この製品のマニュアルセットは、偏向のない言語を使用するように配慮されています。このマニュアルセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザーインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブランゲージに対する取り組みの詳細は、こちらをご覧ください。
このドキュメントは、米国シスコ発行ドキュメントの参考和訳です。リンク情報につきましては、日本語版掲載時点で、英語版にアップデートがあり、リンク先のページが移動/変更されている場合がありますことをご了承ください。あくまでも参考和訳となりますので、正式な内容については米国サイトのドキュメントを参照ください。
次の Microsoft 展開のいずれかで Microsoft Outlook との予定表統合をセットアップするには、IM and Presence サービスで次のタスクを実行します。
コマンドまたはアクション | 目的 | |
---|---|---|
ステップ 1 | プレゼンス ゲートウェイの設定 | IM and Presence サーバで、Exchange Server または Office 365 サーバをプレゼンス ゲートウェイとして設定します。 |
ステップ 2 | Office 365 統合用のプル間隔の設定 | (Office 365 のみ)IM and Presence サービスが Office 365 から予定表情報をプルする間隔スケジュールを設定します。デフォルト値は 60 分です。 |
ステップ 3 | Exchange 統合用のサービス パラメータの設定 | (Exchange のみ)Microsoft Exchange Server との予定表同期相互作用に関するオプション サービス パラメータを設定します。 |
ステップ 4 | Cisco Presence Engine の再起動 | サービス パラメータを編集したら、Cisco Presence Engine サービスを再起動します。 |
ステップ 5 | 次の手順のいずれかを使用して、ユーザの予定表を有効にします。 | ニーズに合った手順を選択してください。 |
Microsoft Outlook との予定表統合をセットアップするには、プレゼンス ゲートウェイを設定する必要があります。Microsoft Exchange Server と Office 365 サーバのどちらかをプレゼンス ゲートウェイとして割り当てることができます。
Microsoft 統合タイプ用のオプション パラメータを設定します。
この手順は、IM and Presence サービスが Office 365 から予定表情報をプルする間隔を設定する場合に使用します。
ステップ 1 | Cisco Unified CM IM and Presence Administration から、 を選択します。 |
ステップ 2 | [サーバ(Server)] ドロップダウンから、IM and Presence パブリッシャ ノードを選択します。 |
ステップ 3 | [サービス(Service)] ドロップダウンから、[Cisco Presence Engine] を選択します。 |
ステップ 4 | [Office 365 予定表情報プル間隔(Office 365 Calendar Information Pull Interval)] サービス パラメータで、分単位で間隔を設定します。デフォルトは 60 分です。 |
ステップ 5 | [保存(Save)] をクリックします。 |
IM and Presence サービスのユーザに対して予定表を有効にします。一度に複数のユーザに対してこの機能を有効にするには、外部 LDAP ディレクトリから同期されたユーザの場合は LDAP 同期を、非 LDAP ユーザの場合は一括管理ツールを使用することができます。そうでない場合は、個別のユーザに対してこの機能を有効にすることができます。
このオプション手順は、Outlook 予定表と Microsoft Exchange Server の統合用のオプション サービス パラメータを設定する場合に使用します。パラメータの多くがデフォルト値で十分です。
ステップ 1 | Cisco Unified CM IM and Presence Administration から、 を選択します。 | ||||||||||||||
ステップ 2 | [サーバ(Server)] ドロップダウンから、IM and Presence パブリッシャ ノードを選択します。 | ||||||||||||||
ステップ 3 | [サービス(Service)] ドロップダウンから、[Cisco Presence Engine] を選択します。 | ||||||||||||||
ステップ 4 | [予定表設定(Calendaring Configuration)] で、次のパラメータの値を設定します。
| ||||||||||||||
ステップ 5 | [保存(Save)] をクリックします。 |
予定表設定サービス パラメータの値を変更した場合は、Cisco Presence Engine サービスを再起動します。
IM and Presence サービスのユーザに対して予定表を有効にします。一度に複数のユーザに対してこの機能を有効にするには、外部 LDAP ディレクトリから同期されたユーザの場合は LDAP 同期を、非 LDAP ユーザの場合は一括管理ツールを使用することができます。そうでない場合は、個別のユーザに対してこの機能を有効にすることができます。
次のタスクは、初期 LDAP ディレクトリ同期を介して予定表を有効にする場合に実行します。初期 LDAP 同期を使用して、LDAP ディレクトリから同期されたユーザの予定表を有効にすることができます。
コマンドまたはアクション | 目的 | |
---|---|---|
ステップ 1 | 機能グループ テンプレートへの予定表統合の追加 | 予定表を機能グループ テンプレートに割り当てます。 |
ステップ 2 | LDAP 同期への機能グループ テンプレートの追加 | 予定表対応機能グループ テンプレートを LDAP ディレクトリ同期に割り当て、同期を完了します。 |
この手順は、Microsoft Outlook 予定表統合を機能グループ テンプレートに割り当てる場合に使用します。このテンプレートを使用して、LDAP ディレクトリから同期されたすべてのユーザの Outlook 予定表統合を設定することができます。
(注) | 同期されていない LDAP ディレクトリでは、機能グループ テンプレート設定を追加または編集することしかできません。ディレクトリがすでに同期されている場合は、代わりに、 予定表統合の一括有効化 を使用します。 |
ステップ 1 | Cisco Unified CM Administration から、 を選択します。 |
ステップ 2 | 次のいずれかの手順を実行します。 |
ステップ 3 | [Unified CM IM and Presence でのユーザの有効化(Enable User for Unified CM IM and Presence)] チェックボックスをオンにします。 |
ステップ 4 | [プレゼンスに会議情報を含める(Include meeting information in Presence)] チェックボックスをオンにします。 |
ステップ 5 | [機能グループ テンプレート(Feature Group Template)] 設定ウィンドウの残りのフィールドに入力します。フィールドとその設定を含むヘルプは、オンライン ヘルプを参照してください。 |
ステップ 6 | [保存(Save)] をクリックします。 |
この手順は、LDAP ディレクトリ同期に作成したばかりの予定表対応機能グループ テンプレートを割り当てる場合に使用します。これにより、LDAP ディレクトリから同期されたすべてのユーザの Outlook 予定表統合を有効にすることができます。
(注) | 機能グループ テンプレートは、まだ同期されていない LDAP ディレクトリにしか追加することができません。ディレクトリがすでに同期されている場合は、代わりに、 予定表統合の一括有効化 を使用します。 |
ステップ 1 | Cisco Unified CM Administration から、 を選択します。 |
ステップ 2 | [検索(Find)] をクリックし、既存の LDAP ディレクトリを選択します。 |
ステップ 3 | [機能グループ テンプレート(Feature Group Template)] ドロップ ダウン メニューから、以前のタスクで作成した予定表対応機能グループ テンプレートを選択します。 |
ステップ 4 | [LDAP ディレクトリ(LDAP Directory)] ウィンドウの残りのフィールドを設定します。フィールドとその設定を含むヘルプは、オンライン ヘルプを参照してください。 |
ステップ 5 | [保存(Save)] をクリックします。 |
ステップ 6 | [完全同期を今すぐ実施(Perform Full Sync Now)] をクリックします。 |
一括管理を使用して、1 回の操作で複数のユーザの予定表統合を有効にします。
ステップ 1 | Cisco Unified Communications Manager ノードで、[Cisco Unified CM Administration] ユーザ インターフェイスにログインします。 | ||
ステップ 2 | 予定表の統合は、次のウィンドウから一括して有効にできます。
| ||
ステップ 3 | 予定表統合を有効にするすべてのエンドユーザに対して、次のエンドユーザ設定オプションがオンになっていることを確認します。 | ||
ステップ 4 | csv ファイルから更新する場合は、該当するユーザ領域で、ファイル名を選択します。
| ||
ステップ 5 | [今すぐ実行(Run Immediately)] または [後から実行(Run Later)] をクリックします。 | ||
ステップ 6 | [送信(Submit)] をクリックします。 |
この手順は、IM and Presence サービスのユーザの予定表統合を有効にする場合に使用します。
ステップ 1 | Cisco Unified CM Administration のユーザ インターフェイスにログインします。 |
ステップ 2 | の順に選択します。 |
ステップ 3 | [検索(Find)] をクリックしてエンド ユーザを選択します。 |
ステップ 4 | [Unified CM IM and Presence でのユーザの有効化(Enable User for Unified CM IM and Presence)] チェックボックスをオンにします。 |
ステップ 5 | [プレゼンスに会議情報を含める(Include meeting information in Presence)] チェックボックスをオンにします。 |
ステップ 6 | [保存(Save)] をクリックします。 |