messages


This chapter contains the following topics:

CLI Messages

CLIWEB Messages

CNFGR Messages

CLI Messages

This section contains command-line interface (CLI) messages.

Error Message    %CLI-3-INVALID_AP_KEY: Invalid AP Hash Key Provided 

Explanation    The system has detected an invalid AP Hash Key provided.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %CLI-3-LOGIN_FAILED: Login failed. User:[chars], Service type:[dec]. 
[chars]. 

Explanation    Login failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %CLI-1-TRACE_LEVEL_ALERT: Level Alert. 

Explanation    The system has tested if the trace level Alert is enabled or not.

Recommended Action    No action is required. This is for testing purposes only.

Error Message    %CLI-2-TRACE_LEVEL_CRIT: Level Critical. 

Explanation    The system has tested if the trace level Critical is enabled or not.

Recommended Action    No action is required. This is for testing purposes only.

Error Message    %CLI-7-TRACE_LEVEL_DEB: Level Debug. 

Explanation    The system has tested if the trace level Debug is enabled or not.

Recommended Action    No action is required. This is for testing purposes only.

Error Message    %CLI-0-TRACE_LEVEL_EMER: Level Emergency. 

Explanation    The system has tested if the trace level Emergency is enabled or not.

Recommended Action    No action is required. This is for testing purposes only.

Error Message    %CLI-3-TRACE_LEVEL_ERR: Level Error. 

Explanation    The system has tested if the trace level Error is enabled or not.

Recommended Action    No action is required. This is for testing purposes only.

Error Message    %CLI-6-TRACE_LEVEL_INFO: Level information. 

Explanation    The system has tested if the trace level Information is enabled or not.

Recommended Action    No action is required. This is for testing purposes only.

Error Message    %CLI-5-TRACE_LEVEL_NOT: Level Notice. 

Explanation    The system has tested if the trace level Notice is enabled or not.

Recommended Action    No action is required. This is for testing purposes only.

Error Message    %CLI-4-TRACE_LEVEL_WARN: Level Warning. 

Explanation    The system has tested if the trace level Warning is enabled or not.

Recommended Action    No action is required. This is for testing purposes only.

CLIWEB Messages

This section contains web command-line interface (CLIWEB) messages.

Error Message    %CLIWEB-3-BAD_LOGO_FILENAME: File [chars] does not exist as a logo. 
Clearing.. 

Explanation    The file does not exist as a logo.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %CLIWEB-3-BUFFER_TOO_LONG: Buffer for [chars] too long (max = [dec] 
chars). 

Explanation    The buffer is too long.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %CLIWEB-3-BUFFER_TOO_SMALL: Buffer for [chars] too small 

Explanation    The buffer is too small.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %CLIWEB-3-INDEX_OUT_OF_RANGE: Index:[chars] out of range [dec] (max = 
[dec]). 

Explanation    The index is out of range.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %CLIWEB-3-INIT_FAILED: Unable to initialize. Reason: [chars]. 

Explanation    The system is unable to initialize.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %CLIWEB-3-INVALID_PORT_SPEED: Unknown Port Speed found for interface 
[dec]/[dec]/[dec]. 

Explanation    The system has found an unknown port speed for the interface.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %CLIWEB-3-SOCKET_OPER_FAILED: Failed to [chars] the Java Socket. 

Explanation    A failure has occurred in a Java socket.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %CLIWEB-3-WEBAUTH_ENABLE_FAILED: External Web Auth cannot be enabled. 
[chars]. 

Explanation    External Web Auth cannot be enabled.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %CLIWEB-3-WEBAUTH_TYPESET_FAILED: External Web Auth type cannot be 
set. [chars]. 

Explanation    External Web Auth type cannot be set.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %CLIWEB-3-WEBSRVR_IPSET_FAILED: Unable to set External Web Server. 
[chars]. 

Explanation    The system is unable to set the External Web Server.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

CNFGR Messages

This section contains configuration (CNFGR) messages.

Error Message    %CNFGR-3-DUP_REGISTRATION: sysCfgChange registrar_ID [dec] already 
registered. 

Explanation    The specified Registrar ID has already registered for notifications from this module.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %CNFGR-3-GET_REGISTRY_FAIL: sysCfgChange [chars] not set. 

Explanation    The system has failed to get the registry for the specified component.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %CNFGR-0-INVALID_STARTUP_SEQ: cfgHardwareDectectCallback Invalid 
startup sequence. 

Explanation    cfgHardwareDectectCallback invalid startup sequence.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %CNFGR-3-INV_COMP_ID: Invalid Component Id : [chars] ([dec]) in 
cfgConfiguratorInit. 

Explanation    The system has detected an invalid component that was requested for initialization.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    CNFGR-0-LIC_AP_COUNT_CHANGE: AP count change: Handle = 0x%x, Type = 
%d\n.

Explanation    The number of access points has changed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %CNFGR-3-L2_SYS_INIT_FAIL: Cannot initialize a required function: 
Layer2. 

Explanation    The system could not perform Layer 2 system initialization.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %CNFGR-3-MAX_REGISTRATIONS: sysCfgChange registrar_ID [dec] greater 
then LAST_COMPONENT_ID. 

Explanation    Maximum number of registrations has been exceeded for this module.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %CNFGR-3-MGMT_IF_SET_FAIL: cfgHardwareDectectCallback: couldn't set 
mgmt vlan for vlan id [dec]. 

Explanation    The system could not set the management interface.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Recommended Action