Cisco Nexus 6000 Series NX-OS Unicast Routing Command Reference
BGP F Commands
Downloads: This chapterpdf (PDF - 57.0KB) The complete bookPDF (PDF - 7.33MB) | Feedback

Table of Contents

F Commands

feature bgp

F Commands

This chapter describes the Cisco NX-OS Border Gateway Protocol (BGP) commands that begin with F.

feature bgp

To enable the Border Gateway Protocol (BGP), use the feature bgp command. To disable BGP, use the no form of this command.

feature bgp

no feature bgp

 
Syntax Description

This command has no arguments or keywords.

 
Command Default

Disabled

 
Command Modes

Global configuration mode

 
Command History

Release
Modified

6.0(2)N1(1)

This command was introduced.

 
Usage Guidelines

You must enable the BGP feature before you can configure BGP.

This command requires the LAN Enterprise Services license.

Examples

This example shows how to enable a BGP configuration:

switch# configure terminal
switch(config)# feature bgp
switch(config)#
 

This example shows how to disable the BGP feature:

switch# configure terminal
switch(config)# no feature bgp
switch(config)#

 
Related Commands

Command
Description

router bgp

Creates a BGP instance.

show bgp

Displays BGP configuration information.

show feature

Displays the status of features on a switch.