この製品のマニュアルセットは、偏向のない言語を使用するように配慮されています。このマニュアルセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザーインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブランゲージに対する取り組みの詳細は、こちらをご覧ください。
このドキュメントは、米国シスコ発行ドキュメントの参考和訳です。リンク情報につきましては、日本語版掲載時点で、英語版にアップデートがあり、リンク先のページが移動/変更されている場合がありますことをご了承ください。あくまでも参考和訳となりますので、正式な内容については米国サイトのドキュメントを参照ください。
この章は、次の項で構成されています。
サンプル Linux 設定テンプレート ファイル
Linux オペレーティング システム イメージに必要な Kickstart 設定テンプレート ファイル(ks.cfg)の例を以下に示します。
#platform=x86, AMD64, or Intel EM64T # System authorization information auth --useshadow --enablemd5 # System bootloader configuration bootloader --append="rhgb quiet" --location=mbr --driveorder=sda # Partition clearing information clearpart --linux --initlabel # Use text-based install text # Firewall configuration firewall –-disabled # Run the Setup Agent on first boot firstboot -–disable # System keyboard keyboard us # System language lang en_US # Installation logging level logging --level=info # Provide url/location of image over http. url --url=http://$PXE_NATIVE_WEBSERVER/image_name #Reboot after installation reboot # Network information network --bootproto=static --device=eth0 --ip=$PXE_IP --netmask=$PXE_NETMASK --gateway=$PXE_GATEWAY --hostname=$PXE_NAME --onboot=on #Root password rootpw $PXE_PASSWD # SELinux configuration selinux --disabled # System timezone timezone --utc America/New_York # Install OS instead of upgrade install # Disk partitioning information part / --fstype="ext3" --size=8000 #Install required packages %packages --nobase wget %post wget http://$PXE_WEBSERVER/$PXEID/notify.html
Linux オペレーティング システム イメージに必要な Kickstart 設定テンプレート ファイル(ks-uefi.cfg)の例を以下に示します。
auth --useshadow --enablemd5 bootloader --append="rhgb quiet" --location=mbr --driveorder=sda clearpart --all --initlabel zerombr ignoredisk --only-use=sda text firewall --disabled firstboot --disable keyboard us lang en_US logging --level=info url --url=http://$PXE_NATIVE_WEBSERVER/IMAGECATALOGNAME reboot $PXE_DHCP_IP_TYPE network --bootproto=dhcp --device=eth0 --hostname=$PXE_NAME --onboot=on $PXE_STATIC_IP_TYPE network --bootproto=static --device=eth0 --ip=$PXE_IP --netmask=$PXE_NETMASK --gateway=$PXE_GATEWAY --vlanid=$PXE_MGMTVLAN --hostname=$PXE_NAME --onboot=on rootpw $PXE_PASSWD selinux --disabled timezone --isUtc $PXE_TIMEZONE install part /boot/efi --fstype=efi --grow --maxsize=200 --size=50 part /boot --fstype=ext3 --size=500 part swap --fstype="swap" --size=1024 part pv.01 --size=10240 volgroup vg0 pv.01 logvol /home --vgname=vg0 --size=500 --name=home logvol / --vgname=vg0 --grow --size=1 --name=root %packages --nobase wget %end %post ## Notifying back to Cisco UCS Director once the blade is up ## wget http://$PXE_WEBSERVER/$PXEID/notify.html %end
Linux オペレーティング システム イメージに必要な PXE 設定テンプレート ファイル(pxe.cfg)の例を以下に示します。
default linux label linux kernel vmlinuz append initrd=initrd.img ramdisk_size=9216 noapic acpi=off ip=dhcp ks=$PXE_KS_URL prompt 0 timeout 0
Linux オペレーティング システム イメージに必要な iPXE 設定テンプレート ファイル(ipxe.cfg)の例を以下に示します。
default linux label linux kernel http://$PXE_NATIVE_WEBSERVER/$PXE_OS/isolinux/vmlinuz append initrd=http://$PXE_NATIVE_WEBSERVER/$PXE_OS/isolinux/initrd.img ramdisk_size=9216 noapic acpi=off ip=dhcp ks=$PXE_KS_URL ksdevice=eth0 inst.repo=http://$PXE_NATIVE_WEBSERVER/$PXE_OS net.ifnames=0 biosdevname=0 prompt 0 timeout 0
サンプル VMware vSphere ESXi 設定テンプレート ファイル
VMware vSphere ESXi オペレーティング システム イメージに必要な Kickstart 設定テンプレート ファイル(ks.cfg)の例を以下に示します。
vmaccepteula #Set passsword for ESXi server, "$PXE_PASSWD" will be filled in by UCSD rootpw $PXE_PASSWD #For Local boot, uncomment the following line #install --firstdisk --overwritevmfs #For SAN boot, uncomment the following line install --firstdisk=remote --overwritevmfs #Configures the mangement vmknic interface for the ESXi host. All items starting with "$" are variables that will be replaced by UCSD during the PXE boot process. network --bootproto=static --ip=$PXE_IP --netmask=$PXE_NETMASK --gateway=$PXE_GATEWAY --vlanid=$PXE_MGMTVLAN --nameserver=$PXE_NS --hostname=$PXE_NAME %pre --interpreter=busybox hwclock -d %LIVE_VAR_DATE_1% -t %LIVE_VAR_TIME_UTC_1% date -s %LIVE_VAR_DATE_TIME_UTC_1% cd /tmp wget http://$PXE_WEBSERVER/$PXEID/web/track/log1 %firstboot --interpreter=busybox cd /tmp wget http://$PXE_WEBSERVER_MGMT_VLAN_IP/$PXEID/web/track/log3 wget http://$PXE_WEBSERVER_MGMT_VLAN_IP/$PXEID/web/track/log4 #Enable & start remote ESXi Shell (SSH) vim-cmd hostsvc/enable_ssh vim-cmd hostsvc/start_ssh #Enable & start ESXi Shell (TSM) vim-cmd hostsvc/enable_esx_shell vim-cmd hostsvc/start_esx_shell wget http://$PXE_WEBSERVER_MGMT_VLAN_IP/$PXEID/web/track/log5 %post --interpreter=busybox --ignorefailure=true cd /tmp localcli network firewall set --default-action true localcli network firewall set --enabled false wget http://$PXE_WEBSERVER_MGMT_VLAN_IP/$PXEID/web/track/log2 wget http://$PXE_WEBSERVER_MGMT_VLAN_IP/$PXEID/notify.html -O /tmp/notify.html localcli network firewall set --default-action false localcli network firewall set --enabled true #Power down the ESXi server after installation poweroff
VMware vSphere ESXi オペレーティング システム イメージに必要な PXE 設定テンプレート ファイル(pxe.cfg)の例を以下に示します。
default image_name/menu.c32 menu title PXE Boot Home timeout 70 label image_name menu label Install VMware image_name kernel image_name/mboot.c32 append -c /web/ks-repository/$PXE_ID/boot.cfg +++ IPAPPEND 1
VMware vSphere ESXi オペレーティング システム イメージに必要な iPXE 設定テンプレート ファイル(ipxe.cfg)の例を以下に示します。
default 1 timeout 100 prompt 1 label 1 KERNEL ipxe.lkrn Append dhcp && chain http://$PXE_NATIVE_WEBSERVER/$PXE_WINDOWS_OS_REPOSITORY_LINK/boot.ipxe
Windows に必要な iPXE UEFI 設定テンプレート ファイル(ipxe-uefi.cfg)の例を以下に示します。
#!ipxe kernel ../wimboot initrd ../Boot/BCD BCD initrd ../Boot/boot.sdi boot.sdi initrd ../Boot/WinPE.wim WinPE.wim boot
Cisco UCS Director Bare Metal Agent で使用される Windows Server 2008 R2 OS イメージのセットアップに使用可能な AUTOUNATTEND.XML という名前の Windows 応答ファイルの例を以下に示します。
<unattend> <servicing> <package action="configure"> <assemblyIdentity name="Microsoft-Windows-Foundation-Package" version="6.1.7600.16385" processorArchitecture="amd64" publicKeyToken="xxxf3856ad364xxx" language=""/> <selection name="IIS-WebServerRole" state="false"/> <selection name="IIS-WebServer" state="false"/> <selection name="Microsoft-Hyper-V" state="true"/> <selection name="Microsoft-Hyper-V-Management-Clients" state="true"/> <selection name="Microsoft-Hyper-V-Management-Clients" state="true"/> <selection name="MultipathIo" state="true"/> <selection name="TelnetClient" state="true"/> </package> </servicing> <settings pass="windowsPE"> <component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="xxxf3856ad364xxx" language="neutral" versionScope="nonSxS"> <ComplianceCheck> <DisplayReport>OnError</DisplayReport> </ComplianceCheck> <Display> <VerticalResolution>600</VerticalResolution> <RefreshRate>60</RefreshRate> <HorizontalResolution>800</HorizontalResolution> <ColorDepth>32</ColorDepth> </Display> <EnableFirewall>false</EnableFirewall> <UserData> <ProductKey> <WillShowUI>Never</WillShowUI> <Key>XXXXX-XXXXX-KQT8W-PMXWJ-XXXXX</Key> </ProductKey> <AcceptEula>true</AcceptEula> <FullName>Cisco</FullName> <Organization>CiscoUCSD</Organization> </UserData> <DiskConfiguration> <WillShowUI>OnError</WillShowUI> <Disk wcm:action="add"> <CreatePartitions> <CreatePartition wcm:action="add"> <Order>1</Order> <Type>Primary</Type> <Size>40000</Size> </CreatePartition> </CreatePartitions> <DiskID>0</DiskID> <WillWipeDisk>true</WillWipeDisk> <ModifyPartitions> <ModifyPartition wcm:action="add"> <Active>true</Active> <Extend>false</Extend> <Format>NTFS</Format> <Label>OS</Label> <Letter>C</Letter> <Order>1</Order> <PartitionID>1</PartitionID> </ModifyPartition> </ModifyPartitions> </Disk> </DiskConfiguration> <ImageInstall> <OSImage> <InstallTo> <DiskID>0</DiskID> <PartitionID>1</PartitionID> </InstallTo> <WillShowUI>Never</WillShowUI> <InstallFrom> <MetaData wcm:action="add"> <Key>/IMAGE/NAME</Key> <Value>Windows Server 2008 R2 SERVERDATACENTER</Value> </MetaData> <Path>\\000.00.90.31\bits\sources\install.wim</Path> </InstallFrom> </OSImage> </ImageInstall> </component> <component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="nnnf3856ad364nnn" language="neutral" versionScope="nonSxS"> <SetupUILanguage> <UILanguage>en-US</UILanguage> </SetupUILanguage> <UserLocale>en-US</UserLocale> <UILanguage>en-US</UILanguage> <SystemLocale>en-US</SystemLocale> </component> </settings> <settings pass="specialize"> <component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="nnnf3856ad364nnn" language="neutral" versionScope="nonSxS"> <SystemLocale>en-US</SystemLocale> <UILanguage>en-US</UILanguage> <UILanguageFallback>en-US</UILanguageFallback> <UserLocale>en-US</UserLocale> </component> <component name="Microsoft-Windows-TerminalServices-LocalSessionManager" processorArchitecture="amd64" publicKeyToken="nnnf3856ad364nnn" language="neutral" versionScope="nonSxS"> <fDenyTSConnections>false</fDenyTSConnections> </component> <component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364nnn" language="neutral" versionScope="nonSxS"> <RunSynchronous> <RunSynchronousCommand wcm:action="add"> <Description>Disable IPv6</Description> <Path>reg add HKLM\SYSTEM\CurrentControlSet\Services\tcpip6\Parameters /v DisabledComponents /t REG_DWORD /d 255 /f</Path> <Order>1</Order> </RunSynchronousCommand> <RunSynchronousCommand wcm:action="add"> <Description>Disable Shutdown Tracker</Description> <Path>reg add "HKLM\SOFTWARE\Policies\Microsoft\Windows NT\Reliability" /v ShutdownReasonOn /t REG_DWORD /d 0 /f</Path> <Order>2</Order> </RunSynchronousCommand> </RunSynchronous> </component> <component name="Networking-MPSSVC-Svc" processorArchitecture="amd64" publicKeyToken="nnnf3856ad364nnn" language="neutral" versionScope="nonSxS"> <DomainProfile_EnableFirewall>false</DomainProfile_EnableFirewall> <PrivateProfile_EnableFirewall>false</PrivateProfile_EnableFirewall> <PublicProfile_EnableFirewall>false</PublicProfile_EnableFirewall> </component> <component name="Microsoft-Windows-ServerManager-SvrMgrNc" processorArchitecture="amd64" publicKeyToken="nnnf3856ad364nnn" language="neutral" versionScope="nonSxS"> <DoNotOpenServerManagerAtLogon>true</DoNotOpenServerManagerAtLogon> </component> <component name="Microsoft-Windows-OutOfBoxExperience" processorArchitecture="amd64" publicKeyToken="nnnf3856ad364nnn" language="neutral" versionScope="nonSxS"> <DoNotOpenInitialConfigurationTasksAtLogon>true</DoNotOpenInitialConfigurationTasksAtLogon> </component> <component name="Microsoft-Windows-powercpl" processorArchitecture="amd64" publicKeyToken="nnnf3856ad364nnn" language="neutral" versionScope="nonSxS"> <PreferredPlan>8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c</PreferredPlan> </component> <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="nnnf3856ad364nnn" language="neutral" versionScope="nonSxS"> <ComputerName>*</ComputerName> <ProductKey>XXXXX-XXXXX-KQT8W-PMXWJ-XXXXX</ProductKey> </component> </settings> <settings pass="oobeSystem"> <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="nnnf3856ad364nnn" language="neutral" versionScope="nonSxS"> <Display> <ColorDepth>32</ColorDepth> <HorizontalResolution>800</HorizontalResolution> <VerticalResolution>600</VerticalResolution> <RefreshRate>60</RefreshRate> </Display> <OOBE> <HideEULAPage>true</HideEULAPage> <HideWirelessSetupInOOBE>true</HideWirelessSetupInOOBE> <NetworkLocation>Work</NetworkLocation> <ProtectYourPC>3</ProtectYourPC> </OOBE> <VisualEffects> <FontSmoothing>ClearType</FontSmoothing> </VisualEffects> <WindowsFeatures> <ShowInternetExplorer>true</ShowInternetExplorer> </WindowsFeatures> <TimeZone>Pacific Standard Time</TimeZone> <RegisteredOrganization/> <ShowWindowsLive>false</ShowWindowsLive> <UserAccounts> <AdministratorPassword> <Value>987654321abc???=</Value> <PlainText>false</PlainText> </AdministratorPassword> </UserAccounts> <AutoLogon> <Password> <Value>123456abc???</Value> <PlainText>false</PlainText> </Password> <Enabled>true</Enabled> <LogonCount>1</LogonCount> <Username>Administrator</Username> </AutoLogon> <FirstLogonCommands> <SynchronousCommand wcm:action="add"> <CommandLine>cmd /c winrm quickconfig -quiet -transport:HTTP</CommandLine> <Description>Enable WinRS over HTTP to communicate with CPA</Description> <Order>1</Order> <RequiresUserInput>false</RequiresUserInput> </SynchronousCommand> <SynchronousCommand wcm:action="add"> <CommandLine>cmd /c winrm set winrm/config/client @{TrustedHosts="*"}</CommandLine> <Description>Adding trusted hosts value for winrm client</Description> <Order>2</Order> <RequiresUserInput>false</RequiresUserInput> </SynchronousCommand> <SynchronousCommand wcm:action="add"> <CommandLine>cmd /c net use R: \\000.00.90.31\bits /user:smbuser cisco123</CommandLine> <Description>Mapping the share to save the notification file</Description> <Order>3</Order> <RequiresUserInput>false</RequiresUserInput> </SynchronousCommand> <SynchronousCommand wcm:action="add"> <CommandLine>cmd /c ipconfig /all | findstr "Physical" >> R:\notifications\completed.html</CommandLine> <Description>Writing the completed notification log with MAC address at Share mapped in previous step</Description> <Order>4</Order> <RequiresUserInput>false</RequiresUserInput> </SynchronousCommand> <SynchronousCommand wcm:action="add"> <CommandLine>cmd /c R:\notifications\completed.bat</CommandLine> <Description>executing powershell batch file like as wget</Description> <Order>5</Order> <RequiresUserInput>false</RequiresUserInput> </SynchronousCommand> </FirstLogonCommands> </component> </settings> <settings pass="offlineServicing"> <component name="Microsoft-Windows-LUA-Settings" processorArchitecture="amd64" publicKeyToken="nnnf3856ad364nnn" language="neutral" versionScope="nonSxS"> <EnableLUA>false</EnableLUA> </component> </settings> <cpi:offlineImage cpi:source="wim:D:/win2k8r2x64sp1/sources/install.wim#Windows Server 2008 R2 SERVERDATACENTER"/> </unattend>