Cisco Nexus 6000 Series NX-OS Unicast Routing Command Reference
T Commands
Downloads: This chapterpdf (PDF - 72.0KB) The complete bookPDF (PDF - 7.33MB) | Feedback

Table of Contents

T Commands

test forwarding distribution perf

test forwarding inconsistency

T Commands

This chapter describes the Cisco NX-OS unicast Routing Information Base (RIB) and the Forwarding Information Base (FIB) commands that begin with T.

test forwarding distribution perf

To test the forwarding distribution performance of the Forwarding Information Base (FIB), use the test forwarding distribution perf command.

test forwarding distribution perf

 
Syntax Description

This command has no arguments or keywords.

 
Command Default

None

 
Command Modes

Any command mode

 
Command History

Release
Modification

6.0(2)N1(1)

This command was introduced.

Examples

This example shows how to test the forwarding distribution performance:

switch# test forwarding distribution perf
 

 
Related Commands

Command
Description

show forwarding distribution

Displays information about the FIB.

test forwarding inconsistency

To trigger the Layer 3 inconsistency checker for the Forwarding Information Base (FIB), use the test forwarding inconsistency command.

test forwarding inconsistency [ ip | ipv4 ] [ unicast ] [ vrf vrf-name ] [ module { slot | all }] [ stop ]

 
Syntax Description

ip

(Optional) Specifies the inconsistency check for IPv4 routes.

ipv4

(Optional) Specifies the inconsistency check for IPv4 routes.

unicast

(Optional) Specifies the inconsistency check for unicast routes.

vrf vrf-name

(Optional) Specifies the virtual routing and forwarding (VRF) context name. The name can be any case-sensitive, alphanumeric string up to 32 characters.

module

(Optional) Specifies the inconsistency check for one or more modules.

slot

Module number. The range depends on the platform.

all

(Optional) Specifies the inconsistency check for all modules.

stop

(Optional) Stops the inconsistency check.

 
Command Default

None

 
Command Modes

Any command mode

 
Command History

Release
Modification

6.0(2)N1(1)

This command was introduced.

Examples

This example shows how to trigger the Layer 3 inconsistency checker for all modules:

switch# test forwarding inconsistency module all
 

This example shows how to stop the Layer 3 inconsistency checker for all modules:

switch# test forwarding inconsistency module all stop
 

 
Related Commands

Command
Description

clear forwarding inconsistency

Clears the FIB inconsistencies.

show forwarding inconsistency

Displays information about the FIB inconsistencies.