The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
The Cisco® ASR 1000 Series Fixed Ethernet Line Cards (ASR1000-2T+20X1GE and ASR1000-6TGE) are fixed port Ethernet line cards for the Cisco ASR 1000 Series Aggregation Services Routers. The line cards are capable of 40-Gbps full-duplex traffic forwarding using a fixed-port interface design. The ASR1000-2T+20X1GE has twenty 1 Gigabit Ethernet ports and two 10 Gigabit Ethernet ports (Figure 1). The ASR1000-6TGE has six 10 Gigabit Ethernet ports (Figure 2).
The Small Form-Factor Pluggable (SFP) and 10-Gbps SFP (XFP) modules allow you to configure the line card for different media types (copper or fiber) and different optical requirements (single- or multimode fiber), as available. The line cards have one power LED, one line-card status LED, and 22 port or
link-status LEDs.
Cisco ASR 1000 Series Fixed Ethernet Line Card (ASR1000-2T+20X1GE)
Cisco ASR 1000 Series Fixed Ethernet Line Card (ASR1000-6TGE)
With these line cards, the ASR 1000 Series routers can achieve greater Ethernet density and a lower price per port. However, this fixed configuration means that the Ethernet line cards are not compatible with the Shared Port Adapters (SPAs) that are currently used with the SPA interface processors. Instead, the Ethernet line cards take the slot of the SPA interface processor. Table 1 lists the differences between the fixed Ethernet line cards and the SPA interface processors.
The Cisco ASR 1000 Series Modular Interface Processor (ASR1000-MIP100) (Figure 3) is a full-duplex 100-Gbps modular Ethernet line card that is capable of hosting up to two Cisco ASR 1000 Series Ethernet Port Adapters (EPAs) (Figures 4 through 8). The EPAs are new interface cards that introduce 40 Gigabit Ethernet and 100 Gigabit Ethernet connectivity to the Cisco ASR 1000 Series. Like the fixed Ethernet line cards, the modular interface processor with EPAs offers the same feature parity and functionality as the SPA interface processor and SPA combination. Table 1 shows the features of the three types of interface cards.
Cisco ASR 1000 Series Modular Interface Processor (ASR1000-MIP100)
Cisco ASR 1000 Series 1-port 100 Gigabit Ethernet port adapter
Cisco ASR 1000 Series 10-port 10 Gigabit Ethernet port adapter
Cisco ASR 1000 Series 18-port 1 Gigabit Ethernet port adapter
Cisco ASR 1000 Series 1-port 40 Gigabit Ethernet port adapter (2 physical QSFP ports)
Cisco ASR 1000 Series 2-port 40 Gigabit Ethernet port adapter
Cisco ASR 1000 Series 1-port 100 Gigabit Ethernet port adapter (QSFP)
Other aspects of the fixed Ethernet line cards and the modular interface processor include:
● Rich Ethernet Layer 2, Layer 3, IP, IPv6, and Multiprotocol Label Switching (MPLS) packet-processing capabilities, as previously provided on the Cisco ASR 1000 Series platforms
● Rich Quality-of-Service (QoS) functions:
◦ Ingress and egress QoS, as previously provided on the Cisco ASR 1000 Series platforms
◦ Egress queuing capability, as previously provided on the Cisco ASR 1000 Series platforms
◦ High- and low-priority lanes to Cisco ASR 1000 Series Embedded Services Processors for high priority, low-latency forwarding
The 18-port 1 Gigabit Ethernet port adapter, 10-port 10 Gigabit Ethernet port adapter, 2-port 40 Gigabit Ethernet port adapter, and 1-port 40 Gigabit Ethernet port adapter are hardware-ready for MACsec.
Table 1. SPA and EPA compatibility on Cisco ASR 1000 Series line cards
Feature |
Cisco ASR 1000 Series SPA Interface Processors |
Cisco ASR 1000 Series Fixed Ethernet Line Cards |
Cisco ASR 1000 Series Modular Interface Processor |
Shared Port Adapters (SPAs) |
Yes |
No |
No |
Ethernet Port Adapters (EPAs) |
No |
No |
Yes |
Built-in Ethernet ports |
No |
Yes |
No |
Tables 2, 3, and 4 give ordering information for the line cards and hardware, respectively, and Tables 5, 6, and 7 give the minimum Cisco IOS® XE Software version required.
Table 2. Ordering Information for Ethernet line cards and Ethernet port adapters
Product name |
Part number |
Cisco ASR 1000 Fixed Ethernet Line Card, 6x10GE |
ASR1000-6TGE |
Cisco ASR 1000 Fixed Ethernet Line Card, 2x10GE + 20x1GE |
ASR1000-2T+20X1GE |
Cisco ASR 1000 Ethernet Line Card, 100G Modular Interface Processor |
ASR1000-MIP100 |
Cisco ASR 1000 1x100GE QSFP Ethernet Port Adapter |
EPA-QSFP-1X100GE |
Cisco ASR 1000 1x100GE Ethernet Port Adapter |
EPA-1X100GE |
Cisco ASR 1000 2x40GE Ethernet Port Adapter (Native QSFP) |
EPA-2X40GE |
Cisco ASR 1000 1x40GE Ethernet Port Adapter (2 physical QSFP ports - optional license to enable 2nd port) |
EPA-1X40GE |
Cisco ASR 1000 1x40GE e-Delivery Port license for EPA-1X40GE |
L-FLA1-EPA-1X40GE= |
Cisco ASR 1000 2x40GE Ethernet Port Adapter (breakout cable) |
EPA-CPAK-2X40GE |
Cisco ASR 1000 10x10GE Ethernet Port Adapter |
EPA-10X10GE |
Cisco ASR 1000 18x1GE Ethernet Port Adapter |
EPA-18X1GE |
Table 3. Cisco ASR 1000 Series Fixed Ethernet Line Cards compatible hardware (6x10GE and 2x10GE + 20x1GE)
Product name |
Part number |
Cisco ASR 1004 Router Chassis |
ASR1004 |
Cisco ASR 1006 Router Chassis |
ASR1006 |
Cisco ASR 1006-X Router Chassis |
ASR1006-X |
Cisco ASR 1009-X Router Chassis |
ASR1009-X |
Cisco ASR 1013 Router Chassis |
ASR1013 |
Cisco ASR 1000 Route Processor 2 |
ASR1000-RP2 |
Cisco ASR 1000 Route Processor 3 |
ASR1000-RP3 |
Cisco ASR 1000 Embedded Services Processor, 40G |
ASR1000-ESP40 (Up to 4 ASR1000-2T+20X1GE/ASR1000-6TGE on ASR1013 with ESP40) |
Cisco ASR 1000 Embedded Services Processor, 100G |
ASR1000-ESP100 |
Cisco ASR 1000 Embedded Services Processor, 200G |
ASR1000-ESP200 |
Cisco ASR 1000 Embedded Services Processor, 100G |
ASR1000-ESP100-X |
Cisco ASR 1000 Embedded Services Processor, 200G |
ASR1000-ESP200-X |
Refer to the Cisco ASR 1000 Series Fixed Ethernet Line Card Hardware Installation Guide for the latest compatibility details.
Table 4. Cisco ASR 1000 Series 100G modular interface processor compatible hardware (ASR1000-MIP100)
Product name |
Part number |
Cisco ASR 1000 1x100GE QSFP Ethernet Port Adapter |
EPA-QSFP-1X100GE |
Cisco ASR 1000 1x100GE Ethernet Port Adapter |
EPA-1X100GE |
Cisco ASR 1000 2x40GE Ethernet Port Adapter (breakout cable) |
EPA-CPAK-2X40GE |
Cisco ASR 1000 10x10GE Ethernet Port Adapter |
EPA-10X10GE |
Cisco ASR 1000 18x1GE Ethernet Port Adapter |
EPA-18X1GE |
Cisco ASR 1000 2x40GE Ethernet Port Adapter (Native QSFP) |
EPA-2X40GE |
Cisco ASR 1000 1x40GE Ethernet Port Adapter |
EPA-1X40GE |
Cisco ASR 1006-X Router Chassis |
ASR1006-X |
Cisco ASR 1009-X Router Chassis |
ASR1009-X |
Cisco ASR 1013 Router Chassis |
ASR1013 |
Cisco ASR 1000 Route Processor 2 |
ASR1000-RP2 |
Cisco ASR 1000 Route Processor 3 |
ASR1000-RP3 |
Cisco ASR 1000 Embedded Services Processor, 100G |
ASR1000-ESP100 |
Cisco ASR 1000 Embedded Services Processor, 200G |
ASR1000-ESP200 |
Cisco ASR 1000 Embedded Services Processor, 100G |
ASR1000-ESP100-X |
Cisco ASR 1000 Embedded Services Processor, 200G |
ASR1000-ESP200-X |
Table 5. Minimum Cisco IOS XE Software version for Ethernet line cards
Product name |
Product number |
Minimum Cisco IOS XE Software release |
Cisco ASR 1000 Fixed Ethernet Line Card (6x10GE) |
ASR1000-6TGE |
XE 3.12 |
Cisco ASR 1000 Fixed Ethernet Line Card (20x1GE + 2x10GE) |
ASR1000-2T+20X1GE |
XE 3.10 |
Cisco ASR 1000 Ethernet Line Card, 100G Modular Interface Processor |
ASR1000-MIP100 |
XE 3.16.1 XE 16.2.1 |
Table 6. Minimum Cisco IOS XE Software version for Ethernet port adapters
Product number |
ASR1002-HX |
ASR1000-MIP100 (ASR1006-X, ASR1009-X, ASR1013) |
EPA-1X100GE |
XE 16.4.1 |
XE 3.16.1 XE 16.2.1 |
EPA-CPAK-2X40GE |
XE 16.4.1 |
XE 3.16.2 (no XE 3.17) XE 16.3.1 |
EPA-10X10GE |
XE 16.3.1 |
XE 16.2.1 |
EPA-18X1GE |
XE 16.2.1 |
XE 16.3.1 |
EPA-1X40GE |
XE 16.6.2 |
XE 16.6.2 |
EPA-2X40GE |
XE 16.6.2 |
XE 16.6.2 |
EPA-QSFP-1X100GE |
XE 16.9.1 |
XE 16.9.1 |
Table 7. Minimum Cisco IOS XE Software version for MACsec support
Product number |
ASR1001-X |
ASR1001-HX |
ASR1002-HX |
ASR1000-MIP100 (ASR1006-X, ASR1009-X ASR1013) |
Built-in 1 GE ports |
XE 3.13.1 |
XE 16.4.1 |
XE 16.3.1 |
N/A |
Built-in 10 GE ports |
XE 3.13.1 |
XE 16.4.1 |
XE 16.3.1 |
N/A |
EPA-1X100GE |
– |
– |
Does not support MACsec |
Does not support MACsec |
EPA-CPAK-2X40GE |
– |
– |
Does not support MACsec |
Does not support MACsec |
EPA-10X10GE |
– |
– |
XE 16.3.2/XE 16.4.1 |
XE 16.3.1 |
EPA-18X1GE |
– |
– |
XE 16.3.1 |
XE 16.3.2/XE 16.4.1 |
EPA-1X40GE |
– |
– |
XE 16.8.1 |
XE 16.8.1 |
EPA-2X40GE |
– |
– |
XE 16.8.1 |
XE 16.8.1 |
EPA-QSFP-1X100GE |
– |
– |
XE 16.9.1 |
XE 16.9.1 |
Table 8. Cisco ASR 1000 Series MACsec licenses
Product name |
Part number |
ASR 1000 per 1GE port MACsec license |
FLSA1-MACSEC1G |
ASR 1000 per 10GE port MACsec license |
FLSA1-MACSEC10G |
ASR 1000 per 40GE port MACsec license |
FLSA1-MACSEC40G |
ASR 1000 per 100GE port MACsec license |
FLSA1-MACSEC100G |
IPsec/MACsec License for ASR1001-X |
FLSASR1-IPSEC* |
Cisco environmental sustainability
Information about Cisco’s environmental sustainability policies and initiatives for our products, solutions, operations, and extended operations or supply chain is provided in the “Environment Sustainability” section of Cisco’s Corporate Social Responsibility (CSR) Report.
Reference links to information about key environmental sustainability topics (mentioned in the “Environment Sustainability” section of the CSR Report) are provided in the following table:
Sustainability topic |
Reference |
Information on product material content laws and regulations |
|
Information on electronic waste laws and regulations, including products, batteries, and packaging |
Cisco makes the packaging data available for informational purposes only. It may not reflect the most current legal developments, and Cisco does not represent, warrant, or guarantee that it is complete, accurate, or up to date. This information is subject to change without notice.
Cisco Services for the enterprise WAN edge
Cisco and our partners help make your enterprise WAN edge deployment a success with a broad portfolio of services based on proven methodologies. We can help you establish a secure, resilient WAN architecture and successfully integrate Cisco Unified Communications, Cisco TelePresence®, security, and mobility technologies with bandwidth to support video, collaboration, branch-office solutions, and growth in alignment with your business goals. Planning and design services align technology with business goals and can increase the accuracy, speed, and efficiency of deployment. Technical services help maintain operational health, strengthen software application functions, solve performance concerns, and lower expenses. Optimization services are designed to continually improve performance and help your team succeed with new technologies. For more information, please visit: https://www.cisco.com/go/services.
Flexible payment solutions to help you achieve your objectives
Cisco Capital makes it easier to get the right technology to achieve your objectives, enable business transformation and help you stay competitive. We can help you reduce the total cost of ownership, conserve capital, and accelerate growth. In more than 100 countries, our flexible payment solutions can help you acquire hardware, software, services and complementary third-party equipment in easy, predictable payments. Learn more.
For more information about the Cisco ASR 1000 Series Fixed Ethernet Line Cards, visit https://www.cisco.com/c/en/us/td/docs/routers/asr1000/install/guide/modular_linecard/asr1_mlc_hig/mlc_asr1_overview.html or contact your local Cisco account representative.