VMware vCenter Server の管理
VMware vCenter Server の追加、削除、編集、同期、および一括インポートを行うことができ、さらに、データセンター、クラスタ、ホスト、および仮想マシン(VM)のようなコンピューティング リソースの完全なインベントリを表示することもできます。
VMware vCenter Server の追加
VMware vCenter Server を管理するために、手動でそのサーバを追加するには、次の手順を実行します。
はじめる前に
vCenter サーバのインベントリ情報を収集するには、データセンター ハイパーバイザ ライセンスをインストールする必要があります。このライセンスを追加する方法については、『Cisco Prime Infrastructure Admin Guide』ガイドの「Licenses and Software Updates」の章を参照してください。
手順
ステップ 1 |
を選択します。 |
||
ステップ 2 |
[コンピューティングリソース(Compute Resources)] ペインから、[ディスカバリソース(Discovery Sources)] をクリックします。 |
||
ステップ 3 |
[デバイスの追加(Add Device)] ドロップダウンリストから、[デバイスの追加(Add Device)] を選択します。 |
||
ステップ 4 |
[ディスカバリ ソースの追加(Add Discovery Source)] ダイアログボックスに、次のパラメータを指定します。
|
||
ステップ 5 |
(任意)vCenter サーバを追加する前に、[クレデンシャルの確認(Verify Credentials)] をクリックして、入力したクレデンシャルが有効であることを確認します。 |
||
ステップ 6 |
[追加(Add)] をクリックします。 |
||
ステップ 7 |
[ディスカバリ ソース(Discovery Sources)] ページから、追加したばかりの vCenter サーバを検索し、その値を [仮想インベントリ収集ステータス(Virtual Inventory Collection Status)] 列に表示します。 [ライセンスなし(No License)] が表示された場合は、データ センター ハイパーバイザ ライセンスをインストールする必要があります。サーバのインベントリ情報を収集するには、このライセンスが必要です。 |
vCenter をインポートするための CSV ファイルの要件
CSV ファイルを使用して VMware vCenter Server を別のソースから Cisco Prime Infrastructure にインポートするには、次の手順を実行してサンプル テンプレートをダウンロードします。
-
を選択します。
-
[コンピューティングリソース(Compute Resources)] ペインから、[ディスカバリソース(Discovery Sources)] をクリックします。
-
[デバイスの追加(Add Device)] ドロップダウンリストから、[一括インポート(Bulk Import)] を選択します。
[一括インポート(Bulk Import)] ダイアログボックスが開きます。
-
一括の仮想ディスカバリのサンプル テンプレートをダウンロードするには、[ここ(here)] リンクをクリックします。
Cisco Prime Infrastructure で完全なインベントリ収集を有効にするには、ディスカバリ ソースの CSV ファイルに次のパラメータの値を指定する必要があります。
-
IPアドレス/ホスト名
-
[パスワード(Password)]
-
ポート番号
-
[ユーザ名(Username)]
-
プロトコル