Cisco Wireless LAN Controller System Message Guide, Release 7.3
RF RFID RRM and SIM System Messages
Downloads: This chapterpdf (PDF - 386.0KB) The complete bookPDF (PDF - 5.34MB) | Feedback

RF RFID RRM and SIM System Messages

Table Of Contents

RF RFID RRM and SIM System Messages

RF Messages

RFID Messages

RMGR Messages

RRM Messages

SIM Messages


RF RFID RRM and SIM System Messages


This chapter contains the following topics:

RF Messages

RFID Messages

RMGR Messages

RRM Messages

SIM Messages

RF Messages

This section contains radio frequency identification (RFID) messages.

Error Message    %RF-3-NOTIF_TID: Notification timer extended for the wrong client, 
cur-client=[dec], req-client=[dec] 

Explanation    The current RF client has attempted to extend the RF notification timer using a client ID other than its own. This is an internal software error. The message text on the console or in the system log contains the error details, such as the current client ID number and the requested client ID number.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %RF-3-NOTIF_TMO: Notification timer Expired for RF Client: 
[chars]([dec]) 

Explanation    The client has indicated it has work to do to RF by returning RF_OK as part of the progression, but it did not complete the work corresponding to the RF within the notification timer.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %RF-5-RF_TERMINAL_STATE: Terminal state reached for ([chars]) 

Explanation    RF has reached a terminal state for the operating mode.

Recommended Action    This is a notification message only. No action is required.

RFID Messages

This section contains radio frequency identification (RFID) messages.

Error Message    %RFID-3-BAD_RSSI_EXPIRY: Illegal rfid expiry value [int]-- defaulting. 

Explanation    Illegal RFID expiry value.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %RFID-3-BAD_RSSI_HALFLIFE: Illegal rfid rssi half life value [int]-- 
defaulting. 

Explanation    Illegal RFID RSSI half life value.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %RFID-3-BAD_TIMEOUT: Illegal rfid timeout value [int]-- defaulting. 

Explanation    Illegal RFID timeout value.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %RFID-3-BLUESOFT_FAIL: Unable to register for bluesoft tag data - error 
[dec]  

Explanation    The system is unable to register for the bluesoft tag data.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %RFID-3-CISCO_FAIL: Unable to register for Cisco tag data - error [dec]  

Explanation    The system is unable to register for the Cisco tag data.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %RFID-3-CONFIG_WRITE_FAIL: Unable to write rfid configuration file. 

Explanation    The system is unable to write the RFID configuration file.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %RFID-3-CREATE_DB_FAIL: Unable to create rfid database  

Explanation    The system is unable to create the RFID database.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %RFID-3-CREATE_Q_FAIL: Unable to create rfid interface  

Explanation    The system is unable to create the RFID internal queue interface.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %RFID-3-DEL_FAIL: Error! Can not delete entry from rfid Table  

Explanation    The system cannot delete an entry from the RFID table.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %RFID-3-DUP_ENTRY: Duplicate entry found on rfid tree. 

Explanation    A duplicate entry has been found on the RFID tree.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %RFID-3-NO_CFG_FILE: Error retrieving file [chars]. 

Explanation    An error has occurred when retrieving the file.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %RFID-3-NO_LOAD_CFG: Unable to load rfid configuration  

Explanation    The system is unable to load the RFID configuration.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %RFID-3-NOTIFICATION_TIMER_NOT_CREATED: [chars] Could not create 
Rfid-Locp Notification timer...  

Explanation    The system could not create the RFID-LOCP Notification timer.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %RFID-3-TCB_FAIL: rfid rx task did not receive a task control block 
--exiting 

Explanation    The RFID rx task did not receive a task control block. The system is exiting.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %RFID-3-TIMER_FAIL: unable to create rfid task timer  

Explanation    The system is unable to create the RFID task timer.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

RMGR Messages

This section contains the RMGR messages.

Error Message    %RMGR-0-CRITICAL_OP_FAILED: [chars] critical operation failed. System 
will be rebooted 

Explanation    An internal system error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %RMGR-0-ERROR_TASK_EXITED: [chars] task did not receive a task control 
block --exiting 

Explanation    An internal system error has occurred.

Recommended Action    The RMGR services failed to start correctly. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %RMGR-0-ERROR_TEST: [chars] $$$$$$$$$ See if we can see this--exiting 

Explanation    An internal system error has occurred.

Recommended Action    This is a UT test. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %RMGR-0-RSRC_CREATION_FAILED: [chars] critical resource could not be 
created. System will be rebooted 

Explanation    An internal system error has occurred.

Recommended Action    The RMGR critical resource creation failed. If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %RMGR-3-INVALID_PING_RESPONSE: Ping response from 
[int].[int].[int].[int] is invalid. [chars]. 

Explanation    The ping response is invalid.

Recommended Action    This is a debug message only. No action is required.

Error Message    %RMGR-3-PING_OPER_FAILED: Unable to start ICMP ping to host [chars]. 
[chars] 

Explanation    The system is unable to start an ICMP ping to the host.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %RMGR-3-RED_API_RET_ERROR: The API [chars] returns error in [chars] 

Explanation    The API returns the specified error.

Recommended Action    This is a debug message only. No action is required.

Error Message    %RMGR-3-RED_BAD_FUNC_ARGS: [chars]: The function argument(s) is bad 

Explanation    The function argument is bad.

Recommended Action    This is a debug message only. No action is required.

Error Message    %RMGR-3-RED_BAD_PARAMS: [chars]: The parameter(s) is bad or not 
initialized yet 

Explanation    The parameter is bad or is not initialized yet.

Recommended Action    This is a debug message only. No action is required.

Error Message    %RMGR-3-RED_FSM_UNUSUAL_CONDITION: [chars]: [chars] 

Explanation    The FSM has an important unusual condition (may not be an error).

Recommended Action    This is a debug message only. No action is required.

Error Message    %RMGR-3-RED_HEALTH_RPT: [chars]: The bitmap [hex] reported from 
[chars] 

Explanation    This is a health state report.

Recommended Action    This is a debug message only. No action is required.

Error Message    %RMGR-3-RED_HEARTBEAT_TMOUT: [chars]: Recved GW ping count [dec] 
phyMgr ping count [dec]. 

Explanation    The redundancy heartbeat is a timeout.

Recommended Action    This is a debug message only. No action is required.

Error Message    %RMGR-3-RED_INCONSISTENT_VALUES: [chars]: The value [hex] and [hex] 
are not consistent 

Explanation    The values are not consistent.

Recommended Action    This is a debug message only. No action is required.

Error Message    %RMGR-3-RED_ROLE_NOTIF_TMOUT: [chars]: [chars] 

Explanation    The role notification is timing out without getting an ACK.

Recommended Action    This is a debug message only. No action is required.

Error Message    %RMGR-3-RED_SM_EXECUTION_ERROR: The state machine state [dec] event 
[dec] 

Explanation    This is a state machine error execution.

Recommended Action    This is a debug message only. No action is required.

Error Message    %RMGR-3-RED_SWITCH_CASE_NOT_HANDLED: [chars]: The switch case [hex] 
not handled 

Explanation    The switch case is not handled.

Recommended Action    This is a debug message only. No action is required.

Error Message    %RMGR-3-SOCK_OPER_FAILED: The [chars] operation has failed on the 
socket descriptor [chars]. Errorcode:[dec] 

Explanation    An operation has failed on a socket descriptor.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %RMGR-6-RED_MOD_NAME: The configured redundancy mode is [chars] 

Explanation    The configured redundancy mode can be read OK.

Recommended Action    No action is required.

Error Message    %RMGR-6-RED_SM_EXECUTION: The state machine state [chars] event 
[chars] 

Explanation    This is a state machine normal execution.

Recommended Action    No action is required.

Error Message    %RMGR-0-CRITICAL_OP_FAILED: %s critical operation failed. System will 
be rebooted

Explanation    The system encountered a critical error due to which the system will be rebooted.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

RRM Messages

This section contains Radio Resource Management (RRM) messages.

Error Message    %RRM-0-FAILEDTIMERCREATE: RRM failed to create timer 

Explanation    The system failed to create a timer.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %RRM-3-AP_DB_ERR1: Unable to find AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] entry in the database, could not process 
[chars]  

Explanation    The operation being performed for the AP failed because the internal entry for the AP was not found. It is possible that the AP has been removed from the controller.

Recommended Action    Use the show ap summary command to determine if the AP is still joined to the controller. If it is not, the message may be ignored. If it is still joined, restart the AP to ensure that it has the latest configuration and contact technical assistance if the problem recurs.

Error Message    %RRM-3-AP_DB_ERR2: Invalid slot number [dec] for  AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] could not process [chars]  

Explanation    The AP has included the wrong slot number.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %RRM-3-FAILEDCOVERAGEPROFILE: [chars]: Coverage profile violation on 
[chars] AP[hex]:[hex]:[hex]:[hex]:[hex]:[hex]::[dec] 

Explanation    A coverage profile violation has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %RRM-3-FAILEDINTPROFILE: [chars]: Interference profile violation on 
[chars] AP[hex]:[hex]:[hex]:[hex]:[hex]:[hex]::[dec] 

Explanation    An interference profile violation has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %RRM-3-FAILEDLOADPROFILE: [chars]: Load profile violation on [chars] 
AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]::[dec] 

Explanation    A load profile violation has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %RRM-3-FAILEDNOISEPROFILE: [chars]: Noise profile violation on [chars] 
AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]::[dec] 

Explanation    A noise profile violation has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %RRM-3-FAILEDRMCLIDB_ADD: Adding to CCX RM Client Database failed 
for[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Adding to the CCX RM client database has failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %RRM-3-INVALIDRFDOMAINNAME: [chars]: Could not read valid RF domain 
name 

Explanation    The system has detected an invalid RF domain name.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %RRM-3-MSGTAG021: [chars]: Unable to queue enchanced coverage data 
from AP [chars] on [chars] 

Explanation    [chars]: The system is unable to queue enhanced coverage data from the AP [chars] on [chars].

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %RRM-3-REACHEDMAXCLIENTS: Reached max Rm clients. 
dropping[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    The system has reached the maximum number of RM clients.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %RRM-3-RRM_LOGMSG: RRM LOG: [chars] 

Explanation    RRM LOG.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %RRM-6-GETRFDOMAINNAME: [chars]: Read RF domain name as [chars] 

Explanation    The system is reading the RF domain name.

Recommended Action    This is a debug message only. No action is required.

Error Message    %RRM-6-PASSEDCOVERAGEPROFILE: [chars]: Coverage profile recovery on 
[chars] AP[hex]:[hex]:[hex]:[hex]:[hex]:[hex]::[dec] 

Explanation    A coverage profile is in recovery.

Recommended Action    This is a debug message only. No action is required.

Error Message    %RRM-6-PASSEDINTPROFILE: [chars]: Interference profile recovery on 
[chars] AP[hex]:[hex]:[hex]:[hex]:[hex]:[hex]::[dec] 

Explanation    An interference profile is in recovery.

Recommended Action    This is a debug message only. No action is required.

Error Message    %RRM-6-PASSEDLOADPROFILE: [chars]: Load profile recovery on [chars] AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex]::[dec] 

Explanation    A load profile is in recovery.

Recommended Action    This is a debug message only. No action is required.

Error Message    %RRM-6-PASSEDNOISEPROFILE: [chars]: Noise profile recovery on [chars] 
AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]::[dec] 

Explanation    A noise profile is in recovery.

Recommended Action    This is a debug message only. No action is required.

Error Message    %RRM-6-SETCHANNEL: set channel on cell 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex]::[dec] to [dec] to reduce co-channel 
interference from [dec] to [dec] 

Explanation    The system has set the channel to reduce cochannel interference.

Recommended Action    This is a debug message only. No action is required.

Error Message    %RRM-6-SETRFDOMAINNAME: [chars]: Change RF domain name to [chars] 

Explanation    The system has set the RF domain name.

Recommended Action    This is a debug message only. No action is required.

Error Message    %RRM-6-SETTXPOWER: [chars]: Set transmit power on [chars] AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex]::[dec] to [int] 

Explanation    The system has set the transmit power.

Recommended Action    This is a debug message only. No action is required.

Error Message    %RRM-6-UPDATECHANNEL: [chars]: Set channel on [chars] AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex]::[dec] to [dec] by configuration change 

Explanation    A channel configuration change has occurred.

Recommended Action    This is a debug message only. No action is required.

Error Message    %RRM-6-UPDATETXPOWER: [chars]: Set transmit power on [chars] AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex]::[dec] to [int] 

Explanation    A transmit power configuration change has occurred.

Recommended Action    This is a debug message only. No action is required.

SIM Messages

This section contains subscriber identity module (SIM) messages.

Error Message    %SIM-7-ADDR_CHANGE_DTL: Address changed to dtl successfully. 
[int].[int].[int].[int] ==> [int].[int].[int].[int] (rc [dec]) 

Explanation    The address has changed to DTL successfully.

Recommended Action    No action is required.

Error Message    %SIM-3-ADDR_INFO_FAIL: Unable to retrieve client Ip info. Ip Addr: 
[int].[int].[int].[int] 

Explanation    The system is unable to retrieve the client IP information.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-4-ADD_VLAN_NPU_FAIL: Failed to add/remove/update vlan information 
into NPU.vlan [int], intf [int] 

Explanation    The system has failed to add/remove/update VLAN information into the NPU.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-APMGR_CONF_FAIL: Failed to configure AP-Manager. Cannot 
configure AP-Manager When LinkAggregation is enabled  

Explanation    The system has failed to configure the AP Manager. It cannot configure the AP Manager when Link Aggregation is enabled.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-APPLY_CONFIG_FAIL: Unable to apply SIM Configuration data 

Explanation    The system is unable to apply the SIM configuration data.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-ARP_SND_FAIL: Unable to send ARP Request. Local MAC: 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex].Ip Addr: [int].[int].[int].[int]Interface # 
[dec]. Vlan Id: [dec] 

Explanation    The system is unable to send an ARP request.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-CREATE_AP_INTERFACE_FAIL: Unable to create AP manager interface 

Explanation    The system is unable to create an AP manager interface.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-CREATE_INTF_FAIL: Unable to create the [chars] interface 

Explanation    The system is unable to create an interface.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-0-CREATE_TASK_FAIL: Failed to Create Transfer Task. The cli, web 
or snmp may not be initialized 

Explanation    The system has failed to create a transfer task. The CLI, web, or SNMP may not be initialized.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-CREATE_VLAN_FAIL: Unable to create VLAN Interface [chars] 

Explanation    The system is unable to create a VLAN interface.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    SIM-0-DEFAULT_BAUD_RATE: Unable to read baudrate from configuration 
file..Setting to default:9600 baud.

Explanation    The system is unable to read the baud rate from the configuration file. The system is resetting to the default of 9600 baud.

Recommended Action    No action is required.

Error Message    %SIM-3-DEL_INTF_APGROUPMAP_FAIL: AP Group vlan is mapped to this 
Interface.  

Explanation    An AP group VLAN is mapped to this interface.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-DEL_INTF_FAIL: Unable to delete interface [chars] form AVL 
Tree. Internal System Error 

Explanation    The system is unable to delete an interface from the AVL tree.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-DEL_INTF_WLANMAP_FAIL: A Wireless LAN is assigned to this 
Interface.  

Explanation    A wireless LAN is assigned to this interface.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-DHCP_CONF_FAIL: Unable to set service port protocol.DHCP server 
failed to be configured 

Explanation    The system is unable to set the service port protocol. The DHCP server has failed to be configured.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-DS_CONF_FAIL: Failed to configure the Distribution system 
Interface.Old Port: [dec]. New Port: [dec] 

Explanation    The system has failed to configure the distribution system interface.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-DS_DEL_FAIL: Failed to delete the distribution system interface 
[chars]. Port # [dec] 

Explanation    The system has failed to delete a distribution system interface.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-ENTRY_CREATE_FAIL: Failed to create a Qos profile. Profile 
Name: [chars] 

Explanation    The system has failed to create a QoS profile.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-FILE_OPEN_FAIL: Unable to open file <[chars]>: [dec]:[chars]. 

Explanation    The system is unable to open a file.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-FILE_READ_FAIL: Failed to read config file [chars]. 

Explanation    The system has failed to read the configuration file.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-FILE_WRITE_FAIL: Failed to Write to config file [chars]. 

Explanation    The system has failed to write to the configuration file.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-FLASH_READ_FAIL: Error loading '[chars]' file from flash 

Explanation    An error occurred when loading the file from the flash.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-7-GUEST_VLAN_ENABLE_FAIL: Guest VLAN enable failed since either 
IP or DHCP configuration could not be cleared for interface [chars]. 

Explanation    The enabling of the guest VLAN functionality failed because either the IP or the DHCP configuration could not be cleared for the interface.

Recommended Action    No action is required.

Error Message    %SIM-3-INTF_DTL_FAIL: Failed to set the Interface in the device 
transformation layer.Interface Name: [chars]Failed to resolve Gateway MAC 

Explanation    The system has failed to set the interface in the device transformation layer. It failed to resolve the Gateway MAC.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-6-INTF_FIND_FAIL: Could not find interface [chars]. 

Explanation    The system could not find an interface.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-INTFGET_GIG_ETH_FAIL: Failed to get the Interface number of the 
Gigabit Ethernet Port 

Explanation    The system has failed to get the interface number of the Gigabit Ethernet port.

Recommended Action    No action is required.

Error Message    %SIM-6-INTF_IN_USE: WLANs enabled for the interface. Disable all WLANs 
to configure port. Interface Name:[chars] 

Explanation    WLANs have been enabled for the interface.

Recommended Action    Disable all WLANs to configure port.

Error Message    %SIM-3-INTF_PORTSET_FAIL: Failed to set the port number to [dec] for 
the interface name '[chars]' 

Explanation    The system has failed to set the port number for the interface.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-INVALID_BAUD_RATE: Invalid baudrate [dec].Setting to 
default:9600 baud. 

Explanation    The system has detected an invalid baud rate. Possible values are 1200, 2400, 4800, 9600, 19200, 38400, 57600, and 115200. The system is setting to the default value of 9600 baud.

Recommended Action    No action is required.

Error Message    %SIM-3-INVALID_INTF: Cannot set the specified interface number 

Explanation    The system cannot set the specified interface number.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-INVALID_PORT: Using invalid port number. Port out of range. Port 
# [int] 

Explanation    The system is using an invalid port number. The port is out of range.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-INVALID_PORT_NUM: Invalid Port # [dec] 

Explanation    The system has detected an invalid port number.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-INVALID_VLANID: Using invalid VLAN ID.Vlan Id out of range. Vlan 
# [int] 

Explanation    The system is using an invalid VLAN ID. The VLAN ID is out of range.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-6-LAG_ALREADY_CONF: Link Aggregation is already set to the same 
Configuration. 

Explanation    LAG is already set to the same configuration.

Recommended Action    No action is required.

Error Message    %SIM-3-LAG_DSBL_PORT_ENBL: LAG disabled but Primary Port enabled 

Explanation    LAG has been disabled but the primary port has been enabled.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-LAG_ENBL_PORT_DSBL: LAG enabled but Primary Port disabled 

Explanation    LAG has been enabled but the primary port has been disabled.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-LAG_INIT_FAIL: Failed to initialize link aggregation. Error 
Code:[int] 

Explanation    The system has failed to initialize link aggregation.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-7-LAG_INTF_CREATED: LAG Interface (port [int]) created... 

Explanation    A LAG interface has been created.

Recommended Action    No action is required.

Error Message    %SIM-6-LAG_INTF_DEL: Link Aggregation Enabled.Dynamic Interface 
'[chars]' deleted 

Explanation    LAG has been enabled. All dynamic interfaces have been deleted.

Recommended Action    No action is required.

Error Message    %SIM-3-LAG_INTF_DEL_FAIL: Failed to delete interface '[chars]' 

Explanation    The system has failed to delete a dynamic interface while enabling LAG.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-LAG_INTF_TO_PORT_MAP: Failed to map LAG interfaces to LAG 
ports. Error Code [int] 

Explanation    The system has failed to map LAG interfaces to LAG ports. LAG has malfunctioned.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-4-LAG_IN_TRANSITION: LAG in transition. switch reboot DUE..!!!  

Explanation    LAG is in transition. A switch reboot is due.

Recommended Action    No action is required.

Error Message    %SIM-3-LAG_PORTADD_FAIL: Failed to add port for LAG. Error code [int]. 
Port # [int] 

Explanation    The system has failed to add a physical port to LAG.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-LAG_PORT_CHANGE_FAIL: Failed to change the Link Aggregation 
port status. Port # [dec] 

Explanation    The system has failed to change the LAG port status.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-6-LAG_WLAN_DISABLED: Link Aggregation Enabled. WLAN [int] 
disabled and set to interface [chars] 

Explanation    LAG has been enabled. The WLAN has been disabled and remapped.

Recommended Action    No action is required.

Error Message    %SIM-3-LVL7_TO_BAUD_FAIL: Invalid baud value [dec], returning baudrate 
of 9600. 

Explanation    An invalid baud value has returned a baud rate of 9600.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-MACADDR_GET_FAIL: Interface [dec] source MAC address is not 
found. 

Explanation    An interface source MAC address has not been found.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-MACADDR_READ_FAIL: Failed to retrieve MAC Address from registry 

Explanation    The system has failed to retrieve a MAC address.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-MAXLEN_DESC_FAIL: Failed to read/write the profile description. 
Profile Too Big. Profile Name:[chars] 

Explanation    The system has failed to read/write the profile description. The profile is too big.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-MEM_ALLOC_FAIL: Interface File migration failed - OUT OF 
MEMORY!!!. 

Explanation    An interface file migration has failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-MIG_OLD_CFG: Interface File migration failed - OUT OF DATED CFG 
!!!. 

Explanation    An interface file migration has failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-MLTP_UNTG_INTF: Multiple untagged interfaces on same port not 
allowed 

Explanation    Multiple untagged interfaces on the same port are not allowed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-NPU_IPADD_FAIL: Failed to add the Ip Address of a client in the 
NPU. IP: [int].[int].[int].[int].MAC: [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    The system has failed to add the IP address of a client in the NPU.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-4-NPU_IPDEL_FAIL: Failed to delete the Ip Address of a client from 
the NPU. IP: [int].[int].[int].[int]MAC: [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    The system has failed to delete the IP address of a client from the NPU.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-7-PHASE2_LAG_INIT: Phase2 of LAG Initialization... 

Explanation    Phase 2 of LAG initialization has begun.

Recommended Action    No action is required.

Error Message    %SIM-7-PHASE2_LAG_INIT_DONE: Phase2 of LAG Initialization...done. 

Explanation    Phase 2 of LAG initialization is completed.

Recommended Action    No action is required.

Error Message    %SIM-7-PORT_CHANGED: interface '[chars]' port changed to 1 

Explanation    The interface port has changed to 1.

Recommended Action    No action is required.

Error Message    %SIM-7-PORT_DEL_START:  Starting Port delete from NPU. vlan=[dec], 
intf ID=[dec] 

Explanation    The system is starting a port delete from the NPU.

Recommended Action    No action is required.

Error Message    %SIM-3-PORT_DOWN: Physical port [dec] is down!. 

Explanation    A physical port is down.

Recommended Action    No action is required.

Error Message    %SIM-6-PORT_FAIL: Port [[dec]] Out of Range for LAG. Valid Range is 
[dec] - [dec]  

Explanation    The requested port is out of range for LAG.

Recommended Action    No action is required.

Error Message    %SIM-3-PORT_GETSTATE_FAIL: Unable to get link state for port [dec] of 
interface[chars]. 

Explanation    The system is unable to get the link state for a port.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-7-PORT_NPU_ADD_START: Starting Port Add To NPU. vlan=[dec], 
port=[dec], portBitMap=[hex] 

Explanation    The system is starting a port add to NPU.

Recommended Action    No action is required.

Error Message    %SIM-3-PORT_UP: Physical port [dec] is up!. 

Explanation    The physical port is up.

Recommended Action    No action is required.

Error Message    %SIM-7-PORT_UPDATE_START: Vlan Port Update Start. oldPort:[dec] 
newPort:[dec] oldVlan:[dec] newVlan:[dec] vlanName:[chars] 

Explanation    A VLAN port update has started.

Recommended Action    No action is required.

Error Message    %SIM-7-PORT_ZERO: Using invalid port number. Port out of range. Port 
# [int] 

Explanation    The system is using an invalid port number. The port is out of range.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-QOS_ACIMAP_FAIL: Unable to set [chars] Adjacent Channel 
Interference (ACI) map 

Explanation    The system is unable to set the profile Adjacent Channel Interference (ACI) map.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-QOS_ACM_DOT1A_FAIL: Unable to set [chars] Admission Control 
(ACM) 

Explanation    The system is unable to set Admission Control (ACM).

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-QOS_ACM_DOT1BG_FAIL: Unable to set [chars] Admission Control 
(ACM) 

Explanation    The system is unable to set Admission Control (ACM).

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-QOS_AIFS_FAIL: Unable to set [chars] Arbitration Interframe 
Space (AIFS) 

Explanation    The system is unable to set the Arbitration Interframe Space (AIFS).

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-QOS_AVGBW_FAIL: Unable to set [chars] Profile Real-Time and 
Data Bandwidth Contract (Average) 

Explanation    The system is unable to set the profile real-time and data bandwidth contract (average).

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-QOS_BURSTBW_FAIL: Unable to set [chars] Real-Time or Data 
Bandwidth Contract (Burst) 

Explanation    The system is unable to set the real-time or data bandwidth contract (burst).

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-QOS_CREATE_PROFILE: Unable to create [chars] QOS Profile 

Explanation    The system is unable to create a QoS profile.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-QOS_CWMAX_FAIL: Unable to set [chars] Maximum Contention Window 
(CwMax) 

Explanation    The system is unable to set the Maximum Contention Window (CwMax).

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-QOS_CWMIN_FAIL: Unable to set [chars] Minimum Contention Window 
(CwMin) 

Explanation    The system is unable to set the Minimum Contention Window (CwMin).

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-QOS_DOT1P_FAIL: Unable to set [chars] 802.1P Tag 

Explanation    The system is unable to set a 802.1P tag.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-QOS_DSCP_FAIL: Unable to set [chars] Differentiated Service 
Code Point (DSCP) 

Explanation    The system is unable to set a Differentiated Service Code Point (DSCP).

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-QOS_INIT_FAIL: Error! Couldn't load qos configuration at 
initialization 

Explanation    The system could not load the QoS configuration at initialization.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-6-QOS_NAME_INVALID: Qos Profile Name Invalid. Profile Name Too 
Long or No Profile Name Given 

Explanation    The QoS profile name is invalid. The profile name is too long or no profile name is given.

Recommended Action    No action is required.

Error Message    %SIM-3-QOS_PROFILE_DESC_SET: Unable to set [chars] QOS Profile 
Description 

Explanation    The system is unable to set a QoS profile description.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-QOS_QUEUE_DEPTH_FAIL: Unable to set [chars] Queue Depth 

Explanation    The system is unable to set the queue depth.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-QOS_RF_USAGE_FAIL: Unable to set [chars] RF Usage 

Explanation    The system is unable to set RF usage.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-6-QOS_SAME_PROFILE: QOS Profile Name [chars] already set. Cannot 
apply the same profile. 

Explanation    A QoS profile has already been set. The system cannot apply the same profile.

Recommended Action    No action is required.

Error Message    %SIM-3-QOS_TXOP_FAIL: Unable to set [chars] Transmission Opportunity 
(Txop) 

Explanation    The system is unable to set the Transmission Opportunity (Txop).

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-QOS_WIRED_PROTOCOL_FAIL: Unable to set [chars] Wired Protocol 

Explanation    The system is unable to set the Wired protocol.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-QVLAN_CREATE_FAILED: Attempt to create a new quarantine VLAN 
[chars] failed.  

Explanation    When a quarantine VLAN is assigned to an interface, the system internally creates an interface .sys.quarantine-<port.

Recommended Action    No action is required.

Error Message    %SIM-3-QVLAN_DEL_FAILED: Attempt to delete existing quarantine VLAN 
[chars] failed.  

Explanation    When the quarantine VLAN is changed on an interface, the system attempts to delete the old quarantine VLAN. This delete operation has failed.

Recommended Action    No action is required.

Error Message    %SIM-3-QVLAN_EXISTS: Attempt to assigned quarantine VLAN [int] to 
interface [chars] failed. VLAN [int] already exists as interface [chars].  

Explanation    The quarantine VLAN must not be assigned to any other port/VLAN combination.

Recommended Action    No action is required.

Error Message    %SIM-3-QVLAN_FIND2_FAILED: Unable to find quarantine vlan [int] in the 
interface db.  

Explanation    When a quarantine VLAN is assigned to an interface, the system internally creates an interface .sys.quarantine-<port.

Recommended Action    No action is required.

Error Message    %SIM-3-QVLAN_FIND_FAILED: Unable to find quarantine interface [chars] 
in the interface db.  

Explanation    When a quarantine VLAN is assigned to an interface, the system internally creates an interface.

Recommended Action    No action is required.

Error Message    %SIM-3-QVLAN_PORT_SET_FAILED: Attempt to set port number [int] for the 
quarantine VLAN [chars] failed.  

Explanation    When a quarantine VLAN is assigned to an interface, the system internally creates an interface .sys.quarantine-<port.

Recommended Action    No action is required.

Error Message    %SIM-3-QVLAN_RECURSIVE: Quarantine VLAN cannot be configured on 
quarantine interface [chars].  

Explanation    This interface was automatically created by the system. Only a limited configuration is supported on this interface.

Recommended Action    No action is required.

Error Message    %SIM-3-QVLAN_STATUS_DOWN: Quarantine VLAN for interface [chars] cannot 
be set because the interface is not fully configured.  

Explanation    Before the quarantine VLAN is configured on an interface, that interface must have its port and address information fully configured.

Recommended Action    No action is required.

Error Message    %SIM-3-ROUTE_ADD_FAIL: Failed to apply route configuration data;Route 
add failed.IP Address: [int].[int].[int].[int] 

Explanation    The system has failed to apply route configuration data.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-ROUTE_DEL_FAIL: Could not delete the route for the network 
[int].[int].[int].[int] 

Explanation    The system could not delete the route for a network.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-SET_APMGR_ADDR_FAIL: Unable to set AP manager address. 
Subnet:[int].[int].[int].[int] Gateway:[int].[int].[int].[int] 

Explanation    The system is unable to set the AP manager address.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-SET_APMGR_PORT_FAIL: Unable to set AP Manager interface port. 
Port # [dec] 

Explanation    The system is unable to set the AP manager interface port.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-SET_INTF_ADDR_FAIL: Unable to set service port interface 
address. Ip Address: [int].[int].[int].[int].Gateway: [int].[int].[int].[int] 

Explanation    The system is unable to set the service port interface address.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    SIM-0-SET_INTF_AP_MGR_FAIL: Unable to set ap manager flag on the %s 
interface.

Explanation    The system is unable to set the AP manager flag on an interface.

Error Message    %SIM-6-SET_P2P_BLOCK: Peer-to-Peer blocking check in forwarding path 
transitioned from [chars] to [chars]. 

Explanation    A peer to peer blocking check was enabled/disabled.

Recommended Action    No action is required.

Error Message    %SIM-3-SET_VAP_INTF_FAIL: Unable to configure a Virtual Access Point 
Interface. Vap Id: [int] 

Explanation    The system is unable to configure a virtual access point (VAP) interface.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-SET_VLAN_ADDR_FAIL: Unable to set VLAN Interface Address. Ip 
Addr:[int].[int].[int].[int]. Gateway:[int].[int].[int].[int] 

Explanation    The system is unable to set the VLAN interface address.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-7-START_CREATE_INTF: Started create interface. 
interfaceName:[chars], vlanId:[dec] 

Explanation    The system has started to create an interface.

Recommended Action    No action is required.

Error Message    %SIM-7-START_DEL_INTF: Started delete interface. 
InterfaceName:[chars] 

Explanation    The system has started to delete an interface.

Recommended Action    No action is required.

Error Message    %SIM-7-STARTED_PORT_VLAN_SET: Started port and vlan set. interface 
'[chars]' priPort = [dec] backupPort = [dec] 

Explanation    The system has started to set a port and VLAN.

Recommended Action    No action is required.

Error Message    %SIM-7-STARTED_VLAN_SET: Started vlan set. intf name=[chars], 
vlanId:[dec], immediately:[dec] 

Explanation    The system has started to set the VLAN.

Recommended Action    No action is required.

Error Message    %SIM-7-START_INTF_PORT_SET: Starting interface port set. interface 
'[chars]' priPort = [dec] 

Explanation    The system has started to set the interface port.

Recommended Action    No action is required.

Error Message    %SIM-4-STP_DISABLE_FAIL: Failed to disable the STP sub-system for the 
switch. 

Explanation    The system has failed to disable the STP subsystem for the switch.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-STP_PORT_MODE_FAIL: Failed to set the port mode to off for STP. 

Explanation    The system has failed to set the port to off for STP.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-0-TIMER_CREATE_FAIL: Failed to create down timer for port [int] 

Explanation    The system has failed to create a software timer.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-0-TIMER_START_FAIL: Failed to start a software timer. 

Explanation    The system has failed to start a software timer.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-VLAN_ENTRY_FAIL: Failed to create VLAN interface [chars] 

Explanation    The system has failed to create a VLAN interface.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-VLANID_NOT_CONF: A valid VLAN ID has to be configured first 
before the port set. Interface Name: [chars] 

Explanation    A valid VLAN ID has to be configured first before the port can be set.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-VLAN_INIT_FAIL: Error! Couldn't load interface configuration at 
initialization 

Explanation    The system could not load the interface configuration at initialization.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-VLAN_INTFID_FAIL: Failed to assign Interface ID to Vlan - 
interface type: [dec]. 

Explanation    The system has failed to assign an interface ID to a VLAN.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-VLAN_SAME_INTERFACE: Vlan Interface name [chars] already set. 
Cannot create the same interface 

Explanation    A VLAN Interface has already been set. The system cannot create the same interface.

Recommended Action    No action is required.

Error Message    %SIM-3-VLAN_SAME_TAG: Interfaces configured with same Vlan Tag, but on 
different port - Not SupportedPort # [dec], Primary Port # [dec], Vlan Id [dec] 

Explanation    Interfaces are configured with the same VLAN tag, but are on different ports.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-VLAN_UPDATE_FAIL: Failed to update the vlan port settings.Port 
# [int], vlan Id [int] 

Explanation    The system has failed to update the VLAN port settings.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %SIM-3-WLAN_DISABLE_FAIL: Failed to disable WLAN [int] 

Explanation    The system has failed to disable a WLAN.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Recommended Action