Guest

Cisco 800 Series Routers

Cisco 890 Series Integrated Services Routers Data Sheet

  • Viewing Options

  • PDF (1.0 MB)
  • Feedback

Cisco® 890 Series Integrated Services Routers combine Internet access, comprehensive security, and wireless services in a single, secure device that is easy to deploy and manage (Figure 1). The best-in-class Cisco 890 Series architecture is specifically designed to deliver high performance with concurrent services, business continuity, and investment protection for enterprise small branch offices and service provider-managed services applications.

Figure 1. Cisco 890 Series Integrated Services Router with Integrated 802.11n Access Point

Product Overview

Cisco 890 Series Integrated Services Routers (ISRs) are fixed-configuration routers that provide collaborative business solutions for secure voice and data communications to enterprise small branch offices (Figure 2). They are designed to deliver secure broadband, Metro Ethernet, wireless LAN (WLAN) connectivity, and business continuity. The routers also come with powerful management tools, such as the web-based Cisco Configuration Professional configuration management tool, which simplifies setup and deployment. Centralized management capabilities give network managers visibility and control of the network configurations at the remote site.

Cisco 890 Series Integrated Services Routers offer the following:

The routers offer high performance for secure broadband and Metro Ethernet access with concurrent services for enterprise small branch offices.

They provide business continuity and WAN diversity with redundant WAN links: Fast Ethernet (FE), V.92, ISDN Basic Rate Interface (BRI), Gigabit Ethernet (GE), ADSL2+/VDSL (Annex A/B/M), Multimode G.SHDSL, and Small Form-Factor Pluggable (SFP).

An integrated secure 802.11a/g/n access point (optional) is based on the draft 802.11n standard. Dual-band radios allow for mobility and support for autonomous or Cisco Unified WLAN architectures.

The routers offer enhanced security including:

- Firewall with advance application and control for email, instant messaging (IM), and HTTP traffic

- Site-to-site remote-access and dynamic VPN services: IP Security (IPsec) VPNs (Triple Data Encryption Standard [3DES] or Advanced Encryption Standard [AES], Dynamic Multipoint VPN [DMVPN], Group Encrypted Transport VPN with onboard acceleration, and Secure Sockets Layer [SSL] VPN)

- Intrusion prevention system (IPS): An inline, deep-packet-inspection feature that mitigates a wide range of network attacks

- Web security with Cisco ScanSafe deployment

The 8-port 10/100 Fast Ethernet managed switch offers VLAN support and 4-port support for Power over Ethernet (PoE) (optional for certain models) to power IP phones or external access points. The Cisco 892FSP, 896VA, 897VA, 898EA, and 891F have an 8-port 10/100/1000 Gigabit Ethernet managed switch with VLAN support. No PoE support is available for the Cisco 892FSP. For the PoE option on the Cisco 896VA, 897VA, 898EA, and 891F models, there is a 125W power supply adapter to power the unit and the 4 PoE ports. On the Cisco 891 and 892 a second 80W power supply adapter provides power to the PoE ports.

Metro Ethernet features include:

- One 1000BASE-T Gigabit Ethernet WAN port

- One 10/100BASE-T Fast Ethernet WAN port on the Cisco 891, 892, and Cisco 891F or 1-port Gigabit Ethernet WAN port on the Cisco 892FSP, 896VA, 897VA, and 898EA

- One 1-port Gigabit Ethernet SFP socket for WAN connectivity on the Cisco 892F, 892FSP, 896VA, 897VA, 898EA, and 891F

(Note: Only the 1000BASE-T Gigabit Ethernet WAN or the SFP is operational at a given time.)

- Intelligent hierarchical quality of service (HQoS): Support for hierarchical queuing and shaping

- Connectivity Fault Management (CFM), based on 802.1ag

- 802.3ah standards-based link operations, administration, and maintenance (OA&M)

- Ethernet Local Management Interface (E-LMI) for the customer edge

- CFM Interworking and backward compatibility

- Performance management based on IP service-level agreement (SLA) for Ethernet

Dedicated console and auxiliary ports for configuration and management.

Two USB 2.0 ports for security eToken credentials, booting, and loading configuration from USB available on the Cisco 891, 892, and 892F.

Cisco 892FSP, 896VA, 897VA, 898EA, and 891F are fanless, providing a quiet, comfortable working environment in small offices.

One USB 2.0 port for booting and loading configurations from the USB port is available on the Cisco 892FSP, 896VA, 897VA, 898EA, and 891F.

Easy to set up and deploy, the Cisco 890 ISRs offer centralized and remote-management capabilities through web-based tools and Cisco IOS® Software.

Table 1 summarizes the Cisco 890 Series models.

Table 1. Cisco 890 Series Models

Models

WAN Interface

LAN Interfaces

802.11a/g/n Option

Integrated USB 2.0/AUX/Console

Integrated Dial Backup

Cisco 891

1-port GE

1-port FE

8-port 10-/100-Mbps managed switch

Yes

Yes/Yes/Yes

V.92 analog modem

Cisco 892

1-port GE

1-port FE

8-port 10-/100-Mbps managed switch

Yes

Yes/Yes/Yes

ISDN BRI

Cisco 892F

1-port GE or 1‑port SFP

1-port FE

8-port 10-/100-Mbps managed switch

Yes

Yes/Yes/Yes

ISDN BRI

Cisco 892FSP

1-port GE or 1-port SFP

1-port GE

8-port 10-/100-/1000-Mbps managed switch

No

Yes/Yes/Yes

No

Cisco 896VA

1-port GE or 1-port SFP

VDSL/ADSL2+ Annex B

8-port 10-/100-/1000-Mbps managed switch

No

Yes/Yes/Yes

ISDN

Cisco 897VA

1-port GE or 1-port SFP

VDSL/ADSL2+ Annex A/M

8-port 10-/100-/1000-Mbps managed switch

Yes

Cisco CleanAir® technology

Yes/Yes/Yes

ISDN (only on Cisco 897VA-K9)

Cisco 898EA

1-port GE or 1-port SFP

4 pair Ethernet in the first mile (EFM)

8-port 10-/100-/1000-Mbps managed switch

No

Yes/Yes/Yes

No

Cisco 891F

1-port GE or 1-port SFP

1-port FE

8-port 10-/100-/1000-Mbps managed switch

Yes

Cisco CleanAir technology

Yes/Yes/Yes

V.92 analog modem

ISDN BRI

Figure 2 illustrates a typical enterprise small branch-office deployment.

Figure 2. Typical Enterprise Small Branch-Office Deployment

Architecture Features and Benefits

Secure Network Connectivity

Cisco 890 Series Routers deliver high performance with integrated security and threat defense. Network security has become a fundamental building block of any network, and Cisco routers play an important role in embedding security at the customer’s access edge. Cisco recognizes this requirement, so Cisco 890 Series Routers are equipped with security hardware acceleration and Cisco IOS Software (by default, a universal image with Advanced IP Services feature license). This Cisco IOS Software feature set facilitates hardware-based IPsec encryption on the motherboard and provides a robust array of security capabilities such as Cisco IOS Firewall, Cisco ScanSafe Connector, IPS support, IPsec VPNs (DES, 3DES, and AES), SSL VPN, tunnel-less Group Encrypted Transport VPN, DMVPN, Easy VPN server and client support, Secure Shell (SSH) Protocol Version 2.0, and Simple Network Management Protocol (SNMP) in one solution set.

Cisco 890 Series Routers come with a comprehensive security solution that protects organizations’ networks from known and new Internet vulnerabilities and attacks while improving employee productivity. Security suite also includes the following:

FlexVPN: Large customers deploying IPsec VPN over IP networks are faced with high complexity and high cost of deploying multiple types of VPN to meet different types of connectivity requirements. Customers often have to learn different type of VPNs to manage and operate different types of networks. And when a technology is selected for a deployment, migrating or adding functions to enhance the VPN is often avoided. FlexVPN was created to simplify the deployment of VPN and address the complexity of multiple solutions, and, as a unified ecosystem, to cover all types of VPNs: remote-access, teleworker, site-to-site, mobility, managed security services, and others.

Next-generation encryption (NGE): Traditional encryption standards (Internet Key Exchange Version 1 [IKEv1], Secure Hash Algorithm1 [SHA-1], etc.) were developed more than a decade ago. They are no longer considered as secure as before. NGE is meant to refresh the existing security protocols to the next level based on the standard Suite-B algorithms such as SHA-2, AES-Galois Counter Mode (AES-GCM), Elliptic Curve Diffie-Hellman (ECDH), Elliptic Curve Digital Signature Algorithm (ECDSA), IKEv2, etc. NGE offers customers secure network communications systems that will be reliable for the next decade.

Cisco ISR Web Security with Cisco ScanSafe: Cisco Cloud Web Security is a cloud-based service designed to prevent zero-day malware from reaching corporate networks, including roaming or mobile users. The Cisco ScanSafe Cloud Web Security solution requires no hardware, initial capital costs, or maintenance and provides unparalleled real-time threat protection (Figure 3). This solution is scalable and easy to maintain, and is ideally suited for small businesses and enterprise small branch offices.

Figure 3. Typical Cisco ISR Web Security with Cisco ScanSafe Deployment

Metro Ethernet Connectivity

Cisco 890 Series Routers are ideal for service provider deployments as Metro Ethernet customer premises equipment (CPE). The routers also provide failover protection and load balancing. The 8-port managed switch provides enough LAN ports for connecting multiple devices, and the optional PoE capability can supply power to IP phones or other devices. The Cisco 890 Series offers customers significant value by simplifying deployment of Ethernet WAN services with end-to-end OA&M, service-level agreement (SLA) monitoring and verification, and configuration management, resulting in increased operational efficiency and reduced operating expenses (OpEx).

The Cisco 890 Series supports the following Metro Ethernet features:

E-LMI: Basic configuration for detection and isolation of connectivity in the Metro Ethernet network

E-LMI: Automated configuration of customer edge based on profiles configured:

- Layer 2 connectivity management

- E-LMI for the customer edge

Metro Ethernet OA&M:

- Debugging hierarchy of Ethernet networks

- Layer 2 service performance monitoring

802.1agCFM:

- Standard that uses domains to contain OA&M flows and bound OA&M responsibilities

802.3ah: Ethernet in the First Mile (EFM)

- Three types of packets: Continuity Check, Layer 2 Ping, and Layer 2 Traceroute

IP SLA for Ethernet

Figure 4 shows a typical small branch-office Metro Ethernet deployment.

Figure 4. Typical Metro Ethernet Deployment

High Availability

Cisco 890 Series Routers enable customers to deliver high-performance, high-availability, mission-critical business applications (Figure 5). The Cisco IOS Software universal image with Advanced IP Services feature license (default) offers basic and advanced routing capabilities to deliver failover protection and load balancing. These capabilities include Virtual Router Redundancy Protocol (VRRP) (RFC 2338), Hot Standby Router Protocol (HSRP), MultigroupHSRP (MHSRP), and dial backup with external modem through a virtual auxiliary port. Cisco 890 Series Routers are integrated with ISDN BRI (892, 896, and 897 models), a V.92 analog modem (891 model), or a Gigabit Ethernet port for a secondary WAN backup connection. The Cisco 891F supports both the ISDN BRI and a V.92 analog modem with a Fast Ethernet port for a secondary WAN backup connection. If the primary Ethernet-access WAN is disconnected, the router detects this failure and fails over to the secondary backup WAN.

Figure 5. High Availability

Integrated Wireless LAN Capability

The Cisco 890 Series is ideal for enterprise small branch offices and small businesses that need to be connected to larger enterprise networks. These routers help extend corporate networks to secure remote sites while giving users access to the same applications found in a corporate office. They provide increased reliability for diversity of wireless data, voice, and video applications. When users require WLAN access, visibility and control of network security are even more critical at the remote site. The Cisco 890 Series meets this need with a single device that combines integrated 802.11a/g/n capabilities with security features such as Wi-Fi Protected Access (WPA), including authentication with IEEE 802.1X with Cisco Extensible Authentication Protocol (LEAP) and Protected EAP (PEAP), and encryption with WPA Temporal Key Integrity Protocol (TKIP). The Cisco 890 Series wireless models that include the integrated access point have full feature parity with the Cisco Aironet® 1250 Series Access Point and can be used in either autonomous or Cisco Unified WLAN modes. In Cisco Unified WLAN mode, as part of an enterprise WLAN architecture, all WLAN functions are centrally managed through Cisco Wireless LAN Controllers and the Cisco Wireless Control System (WCS). The Cisco 897 and 891F with wireless support Cisco CleanAir technology.

Figure 6 shows a Cisco 890 Series Router deployed in an enterprise small branch-office WLAN application.

Figure 6. Enterprise Small Branch-Office WLAN

Manageability

Cisco 890 Series Routers support a whole suite of management tools to provide ease of use. Tools such as Cisco Configuration Professional use smart wizards and task-based tutorials, which resellers and customers can use to quickly and easily deploy, configure, and monitor a Cisco access router without requiring knowledge of the Cisco IOS Software command-line interface (CLI).

Table 2 lists the features and benefits of the Cisco 890 Series Routers.

Table 2. Features and Benefits of Cisco 890 Series Routers

Feature

Benefit

Increased performance for concurrent services

Router performance allows customers to take advantage of broadband network speeds while running secure, concurrent data, voice, video, and wireless services.

Integrated Gigabit Ethernet, SFP, and Fast Ethernet WAN ports

Integrated ports offer flexibility in Ethernet WAN access, and the additional capability to deploy redundant WAN connections for failover protections and load balancing.
Refer to Table 1 for details about the WAN interface.

Option of integrated 8-port 10/100BASE-T managed switch or integrated 8-port 10/100/1000BASE-T managed switch

Fully managed LAN switch ports connect multiple LAN devices and reduce the need for an additional LAN switch.
The Cisco 891, 892, and 892F support 10/100BASE-T.
The Cisco 892FSP, 896VA, 897VA, 898EA, and 891F support 10/100/1000BASE-T.

Integrated WAN backup

Refer to Table 1 for details about the backup WAN interface.

Real-time clock

A built-in, real-time clock maintains an accurate date and time for applications that require an accurate time stamp, such as logging and digital certificates.

Enhanced security

An integrated stateful and application inspection firewall provides network perimeter security.
High-speed IPsec 3DES and AES encryption offers data privacy over the Internet.
Intrusion prevention enforces security policy in a larger enterprise or service provider network.
Web Security is supported with Cisco ScanSafe deployments.

Optional dual-radio or dual-band IEEE 802.11n access point

The Cisco 890 Series offers a secure, integrated access point in a single device. It supports both autonomous and unified modes. It is backward-compatible with 802.11a/b/g.
The router supports IEEE 802.11n draft 2.0 and uses multiple-input, multiple-output (MIMO) technology that provides increased throughput, reliability, and predictability.
Refer to Table 1 for details about Wi-Fi options.

Separate console, auxiliary, and USB ports

One auxiliary and one console port enable remote configuration and management.
The router has two USB 2.0 flash memory or security eTokens. Integrated USB ports can be configured to work with an optional USB token for off-platform storage of VPN credentials or for deployment of configurations stored on USB flash-memory devices.

Unified wireless management

Configuration and management of access points is automated and simplified without manual intervention.
A unified hybrid remote-edge access point (HREAP) provides the following:

WLAN services to remote and branch offices without deploying a wireless LAN controller at each location.

Central configuration and control of unified WLAN services for remote offices through a WAN link.

Flexibility in setting up wireless access at remote locations by specifying how traffic is to be bridged or tunneled.

Cisco Configuration Professional

Cisco Configuration Professional uses smart wizards and task-based tutorials, which resellers and customers can use to quickly and easily deploy, configure, and monitor a Cisco access router without requiring knowledge of the Cisco IOS Software CLI.

Summary

Cisco 890 Series Integrated Services Routers combine increased network performance with advanced security and wireless technology to allow enterprise small branch-office customers to get the most from their broadband connections. Service providers and value-added resellers can take advantage of the Cisco 890 Series to provide a true business-class broadband service. The Cisco 890 Series delivers on the requirements of enterprise small branch offices and managed services providers.

Product Specifications

Tables 3 and 4 list software and hardware features of the Cisco 890 Series.

Table 3. Cisco IOS Software Features on Cisco 890 Series Routers: Advanced IP Features Set (Default)

Feature

Description

IP and IP services features

Routing Information Protocol Versions 1 and 2 (RIPv1 and RIPv2)
Generic routing encapsulation (GRE) and multipoint GRE (MGRE)
Cisco Express Forwarding
Standard 802.1d Spanning Tree Protocol
Layer 2 Tunneling Protocol (L2TP)
Layer 2 Tunneling Protocol Version 3 (L2TPv3)
Network Address Translation (NAT)
Dynamic Host Configuration Protocol (DHCP) server, relay, and client
Dynamic Domain Name System (DNS)
DNS Proxy
DNS Spoofing
Access control lists (ACLs)
IPv4 and IPv6 Multicast
Open Shortest Path First (OSPF)
Border Gateway Protocol (BGP)
Performance Routing (PfR)
Enhanced Interior Gateway Routing Protocol (EIGRP)
Virtual Route Forwarding (VRF) Lite
Next Hop Resolution Protocol (NHRP)
Bidirectional Forwarding Detection (BFD)
Web Cache Communication Protocol (WCCP)

xDSL

True Multimode VDSL2/ADSL2+ over Annex A, B, J, and M including traditional G.DMT and T1.413
World-class interoperability with industry-standard DSL access multiplexer (DSLAM) chipsets
Highest field reliability with Impulse Noise Protection over REIN/SHINE, Extended INP-Delay, G.INP, Physical Layer Retransmission, SRA, and Bitswap
VDSL2 PSD Profiles upto 17a/b with support for Spectral Shaping
VDSL2 Vectoring to offer blazing fiber speeds over copper
Support for 4-pair multimode G.SHDSL; that is, ATM and EFM
Remote management with TR069/CWMP
Investment protection with GE/SFP for Future Fiber that could replace xDSL deployment

Switch features

Auto Media Device In/Media Device Cross Over (MDI-MDX)
14 802.1QVLANs
MAC filtering
Four-port 802.3af and Cisco compliant PoE
Switched Port Analyzer (SPAN)
Storm Control
Smart ports
Secure MAC address
Internet Group Management Protocol Version 3 (IGMPv3) snooping
802.1x

Security features

Secure connectivity:

SSL VPN for secure remote access
Hardware-accelerated DES, 3DES, AES 128, AES 192, and AES 256
Public-key-infrastructure (PKI) support
Fifty IPsec tunnels
Cisco Easy VPN Client and Server
NAT transparency
DMVPN
Tunnel-less Group Encrypted Transport VPN
IPsec stateful failover
VRF-aware IPsec
IPsec over IPv6
Adaptive control technology
Session Initiation Protocol (SIP) application-layer gateway
Cisco IOS Firewall:

Zone-Based Policy Firewall

VRF-aware stateful inspection routing firewall

Stateful inspection transparent firewall

Advanced application inspection and control
Secure HTTP (HTTPS), FTP, and Telnet Authentication Proxy
Dynamic and static port security
Firewall stateful failover
VRF-aware firewall
Cisco ScanSafe Connector
Cisco IOS Software black and white lists
Integrated threat control:

IPS

Control Plane Policing
Flexible Packet Matching
Network foundation protection

QoS features

Low-Latency Queuing (LLQ)
Weighted Fair Queuing (WFQ)
Class-Based WFQ (CBWFQ)
Class-Based Traffic Shaping (CBTS)
Class-Based Traffic Policing (CBTP)
Policy-Based Routing (PBR)
Class-Based QoS MIB
Class of service (CoS)-to-differentiated services code point (DSCP) mapping
Class-Based Weighted Random Early Detection (CBWRED)
Network-Based Application Recognition (NBAR)
Link fragmentation and interleaving (LFI)
Resource Reservation Protocol (RSVP)
Real-Time Transport Protocol (RTP) header compression (cRTP)
Differentiated Services (DiffServ)
QoS preclassify and prefragmentation
HQoS

Management features

Cisco Configuration Professional
Cisco Configuration Express
Cisco Configuration Engine support
Cisco AutoInstall
IP SLA
Cisco IOS Embedded Event Manager (EEM)
CiscoWorks
Cisco Security Manager
Telnet, SNMPv3, SSH, CLI, and HTTP management
RADIUS and TACACS+
Out-of-band management with ISDN S/T port or external modem through a virtual auxiliary port on models supporting those interfaces; refer to Table 1 for details
Cisco Wireless Control System (WCS) for management of unified access points in models supporting WLAN; on models supporting WLAN, refer to Table 1 for details

High-availability features

Virtual Router Redundancy Protocol (VRRP) (RFC 2338)
HSRP
MHSRP
Dial backup with external modem through virtual auxiliary port
Dial backup with ISDN S/T or V.92 Analog modem port

Metro Ethernet features

Ethernet OA&M
E-LMI
IP SLA for Ethernet

IPv6 features

IPv6 addressing architecture
IPv6 name resolution
IPv6 statistics
IPv6 translation: Transport packets between IPv6-only and IPv4-only endpoints NAT-PT)
Internet Control Message Protocol Version 6 (ICMPv6)
IPv6 DHCP
OSPFv3
BGP4+
IPv6 path maximum transmission unit (PMTU)
IPv6 Neighbor Discovery
IPv6 stateless address autoconfiguration (SLAAC)
IPv6 Multicast Routing

Unified WLAN management

Unified access point features:

Supported by wireless LAN controller and Cisco WCS

Configurable local or central switching for HREAP mode
Radio management through Cisco WCS
Transparent roaming with mobility groups

Application visibility and control

Cisco Wide Area Application Services (WAASx)
NBAR2
Flexible NetFlow (FNF)
Performance Agent

Number of recommended users

50

Table 4. Cisco IOS Software Features on Cisco 890 Series Routers: WLAN Features (Available with Wireless Option)

Feature

Description

Standard 802.11 a/g/n access point

Optional on Cisco 890 Series models

WLAN hardware

Support for CleanAir technology on Cisco 897 and 891F
Automatic rate selection for 802.11a/g/n
Noncaptive RPTNC omnidirectional dipole antennae; 2-dBi gain @ 2.4 GHz, 5-dBi gain @ 5 GHz
2 x 3 MIMO radio operation
Wi-Fi 802.11n Draft v2.0 certified

WLAN software features

Autonomous or unified access point
Cisco WCS support for monitoring of autonomous-mode access points
Option to maximize throughput or maximize range
Software-configurable transmit power
Radio roles, including access point, root bridge, nonroot bridge, and workgroup bridge
Wi-Fi Multimedia (WMM) certification
Traffic specifications (TSPEC) Call Admission Control (CAC) to ensure voice quality is maintained
Unscheduled Automatic Power Save Delivery (UPSD) to reduce latency

WLAN security features

Standard 802.11i
WPA and AES (WPA2)
EAP authentication: Cisco LEAP, PEAP, Extensible Authentication Protocol Transport Layer Security (EAP TLS), Extensible Authentication Protocol-Flexible Authentication via Secure Tunneling (EAP-FAST), Extensible Authentication Protocol-Subscriber Information Module (EAP-SIM), Extensible Authentication Protocol-Message Digest Algorithm 5 (EAP-MD5), and Extensible Authentication Protocol‑Tunneled TLS (EAP-TTLS)
Static and dynamic Wired Equivalent Privacy (WEP)
TKIP/Simple Security Network (TKIP/SSN) encryption
MAC authentication and filter
User database for survivable local authentication using LEAP and EAP-FAST
Configurable limit to the number of wireless clients
Configurable RADIUS accounting for wireless clients
Preshared keys (PSKs) (WPA-small office or home office [WPA-SOHO])

Certifications

Service Set Identifiers (SSIDs) and Multiple Broadcast SSIDs

16

Wireless VLANs

14 (encrypted and nonencrypted VLANs)

System Specifications

Table 5 lists the system specifications for Cisco 890 Series Integrated Services Routers.

Table 5. System Specifications

Feature

Specification

Default and maximum DRAM

512 and 768 MB, respectively, on Cisco 891 and 892 Series data models ; upgrade option available
512 MB on Cisco 892F
Up to 1 GB on Cisco 892FSP, 896VA, 897VA, 898EA, and 891F data models; upgrade option available

Default and maximum flash memory

256 on all Cisco 890 models; not upgradable

WAN

Refer to Table 1 for details

LAN switch

Refer to Table 1 for details

Separate console and auxiliary ports

RJ-45

USB 2.0

Two USB 2.0 ports available on Cisco 891, 892, and 892F models
One USB 2.0 port available on Cisco 892FSP, 896VA, 897VA, 898EA, and 891F
USB devices supported:

USB eTokens on Cisco 891, 892, and 892F only

USB flash memory

Note: USB 2.0 ports cannot be used for connecting external devices other than those specified at: http://www.cisco.com/en/US/prod/collateral/modules/ps6247/product_data_sheet0900aecd80232473.html.

ISDN BRI S/T

Refer to Table 1 for details

Inline PoE

Optional internal adapter for inline PoE on 4 switch ports for IP phones or external wireless access points; 802.3af compliant and Cisco PoE compliant
No PoE support on Cisco 892FSP

Wireless specifications

2.4 and 5 GHz

Data rates supported

802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
802.11b: 1, 2, 5.5, 6, 9, and 11 Mbps
802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
802.11n: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54,and m0-m15

Maximum transmit power (2‑channel aggregate)

802.11a: 15dBm
802.11b: 20 dBm
802.11g: 17 dBm
802.11n: 16 dBm

Note: Maximum power setting is subject to change by channel and by region, depending on regulations.

Physical dimensions andweight

Product dimensions:

Cisco 891, 892, and 892F:

Nonwireless models:

H x W x D = 1.9 x 12.8 x 9.8 in. (4.8 x 32.5 x 24.9 cm) (includes rubber feet)
H x W x D = 1.75 x 12.8 x 9.8 in. (4.5 x 32.5 x 24.9 cm) (without rubber feet)

Wireless models:

H x W x D = 1.9 x 12.8 x 10.4 in. (4.8 x 32.5 x 26.4 cm) (includes rubber feet)
H x W x D = 1.75 x 12.8 x 10.4 in. (4.5 x 32.5 x 26.4 cm) (without rubber feet; excludes antennas)
Weight: 5.5 lb (2.5 kg) maximum

Cisco 892FSP, 896VA, 897VA, 898EA and 891F:

H x W x D =1.82 x 12.71 x 9.78 in. (4.62 x 32.28 x 24.84 cm) (includes rubber feet)
H x W x D = 1.75 x 12.71 x 9.78 in. (4.45 x 32.28 x 24.84 cm) (without rubber feet)

External power supply

Product power specifications:

AC input voltage: Universal 100 to 240 VAC

Frequency: 50 to 60 Hz

Maximum output power: 60W

Output voltages: 12 VDC

Optional POE:

Separate 80W POE power supply for Cisco 891 and 892 ISRs

Single 125W power supply required for Cisco 896, 897, 898 and 891F for router and PoE

External output voltage: 48 VDC

Approvals and compliance

Emission
47 CFR Part 15: 2006

CISPR22: 2005

EN300386: V1.3.3: 2005

EN55022: 2006

EN61000-3-2: 2000 [Inc amd 1 & 2]

EN61000-3-3: 1995 [+ amd 1: 2001]

ICES-003 Issue 4: 2004

KN 22: 2005

VCCI: V-3/2006.04

Immunity
CISPR24: 1997 [+ amd 1 & 2]

EN300386: V1.3.3: 2005

EN50082-1: 1992

EN50082-1: 1997

EN55024: 1998 [+ amd 1 & 2]

EN61000-6-1: 2001

Certifications

Environmental operatingrange

Nonoperating temperature: -4 to 149°F (-0 to 65°C)
Nonoperating humidity: 5 to 95% relative humidity (noncondensing)
Nonoperating altitude: 0 to 15,000 ft (0 to 4570m)
Operating temperature: 32 to 104°F (0 to 40°C)
Operating humidity: 10 to 85% relative humidity (noncondensing)
Operating altitude: 0 to 10,000 ft (0 to 3000m)

Ordering Information

To place an order, visit the Cisco Ordering Home Page.

For more information about the Cisco 890 Series, visit http://www.cisco.com/go/800. Table 6 lists the ordering information for Cisco 890 Series Integrated Services Routers and other available options.

Table 6. Ordering Information

Product Part Number

Product Description

Integrated Services Routers

CISCO891-K9

Cisco 891 Gigabit Ethernet security router

CISCO891W-AGN-A-K9

Cisco 891W Gigabit Ethernet security router with802.11n, FCC compliant

CISCO891W-AGN-N-K9

Cisco 891W Gigabit Ethernet security router with802.11n, Australia compliant

CISCO892-K9

Cisco 892 Gigabit Ethernet security router

CISCO892W-AGN-E-K9

Cisco 892W Gigabit Ethernet security router with802.11n,ETSI compliant

CISCO892F-K9

Cisco 892 Gigabit Ethernet security router with SFP

CISCO892FW-A-K9

Cisco 892 Gigabit security router with SFP and 802.11n, FCC compliant

CISCO892FW-E-K9

Cisco 892 Gigabit security router with SFP and 802.11n, ETSI compliant

C892FSP-K9

Cisco 892FSP Gigabit Ethernet security router with SFP

C896VA-K9

Cisco 896VA Gigabit Ethernet security router with SFP and VDSL/ADSL2+ Annex B

C897VA-K9

Cisco 897VA Gigabit Ethernet security router with SFP and VDSL/ADSL2+ Annex A

C897VAW-A-K9

Cisco 897 VA Gigabit Ethernet security router with SFP and VDSL/ADSL2+ Annex A with Wireless

C897VAW-E-K9

Cisco 897VA Gigabit Ethernet security router with SFP and VDSL/ADSL2+ Annex A with Wireless

C897VA-M-K9

Cisco 897VA Gigabit Ethernet security router with SFP and VDSL/ADSL2+ Annex M

C897VAM-W-E-K9

Cisco 897VA Gigabit Ethernet security router with SFP and VDSL/ADSL2+ Annex M with Wireless

C898EA-K9

Cisco 898EA Gigabit Ethernet security router with SFP and 4 channel multimode G.SHDSL (EFM/ATM)

C891F-K9

Cisco 891F Gigabit Ethernet security router with SFP

C891FW-A-K9

Cisco 891F Gigabit Ethernet security router with SFP and Dual Radio 802.11n Wifi for FCC -A domain

C891FW-E-K9

Cisco 891F Gigabit Ethernet security router with SFP and Dual Radio 802.11n Wifi for ETSI -E domain

*Cisco 892FSP is supported only on Cisco IOS Software Release 15.2(4)M and later

Cisco 896, 897, 898EA is supported only on Cisco IOS Software Release 15.2(4)M1 and later

Cisco 891F is supported only on Cisco IOS Software Release 15.3(3)M2, 15.4(1)T and later

Memory Options

MEM8XX-512U768D

512 MB DRAM upgrade to 768 MB for Cisco 891 and 892models

MEM8XX-512U1GBD

512 MB DRAM upgrade to 1 GB for Cisco 892F

FL-8XX-512U1GB

512 MB DRAM upgrade to 1 GB for Cisco 892FSP, 896VA, 897VA, 898EA, 891F model (Feature License)

Router Software

Image

C890-universalk9-mz: Universal image for Cisco 891, Cisco 892 and Cisco 892F

C800-universalk9-mz: Universal image for Cisco 892FSP, 896VA, 897VA, 898EA, 891F

Access Point Software

ap801-k9w7-tar

Autonomous software image for ap801

ap801-rcvk9w8-tar

Lightweight Access Point Protocol (LWAPP) recovery image for ap801

ap802-k9w7-tar

Autonomous software image for ap802

ap802-rcvk9w8-tar

Lightweight Access Point Protocol (LWAPP) recovery image for ap802

Power over Ethernet Options

800-IL-PM-4

4-port 802.3af capable internal power module for Cisco 891, Cisco 892, Cisco 892F, C896, C897, C898, C891F routers

Security Services

Scan SafeCloud Web Security

ScanSafe Connector

http://www.cisco.com/en/US/prod/vpndevc/ps6525/ps6538/ps6540/isr_web_security.html.

SSL

FL-SSLVPN25-K9

Feature license SSLVPN for up to 25 users (incremental), for 15.x based Cisco IOS Software releases only

Supported SFP Types on the Cisco 892F (*) Series and Cisco 892FSP, 896VA, 897VA, 898EA, 891F

GLC-LH-SM

1000BASE-LX/LHSFP transceiver module for MMF and SMF, 1300-nm wavelength, dual LC/PC connector

GLC-SX-MM

1000BASE-SXSFP transceiver module for MMF, 850-nm wavelength, dual LC/PC connector

GLC-ZX-SM

1000BASE-ZXSFP transceiver module for SMF, 1550-nm wavelength, dual LC/PC connector

GLC-BX-D

1000BASE-BX10SFP module for single-strand SMF, 1490-nm TX/1310-nm RX wavelength, single LC/PC connector

GLC-BX-U

1000BASE-BX10SFP module for single-strand SMF, 1310-nm TX/1490-nm RX wavelength, single LC/PC connector

GLC-T

1000BASE-T standard

GLC-GE-100FX(*)

Cisco 100BASE-FX SFP for Gigabit Ethernet SFP ports with multimode fiber-optic (MMF) link

GLC-FE-100LX(*)

Cisco 100BASE-LX10SFP with single-mode fiber-optic (SMF) link

GLC-FE-100BX-U(*)

100BASE-BX10-U SFP module for 100-MB ports, 1310nm TX/1550nm RX wavelength, 10km over single-strand SMF

GLC-FE-100BX-D(*)

100BASE-BX10-D SFP module for 100-MB ports, 1550nm TX/1310nm RX wavelength, 10km over single-strand SMF

CWDM-SFP-1470=(*)

Cisco Coarse-Wavelength Division Multiplexing (CWDM) 1470-nm SFP Gigabit Ethernet and 1G/2GFibreChannel

Rack Mount Kit for 890

ACS-890-RM-19

Rackmount kit for 890

WAASX Feature License

FL-C890-WAASX

WAASx Feature License

(*) Supported only on Cisco 892F. For more information regarding Cisco 890 Series Routers and options, contact your local Cisco representative or visit: http://www.cisco.com/go/800. To upgrade the Cisco IOS Software for the Cisco 890 Series, visit the Cisco Software Center.

Table 7 gives the Cisco IOS Software images for the Cisco 891 and 892 Integrated Services Routers.

Table 7. Cisco IOS Software Images for Cisco 890 Series

Series

Models

Image

Default Feature License

First Cisco IOS Software Release

Router Software

Cisco 890 Series

Cisco 891 and 892 models

C890-universalk9-mz

SL-890-AIS (Advanced IP Services Image feature)

12.4(22)YB and will be in 15.0[1]m.
S890VK9-12422YB

Cisco 892F Series

Cisco 892F

C890-universalk9-mz

SL-890-AIS (Advanced IP Services Image feature)

15.1(2)T2

S890VK9- 15102T2

Cisco 892FSP Series

Cisco 892FSP

C800-universalk9-mz

SL-890-AIS (Advanced IP Services Image feature)

15.2(4)M

S89UK9-15204M

Cisco 896VA, 897VA, and 898EA

Cisco 896VA, 897VA, and 898EA

C800-universalk9-mz

SL-890-AIS (Advanced IP Services Image feature)

15.2(4)M1

Cisco 891F Series

Cisco 891F

C800-universalk9-mz

SL-890-AIS (Advanced IP Services Image feature)

15.3(3)M2 and 15.4(1)T

Access Point Software

ap801

Cisco 891 and 892 models

ap801-k9w7-tar

ap801-rcvk9w8-tar (LWAPP recovery software)

-

12.4(10b)JA3

ap802

Cisco 897 and 891F models

ap802-k9w7-tar

ap802-rcvk9w8-tar(LWAPP recovery software)

-

-

Cisco Services

Cisco Services for the Branch Office

Services from Cisco and our certified partners can help you reduce the cost and complexity of branch-office deployments. We have the depth and breadth of experience across technologies to architect a blueprint for a branch-office solution to meet your company's needs. Planning and design services align technology with business goals and can increase the accuracy, speed, and efficiency of deployment. Technical services help maintain operational health, strengthen software application functions, solve performance problems, and lower expenses. Optimization services are designed to continually improve performance and help your team succeed with new technologies. For more information, visit http://www.cisco.com/go/services.

Cisco SMARTnet® technical support for the Cisco 890 Series is available on a one-time or annual contract basis. Support options range from help-desk assistance to proactive, onsite consultation. All support contracts include:

Major Cisco IOS Software updates in protocol, security, bandwidth, and feature improvements

Full access rights to Cisco.com technical libraries for technical assistance, electronic commerce, and product information

24-hour access to the industry’s largest dedicated technical support staff

For More Information

For more information about the Cisco 890 Series Integrated Services Routers, visit http://www.cisco.com/go/800 or contact your local Cisco account representative.

For more information about Cisco products, contact:

United States and Canada: 800 553-NETS (6387)

Europe: 32 2 778 4242

Australia: 61 2 9935 4107

Other: 408 526-7209

Web: http://www.cisco.com