Cisco MDS 9000 Family Fabric Manager Configuration Guide
Configuring Call Home
Downloads: This chapterpdf (PDF - 611.0KB) The complete bookPDF (PDF - 48.18MB) | Feedback

Configuring Call Home

Table Of Contents

Configuring Call Home

Call Home Features

About Smart Call Home

Obtaining Smart Call Home

Configuring Call Home

Configuring Contact Information

Destination Profiles

Alert Groups

Customized Alert Group Messages

Customizing Alert Group Messages Using Fabric Manager

Call Home Message Level Feature

Setting the Call Home Message Levels Using Fabric Manager

Syslog-Based Alerts

Configuring Syslog-Based Alerts Using Fabric Manager

RMON-Based Alerts

Configuring RMON Alerts Using Fabric Manager

E-Mail Options

Configuring General E-Mail Options Using Fabric Manager

Configuring HTTPS Support

Periodic Inventory Notification

Enabling Periodic Inventory Notifications Using Fabric Manager

Duplicate Message Throttle

Enabling Message Throttling Using Fabric Manager

Call Home Enable Function

Enabling Call Home Using Fabric Manager

Call Home Configuration Distribution

Enabling Call Home Fabric Distribution Using Fabric Manager

Fabric Lock Override

Database Merge Guidelines

Call Home Communications Test

Testing Call Home Using Fabric Manager

Clearing Call Home Name Server Database

Configuring EMC E-mail Home Delayed Traps

Configuring Delayed Traps Using Cisco Fabric Manager

Enabling Delayed Traps Using Cisco Device Manager

Sample Syslog Alert Notification in Full-txt Format

Sample Syslog Alert Notification in XML Format

Sample RMON Notification in XML Format

Event Triggers

Call Home Message Levels

Message Contents

Default Settings


Configuring Call Home


Call Home provides e-mail-based notification of critical system events. A versatile range of message formats are available for optimal compatibility with pager services, standard e-mail, or XML-based automated parsing applications. Common uses of this feature may include direct paging of a network support engineer, e-mail notification to a Network Operations Center, and utilization of Cisco Smart Call Home services for direct case generation with the Technical Assistance Center.


Note Cisco Autonotify is upgraded to a new capability called Smart Call Home. Smart Call Home has significant functionality improvement over Autonotify and is available across the Cisco product range. For detailed information on Smart Call Home, see the Smart Call Home page at this location: http://www.cisco.com/go/smartcall/


The Call Home feature provides message throttling capabilities. Periodic inventory messages, port syslog messages, and RMON alert messages are added to the list of deliverable Call Home messages. If required you can also use the Cisco Fabric Services application to distribute the Call Home configuration to all other switches in the fabric.

This chapter includes the following sections:

Call Home Features

About Smart Call Home

Obtaining Smart Call Home

Configuring Call Home

Configuring Contact Information

Destination Profiles

Alert Groups

Customized Alert Group Messages

Call Home Message Level Feature

Syslog-Based Alerts

RMON-Based Alerts

E-Mail Options

Configuring HTTPS Support

Periodic Inventory Notification

Duplicate Message Throttle

Call Home Enable Function

Call Home Configuration Distribution

Call Home Communications Test

Clearing Call Home Name Server Database

Configuring EMC E-mail Home Delayed Traps

Event Triggers

Event Triggers

Call Home Message Levels

Message Contents

Call Home Features

The Call Home functionality is available directly through the Cisco MDS 9000 Family. It provides multiple Call Home profiles (also referred to as Call Home destination profiles), each with separate potential destinations. You can define your own destination profiles in addition to predefined profiles.

The Call Home function can even leverage support from Cisco Systems or another support partner. Flexible message delivery and format options make it easy to integrate specific support requirements.

The Call Home feature offers the following advantages:

Fixed set of predefined alerts and trigger events on the switch.

Automatic execution and attachment of relevant command output.

Multiple message format options:

Short Text—Suitable for pagers or printed reports.

Plain Text—Full formatted message information suitable for human reading.

XML—Matching readable format using Extensible Markup Language (XML) and document type definitions (DTDs) named Messaging Markup Language (MML). The MML DTD is published on the Cisco.com website at http://www.cisco.com/. The XML format enables communication with the Cisco Systems Technical Assistance Center.

Multiple concurrent message destinations. You can configure up to 50 e-mail destination addresses for each destination profile.

Multiple message categories including system, environment, switching module hardware, supervisor module, hardware, inventory, syslog, RMON, and test.

About Smart Call Home

Smart Call Home is a component of Cisco SMARTnet Service that offers proactive diagnostics, real-time alerts, and personalized web-based reports on select Cisco devices.

Smart Call Home provides fast resolution of system problems by analyzing Call Home messages sent from your devices and providing a direct notification path to Cisco customer support.

Smart Call Home offers the following features:

Continuous device health monitoring and real-time diagnostics alerts.

Analysis of Call Home messages from your device and where appropriate, automatic service request generation, routed to the appropriate TAC team, including detailed diagnostic information to speed problem resolution.

Secure message transport through a downloadable Transport Gateway (TG) aggregation point. You can use a TG aggregation point in cases requiring support for multiple devices or in cases where security requirements mandate that your devices not be connected directly to the Internet.

Web-based access to Call Home messages and recommendations, inventory and configuration information for all Call Home devices. Provides access to associated Field Notices, Security Advisories and End-of-Life Information.

Table 60-1 lists the benefits of Smart Call Home.

Table 60-1 Benefits of Smart Call Home Compared to Autonotify 

Feature
Smart Call Home
Autonotify

Low touch registration

The registration process is considerably streamlined. Customers no longer need to know their device serial number or contract information. They can register devices without manual intervention from Cisco by sending a message from those devices. The procedures are outlined at www.cisco.com/go/smartcall

Requires the customer to request Cisco to add each specific serial number to the database.

Recommendations

Smart Call Home provides recommendations for known issues including those for which SRs are raised and for which SRs are not appropriate but for which customers might want to still take action on.

Autonotify raises SRs for a set of failure scenarios but no recommendations are provided for these.

Device report

Device report includes full inventory and configuration details. Once available, the information in these reports will be mapped to field notices, PSIRTs, EoX notices, configuration best practices and bugs.

No.

History report

The history report is available to look up any message and its contents, including show commands, message processing, analysis results, recommendations and service request numbers for all messages sent over the past three months.

A basic version is available that does not include contents of message.

Network summary report

A report that provides a summary of the make-up of devices and modules in the customer network (for those devices registered with Smart Call home)

No.

Cisco device support

Device Support will be extended across the Cisco product range. See the supported products table at www.cisco.com/go/smartcall

Will be deprecated in favor of Smart Call Home in October 2008.


Obtaining Smart Call Home

If you have a service contract directly with Cisco Systems, you can receive automatic case generation from the Technical Assistance Center by registering with the Smart Call Home service.

You need the following items to register:

The SMARTnet contract number for your switch.

Your e-mail address

Your Cisco.com ID

For detailed information on Smart Call Home, including quick start configuration and registration steps, see the Smart Call Home page at this location: http://www.cisco.com/go/smartcall/

Configuring Call Home

How you configure the Call Home process depends on how you intend to use the feature. Some points to consider include:

An e-mail server and at least one destination profile (predefined or user-defined) must be configured. The destination profile(s) used depends on whether the receiving entity is a pager, e-mail, or automated service such as Cisco Smart Call Home.

Switches can forward events (SNMP traps/informs) up to 10 destinations.

The contact name (SNMP server contact), phone, and street address information must be configured before Call Home is enabled. This configuration is required to determine the origin of messages received.

The Cisco MDS 9000 switch must have IP connectivity to an e-mail server.

If Cisco Smart Call Home is used, an active service contract must cover the device being configured.

To configure Call Home, follow these steps:


Step 1 Assign contact information.

Step 2 Configure destination profiles.

Step 3 Associate one or more alert groups to each profile as required by your network. Customize the alert groups, if desired.

Step 4 Configure e-mail options.

Step 5 Enable or disable Call Home.

Step 6 Test Call Home messages.


Configuring Contact Information

Each switch must include e-mail, phone, and street address information. You can optionally include the contract ID, customer ID, site ID, and switch priority information.


Note Switch priority is specific to each switch in the fabric. This priority is used by the operations personnel or TAC support personnel to decide which Call Home message they should respond to first. You can prioritize Call Home alerts of the same severity from each switch.


To assign the contact information using Fabric Manager, follow these steps:


Step 1 In the Fabric Manager Physical Attributes pane, expand Switches, expand Events, and select Call Home.

You see the Call Home tabs in the Information pane (see Figure 60-1).

Figure 60-1 Call Home in Fabric Manager

Step 2 In Device Manager, click Admin > Events > Call Home. See Figure 60-2.

Figure 60-2 Call Home in Device Manager

Step 3 Click the General tab, then assign contact information and enable the Call Home feature. Call Home is not enabled by default. You must enter an e-mail address that identifies the source of Call Home notifications.

Step 4 Click the Destination(s) tab to configure the destination e-mail addresses for Call Home notifications. You can identify one or more e-mail addresses that will receive Call Home notifications.


Note Switches can forward events (SNMP traps/informs) up to 10 destinations.


Step 5 Click the e-mail Setup tab to identify the SMTP server. Identify a message server to which your switch has access. This message server will forward the Call Home notifications to the destinations.

Step 6 In Fabric Manager, click the Apply Changes icon. In Device Manager, click Apply.


Destination Profiles

A destination profile contains the required delivery information for an alert notification. Destination profiles are typically configured by the network administrator. At least one destination profile is required. You can configure multiple destination profiles of one or more types.

You can use one of the predefined destination profiles or define a desired profile. If you define a new profile, you must assign a profile name.


Note If you use the Cisco Smart Call Home service, the XML destination profile is required (see http://www.cisco.com/en/US/partner/products/hw/ps4159/ps4358/products_configuration_example09186a0080108e72.shtml).


You can configure the following attributes for a destination profile:

Profile name—A string that uniquely identifies each user-defined destination profile and is limited to 32 alphanumeric characters. The format options for a user-defined destination profile are full-txt, short-txt, or XML (default).

Destination address—The actual address, pertinent to the transport mechanism, to which the alert should be sent.

Message formatting—The message format used for sending the alert (full text, short text, or XML).

To configure predefined destination profile messaging options using Fabric Manager, follow these steps:


Step 1 Expand Switches, expand Events, and select Call Home in the Physical Attributes pane.

Step 2 Click the Profiles tab in the Information pane.

You see the Call Home profiles for multiple switches shown in Figure 60-3.

Figure 60-3 Call Home Profiles for Multiple Switches

Step 3 Set the profile name, message format, message size, and severity level.

Step 4 Click in the Alert Groups column and select or remove an alert group.

Step 5 Click the Apply Changes icon to create this profile on the selected switches.


To configure a new destination-profile (and related parameters) using Fabric Manager, follow these steps:


Step 1 Expand Switches, expand Events, and select Call Home in the Physical Attributes pane.

Step 2 Click the Profiles tab in the Information pane.

You see Call Home profiles for multiple switches.

Figure 60-4 Call Home Profiles for Multiple Switches

Step 3 Click the Create Row icon to add a new profile.

Step 4 Set the profile name, message format, size, and severity level.

Step 5 Click an alert group and select each group from the drop-down list that you want sent in this profile.

Step 6 Click the Apply Changes icon to create this profile on the selected switches.


Alert Groups

An alert group is a predefined subset of Call Home alerts supported in all switches in the Cisco MDS 9000 Family. Different types of Call Home alerts are grouped into different alert groups depending on their type. You can associate one or more alert groups to each profile as required by your network.

The alert group feature allows you to select the set of Call Home alerts to be received by a destination profile (either predefined or user-defined). You can associate multiple alert groups with a destination profile.


Note A Call Home alert is sent to e-mail destinations in a destination profile only if that Call Home alert belongs to one of the alert groups associated with that destination profile.


To associate an alert group with a destination profile using Fabric Manager, follow these steps:


Step 1 Expand Switches, expand Events, and select Call Home in the Physical Attributes pane.

Step 2 Click the Profiles tab in the Information pane.

You see the Call Home profiles for multiple switches shown in Figure 60-5.

Figure 60-5 Call Home Profiles for Multiple Switches

Step 3 Click the Alert Groups column in the row for the profile you want to associate.

You see the alert groups drop-down menu shown in Figure 60-6.

Figure 60-6 Alert Groups Drop-down Menu

Step 4 Click an alert group to select it for association.

Step 5 You see a check next to that alert group. To deselect it and remove the check, click it again.

Step 6 Click the Apply Changes icon.


Customized Alert Group Messages

The predefined Call Home alert groups generate notification messages when certain events occur on the switch. You can customize predefined alert groups to execute additional valid show commands when specific events occur. The output from these additional show commands is included in the notification message along with the output of the predefined show commands.


Note You can assign a maximum of five user-defined show commands to an alert group. Only show commands can be assigned to an alert group.



Note Customized show commands are only supported for full text and XML alert groups. Short text alert groups (short-txt-destination) do not support customized show commands because they only allow 128 bytes of text.


To assign show commands to be executed when an alert is sent, you must associate the commands with the alert group. When an alert is sent, Call Home associates the alert group with an alert type and attaches the output of the show commands to the alert message.


Note Make sure the destination profiles for a non-Cisco-TAC alert group, with a predefined show command, and the Cisco-TAC alert group are not the same.


Customizing Alert Group Messages Using Fabric Manager

To customize Call Home alert group messages using Fabric Manager, follow these steps:


Step 1 Expand Switches, expand Events, and select Call Home in the Physical Attributes pane.

Step 2 Click the User Defined Command tab in the Information pane.

You see the User Defined Command information shown in Figure 60-7.

Figure 60-7 User Defined Command Dialog Box

Step 3 Click the Create Row icon.

Step 4 Check the check boxes in front of the switches from which you want to receive alerts.

Step 5 Select the alert group type from the Alert Group Type drop-down list.

Step 6 Select the ID (1-5) of the CLI command. The ID is used to keep track of the messages.

Step 7 Enter the CLI show command in the CLI Command field.

Step 8 Click Create.

Step 9 Repeat Steps 3 through 7 for each command you want to associate with the profile.

Step 10 Click Close to close the dialog box.


Call Home Message Level Feature

The Call Home message level feature allows you to filter messages based on their level of urgency. Each destination profile (predefined and user-defined) is associated with a Call Home message level threshold. Any message with a value lower than the urgency threshold is not sent. The urgency level ranges from 0 (lowest level of urgency) to 9 (highest level of urgency), and the default is 0 (all messages are sent).


Note Call Home severity levels are not the same as system message logging severity levels.


Setting the Call Home Message Levels Using Fabric Manager

To set the message level for each destination profile for Call Home using Fabric Manager, follow these steps:


Step 1 In Fabric Manager, expand the Switches folder in the Physical Attributes pane, expand Events and then select Call Home.

You see the Call Home information in the Information pane.

In Device Manager, choose Admin > Events > Call Home.

Step 2 Click the Profiles tab in the Information Pane.

You see the Call Home profiles shown in Figure 60-8.

Figure 60-8 Call Home Profiles

Step 3 Set a message level for each switch using the drop-down menu in the MsgLevel column.

Step 4 Click the Apply Changes icon to save your changes.


Syslog-Based Alerts

You can configure the switch to send certain syslog messages as Call Home messages. The syslog-group-port alert group selects syslog messages for the port facility. The Call Home application maps the syslog severity level to the corresponding Call Home severity level (see the "Call Home Message Levels" section). For example, if you select level 5 for the Call Home message level, syslog messages at levels 0, 1, and 2 are included in the Call Home log.

Whenever a syslog message is generated, the Call Home application sends a Call Home message depending on the mapping between the destination profile and the alert group mapping and based on the severity level of the generated syslog message. To receive a syslog-based Call Home alert, you must associate a destination profile with the syslog alert groups (currently there is only one syslog alert group—syslog-group-port) and configure the appropriate message level (see the "Call Home Message Level Feature" section).


Note Call Home does not change the syslog message level in the message text. The syslog message texts in the Call Home log appear as they are described in the Cisco MDS 9000 Family System Messages Guide.


Configuring Syslog-Based Alerts Using Fabric Manager

To configure the syslog-group-port alert group using Fabric Manager, follow these steps:


Step 1 Select a switch in the Fabric pane.

Step 2 Expand Switches, expand Events, and select Call Home in the Physical Attributes pane.

You see the Call Home information in the Information pane.

Step 3 Click the Profiles tab.

You see the Call Home profiles shown in Figure 60-9.

Figure 60-9 Call Home Profiles

Step 4 Click the Create Row icon.

You see the Create Call Home Profile dialog box.

Step 5 Select the switches for which you want to send alerts.

Step 6 Enter the name of the profile in the Name field.

Step 7 Choose the message format, message size, and message severity level.

Step 8 Check the syslogGroupPort check box in the AlertGroups section.

Step 9 Click Create to create the profile for the syslog-based alerts.

Step 10 Close the dialog box.


RMON-Based Alerts

You can configure the switch to send Call Home notifications corresponding to RMON alert triggers. All RMON-based Call Home messages have their message level set to NOTIFY (2). The RMON alert group is defined for all RMON-based Call Home alerts. To receive an RMON-based Call Home alert, you must associate a destination profile with the RMON alert group.

Configuring RMON Alerts Using Fabric Manager

To configure RMON alert groups using Fabric Manager, follow these steps:


Step 1 Select a switch in the Fabric pane.

Step 2 Expand Switches, expand Events, and select Call Home in the Physical Attributes pane.

You see the Call Home information in the Information pane.

Step 3 Click the Profiles tab.

You see the Call Home profiles shown in Figure 60-10.

Figure 60-10 Call Home Profiles

Step 4 Select the Create Row icon.

You see the Create Call Home Profile dialog box.

Step 5 Select switches to send alerts.

Step 6 Enter the name of the profile.

Step 7 Select the message format, message size, and message severity level.

Step 8 Check the RMON check box in the AlertGroups section.

Step 9 Click Create to create the profile for the RMON-based alerts.

Step 10 Close the dialog box.


E-Mail Options

You can configure the from, reply-to, and return-receipt e-mail addresses. While most e-mail address configurations are optional, you must configure the SMTP server address for the Call Home functionality to work.

Configuring General E-Mail Options Using Fabric Manager

To configure general e-mail options using Fabric Manager, follow these steps:


Step 1 Select a switch in the Fabric pane.

Step 2 Expand Switches, expand Events, and select Call Home in the Physical Attributes pane.

You see the Call Home information in the Information pane.

Step 3 Click the e-mail Setup tab.

Figure 60-11 Call Home e-mail Setup Tab

Step 4 Select a switch in the Information pane.

Step 5 Enter the general e-mail information.

Step 6 Enter the SMTP server IP address type, IP address or name, and port.

Step 7 Click the Apply Changes icon to update the e-mail options.


Configuring HTTPS Support

Any pre-defined or user-defined destination profiles can be configured to enable or disable a particular transport method. The transport methods are HTTP and email.

To enable or disable transport method for a destination profile, follow these steps:

 
Command
Purpose

Step 1 

switch# config t

Enters configuration mode.

Step 2 

switch(config)# callhome

switch(config-callhome)#

Enters Call Home configuration submode.

Step 3 

switch(config-callhome)# destination-profile CiscoTAC-1 transport-method http

Optional. Enables predefined destination profile CiscoTAC-1 for http transport-method.

Note For user-defined destination profiles, e-mail is the default. You can enable either or both transport mechanisms. If you disable both methods, e-mail will be enabled.

Step 4 

switch(config-callhome)# no destination-profile CiscoTAC-1 transport-method email

Optional. Disables predefined destination profile CiscoTAC-1 for email transport-method.

Step 5 

switch(config-callhome)# destination-profile full-txt transport-method http

Optional. Enables predefined full-txt-destination profile for HTTP transport method.

Periodic Inventory Notification

You can configure the switch to periodically send a message with an inventory of all the software services currently enabled and running on the switch along with hardware inventory information. The inventory is modified each time the switch is restarted nondisruptively.

By default, this feature is disabled in all switches in the Cisco MDS 9000 Family. When you enable this feature without configuring an interval value, the Call Home message is sent every 7 days. This value ranges from 1 to 30 days.

Enabling Periodic Inventory Notifications Using Fabric Manager

To enable periodic inventory notification in a Cisco MDS 9000 Family switch using Fabric Manager, follow these steps:


Step 1 Select a switch in the Fabric pane.

Step 2 Expand Switches, expand Events, and select Call Home in the Physical Attributes pane.

You see the Call Home information in the Information pane.

Step 3 Click the Periodic Inventory tab.

You see the Call Home periodic inventory information shown in Figure 60-12.

Figure 60-12 Call Home Periodic Inventory Tab

Step 4 Select a switch in the Information pane.

Step 5 Check the Enable check box.

Step 6 Enter the number of days for which you want the inventory checked.

Step 7 Click the Apply Changes icon.


Duplicate Message Throttle

You can configure a throttling mechanism to limit the number of Call Home messages received for the same event. If the same message is sent multiple times from the switch within a short period of time, you may be swamped with a large number of duplicate messages.

By default, this feature is enabled in all switches in the Cisco MDS 9000 Family. When enabled, if the number of messages sent exceeds the maximum limit of 30 messages within the 2-hour time frame, then further messages for that alert type are discarded within that time frame. You cannot modify the time frame or the message counter limit.

If 2 hours have elapsed since the first such message was sent and a new message has to be sent, then the new message is sent and the time frame is reset to the time when the new message was sent and the count is reset to 1.

Enabling Message Throttling Using Fabric Manager

To enable message throttling in a Cisco MDS 9000 Family switch using Fabric Manager, follow these steps:


Step 1 Select a switch in the Fabric pane.

Step 2 Expand Switches, expand Events, and select Call Home in the Physical Attributes pane.

You see the Call Home information in the Information pane.

Step 3 Click the Control tab.

You see the information shown in Figure 60-13.

Figure 60-13 Call Home Control Tab

Step 4 Select a switch in the Information pane.

Step 5 Check the Duplicate Message Throttle check box.

Step 6 Click the Apply Changes icon.


Call Home Enable Function

Once you have configured the contact information, you must enable the Call Home function.

Enabling Call Home Using Fabric Manager

To enable the Call Home function using Fabric Manager, follow these steps:


Step 1 Select a switch in the Fabric pane.

Step 2 Expand Switches, expand Events, and select Call Home in the Physical Attributes pane.

You see the Call Home information in the Information pane.

Step 3 Click the Control tab.

You see the information shown in Figure 60-14.

Figure 60-14 Call Home Control Tab

Step 4 Select a switch in the Information pane.

Step 5 Check the Enable check box.

Step 6 Click the Apply Changes icon.


Call Home Configuration Distribution

You can enable fabric distribution for all Cisco MDS switches in the fabric. When you perform Call Home configurations, and distribution is enabled, that configuration is distributed to all the switches in the fabric.

You automatically acquire a fabric-wide lock when you perform the first configuration operation after you enabled distribution in a switch. The Call Home application uses the effective and pending database model to store or commit the configuration changes. When you commit the configuration changes, the effective database is overwritten by the configuration changes in the pending database and all the switches in the fabric receive the same configuration. After making the configuration changes, you can choose to discard the changes by aborting the changes instead of committing them. In either case, the lock is released. See Chapter 13, "Using the CFS Infrastructure" for more information on the CFS application.


Note The switch priority and the Syscontact name are not distributed.


Enabling Call Home Fabric Distribution Using Fabric Manager

To enable Call Home fabric distribution using Fabric Manager, follow these steps:


Step 1 Select a switch in the Fabric pane.

Step 2 Expand Switches, expand Events, and select Call Home in the Physical Attributes pane.

You see the Call Home information in the Information pane.

Step 3 Click the CFS tab.

You see the CFS information for Call Home shown in Figure 60-15.

Figure 60-15 Call Home CFS Tab

Step 4 Select a switch in the Information pane.

Step 5 Select Enable from the drop-down list in the Admin column in the row for that switch.

Step 6 Click the Apply Changes icon to commit the changes.


Fabric Lock Override

If you have performed a Call Home task and have forgotten to release the lock by either committing or discarding the changes, an administrator can release the lock from any switch in the fabric. If the administrator performs this task, your changes to the pending database are discarded and the fabric lock is released.


Tip The changes are only available in the volatile directory and are subject to being discarded if the switch is restarted.


Database Merge Guidelines

See the "CFS Merge Support" section on page 13-9 for detailed concepts.

When merging two Call Home databases, follow these guidelines:

Be aware that the merged database contains the following information:

A superset of all the destination profiles from the dominant and subordinate switches that take part in the merge protocol.

The e-mail addresses and alert groups for the destination profiles.

Other configuration information (for example, message throttling, periodic inventory) from the switch that existed in the dominant switch before the merge.

Verify that two destination profiles do not have the same name (even if they have different configuration information) on the subordinate and dominant switches. If they do contain the same name, the merge operation will fail. You must then modify or delete the conflicting destination profile on the required switch.

Call Home Communications Test

You can test Call Home communications by sending a test message to the configured destination(s) or sending a test inventory message to the configured destination(s).

Testing Call Home Using Fabric Manager

To test the Call Home function and simulate a message generation using Fabric Manager, follow these steps:


Step 1 Select a switch in the Fabric pane.

Step 2 Expand Switches, expand Events, and select Call Home in the Physical Attributes pane.

You see the Call Home information in the Information pane.

Step 3 Click the Test tab.

You see the configured tests for the switch and the status of the last testing.

Step 4 Select a switch in the Information pane.

Step 5 Select test or testWithInventory from the TestAction drop-down list in the row for that switch.

Step 6 Click the Apply Changes icon to run the test.


Clearing Call Home Name Server Database

When the Call Home name server database is full, a new entry cannot be added. The device is not allowed to come online.

To clear the name server database, increase the database size or perform a cleanup by removing unused devices. A total of 20,000 name server entries are supported.


Configuring EMC E-mail Home Delayed Traps

Fabric Manager can be configured to generate EMC E-mail Home XML e-mail messages. In SAN-OS Release 3.x or earlier, Fabric Manager listens to interface traps and generates EMC E-mail Home e-mail messages. Link traps are generated when an interface goes to down from up or vice versa. For example, if there is a scheduled server reboot, the link goes down and Fabric Manager generates an e-mail notification.

Cisco NX-OS Release 4.1(3) provides the ability to generate a delayed trap so that the number of generated e-mail messages is reduced. This method filters server reboots and avoids generating unnecessary EMC E-mail Home e-mail messages. In NX-OS Release 4.1(3), users have the ability to select the current existing feature or this new delayed trap feature.

Configuring Delayed Traps Using Cisco Fabric Manager

The server.callhome.delayedtrap.enable property is added to section 9 Call Home in the server.properties configuration file. The property file can enable the Fabric Manager server to use delayed traps instead of regular linkDown traps for EMC E-mail Home messages. To enable this feature, you need to turn on delayed traps at switch level, and then set the server.callhome.delayedtrap.enable property in the server.properties configuration file to true. By default, the server.callhome.delayedtrap.enable option is disabled and regular linkDown traps are used.

To enable delayed traps on switches running NX-OS Release 4.1(3) and later using Fabric Manager, follow these steps:


Step 1 In the Physical Attributes, expand Switches > Events, and select SNMP Traps.

In the table above the map layout in Fabric Manager, click the Delayed Traps tab.

Figure 60-16

Delayed Trap Dialog Box

Step 2 Check the Enable check box for the switches on which you want to enable delayed traps.

Step 3 Enter the timer value in the Delay column.

Step 4 Click Apply to save your changes.


Note If no value is entered, the default value of 4 minutes is used.


To disable delayed traps, follow these steps:


Step 1 Uncheck the Enable check box.

Figure 60-17

Delayed Trap Dialog Box

Step 2 Click Apply.


Enabling Delayed Traps Using Cisco Device Manager

To enable the delayed traps using Device Manager, follow these steps:


Step 1 In Device Manager choose Admin > Events > Filters > Delayed Traps

You can see the Events Filters information in the Information pane.

Step 2 Click the Delayed Traps tab.

Figure 60-18

Delayed Traps Dialog Box

Step 3 Check the Enable check box to enable delayed traps.

Delay interval will only be available when the feature is enabled.

Step 4 To disable Delayed Traps, uncheck the Enable check box and click Apply.

Figure 60-19

Disable Traps Dialog Box


Sample Syslog Alert Notification in Full-txt Format

source:MDS9000
Switch Priority:7
Device Id:DS-C9506@C@FG@07120011
Customer Id:basu
Contract Id:123
Site Id:San Jose
Server Id:DS-C9506@C@FG@07120011
Time of Event:2004-10-08T11:10:44
Message Name:SYSLOG_ALERT
Message Type:Syslog
Severity Level:2
System Name:10.76.100.177
Contact Name:Basavaraj B
Contact e-mail:admin@yourcompany.com
Contact Phone:+91-80-310-1718
Street Address:#71 , Miller's Road
Event Description:2004 Oct  8 11:10:44 10.76.100.177 %PORT-5-IF_TRUNK_UP: %$VSAN 1%$ 
Interface fc2/5, vsan 1 is up

syslog_facility:PORT
start chassis information:
Affected Chassis:DS-C9506
Affected Chassis Serial Number:FG@07120011
Affected Chassis Hardware Version:0.104
Affected Chassis Software Version:3.1(1)
Affected Chassis Part No:73-8607-01
end chassis information:

Sample Syslog Alert Notification in XML Format

<?xml version="1.0" encoding="UTF-8" ?>
<soap-env:Envelope xmlns:soap-env="http://www.w3.org/2003/05/soap-envelope">
<soap-env:Header>
<aml-session:Session xmlns:aml-session="http://www.cisco.com/2004/01/aml-session" 
soap-env:mustUnderstand="true" 
soap-env:role="http://www.w3.org/2003/05/soap-envelope/role/next">
<aml-session:To>http://tools.cisco.com/neddce/services/DDCEService</aml-session:To>
<aml-session:Path>
<aml-session:Via>http://www.cisco.com/appliance/uri</aml-session:Via>
</aml-session:Path>
<aml-session:From>http://www.cisco.com/appliance/uri</aml-session:From>
<aml-session:MessageId>1004:FOX090306QT:3E55A81A</aml-session:MessageId>
</aml-session:Session>
</soap-env:Header>
<soap-env:Body>
<aml-block:Block xmlns:aml-block="http://www.cisco.com/2004/01/aml-block">
<aml-block:Header>
<aml-block:Type>http://www.cisco.com/2005/05/callhome/syslog</aml-block:Type>
<aml-block:CreationDate>2003-02-21 04:16:18 GMT+00:00</aml-block:CreationDate>
<aml-block:Builder>
<aml-block:Name>MDS</aml-block:Name>
<aml-block:Version>4.1</aml-block:Version>
</aml-block:Builder>
<aml-block:BlockGroup>
<aml-block:GroupId>1005:FOX090306QT:3E55A81A</aml-block:GroupId>
<aml-block:Number>0</aml-block:Number>
<aml-block:IsLast>true</aml-block:IsLast>
<aml-block:IsPrimary>true</aml-block:IsPrimary>
<aml-block:WaitForPrimary>false</aml-block:WaitForPrimary>
</aml-block:BlockGroup>
<aml-block:Severity>6</aml-block:Severity>
</aml-block:Header>
<aml-block:Content>
<ch:CallHome xmlns:ch="http://www.cisco.com/2005/05/callhome" version="1.0">
<ch:EventTime>2003-02-21 04:16:18 GMT+00:00</ch:EventTime> 
<ch:MessageDescription>LICENSE_VIOLATION 2003 Feb 21 04:16:18 switch %$  
%DAEMON-3-SYSTEM_MSG: &lt;&lt;%LICMGR-3-LOG_LICAPP_NO_LIC&gt;&gt; License file is missing 
for feature SAN_EXTN_OVER_IP</ch:MessageDescription>
<ch:Event>
<ch:Type>syslog</ch:Type>
<ch:SubType>LICENSE_VIOLATION</ch:SubType>
<ch:Brand>Cisco</ch:Brand>
<ch:Series>MDS9000</ch:Series>
</ch:Event>
<ch:CustomerData>
<ch:UserData>
<ch:e-mail>esajjana@cisco.com</ch:e-mail>
</ch:UserData>
<ch:ContractData>
<ch:CustomerId>eeranna</ch:CustomerId>
<ch:SiteId>Bangalore</ch:SiteId>
<ch:ContractId>123</ch:ContractId>
<ch:DeviceId>DS-C9216I-K9@C@FOX090306QT</ch:DeviceId>
</ch:ContractData>
<ch:SystemInfo>
<ch:Name>switch</ch:Name>
<ch:Contact>Eeranna</ch:Contact>
<ch:Contacte-mail>esajjana@cisco.com</ch:Contacte-mail>
<ch:ContactPhoneNumber>+91-80-310-1718</ch:ContactPhoneNumber>
<ch:StreetAddress>#71, Miller&apos;s Road</ch:StreetAddress> </ch:SystemInfo> 
</ch:CustomerData> <ch:Device> <rme:Chassis xmlns:rme="http://www.cisco.com/rme/4.0">
<rme:Model>DS-C9216I-K9</rme:Model>
<rme:HardwareVersion>1.0</rme:HardwareVersion>
<rme:SerialNumber>FOX090306QT</rme:SerialNumber>
</rme:Chassis>
</ch:Device>
</ch:CallHome>
</aml-block:Content>
<aml-block:Attachments>
<aml-block:Attachment type="inline">
<aml-block:Name>show logging logfile | tail -n 200</aml-block:Name> <aml-block:Data 
encoding="plain">
<![CDATA[syslog_show:: command: 1055 param_count: 0
2003 Feb 21 04:11:48  %KERN-2-SYSTEM_MSG: Starting kernel... - kernel
2003 Feb 21 04:11:48  %KERN-3-SYSTEM_MSG: CMOS: Module initialized - kernel
2003 Feb 21 04:11:48  %KERN-2-SYSTEM_MSG: CARD TYPE: KING BB Index = 2344 - kernel
2003 Feb 21 04:12:04  %MODULE-5-ACTIVE_SUP_OK: Supervisor 1 is active (serial: 
JAB100700MC)
2003 Feb 21 04:12:04  %PLATFORM-5-MOD_STATUS: Module 1 current-status is 
MOD_STATUS_ONLINE/OK
2003 Feb 21 04:12:06  %IMAGE_DNLD-SLOT1-5-ADDON_IMG_DNLD_COMPLETE:  Addon module image 
download process completed. Addon Image download completed, installing image please wait..
2003 Feb 21 04:12:07  %IMAGE_DNLD-SLOT1-5-ADDON_IMG_DNLD_SUCCESSFUL:  Addon module image 
download and install process successful. Addon image installed.
2003 Feb 21 04:12:08  %KERN-3-SYSTEM_MSG: klm_af_xipc: Unknown parameter `start&apos; - 
kernel
2003 Feb 21 04:12:08  %KERN-3-SYSTEM_MSG: klm_ips_portcfg: Unknown parameter `start&apos; 
- kernel
2003 Feb 21 04:12:08  %KERN-3-SYSTEM_MSG: klm_flamingo: Unknown parameter `start&apos; - 
kernel
2003 Feb 21 04:12:10  %PORT-5-IF_UP: Interface mgmt0 is up
2003 Feb 21 04:12:21 switch %LICMGR-3-LOG_LIC_FILE_MISSING: License file(s) missing for 
feature ENTERPRISE_PKG.
2003 Feb 21 04:12:21 switch %LICMGR-3-LOG_LIC_FILE_MISSING: License file(s) missing for 
feature SAN_EXTN_OVER_IP.
2003 Feb 21 04:12:21 switch %LICMGR-3-LOG_LIC_FILE_MISSING: License file(s) missing for 
feature ENTERPRISE_PKG.
2003 Feb 21 04:12:21 switch %LICMGR-3-LOG_LIC_FILE_MISSING: License file(s) missing for 
feature SAN_EXTN_OVER_IP.
2003 Feb 21 04:12:23 switch %PLATFORM-5-MOD_STATUS: Module 1 current-status is 
MOD_STATUS_ONLINE/OK
2003 Feb 21 04:12:23 switch %MODULE-5-MOD_OK: Module 1 is online (serial: JAB100700MC)
2003 Feb 21 04:12:25 switch %PORT-5-IF_DOWN_ADMIN_DOWN: %$VSAN 1%$ Interface fc1/1 is down 
(Administratively down)
2003 Feb 21 04:12:25 switch %PORT-5-IF_DOWN_ADMIN_DOWN: %$VSAN 1%$ Interface fc1/2 is down 
(Administratively down)
2003 Feb 21 04:12:25 switch %PORT-5-IF_DOWN_ADMIN_DOWN: %$VSAN 1%$ Interface fc1/3 is down 
(Administratively down)
2003 Feb 21 04:12:25 switch %PORT-5-IF_DOWN_ADMIN_DOWN: %$VSAN 1%$ Interface fc1/4 is down 
(Administratively down)
2003 Feb 21 04:12:26 switch %PLATFORM-5-PS_STATUS: PowerSupply 1 current-status is PS_FAIL
2003 Feb 21 04:12:26 switch %PLATFORM-2-PS_FAIL: Power supply 1 failed or shut down 
(Serial number QCS1007109F)
2003 Feb 21 04:12:26 switch %PLATFORM-5-PS_FOUND: Power supply 2 found (Serial number 
QCS1007109R)
2003 Feb 21 04:12:26 switch %PLATFORM-2-PS_OK: Power supply 2 ok (Serial number 
QCS1007109R)
2003 Feb 21 04:12:26 switch %PLATFORM-5-PS_STATUS: PowerSupply 2 current-status is PS_OK
2003 Feb 21 04:12:26 switch %PLATFORM-2-PS_FANOK: Fan in Power supply 2 ok
2003 Feb 21 04:12:26 switch %PLATFORM-5-FAN_DETECT: Fan module 1 (Serial number 
NWG0901031X) ChassisFan1 detected
2003 Feb 21 04:12:26 switch %PLATFORM-2-FAN_OK: Fan module ok
2003 Feb 21 04:12:26 switch %PLATFORM-2-CHASSIS_CLKMODOK: Chassis clock module A ok
2003 Feb 21 04:12:26 switch %PLATFORM-2-CHASSIS_CLKSRC: Current chassis clock source is 
clock-A
2003 Feb 21 04:12:26 switch %PORT-5-IF_DOWN_ADMIN_DOWN: %$VSAN 1%$ Interface fc1/5 is down 
(Administratively down)
2003 Feb 21 04:12:26 switch %PORT-5-IF_DOWN_ADMIN_DOWN: %$VSAN 1%$ Interface fc1/6 is down 
(Administratively down)
2003 Feb 21 04:12:26 switch %PORT-5-IF_DOWN_ADMIN_DOWN: %$VSAN 1%$ Interface fc1/7 is down 
(Administratively down)
2003 Feb 21 04:12:26 switch %PORT-5-IF_DOWN_ADMIN_DOWN: %$VSAN 1%$ Interface fc1/8 is down 
(Administratively down)
2003 Feb 21 04:12:26 switch %PORT-5-IF_DOWN_ADMIN_DOWN: %$VSAN 1%$ Interface fc1/9 is down 
(Administratively down)
2003 Feb 21 04:12:26 switch %PORT-5-IF_DOWN_ADMIN_DOWN: %$VSAN 1%$ Interface fc1/10 is 
down (Administratively down)
2003 Feb 21 04:12:27 switch %PORT-5-IF_DOWN_ADMIN_DOWN: %$VSAN 1%$ Interface fc1/11 is 
down (Administratively down)
2003 Feb 21 04:12:27 switch %PORT-5-IF_DOWN_ADMIN_DOWN: %$VSAN 1%$ Interface fc1/12 is 
down (Administratively down)
2003 Feb 21 04:12:27 switch %PORT-5-IF_DOWN_ADMIN_DOWN: %$VSAN 1%$ Interface fc1/13 is 
down (Administratively down)
2003 Feb 21 04:12:27 switch %PORT-5-IF_DOWN_ADMIN_DOWN: %$VSAN 1%$ Interface fc1/14 is 
down (Administratively down)
2003 Feb 21 04:12:30 switch %PLATFORM-2-MOD_DETECT: Module 2 detected (Serial number 
JAB0923016X) Module-Type IP Storage Services Module Model DS-X9304-SMIP
2003 Feb 21 04:12:30 switch %MODULE-2-MOD_UNKNOWN: Module type [25] in slot 2 is not 
supported
2003 Feb 21 04:12:45 switch %VSHD-5-VSHD_SYSLOG_CONFIG_I: Configured from vty by root on 
console0
2003 Feb 21 04:14:06 switch %VSHD-5-VSHD_SYSLOG_CONFIG_I: Configured from vty by admin on 
console0
2003 Feb 21 04:15:12 switch %VSHD-5-VSHD_SYSLOG_CONFIG_I: Configured from vty by admin on 
console0
2003 Feb 21 04:15:52 switch %SYSMGR-3-BASIC_TRACE: core_copy: PID 1643 with message Core 
not generated by system for licmgr(0). WCOREDUMP(9) returned zero . 
2003 Feb 21 04:15:52 switch %SYSMGR-2-SERVICE_CRASHED: Service \"licmgr\" (PID 2272) 
hasn&apos;t caught signal 9 (no core).
2003 Feb 21 04:16:18 switch %LICMGR-3-LOG_LIC_FILE_MISSING: License file(s) missing for 
feature ENTERPRISE_PKG.
2003 Feb 21 04:16:18 switch %LICMGR-3-LOG_LIC_FILE_MISSING: License file(s) missing for 
feature SAN_EXTN_OVER_IP.
2003 Feb 21 04:16:18 switch %LICMGR-3-LOG_LIC_FILE_MISSING: License file(s) missing for 
feature ENTERPRISE_PKG.
2003 Feb 21 04:16:18 switch %LICMGR-3-LOG_LIC_FILE_MISSING: License file(s) missing for 
feature SAN_EXTN_OVER_IP.
2003 Feb 21 04:16:18 switch %CALLHOME-2-EVENT: LICENSE_VIOLATION
2003 Feb 21 04:16:18 switch %CALLHOME-2-EVENT: LICENSE_VIOLATION
2003 Feb 21 04:16:18 switch %CALLHOME-2-EVENT: LICENSE_VIOLATION
2003 Feb 21 04:16:18 switch %CALLHOME-2-EVENT: LICENSE_VIOLATION ]]> </aml-block:Data> 
</aml-block:Attachment> <aml-block:Attachment type="inline"> <aml-block:Name>show license 
usage</aml-block:Name> <aml-block:Data encoding="plain">
<![CDATA[Feature                      Ins  Lic   Status Expiry Date Comments
                                 Count
--------------------------------------------------------------------------------
DMM_184_PKG                   No    0   Unused             Grace expired
FM_SERVER_PKG                 No    -   Unused             Grace expired
MAINFRAME_PKG                 No    -   Unused             Grace expired
ENTERPRISE_PKG                Yes   -   Unused never       license missing
DMM_FOR_SSM_PKG               No    0   Unused             Grace expired
SAN_EXTN_OVER_IP              Yes   8   Unused never       8 license(s) missing
PORT_ACTIVATION_PKG           No    0   Unused             -
SME_FOR_IPS_184_PKG           No    0   Unused             Grace expired
STORAGE_SERVICES_184          No    0   Unused             Grace expired
SAN_EXTN_OVER_IP_18_4         No    0   Unused             Grace expired
SAN_EXTN_OVER_IP_IPS2         No    0   Unused             Grace expired
SAN_EXTN_OVER_IP_IPS4         No    0   Unused             Grace expired
STORAGE_SERVICES_SSN16        No    0   Unused             Grace expired
10G_PORT_ACTIVATION_PKG       No    0   Unused             -
STORAGE_SERVICES_ENABLER_PKG  No    0   Unused             Grace expired
--------------------------------------------------------------------------------
**** WARNING: License file(s) missing. **** ]]> </aml-block:Data> </aml-block:Attachment> 
</aml-block:Attachments> </aml-block:Block> </soap-env:Body> </soap-env:Envelope>

Sample RMON Notification in XML Format

<?xml version="1.0" encoding="UTF-8" ?>
<soap-env:Envelope xmlns:soap-env="http://www.w3.org/2003/05/soap-envelope">
<soap-env:Header>
<aml-session:Session xmlns:aml-session="http://www.cisco.com/2004/01/aml-session" 
soap-env:mustUnderstand="true" 
soap-env:role="http://www.w3.org/2003/05/soap-envelope/role/next">
<aml-session:To>http://tools.cisco.com/neddce/services/DDCEService</aml-session:To>
<aml-session:Path>
<aml-session:Via>http://www.cisco.com/appliance/uri</aml-session:Via>
</aml-session:Path>
<aml-session:From>http://www.cisco.com/appliance/uri</aml-session:From>
<aml-session:MessageId>1086:FHH0927006V:48BA26BD</aml-session:MessageId>
</aml-session:Session>
</soap-env:Header>
<soap-env:Body>
<aml-block:Block xmlns:aml-block="http://www.cisco.com/2004/01/aml-block">
<aml-block:Header>
<aml-block:Type>http://www.cisco.com/2005/05/callhome/diagnostic</aml-block:Type>
<aml-block:CreationDate>2008-08-31 05:06:05 GMT+00:00</aml-block:CreationDate>
<aml-block:Builder>
<aml-block:Name>MDS</aml-block:Name>
<aml-block:Version>4.1</aml-block:Version>
</aml-block:Builder>
<aml-block:BlockGroup>
<aml-block:GroupId>1087:FHH0927006V:48BA26BD</aml-block:GroupId>
<aml-block:Number>0</aml-block:Number>
<aml-block:IsLast>true</aml-block:IsLast>
<aml-block:IsPrimary>true</aml-block:IsPrimary>
<aml-block:WaitForPrimary>false</aml-block:WaitForPrimary>
</aml-block:BlockGroup>
<aml-block:Severity>2</aml-block:Severity>
</aml-block:Header>
<aml-block:Content>
<ch:CallHome xmlns:ch="http://www.cisco.com/2005/05/callhome" version="1.0">
<ch:EventTime>2008-08-31 05:06:05 GMT+00:00</ch:EventTime>
<ch:MessageDescription>RMON_ALERT WARNING(4) Falling:iso.3.6.1.4.1.9.9.305.1.1.1.0=1 &lt;= 
89:1, 4</ch:MessageDescription>
<ch:Event>
<ch:Type>diagnostic</ch:Type>
<ch:SubType>GOLD-major</ch:SubType>
<ch:Brand>Cisco</ch:Brand>
<ch:Series>MDS9000</ch:Series>
</ch:Event>
<ch:CustomerData>
<ch:UserData>
<ch:e-mail>mchinn@cisco.com</ch:e-mail>
</ch:UserData>
<ch:ContractData>
<ch:CustomerId>12ss</ch:CustomerId>
<ch:SiteId>2233</ch:SiteId>
<ch:ContractId>rrr55</ch:ContractId>
<ch:DeviceId>DS-C9513@C@FHH0927006V</ch:DeviceId>
</ch:ContractData>
<ch:SystemInfo>
<ch:Name>sw172-22-46-174</ch:Name>
<ch:Contact>Mani</ch:Contact>
<ch:Contacte-mail>mchinn@cisco.com</ch:Contacte-mail>
<ch:ContactPhoneNumber>+1-800-304-1234</ch:ContactPhoneNumber>
<ch:StreetAddress>1234 wwee</ch:StreetAddress>
</ch:SystemInfo>
</ch:CustomerData>
<ch:Device>
<rme:Chassis xmlns:rme="http://www.cisco.com/rme/4.0">
<rme:Model>DS-C9513</rme:Model>
<rme:HardwareVersion>0.205</rme:HardwareVersion>
<rme:SerialNumber>FHH0927006V</rme:SerialNumber>
</rme:Chassis>
</ch:Device>
</ch:CallHome>
</aml-block:Content>
</aml-block:Block>
</soap-env:Body>
</soap-env:Envelope>

Event Triggers

This section discusses Call Home trigger events. Trigger events are divided into categories, with each category assigned CLI commands to execute when the event occurs. The command output is included in the transmitted message. Table 60-2 lists the trigger events.

Table 60-2 Event Triggers 

Event
Alert Group
Event Name
Description
Call Home Message Level

Call Home

System and CISCO_TAC

SW_CRASH

A software process has crashed with a stateless restart, indicating an interruption of a service.

5

System and CISCO_TAC

SW_SYSTEM_INCONSISTENT

Inconsistency detected in software or file system.

5

Environmental and CISCO_TAC

TEMPERATURE_ALARM

Thermal sensor indicates temperature reached operating threshold.

6

POWER_SUPPLY_FAILURE

Power supply failed.

6

FAN_FAILURE

Cooling fan has failed.

5

Line Card Hardware and CISCO_TAC

LINECARD_FAILURE

Line card hardware operation failed.

7

POWER_UP_DIAGNOSTICS_FAILURE

Line card hardware failed power-up diagnostics.

7

Line Card Hardware and CISCO_TAC

PORT_FAILURE

Hardware failure of interface port(s).

6

Line Card Hardware, Supervisor Hardware, and CISCO_TAC

BOOTFLASH_FAILURE

Failure of boot compact Flash card.

6

Supervisor Hardware and CISCO_TAC

NVRAM_FAILURE

Hardware failure of NVRAM on Supervisor hardware.

6

Supervisor Hardware and CISCO_TAC

FREEDISK_FAILURE

Free disk space is below a threshold on Supervisor hardware.

6

Supervisor Hardware and CISCO_TAC

SUP_FAILURE

Supervisor hardware operation failed.

7

POWER_UP_DIAGNOSTICS_FAILURE

Supervisor hardware failed power-up diagnostics.

7

Supervisor Hardware and CISCO_TAC

INBAND_FAILURE

Failure of in-band communications path.

7

Supervisor Hardware and CISCO_TAC

EOBC_FAILURE

Ethernet out-of-band channel communications failure.

6

Call Home

Supervisor Hardware and CISCO_TAC

MGMT_PORT_FAILURE

Hardware failure of management Ethernet port.

5

License

LICENSE_VIOLATION

Feature in use is not licensed, and are turned off after grace period expiration.

6

Inventory

Inventory and CISCO_TAC

COLD_BOOT

Switch is powered up and reset to a cold boot sequence.

2

HARDWARE_INSERTION

New piece of hardware inserted into the chassis.

2

HARDWARE_REMOVAL

Hardware removed from the chassis.

2

Test

Test and CISCO_TAC

TEST

User generated test.

2

Port syslog

Syslog-group-
port

SYSLOG_ALERT

Syslog messages corresponding to the port facility.

5

RMON

RMON

RMON_ALERT

RMON alert trigger messages.

2


Table 60-3 lists event categories and command outputs.

Table 60-3 Event Categories and Executed Commands 

Event Category
Description
Executed Commands

System

show module

show version

show tech-support platform

show tech-support sysmgr

show hardware

show sprom all

Events generated by failure of a software system that is critical to unit operation.

show tech-support
show system redundancy status

Environmental

show module

show version

show environment

show logging logfile | tail -n 200

Events related to power, fan, and environment sensing elements such as temperature alarms.

show module
show environment

Line Card Hardware

show module

show version

show tech-support platform

show tech-support sysmgr

show hardware

show sprom all

Events related to standard or intelligent line card hardware.

show tech-support

Supervisor Hardware

show module

show version

show tech-support platform

show tech-support sysmgr

show hardware

show sprom all

Events related to supervisor modules.

show tech-support

Inventory

show module

show version

show hardware

show inventory

show system uptime

show sprom all

show license usage

Inventory status is provided whenever a unit is cold booted, or when FRUs are inserted or removed. This is considered a noncritical event, and the information is used for status and entitlement.

show version

Test

show module

show version

User generated test message.

show version


Call Home Message Levels

Call Home messages (sent for syslog alert groups) have the syslog severity level mapped to the Call Home message level (see the "Syslog-Based Alerts" section).

This section discusses the severity levels for a Call Home message when using one or more switches in the Cisco MDS 9000 Family. Call Home message levels are preassigned per event type.

Severity levels range from 0 to 9, with 9 having the highest urgency. Each syslog level has keywords and a corresponding syslog level as listed in Table 60-4.


Note Call Home does not change the syslog message level in the message text. The syslog message texts in the Call Home log appear as they are described in the Cisco MDS 9000 Family System Messages Guide.



Note Call Home severity levels are not the same as system message logging severity levels (see Chapter 59, "Configuring System Message Logging" and the Cisco MDS 9000 Family System Messages Guide).


Table 60-4 Severity and Syslog Level Mapping 

Call Home Level
Keyword Used
Syslog Level
Description

Catastrophic (9)

Catastrophic

N/A

Network wide catastrophic failure.

Disaster (8)

Disaster

N/A

Significant network impact.

Fatal (7)

Fatal

Emergency (0)

System is unusable.

Critical (6)

Critical

Alert (1)

Critical conditions, immediate attention needed.

Major (5)

Major

Critical (2)

Major conditions.

Minor (4)

Minor

Error (3)

Minor conditions.

Warning (3)

Warning

Warning (4)

Warning conditions.

Notify (2)

Notification

Notice (5)

Basic notification and informational messages. Possibly independently insignificant.

Normal (1)

Normal

Information (6)

Normal event signifying return to normal state.

Debug (0)

Debugging

Debug (7)

Debugging messages.


Message Contents

The following contact information can be configured on the switch:

Name of the contact person

Phone number of the contact person

E-mail address of the contact person

Mailing address to which replacement parts must be shipped, if required

Site ID of the network where the site is deployed

Contract ID to identify the service contract of the customer with the service provider

Table 60-5 describes the short text formatting option for all message types.

Table 60-5 Short Text Messages 

Data Item
Description

Device identification

Configured device name

Date/time stamp

Time stamp of the triggering event

Error isolation message

Plain English description of triggering event

Alarm urgency level

Error level such as that applied to system message


Table 60-6, Table 60-7, and Table 60-8 display the information contained in plain text and XML messages.

Table 60-6 Reactive Event Message Format 

Data Item
(Plain text and XML)
Description
(Plain text and XML)
XML Tag
(XML only)

Time stamp

Date and time stamp of event in ISO time notation: YYYY-MM-DDTHH:MM:SS.

Note The time zone or daylight savings time (DST) offset from UTC has already been added or subtracted. T is the hardcoded limiter for the time.

/mml/header/time - ch:EventTime

Message name

Name of message. Specific event names are listed in the "Event Triggers" section.

/mml/header/name

Message type

Specifically "Call Home."

/mml/header/type - ch:Type

Message group

Specifically "reactive."

/mml/header/group

Severity level

Severity level of message (see Table 60-4).

/mml/header/level - aml-block:Severity

Source ID

Product type for routing.

/mml/header/source - ch:Series

Device ID

Unique device identifier (UDI) for end device generating message. This field should empty if the message is non-specific to a fabric switch. Format: type@Sid@serial, where

type is the product model number from backplane SEEPROM.

@ is a separator character.

Sid is "C," identifying the serial ID as a chassis serial number·

serial is the number identified by the Sid field.

Example: DS-C9509@C@12345678

/mml/ header/deviceId

Customer ID

Optional user-configurable field used for contract info or other ID by any support service.

/mml/header/customerID - ch:CustomerId

Contract ID

Optional user-configurable field used for contract info or other ID by any support service.

/mml/header/contractId - ch:ContractId>

Site ID

Optional user-configurable field used for Cisco-supplied site ID or other data meaningful to alternate support service.

/mml/header/siterId - ch:SiteId

Server ID

If the message is generated from the fabric switch, it is the unique device identifier (UDI) of the switch.

Format: type@Sid@serial, where

type is the product model number from backplane SEEPROM.

@ is a separator character.

Sid is "C" identifying the serial ID as a chassis serial number·

serial is the number identified by the Sid field.

Example: "DS-C9509@C@12345678

/mml/header/serverId - -blank-

Message description

Short text describing the error.

/mml/body/msgDesc - ch:MessageDescription

Device name

Node that experienced the event. This is the host name of the device.

/mml/body/sysName - ch:SystemInfo/Name

Contact name

Name of person to contact for issues associated with the node experiencing the event.

/mml/body/sysContact - ch:SystemInfo/Contact

Contact e-mail

E-mail address of person identified as contact for this unit.

/mml/body/sysContacte-mail - ch:SystemInfo/Contacte-mail

Contact phone number

Phone number of the person identified as the contact for this unit.

/mml/body/sysContactPhoneNumber - ch:SystemInfo/ContactPhoneNumber

Street address

Optional field containing street address for RMA part shipments associated with this unit.

/mml/body/sysStreetAddress - ch:SystemInfo/StreetAddress

Model name

Model name of the switch. This is the specific model as part of a product family name.

/mml/body/chassis/name - rme:Chassis/Model

Serial number

Chassis serial number of the unit.

/mml/body/chassis/serialNo - rme:Chassis/SerialNumber

Chassis part number

Top assembly number of the chassis.

/mml/body/fru/partNo - rme:chassis/Card/PartNumber

Chassis hardware version

Hardware version of chassis.

/mml/body/chassis/hwVersion - rme:Chassis/HardwareVersion

Supervisor module software version

Top level software version.

/mml/body/fru/swVersion - rme:chassis/Card/SoftwareIdentity

Affected FRU name

Name of the affected FRU generating the event message.

/mml/body/fru/name - rme:chassis/Card/Model

Affected FRU serial number

Serial number of affected FRU.

/mml/body/fru/serialNo - rme:chassis/Card/SerialNumber

Affected FRU part number

Part number of affected FRU.

/mml/body/fru/partNo - rme:chassis/Card/PartNumber

FRU slot

Slot number of FRU generating the event message.

/mml/body/fru/slot - rme:chassis/Card/LocationWithinContainer

FRU hardware version

Hardware version of affected FRU.

/mml/body/fru/hwVersion - rme:chassis/Card/SoftwareIdentity

FRU software version

Software version(s) running on affected FRU.

/mml/body/fru/swVersion - rme:chassis/Card/SoftwareIdentity

Command output name

The exact name of the issued command.

/mml/attachments/attachment/name - aml-block:Attachment/Name

Attachment type

Specifically command output.

/mml/attachments/attachment/type - aml-block:Attachment type

MIME type

Normally text or plain or encoding type.

/mml/attachments/attachment/mime - aml-block:Attachment/Data encoding

Command output text

Output of command automatically executed (see Table 60-3).

/mml/attachments/attachment/atdata - aml-block:Attachment/Data


Table 60-7 Inventory Event Message Format 

Data Item
(Plain text and XML)
Description
(Plain text and XML)
XML Tag
(XML only)

Time stamp

Date and time stamp of event in ISO time notation: YYYY-MM-DDTHH:MM:SS.

Note The time zone or daylight savings time (DST) offset from UTC has already been added or subtracted. T is the hardcoded limiter for the time.

/mml/header/time - ch:EventTime

Message name

Name of message. Specifically "Inventory Update" Specific event names are listed in the "Event Triggers" section.

/mml/header/name

Message type

Specifically "Inventory Update".

/mml/header/type - ch-inv:Type

Message group

Specifically "proactive".

/mml/header/group

Severity level

Severity level of inventory event is level 2 (seeTable 60-4).

/mml/header/level - aml-block:Severity

Source ID

Product type for routing at Cisco. Specifically "MDS 9000"

/mml/header/source - ch-inv:Series

Device ID

Unique Device Identifier (UDI) for end device generating message. This field should empty if the message is non-specific to a fabric switch. Format: type@Sid@serial, where

type is the product model number from backplane SEEPROM.

@ is a separator character.

Sid is "C" identifying the serial ID as a chassis serial number·

serial is the number identified by the Sid field.

Example: DS-C9509@C@12345678

/mml/ header /deviceId

Customer ID

Optional user-configurable field used for contact info or other ID by any support service.

/mml/header/customerID - ch-inv:CustomerId

Contract ID

Optional user-configurable field used for contact info or other ID by any support service.

/mml/header/contractId - ch-inv:ContractId>

Site ID

Optional user-configurable field, can be used for Cisco-supplied site ID or other data meaningful to alternate support service.

/mml/header/siterId - ch-inv:SiteId

Server ID

If the message is generated from the fabric switch, it is the Unique device identifier (UDI) of the switch.

Format: type@Sid@serial, where

type is the product model number from backplane SEEPROM.

@ is a separator character.

Sid is "C" identifying the serial ID as a chassis serial number·

serial is the number identified by the Sid field.

Example: "DS-C9509@C@12345678

/mml/header/serverId - -blank-

Message description

Short text describing the error.

/mml/body/msgDesc - ch-inv:MessageDescription

Device name

Node that experienced the event.

/mml/body/sysName - ch-inv:SystemInfo/Name

Contact name

Name of person to contact for issues associated with the node experiencing the event.

/mml/body/sysContact - ch-inv:SystemInfo/Contact

Contact e-mail

E-mail address of person identified as contact for this unit.

/mml/body/sysContacte-mail - ch-inv:SystemInfo/Contacte-mail

Contact phone number

Phone number of the person identified as the contact for this unit.

/mml/body/sysContactPhoneNumber - ch-inv:SystemInfo/ContactPhoneNumber

Street address

Optional field containing street address for RMA part shipments associated with this unit.

/mml/body/sysStreetAddress - ch-inv:SystemInfo/StreetAddress

Model name

Model name of the unit. This is the specific model as part of a product family name.

/mml/body/chassis/name - rme:Chassis/Model

Serial number

Chassis serial number of the unit.

/mml/body/chassis/serialNo - rme:Chassis/SerialNumber

Chassis part number

Top assembly number of the chassis.

/mml/body/fru/partNo - rme:chassis/Card/PartNumber

Chassis hardware version

Hardware version of chassis.

/mml/body/fru/hwVersion - rme:chassis/Card/SoftwareIdentity

Supervisor module software version

Top level software version.

/mml/body/fru/swVersion - rme:chassis/Card/SoftwareIdentity

FRU name

Name of the affected FRU generating the event message.

/mml/body/fru/name - rme:chassis/Card/Model

FRU s/n

Serial number of FRU.

/mml/body/fru/serialNo - rme:chassis/Card/SerialNumber

FRU part number

Part number of FRU.

/mml/body/fru/partNo - rme:chassis/Card/PartNumber

FRU slot

Slot number of FRU.

/mml/body/fru/slot - rme:chassis/Card/LocationWithinContainer

FRU hardware version

Hardware version of FRU.

/mml/body/fru/hwVersion - rme:chassis/Card/SoftwareIdentity

FRU software version

Software version(s) running on FRU.

/mml/body/fru/swVersion - rme:chassis/Card/SoftwareIdentity

Command output name

The exact name of the issued command.

/mml/attachments/attachment/name - aml-block:Attachment/Name

Attachment type

Specifically command output.

/mml/attachments/attachment/type - aml-block:Attachment type

MIME type

Normally text or plain or encoding type.

/mml/attachments/attachment/mime - aml-block:Attachment/Data encoding

Command output text

Output of command automatically executed after event categories (see "Event Triggers" section).

/mml/attachments/attachment/atdata - aml-block:Attachment/Data


Table 60-8 User-Generated Test Message Format 

Data Item
(Plain text and XML)
Description
(Plain text and XML)
XML Tag
(XML only)

Time stamp

Date and time stamp of event in ISO time notation: YYYY-MM-DDTHH:MM:SS.

Note The time zone or daylight savings time (DST) offset from UTC has already been added or subtracted. T is the hardcoded limiter for the time.

/mml/header/time - ch:EventTime

Message name

Name of message. Specifically test message for test type message. Specific event names listed in the "Event Triggers" section).

/mml/header/name

Message type

Specifically "Test Call Home".

/mml/header/type - ch:Type

Message group

This field should be ignored by the receiving Call Home processing application, but may be populated with either "proactive" or "reactive".

/mml/header/group

Severity level

Severity level of message, test Call Home message (see Table 60-4).

/mml/header/level - aml-block:Severity

Source ID

Product type for routing.

/mml/header/source - ch:Series

Device ID

Unique device identifier (UDI) for end device generating message. This field should empty if the message is non-specific to a fabric switch. Format: type@Sid@serial, where

type is the product model number from backplane SEEPROM.

@ is a separator character.

Sid is "C" identifying the serial ID as a chassis serial number·

serial is the number identified by the Sid field.

Example: DS-C9509@C@12345678

/mml/ header /deviceId

Customer ID

Optional user-configurable field used for contract info or other ID by any support service.

/mml/header/customerID - ch:CustomerId

Contract ID

Optional user-configurable field used for contract info or other ID by any support service.

/mml/header/contractId - ch:ContractId

Site ID

Optional user-configurable field used for Cisco-supplied site ID or other data meaningful to alternate support service.

/mml/header/siterId - ch:SiteId

Server ID

If the message is generated from the fabric switch, it is the Unique device identifier (UDI) of the switch.

Format: type@Sid@serial, where

type is the product model number from backplane SEEPROM.

@ is a separator character.

Sid is "C" identifying the serial ID as a chassis serial number·

serial is the number identified by the Sid field.

Example: "DS-C9509@C@12345678

/mml/header/serverId - -blank-

Message description

Short text describing the error.

/mml/body/msgDesc - ch:MessageDescription

Device name

Switch that experienced the event.

/mml/body/sysName - ch:SystemInfo/Name

Contact name

Name of person to contact for issues associated with the node experiencing the event.

/mml/body/sysContact - ch:SystemInfo/Contact

Contact e-mail

E-mail address of person identified as contact for this unit.

/mml/body/sysContacte-mail - ch:SystemInfo/Contacte-mail

Contact phone number

Phone number of the person identified as the contact for this unit.

/mml/body/sysContactPhoneNumber - ch:SystemInfo/ContactPhoneNumber

Street address

Optional field containing street address for RMA part shipments associated with this unit.

/mml/body/sysStreetAddress - ch:SystemInfo/StreetAddress

Model name

Model name of the switch. This is the specific model as part of a product family name.

/mml/body/chassis/name - rme:Chassis/Model

Serial number

Chassis serial number of the unit.

/mml/body/chassis/serialNo - rme:Chassis/SerialNumber

Chassis part number

Top assembly number of the chassis. For example, 800-xxx-xxxx.

/mml/body/fru/partNo - rme:chassis/Card/PartNumber

Command output text

Output of command automatically executed after event categories listed in Table 60-3.

/mml/attachments/attachment/atdata - aml-block:Attachment/Data

MIME type

Normally text or plain or encoding type.

/mml/attachments/attachment/mime - aml-block:Attachment/Data encoding

Attachment type

Specifically command output.

/mml/attachments/attachment/type - aml-block:Attachment type

Command output name

The exact name of the issued command.

/mml/attachments/attachment/name - aml-block:Attachment/Name


Default Settings

Table 60-9 lists the default Call Home settings.

Table 60-9 Default Call Home Default Settings  

Parameters
Default

Destination message size for a message sent in full text format.

500,000

Destination message size for a message sent in XML format.

500,000

Destination message size for a message sent in short text format.

4000

DNS or IP address of the SMTP server to reach the server if no port is specified.

25

Alert group association with profile.

All

Format type.

XML

Call Home message level.

0 (zero)