||Verify that you can ping the
Mobility Services Engine.
> Mobility Services Engines to display the Mobility Services
||From the Select a command
drop-down list, choose Add
Engine, and click
Name text box, enter a name for the MSE.
||In the IP Address text box,
enter the IP address of the MSE.
||(Optional) In the
Name text box, enter the name of the MSE administrator.
text boxes, enter the username and password for the MSE.
This refers to the Prime
Infrastructure communication username and password created during the setup
If you have not specified the
username and password during the setup process, use the defaults.
The default username and
password are both
If you changed the username
and password during the automatic installation script, enter those values here.
If you did not change the default passwords, we recommend that you rerun the
automatic installation script and change the username and password.
HTTPS check box to allow
communication between the MSE and third-party applications. By default, the
Prime Infrastructure uses HTTPSs to communicate with the MSE.
Delete synchronized service
assignments check box if you want to permanently remove all service
assignments from the MSE.
This option is applicable for
network designs, wired switches, Cisco WLCs, and event definitions. The
existing location history data is retained, however, you must use manual
service assignments to perform any future location calculations.
Next. The Prime
Infrastructure automatically synchronizes the selected elements with the MSE.
After the synchronization,
the MSE License Summary page appears. You can use the MSE License Summary page
to install a license, add a license, remove a license, install an activation
license, and install service license. The Select Mobility Service page appears.
||To enable a service on the
Mobility Services Engine, select the check box next to the service. Services
include Context-Aware Service and wIPS.
You can choose CAS to track
clients, rogues, interferers, wired clients, and tags.
Tag Engine to track tags.
After adding a new MSE, you
can synchronize network designs (campus, building, and outdoor maps), Cisco
WLCs, switches (Catalyst Series 3000 only), and event groups on the local MSE
using the Prime Infrastructure. You can perform this synchronization
immediately after adding a new MSE or at a later time. To synchronize the local
and the Prime Infrastructure databases, see
Synchronizing Mobility Services Engines.