Broadband Access Aggregation and DSL Configuration Guide, Cisco IOS XE Release 3S
Broadband IPv6 Counter Support at LNS
Downloads: This chapterpdf (PDF - 1.29MB) The complete bookPDF (PDF - 5.16MB) | The complete bookePub (ePub - 1.1MB) | The complete bookMobi (Mobi - 2.29MB) | Feedback

Broadband IPv6 Counter Support at LNS

Broadband IPv6 Counter Support at LNS

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest caveats and feature information, see Bug Search Tool and the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the feature information table at the end of this module.

Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/​go/​cfn. An account on Cisco.com is not required.

Information About Broadband IPv6 Counter Support at LNS

Broadband IPv6 Counter Support at LNS

This feature provides support for broadband PPP IPv6 sessions at the layer 2 tunneling protocol (L2TP) network server (LNS). The sessions are forwarded by L2TP access concentrator (LAC) using layer 2 tunneling protocol L2TP over IPv6.

This feature is enabled automatically when the user configures LNS and enables IPv6.

How to Verify Broadband IPv6 Counter Support at LNS

Verifying Broadband IPv6 Counter Support at the LNS

This feature is enabled automatically when the user configures LNS and enables IPv6. To verify information about this feature, you can use any or all of the following optional commands as needed.

SUMMARY STEPS

    1.    enable

    2.    show l2tp session [all | packets [ipv6] | sequence | state | [brief | circuit | interworking] [hostname]] [ip-addr ip-addr[vcid vcid] | tunnel{id local-tunnel-id local-session-id| remote-name remote-tunnel-name local-tunnel-name}| username username | vcid vcid]

    3.    show l2tp tunnel [all | packets [ipv6] | state | summary | transport] [id local-tunnel-id | local-name local-tunnel-name remote-tunnel-name| remote-name remote-tunnel-name local-tunnel-name]

    4.    show l2tun session [l2tp | pptp] [all [filter] | brief [filter] [hostname] | circuit [filter] [hostname] | interworking [filter] [hostname] | packets ipv6] [filter] | sequence [filter] | state [filter]]

    5.    show vpdn session [l2f | l2tp | pptp] [all | packets [ipv6] | sequence | state [filter]]

    6.    show vpdn tunnel [l2f | l2tp | pptp] [all [filter] | packets ipv6] [filter] | state [filter] | summary [filter] | transport[filter]]


DETAILED STEPS
     Command or ActionPurpose
    Step 1 enable


    Example:
    Router> enable
     

    Enables privileged EXEC mode.

    • Enter your password if prompted.

     
    Step 2 show l2tp session [all | packets [ipv6] | sequence | state | [brief | circuit | interworking] [hostname]] [ip-addr ip-addr[vcid vcid] | tunnel{id local-tunnel-id local-session-id| remote-name remote-tunnel-name local-tunnel-name}| username username | vcid vcid]


    Example:
    Router# show l2tp session packets ipv6 
     

    Displays information about L2TP sessions.

     
    Step 3 show l2tp tunnel [all | packets [ipv6] | state | summary | transport] [id local-tunnel-id | local-name local-tunnel-name remote-tunnel-name| remote-name remote-tunnel-name local-tunnel-name]


    Example:
    Router# show l2tp tunnel packets ipv6
     

    Displays details about L2TP tunnels.

     
    Step 4 show l2tun session [l2tp | pptp] [all [filter] | brief [filter] [hostname] | circuit [filter] [hostname] | interworking [filter] [hostname] | packets ipv6] [filter] | sequence [filter] | state [filter]]


    Example:
    Router# show l2tun session packets ipv6
     

    Displays the current state of Layer 2 sessions and protocol information about L2TP control channels.

     
    Step 5 show vpdn session [l2f | l2tp | pptp] [all | packets [ipv6] | sequence | state [filter]]


    Example:
    Router# show vpdn session packets ipv6 
     

    Displays session information about active Layer 2 sessions for a virtual private dialup network (VPDN).

     
    Step 6 show vpdn tunnel [l2f | l2tp | pptp] [all [filter] | packets ipv6] [filter] | state [filter] | summary [filter] | transport[filter]]


    Example:
    Router# show vpdn tunnel packets ipv6
     

    Displays information about active Layer 2 tunnels for a VPDN.

     

    Configuration Examples for Broadband IPv6 Counter Support at LNS

    Examples: Verifying Broadband IPv6 Counter Support at the LNS

    Example: show l2tp session Command

    The show l2tp session command used with the packets and ipv6keywords displays information about IPv6 packets and byte counts in an L2TP session.

    Router# show l2tp session packets ipv6
    
     
    		
    L2TP Session Information Total tunnels 1 sessions 1
    
     
    		
    LocID      RemID      TunID      Pkts-In    Pkts-Out   Bytes-In   Bytes-Out
    16791      53352      27723      30301740   30301742   20159754280 20523375360

    Example: show l2tp tunnel Command

    The show l2tp tunnel command used with the packets and ipv6 keywords displays information about IPv6 packet statistics and byte counts in L2TP tunnels.

    Router# show l2tp tunnel packets ipv6
    L2TP Tunnel Information Total tunnels 1 sessions 1
    LocTunID   Pkts-In    Pkts-Out   Bytes-In   Bytes-Out
    27723      63060379   63060383   39400320490 40157045438

    Example: show l2tun session Command

    The show l2tun session command used with the packetsand ipv6keywords displays information about IPv6 packet statistics and byte counts in an L2TUN session.

    Router# show l2tun session packets ipv6
    L2TP Session Information Total tunnels 1 sessions 1
    LocID      RemID      TunID      Pkts-In    Pkts-Out   Bytes-In   Bytes-Out
    16791      53352      27723      31120707   31120708   21285014938 21658462236

    Example: show vpdn session Command

    The show vpdn session command used with the l2tp, packets, and ipv6keywords displays session information about IPv6 packet statistics and byte counts in an active layer 2 session for a VPDN.

    Router# show vpdn session l2tp packets ipv6
    L2TP Session Information Total tunnels 1 sessions 1
    LocID      RemID      TunID      Pkts-In    Pkts-Out   Bytes-In   Bytes-Out
    16791      53352      27723      35215536   35215538   22616342688 23038929320

    Example: show vpdn tunnel Command

    The show vpdn tunnelcommand used with the l2tp, packets, and ipv6keywords displays session information about IPv6 packet statistics and byte counts in an active layer 2 tunnel for a VPDN.

    Device# show vpdn tunnel l2tp packets ipv6
    L2TP Tunnel Information Total tunnels 1 sessions 1
    LocTunID   Pkts-In    Pkts-Out   Bytes-In   Bytes-Out
    27723      61422447   61422451   37149801922 37886871686

    Additional References

    Related Documents

    Related Topic

    Document Title

    IPv6 addressing and connectivity

    IPv6 Configuration Guide

    Cisco IOS commands

    Cisco IOS Master Commands List, All Releases

    IPv6 commands

    Cisco IOS IPv6 Command Reference

    Cisco IOS IPv6 features

    Cisco_​IOS_​IPv6_​Feature_​Mapping

    Standards and RFCs

    Standard/RFC

    Title

    RFCs for IPv6

    MIBs

    MIB

    MIBs Link

    To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at the following URL:

    http:/​/​www.cisco.com/​go/​mibs

    Technical Assistance

    Description

    Link

    The Cisco Support and Documentation website provides online resources to download documentation, software, and tools. Use these resources to install and configure the software and to troubleshoot and resolve technical issues with Cisco products and technologies. Access to most tools on the Cisco Support and Documentation website requires a Cisco.com user ID and password.

    http:/​/​www.cisco.com/​cisco/​web/​support/​index.html

    Feature Information for Broadband IPv6 Counter Support at LNS

    The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.

    Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/​go/​cfn. An account on Cisco.com is not required.

    Table 1 Feature Information for Broadband IPv6 Counter Support at LNS

    Feature Name

    Releases

    Feature Information

    Broadband IPv6 Counter Support at LNS

    Cisco IOS XE Release 2.6

    This feature provides support for broadband PPP IPv6 sessions at the L2TP LNS. The sessions are forwarded by LAC using layer 2 tunneling protocol L2TP over IPv4.

    The following commands were introduced or modified: show l2tp session, show l2tp tunnel, show l2tun session, show vpdn session, show vpdn tunnel.