Cisco Wireless LAN Controller System Message Guide, Release 7.3
POWER PPTP and RBCP System Messages
Downloads: This chapterpdf (PDF - 110.0KB) The complete bookPDF (PDF - 5.34MB) | Feedback

POWER PPTP and RBCP System Messages

Table Of Contents

POWER PPTP and RBCP System Messages

POWER Messages

PPTP Messages

RBCP Messages


POWER PPTP and RBCP System Messages


This chapter contains the following topics:

POWER Messages

PPTP Messages

RBCP Messages

POWER Messages

This section contains power (POWER) messages.

Error Message    %POWER-3-FAN_FAIL: [chars] 

Explanation    The specified fan is not functioning properly and has failed.

Recommended Action    No action is required.

Error Message    %POWER-3-PS_FAIL: [chars] 

Explanation    The specified power supply has failed.

Recommended Action    No action is required.

Error Message    %POWER-6-FAN_OK: [chars] 

Explanation    The specified fan is functioning normally and is OK.

Recommended Action    No action is required.

Error Message    %POWER-6-PS_DETECT: [chars] 

Explanation    This message indicates whether the power supply is present or not.

Recommended Action    No action is required.

Error Message    %POWER-6-PS_OK: [chars] 

Explanation    The specified power supply is functioning OK.

Recommended Action    No action is required.

PPTP Messages

This section contains Point-to-Point Tunneling Protocol (PPTP) messages.

Error Message    %PPTP-1-CONFIG_SAVE_ERROR: Error on call to osapiFsWrite routine on 
config file [chars]. 

Explanation    PPTP configuration changes could not be saved.

Recommended Action    Try to reconfigure PPTP parameters and save.

Error Message    %PPTP-1-LOCAL_IP_NOT_FOUND: unable to determine our own local IP 
address - pptp will be disabled. 

Explanation    The system is unable to determine the local IP address - PPTP will be disabled.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %PPTP-1-SOCKET_CONFIG_ERROR: unable to configure socket - pptp will be 
disabled... 

Explanation    An internal system error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %PPTP-1-SOCKET_CONFIG_RETRIEVE_ERROR: unable to retrieve socket 
configuration - pptp will be disabled... 

Explanation    An internal system error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %PPTP-1-SOCKET_OPEN_ERROR: Unable to open listener socket - pptp will 
be disabled... 

Explanation    An internal system error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %PPTP-1-SOCKET_SELECT_ERROR: select failed for no apparent reason - 
pptp will be disabled... 

Explanation    An internal system error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %PPTP-2-TASK_CREATE_ERROR: Failed to create pptp main task.. 

Explanation    The PPTP task has failed to start correctly.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %PPTP-2-TASK_INIT_ERROR1: Unable to open listener socket. 

Explanation    The PPTP task has failed to start correctly.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %PPTP-2-TASK_INIT_ERROR2: Unable to bind listener socket. 

Explanation    The PPTP task has failed to start correctly.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %PPTP-2-TASK_INIT_ERROR3: Unable to listen on listener socket. 

Explanation    The PPTP task has failed to start correctly.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

RBCP Messages

This section contains Router Blade Control Protocol (RBCP) messages.

Error Message    %RBCP-0-MSGQ_CREAT_FAILED: Failed to create RBCP osapi Queue. 

Explanation    The system has failed to create the RBCP OSAPI queue.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %RBCP-0-PORT_NOT_UP: Port 1 not up. Cant plumb Code version. 

Explanation    Port 1 is not up. The system cannot plumb the code version.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %RBCP-0-PROD_VER_SET_FAILED: Driver api failed for the command 
[chars].Cant plumb Code version.Return Code=[dec]. 

Explanation    The driver API has failed. The system cannot plumb the code version.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %RBCP-0-RBCP_RECVQ_NULL: No RBCP Receive Queue available. Unable to 
receive RBCP messages 

Explanation    No RBCP receive queue is available. The system is unable to receive RBCP messages.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %RBCP-0-RBCP_REGISTRATION_FAILED: RBCP registration failed.Return 
Code=[dec]. 

Explanation    RBCP registration has failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %RBCP-0-TASK_CREAT_FAILED: Failed to create RBCP receive task. 

Explanation    The system has failed to create an RBCP receive task.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %RBCP-3-PDU_TRANSMIT_FAILED: Failed to transmit the RBCP 
register.Return code=[dec]. 

Explanation    The system has failed to transmit the RBCP register.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %RBCP-3-RBCP_TX_FAILED: Failed to generate a  RBCP platform 
response.Return code=[dec]. 

Explanation    The system has failed to generate an RBCP platform response.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Recommended Action