Cisco Wireless LAN Controller System Message Guide, Release 7.3
AAA and ACL System Messages
Downloads: This chapterpdf (PDF - 226.0KB) The complete bookPDF (PDF - 5.34MB) | Feedback

AAA and ACL System Messages

Table Of Contents

AAA and ACL System Messages

AAA Messages

ACL Messages


AAA and ACL System Messages


This chapter contains the following topics:

AAA Messages

ACL Messages

AAA Messages

This section contains authentication, authorization, and accounting (AAA) messages.

Error Message    %AAA-5-AAA_AUTH_ADMIN_USER: Authentication [chars] for admin user 
'[chars]' 

Explanation    Authentication for an admin user.

Recommended Action    No action is required.

Error Message    %AAA-5-AAA_AUTH_NETWORK_USER: Authentication [chars] for network user 
'[chars]' 

Explanation    Authentication for a network user.

Recommended Action    No action is required.

Error Message    AAA-0-AAA_REPEAT_REQUEST: Authentication request already queued. 
Attempt to requeue.

Explanation    An authentication request was already detected in the request queue. The system has attempted to queue the same request again.

Recommended Action    No action is required.

Error Message    AAA-0-ARP_LOOKUP_FAIL: Default gateway ARP lookup failed.

Explanation    A default gateway ARP lookup has failed when sending a RADIUS request over a dynamic interface.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-4-ATTRITBUTE_LEN_EXCEED: ACL Name too long : [chars] 

Explanation    The ACL name is too long.

Recommended Action    No action is required.

Error Message    %AAA-4-AVP_CORRUPT: [dec]th AVP is corrupted. RADIUS msgtype=[dec]. 
Prev AVP=[dec]len=[dec] offset=[dec] numAVPs=[dec]. 

Explanation    An AVP is corrupted.

Recommended Action    No action is required.

Error Message    AAA-0-BUFF_ALLOC_FAILED: Could not allocate a system buffer. %s.

Explanation    The system could not allocate a system buffer.

Recommended Action    No action is required.

Error Message    %AAA-4-COMPUTE_AVP_SIZE_FAILED: Received bad AVP :[address] , Value 
Ptr =[address], Value Len=[dec]. 

Explanation    The system has received a bad AVP.

Recommended Action    No action is required.

Error Message    %AAA-3-CONSTRUCT_UDP_RCV_SOCKET_FAILED: Could not construct UDP RCV 
socket. [chars].([dec]:[chars])  

Explanation    The system could not construct a UDP RCV socket.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-4-COPY_AVP_BLOCK_FAILED: Could not copy AVPs to block. [chars] 

Explanation    The system could not copy the AVPs to the block.

Recommended Action    No action is required.

Error Message    %AAA-6-CREATE_AVL_TREE: Creating AVL tree with [dec] entries 

Explanation    The system has created an AVL tree with entries.

Recommended Action    No action is required.

Error Message    %AAA-6-CREATE_CONFIG_FILE: Creating default aaaFile.cfg 

Explanation    The system has created a default entity in the local database.

Recommended Action    No action is required.

Error Message    %AAA-4-CREATE_RADIUS_MES_FAILED: Could not create RADIUS message. 
[chars]. numAVPs:[dec].

Explanation    The system could not create a RADIUS message.

Recommended Action    No action is required.

Error Message    %AAA-3-CREATE_USR_TREE_FAILED: Could not create user AVL tree. 
Resason:[chars].

Explanation    The system could not create a user AVL tree.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-6-DB_ADD_BLACKLIST_USR: Adding blacklist user '[chars]' to AAA 
database.

Explanation    The system has added a blacklist user to the AAA database.

Recommended Action    No action is required.

Error Message    %AAA-6-DB_ADD_USER: Adding user '[chars]' to AAA database.

Explanation    The system has added a user to the AAA database.

Recommended Action    No action is required.

Error Message    %AAA-3-DB_INIT_FAILED: Error [dec] initializing database module 
[chars].

Explanation    An error has occurred while initializing the database module.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-3-DB_MODULE_INIT_FAILED: Could not initialize module [chars]. 
[chars]. 

Explanation    The system could not initialize a module.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-3-DB_RECORD_ADD_FAILED: Could not add record to database. 
[chars]. 

Explanation    The system could not add a record to the database.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-6-DELETE_CLIENT_ACCOUNT_DELETED: Delete client 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex]because user account ([chars]) has been 
deleted.  

Explanation    The system deleted the specified client because the user account was deleted.

Recommended Action    No action is required.

Error Message    %AAA-6-DELETE_CLIENT_GUEST_ACCOUNT_EXPIRE: Delete client 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex]because guest user account ([chars]) is 
expired 

Explanation    The system has deleted a client because a guest user account had expired.

Recommended Action    No action is required.

Error Message    %AAA-3-EAPMETHOD_ADD_FAILED: Unable to add method '[chars]' to EAP 
profile for user '[chars]'. [chars]. 

Explanation    The system is unable to add a method to the EAP profile for the user.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-3-EAPPROF_ADD_FAILED: Unable to add EAP profile for user 
'[chars]'. [chars].

Explanation    The system is unable to add an EAP profile for a particular user.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-3-FREELIST_ADD_FAILED: Unable to add to free list. [chars]. 

Explanation    The system is unable to add to the free list.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-3-FREELIST_DEL_FAILED: Unable to delete to free list. [chars]. 

Explanation    The system is unable to delete to the free list.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-6-FUNC_RUNNING: Running [chars]... 

Explanation    The system is running.

Recommended Action    No action is required.

Error Message    %AAA-3-GET_GUEST_START_TIME_FAILED: Could not get start time for guest 
user record. [chars]. 

Explanation    The system could not get a start time for a guest user record.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    AAA-0-GET_MTU_FAIL: Unable to get MTU for Interface no:%d.

Explanation    The system has failed to get a maximum transmission unit (MTU) for an interface.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-4-GET_RADIUS_PROXYSTATE_FAILED: Could not get proxy state. 
[chars]. 

Explanation    The system could not get a proxy state.

Recommended Action    No action is required.

Error Message    AAA-0-GET_SOCK_INFO_FAIL: Get sockname system call failed.

Explanation    The system has failed to get the source UDP port number.

Recommended Action    No action is required.

Error Message    %AAA-6-GUEST_ACCOUNT_CREATE: Guest user account ([chars]) is created 
with lifetime ([dec]).

Explanation    A guest user account has been created.

Recommended Action    No action is required.

Error Message    %AAA-6-GUEST_ACCOUNT_EXPIRE: Guest user account ([chars]) is expired 

Explanation    A guest user account has been created.

Recommended Action    No action is required.

Error Message    %AAA-3-GUEST_INFO_MALLOC_FAILED: Unable to allocate memory for guest 
account information of user [chars]. 

Explanation    The system is unable to allocate memory for guest account information.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-4-GUESTACCT_TIMERSET_FAILED: Unable to set timer for guest 
accounts. [chars]. 

Explanation    The system is unable to set the timer for guest accounts.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-4-GUESTUSER_DEL_FAILED: Unable to delete the user '[chars]'. 
[chars]. 

Explanation    The system is unable to delete the user from the database.

Recommended Action    No action is required.

Error Message    %AAA-4-INVALID_AUTHENTICATOR: Unable to verify RADIUS message 
authenticator for mobile[hex]:[hex]:[hex]:[hex]:[hex]:[hex]. [chars] 

Explanation    The system has detected an invalid RADIUS message authenticator for the mobile device.

Recommended Action    No action is required.

Error Message    %AAA-4-INVALID_AUTH_REQ_TYPE: Invalid RADIUS authentication type [int] 
in AAA request 

Explanation    The system has detected an invalid RADIUS authentication type in the AAA request.

Recommended Action    No action is required.

Error Message    %AAA-4-INVALID_DATA_STRUCT: Could not validate the data structure - 
[chars]. 

Explanation    The system could not validate a data structure.

Recommended Action    No action is required.

Error Message    %AAA-4-INVALID_MESSAGE_AUTHENTCATOR: Invalid message authenticator 
received in [chars] from[dec].[dec].[dec].[dec] 

Explanation    The system has detected an invalid message authenticator.

Recommended Action    No action is required.

Error Message    %AAA-4-INVALID_RADIUS_PKT_SIZE: RADIUS packet too small. 

Explanation    A RADIUS packet is less than its minimum size.

Recommended Action    No action is required.

Error Message    %AAA-3-INVALID_REQUEST: Invalid AAA request. [chars] 

Explanation    The system has received an AAA request with a null or invalid payload.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-4-INVALID_REQUEST_TYPE: Received an invalid request type.([hex]). 

Explanation    The system has received an invalid request type that is not related to AAA or accounting.

Recommended Action    No action is required.

Error Message    AAA-0-IP_FRAG_FAIL: IP fragmentation failed error code :%d.

Explanation    The system has failed to do an IP fragmentation.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-3-LDAP_CONNECT_SERVER_FAILED: LDAP DB Task [[dec]]: Connect to 
server failed (retry [dec]), rc= [dec] ([chars]) 

Explanation    An LDAP DB task connect to the server has failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-3-LDAP_COPY_ATTR_FAILED: Could not copy attributes returned by 
LDAP server. [chars]. Max AVPs: [int]. Max Ints: [dec]. 

Explanation    The system could not copy attributes returned by the LDAP server.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-4-LDAPMSG_SEND_FAILED: Could not send a message to LDAP task. 
[chars]. 

Explanation    The system could not send a message to the LDAP task.

Recommended Action    No action is required.

Error Message    %AAA-3-LDAP_TASK_FAILED: The main LDAP task failed. [chars]. Index: 
[dec]. Type: [dec]. 

Explanation    The main LDAP task failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-3-LDAP_TIMER_CALLBACK_FAILED: Could not perform timer callback. 
[chars]. 

Explanation    The system could not perform a timer callback.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-3-LIFETIME_SET_FAILED: Unable to reset the lifetime of [chars] 
account [chars] in localdatabase.

Explanation    The system is unable to reset the lifetime of an account in the local database.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-4-LIFETIME_VALUE_CORRUPT: Corrupted value of lifetime for guest 
user [chars]. 

Recommended Action    The value of the lifetime for a guest user is corrupted.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-3-MEM_ALLOC_FAILED: Error allocating [dec] bytes on stack for 
message. Aborting.. 

Explanation    An error has occurred when allocating memory off the stack for a message. The system is aborting.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-4-MESSAGE_TYPE_UNKNOWN: Unable to send AAA request, Unknown 
message type :[dec] 

Explanation    The system is unable to send an AAA request, because of an unknown message type.

Recommended Action    No action is required.

Error Message    %AAA-4-MSCB_NOT_FOUND: Unable to find Mobile Station Entry for 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] . 

Explanation    The system is unable to find the Mobile Station Entry.

Recommended Action    No action is required.

Error Message    %AAA-4-MSG_RECV_FAILED: Failed to receive an incoming message. Error 
= [dec]:[chars]. 

Explanation    The system has failed to receive an incoming message.

Recommended Action    No action is required.

Error Message    AAA-0-PDU_TRANSMIT_FAILED: Failed to transmit the PDU for the command 
%s.Return code:%d.

Explanation    The system has failed to transmit the RADIUS request, a protocol data unit (PDU), to the service class provider (SCP).

Recommended Action    No action is required.

Error Message    %AAA-4-PROCESS_ACC_FAILED: The system could not process accounting 
type [hex]. [chars].  

Explanation    The system could not process an accounting type.

Recommended Action    No action is required.

Error Message    %AAA-4-PROC_PROXY_REQ_FAILED: Could not process proxy request. 
[chars]. RADIUSLength=[dec] , Transport Len =[dec], Message code=[dec]. 

Explanation    The system could not process a proxy request.

Recommended Action    No action is required.

Error Message    %AAA-4-PROC_PROXY_RESP_FAILED: Could not process a proxy RADIUS 
response. [chars]. RADIUS Length=[dec], Transport Length=[dec], Message 
Code=[dec]. 

Explanation    The system could not process a RADIUS response.

Recommended Action    No action is required.

Error Message    %AAA-4-PROC_RADIUS_RESP_FAILED: The system could not process RADIUS 
response. [chars]. ResponseLength: [dec], Server: [dec].[dec].[dec].[dec] , 
ID:[dec] , Mobile:[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    The system could not process a RADIUS response.

Recommended Action    No action is required.

Error Message    %AAA-3-PROXY_REQ_VALID_CRED_FAILED: Could not validate proxied request 
credentials. [chars].STA: [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    The system could not validate the proxy request credentials.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    AAA-0-AAA_PSTATS_NULL: For Radius server[%s] attempt to access pStats 
field which is NULL.

Explanation    The RADIUS server pStats attribute is encountered as Null.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-4-RADACCTSRVR_STATESET_FAILED: Unable to set state of RADIUS 
accounting server [dec] to [dec]. [chars]. 

Explanation    The system is unable to set the state of a particular RADIUS accounting server.

Recommended Action    No action is required.

Error Message    %AAA-4-RADAUTHSRVR_STATESET_FAILED: Unable to set state of RADIUS 
authentication server [dec] to [dec]. [chars]. 

Explanation    The system is unable to set the state of a particular RADIUS authentication server.

Recommended Action    No action is required.

Error Message    %AAA-4-RADCLIENT_NOT_FOUND: RADIUS client [int].[int].[int].[int] not 
found in client list. 

Explanation    A RADIUS client is not found in the client list.

Recommended Action    No action is required.

Error Message    %AAA-6-RADIUS_IN_GLOBAL_LIST: RADIUS server 
[int].[int].[int].[int]:[int] [chars] in global list 

Explanation    A RADIUS server is in the global list.

Recommended Action    No action is required.

Error Message    %AAA-4-RADIUSMSG_SEND_FAILED: Unable to send RADIUS message to 
[chars]([int].[int].[int].[int]):[int] 
(MAC:[hex]:[hex]:[hex]:[hex]:[hex]:[hex]). Reason : [chars]. 

Explanation    The system is unable to send a RADIUS message to a specific host.

Recommended Action    No action is required.

Error Message    %AAA-6-RADIUS_ON_WLAN: RADIUS server [int].[int].[int].[int]:[int] 
[chars] on WLAN [int] 

Explanation    A RADIUS server is on a WLAN.

Recommended Action    No action is required.

Error Message    %AAA-4-RADIUS_RESPONSE_FAILED: RADIUS server 
[int].[int].[int].[int]:[int] failed to respond to request(ID [int]) for STA 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] / user '[chars]' 

Explanation    A RADIUS server failed to respond to a request for STA.

Recommended Action    No action is required.

Error Message    %AAA-4-RADIUS_RES_TRUNC: Truncating RADIUS response from server at AVP 
code [dec] for message [dec]  

Explanation    The system is truncating a RADIUS response from a server at the AVP code for a message.

Recommended Action    No action is required.

Error Message    %AAA-4-RADSERVER_NOT_FOUND: Could not find appropriate RADIUS server 
for WLAN [dec] - [chars] 

Explanation    Client authentication failed because a valid RADIUS server could not be found to service the request.

Recommended Action    Verify the RADIUS server configuration and connectivity.

Error Message    %AAA-4-RCV_FROM_UNKNOWN_SERVER: Received a [chars] from unknown server 
[int].[int].[int].[int]:[int] 

Explanation    The system has received a message from an unknown server.

Recommended Action    No action is required.

Error Message    %AAA-4-RCV_FROM_WRONG_PRT: RADIUS msg received from wrong switchport, 
[dec], dropping 

Explanation    A RADIUS message has been received from a wrong switchport, and the message is being dropped.

Recommended Action    No action is required.

Error Message    %AAA-4-RCV_PKT_TO_RFC3576_PRT_FAILED: Received an unexpected [chars] 
from [dec].[dec].[dec].[dec] 

Explanation    The system has received an unexpected message.

Recommended Action    No action is required.

Error Message    AAA-0-RCV_WITH_WRONG_ENCAP: RADIUS msg with unexpected encapsulation, 
dropping.

Explanation    A RADIUS message was ignored because the encapsulation was invalid.

Recommended Action    No action is required.

Error Message    %AAA-4-REBUILD_DEFAULT_CONFIG: Rebuilding the default configuration 
for '[chars]' 

Explanation    The system is rebuilding the default configuration.

Recommended Action    No action is required.

Error Message    %AAA-6-RECREATE_ADMIN_LOGIN: Recreating admin login. 

Explanation    The system is recreating the default admin login.

Recommended Action    No action is required.

Error Message    %AAA-6-RECREATE_ADMIN_USR: Recreated the admin user. 

Explanation    The system created the admin user again on the local database.

Recommended Action    No action is required.

Error Message    %AAA-4-RFC3576_REXMT_FAILED: Could not retransmit RFC-3576 message to 
[int].[int].[int].[int]:[int]. [chars].  

Explanation    The system could not retransmit the RFC-3576 message to the host.

Recommended Action    No action is required.

Error Message    %AAA-3-RFC_SOCKET_ERROR: RFC3576 socket error [dec] on socket [dec] 

Explanation    An RFC-3576 socket error has occurred on a socket.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-4-SEND_AAA_RESPONSE_FAILED: Could not send AAA response. [chars]. 

Explanation    The system could not send an AAA response.

Recommended Action    No action is required.

Error Message    %AAA-4-SEND_RFC_RESPONSE_FAILED: Could not send RFC-3576 response. 
[chars].  

Explanation    The system could not send the RFC-3576 response.

Recommended Action    No action is required.

Error Message    %AAA-4-SEND_TPLUS_MES_FAILED: Could not send TACACS+ message. 
[chars].([dec]:[chars]). 

Explanation    The system could not send a TACACS+ message.

Recommended Action    No action is required.

Error Message    %AAA-4-SET_SERVER_FAILED: Could not set RADIUS server. [chars]. 

Explanation    The system could not set the RADIUS server.

Recommended Action    No action is required.

Error Message    %AAA-4-SUPPLY_UNAME_PASS: Username & password must be supplied. User 
: [address], Pass: [address]. 

Explanation    The username and password must be supplied.

Recommended Action    No action is required.

Error Message    %AAA-5-SYN_CALLBACK_FAILED: AAA Sync.Callback failed. [chars]. 

Explanation    The AAA Sync.Callback has failed.

Recommended Action    No action is required.

Error Message    %AAA-3-TEST_NULL_FAILED: Unable to allocate memory off the stack. 

Explanation    The system is unable to allocate memory off the stack for testing null attributes.

Recommended Action    This is a debug message only. No action is required.

Error Message    %AAA-4-TPLUS_SERVER_NOT_FOUND: TACACS+ server not found. [chars] 

Explanation    The TACACS+ server was not found.

Recommended Action    No action is required.

Error Message    %AAA-4-TPLUS_SWITCHOVER_FAILED: TACACS+ server switchover failed. 
Current server is  [dec].[dec].[dec].[dec]. 

Explanation    The TACACS+ server switchover has failed.

Recommended Action    No action is required.

Error Message    %AAA-5-TPLUS_SWITCHOVER_SUCCESS: TACACS+ server switchover 
successful. New server is [dec].[dec].[dec].[dec]. 

Explanation    The TACACS+ server switchover is successful.

Recommended Action    No action is required.

Error Message    %AAA-4-TRANSLATE_AAA_TO_RADIUS_FAILED: Could not translate AAA AVP to 
RADIUS AVP. [chars].Code=[dec], ValueLen=[dec], VendorId=[dec], Buf=[address], 
BufSize=[dec]. 

Explanation    The system could not translate the AAA AVP to the RADIUS AVP.

Recommended Action    No action is required.

Error Message    AAA-0-TX_PKT_TOO_BIG: Radius Request Packet Being Sent via DTL too Big. 
Destination %u.%u.%u.%u. Max Len Supported for DTL %u. Actual Len being sent %u.

Explanation    A RADIUS request packet that was sent via the designated transit list (DTL) is too big.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-4-TXQUEUE_ADD_FAILED: Transmission queue full. Queue name: 
[chars]. Dropping sessionpackets. 

Explanation    When the transmission queue is full, the system drops the session packets.

Recommended Action    No action is required.

Error Message    %AAA-3-UNAME_TOO_LONG: Username too long. Username: [int]. 

Explanation    The username is too long.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-3-UPDATE_GUESTINFO_AT_LOGIN_FAILED: Unable to update guest user 
information at login for [chars]. [chars]. 

Explanation    The system is unable to update guest user information at the time of logging on.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-3-UPDATE_GUESTINFO_AT_LOGOUT_FAILED: Unable to update guest user 
information at logout for [chars]. [chars]. 

Explanation    The system is unable to update guest user information at the time of logging out.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-6-USER_AUTH_PASSED: User authenticated. Username: [chars]. 

Explanation    The user has been authenticated.

Recommended Action    No action is required.

Error Message    %AAA-3-USER_CHAP_CHECK_FAILED: Could not check the CHAP challenge. 
[chars].UsernameLength:[int]. Username: [chars]. 

Explanation    The system could not check the CHAP challenge.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-3-USERDBFILE_CREATE_FAILED: Unable to create user database file. 
[chars]. 

Explanation    The system is unable to create a user database file.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-3-USERDBFILE_LOAD_FAILED: Unable to load user database file. 
[chars]. 

Explanation    The system is unable to load a user database file.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-3-USER_DB_INIT_FAILED: User database not initialized. 

Explanation    The user database is not initialized.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-3-USER_NAME_INVALID: Invalid username provided. [chars]. 

Explanation    The system has detected an invalid username.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-3-USER_PASS_CHECK_FAILED: Could not check password for user. 
[chars].UsernameLength: [dec]. Password Length:[dec]. 

Explanation    The system could not check the password for the user.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-3-VALIDATE_MSCHAP2_CRED_FAILED: Could not validate credentials 
for proxied RADIUS. [chars]. STA : [hex]:[hex]:[hex]:[hex]:[hex]:[hex] (len [int]) 

Explanation    The system could not validate credentials for proxy RADIUS.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %%AAA-3-VALIDATE_GUEST_SESSION_FAILED:

Explanation    This error message is logged in the message log file. The reason for this error message could be any of the following:

User account entry not present

User account not configured as guest

User information not found

Maximum guest user retries are exceeded

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

ACL Messages

This section contains access control list (ACL) messages.

Error Message    %ACL-3-ACE_GET_FAILED: Failed to get ACE from ACL. [chars] 

Explanation    The system is unable to get an access control entry from an access control list.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %ACL-3-CONFIG_STORE_FAILED: Failed to store Acl Config to Flash 
[chars]. 

Explanation    The system failed to write the ACL configuration file onto the flash.

Recommended Action    Try again. If it fails, reset the controller.

Error Message    %ACL-3-DB_LOCK_FAILED: Couldn't get exclusive access on the Acl 
database. [chars]. 

Explanation    All ACLs and their rules are placed in the ACL database. To change the precedence or a rule in the ACL, the table needs to be locked by obtaining a semaphore. This process is failing.

Recommended Action    Try again. If it fails, reset the controller.

Error Message    %ACL-3-DB_UNLOCK_FAILED: Couldn't release exclusive access on the Acl 
database. [chars]. 

Explanation    Releasing the ACL Table semaphore to relinquish the exclusive access has failed.

Recommended Action    Reset the controller.

Error Message    %ACL-3-ENTRY_CREATE_FAILED: Couldn't create ACL [chars]. [chars]. 

Explanation    The system could not create an ACL.

Recommended Action    Try another ACL name or delete the old ACL to create a new ACL.

Error Message    %ACL-3-ENTRY_DELETE_FAILED: Failed to delete ACL Entry [chars]. 
[chars]. 

Explanation    The system has failed to delete the ACL entry.

Recommended Action    Free the ACL from the CPU interface, other interface, or WLAN.

Error Message    %ACL-3-ENTRY_DONOT_EXIST: Unable to find an ACL by name "[chars]". 

Explanation    The system is unable to get an access control list by name.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %ACL-3-GET_FREE_ACL: Couldn't get an unused ACL. [chars]. 

Explanation    The system could not get an unused ACL.

Recommended Action    Delete the old ACL to create a new ACL.

Error Message    %ACL-3-GET_NAME_BY_ID_FAILED: Couldnt get ACL name by ID. [chars]. 

Explanation    The system could not get an ACL name by the ID.

Recommended Action    Provide the correct ACL ID.

Error Message    %ACL-3-IMPRULE_DEL_AVOIDED: Deleting the implicit deny rule [dec] of 
ACL [chars] is not allowed. 

Explanation    Every ACL has an implicit deny-all rule that is always the last rule in the ACL (an ACL allows 64 rules). This rule cannot be deleted.

Recommended Action    No action is required.

Error Message    %ACL-3-INFO_PUSH_FAILED: Failed to push CPU Acl info the NPU 

Explanation    The system has failed to push CPU ACL information to the NPU.

Recommended Action    Try again after some time. If it still fails, reset the controller.

Error Message    %ACL-3-INIT_FAILED: Failure in creating Acl Database. [chars]. 

Explanation    The system has failed to create the semaphore to protect the ACL database.

Recommended Action    Reset the controller.

Error Message    %ACL-3-IPADD_TYPE_INCORRECT: Incorrect IP address type parameter of 
rule [dec] of ACL [chars] 

Explanation    The IP addresses can only be source or destination addresses.

Recommended Action    Try again. If it fails again, reset the controller.

Error Message    %ACL-3-LOAD_CONF_FAILED: Acl config is corrupted. Resetting Acl config 
to default. 

Explanation    The ACL configuration file is corrupted.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %ACL-3-RULE_ACTION_INVALID: Incorrect action [dec] to set for the rule 
[dec] of the ACL [chars]. 

Explanation    The action parameter of the rule of an ACL takes on the values of PERMIT or DENY. An error is displayed if the action is neither of the two values.

Recommended Action    Set the action with either PERMIT or DENY.

Error Message    %ACL-3-RULE_CREATE_FAILED: Can not Add Rule [dec] to ACL [chars]. 
[chars]. 

Explanation    The system cannot add the rule to the ACL.

Recommended Action    The maximum rule limit is achieved. Delete the old rule and create a new rule.

Error Message    %ACL-3-RULE_DONOT_EXIST: Unable to [chars] the rule no.[dec] in ACL 
[chars]. No such rule exist 

Explanation    The system is unable to carry out the operation mentioned on the particular rule in the ACL because the rule does not exist.

Recommended Action    Check whether the ACL name and the rule index are configured correctly.

Error Message    %ACL-3-RULE_PUSH_FAILED: Pushing rule [dec] of Acl [chars] to the 
Network Processor Failed. 

Explanation    ACLs are applied in the Network Processor. They have to be pushed into the NPU. Pushing the rule of the ACL has failed.

Recommended Action    Try again. If it fails, reset the controller.

Error Message    %ACL-3-SET_PORT_RANGE_FAILED: Set Port Range failed for rule [dec] of 
ACL [chars]. [chars]. 

Explanation    The Set Port Range failed for the type parameter for the ACL.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %ACL-3-SET_RULE_DIR_FAILED: Incorrect direction parameter for the rule 
[dec] of the ACL [chars] 

Explanation    The direction parameter of the rule of an ACL takes on the values IN, OUT, and ANY. This error is displayed if the direction is none of the three.

Recommended Action    Set the direction to a valid value.