Cisco Embedded Wireless Controller on Catalyst Access Points Command Reference for Cisco IOS XE Cupertino 17.9.x

show aaa dead-criteria radius

To verify the dead-server-detection information for a RADIUS server, use the show aaa dead-criteria radius command.

show aaa dead-criteria radius ipaddr auth-port authport acct-port acctport

Syntax Description


`ipaddr`	IP address.
`authport`	Authentication port.
`acctport`	Accounting port.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced in a release earlier than Cisco IOS XE Gibraltar 16.10.1.

Usage Guidelines

The show aaa dead-criteria radius ipaddr command displays output only if default ports are used. For non-default ports, use the show aaa dead-criteria radius ipaddr auth-port authport acct-port acctport command.

Examples

The following example shows how to see the dead-server-detection information for a RADIUS server with non-default authorization and accounting ports:

Device# show aaa dead-criteria radius 4.4.4.4 auth-port 4444 acct-port 3333

RADIUS: No server group specified. Using radius
RADIUS Server Dead Criteria:
=============================
Server Details:
Address : 4.4.4.4
Auth Port : 4444
Acct Port : 3333
Server Group : radius
Dead Criteria Details:
Configured Retransmits : 3
Configured Timeout : 5
Estimated Outstanding Access Transactions: 0
Estimated Outstanding Accounting Transactions: 0
Dead Detect Time : 10s
Computed Retransmit Tries: 10
Statistics Gathered Since Last Successful Transaction
=====================================================
Max Computed Outstanding Transactions: 0
Max Computed Dead Detect Time: 0s
Max Computed Retransmits : 0

The following example shows how to see the dead-server-detection information for a RADIUS server using default ports:

Device# show aaa dead-criteria radius 9.3.13.37

RADIUS: No server group specified. Using radius
RADIUS Server Dead Criteria:
=============================
Server Details:
Address : 9.3.13.37
Auth Port : 1812
Acct Port : 1813
Server Group : radius
Dead Criteria Details:
Configured Retransmits : 3
Configured Timeout : 30
Estimated Outstanding Access Transactions: 1
Estimated Outstanding Accounting Transactions: 0
Dead Detect Time : 10s
Computed Retransmit Tries: 10
Statistics Gathered Since Last Successful Transaction
=====================================================
Max Computed Outstanding Transactions: 4
Max Computed Dead Detect Time: 48s
Max Computed Retransmits : 30

show access-list

To display access control lists (ACLs) configured on the device, use the show access-lists command in privileged EXEC mode.

show access-lists [name | number | hardware counters | ipc]

Syntax Description


`number`	(Optional) ACL number. The range is 1 to 2799.
`name`	(Optional) Name of the ACL.
hardware counters	(Optional) Displays the access list hardware counters.
ipc	(Optional) Display Interprocess Communication (IPC) protocol access-list configuration download information

Command Default

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.11.1	This command was introduced.

Usage Guidelines

Though visible in the command-line help strings, the rate-limit keyword is not supported

The device supports only IP standard and extended access lists. Therefore, the allowed numbers are only 1 to 199 and 1300 to 2799.

This command also displays the MAC ACLs that are configured.

Examples

This is an example of output from the show access-lists command:

Device# show access-lists

Extended IP access list 103
    10 permit ip any any dscp af11
Extended IP access list ssm-range
    10 deny ip any 232.0.0.0 0.255.255.255
    20 permit ip any any
Extended MAC access list mac1

This is an example of output from the show access-lists hardware counters command:

Device# show access-lists hardware counters
 L3 ACL INPUT Statistics
     All  Drop:                     frame count: 0
     All  Bridge Only:              frame count: 0
     All  Forwarding To CPU:        frame count: 294674
     All  Forwarded:                frame count: 2577677
     All  Drop And Log:             frame count: 0
     All  Bridge Only And Log:      frame count: 0
     All  Forwarded And Log:        frame count: 0
     All  IPv6 Drop:                frame count: 0
     All  IPv6 Bridge Only:         frame count: 0
     All  IPv6 Forwarding To CPU:   frame count: 0
     All  IPv6 Forwarded:           frame count: 102
     All  IPv6 Drop And Log:        frame count: 0
     All  IPv6 Bridge Only And Log: frame count: 0
     All  IPv6 Forwarded And Log:   frame count: 0

 L3 ACL OUTPUT Statistics
     All  Drop:                     frame count: 0
     All  Bridge Only:              frame count: 0
     All  Forwarding To CPU:        frame count: 0
     All  Forwarded:                frame count: 266050
     All  Drop And Log:             frame count: 0
     All  Bridge Only And Log:      frame count: 0
     All  Forwarded And Log:        frame count: 0
     All  IPv6 Drop:                frame count: 0
     All  IPv6 Bridge Only:         frame count: 0
     All  IPv6 Forwarding To CPU:   frame count: 0
     All  IPv6 Forwarded:           frame count: 0
     All  IPv6 Drop And Log:        frame count: 0
     All  IPv6 Bridge Only And Log: frame count: 0
     All  IPv6 Forwarded And Log:   frame count: 0

show ap auth-list

To see the access point authorization list, use the show ap auth-list command.

show ap auth-list [ chassis {chassis-number | active | standby} R0]

Syntax Description


`chassis-number`	Chassis number as either 1 or 2.
active R0	Active instance in Route-processor slot 0.
standby R0	Standby instance in Route-processor slot 0.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced in a release earlier than Cisco IOS XE Gibraltar 16.10.1.

Examples

The following example shows how to see the access point authorization list:

Device# show ap auth-list

show ap auth-list ap-cert-policy

To verify if the APs have been authorized by the AP certificate policy, use the show ap auth-list ap-cert-policy

show ap auth-list ap-cert-policy

Syntax Description


This command has no arguments.

Command Default

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Bengaluru 17.5.1	This command was introduced.

Examples

The following example shows how to verify if the APs have been authorized by the AP certificate policy:

Device# show ap auth-list ap-cert-policy

show ap auto-rf

To display the auto-RF settings for a Cisco lightweight access point, use the show ap auto-rf command.

show ap auto-rf dot11{ 24ghz | 5ghz | dual-band} cisco_ap

Syntax Description


24ghz	Specifies the 802.11b AP.
5ghz	Specifies the 802.11a AP.
dual-band	Specifies dual bands.

Command Default

None

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.1	This command was introduced in a release earlier than Cisco IOS XE Gibraltar 16.12.1.

Usage Guidelines

The show ap auto-rf command output will not display neighbor AP names.

Examples

The following example shows how to display auto-RF information for an access point:

Device# show ap auto-rf dot11 24ghz AP1

###################################################################

Number of Slots                                   : 3
AP Name                                           : APA023.9FD8.EA22
MAC Address                                       : 40ce.24bf.8ca0
Ethernet MAC Address                              : a023.9fd8.ea22
  Slot ID                                         : 0
  Radio Type                                      : 802.11n - 2.4 GHz
  Current TX/RX Band                              : 2.4Ghz band
  Subband Type                                    : All
  Noise Information
    Noise Profile                                 : Passed
    Channel   1                                   :  -91 dBm
    Channel   2                                   :  -67 dBm
    Channel   3                                   :  -54 dBm
    Channel   4                                   :  -55 dBm
    Channel   5                                   :  -71 dBm
    Channel   6                                   :  -85 dBm
    Channel   7                                   :  -50 dBm
    Channel   8                                   :  -54 dBm
    Channel   9                                   :  -77 dBm
    Channel  10                                   :  -88 dBm
    Channel  11                                   :  -65 dBm
  Interference Information
    Interference Profile                          : Failed
    Channel   1                                   :  -47 dBm @ 21% busy
    Channel   2                                   :  -45 dBm @  2% busy
    Channel   3                                   : -128 dBm @  0% busy
    Channel   4                                   : -128 dBm @  0% busy
    Channel   5                                   :  -48 dBm @  2% busy
    Channel   6                                   :  -45 dBm @  2% busy
    Channel   7                                   :  -42 dBm @  3% busy
    Channel   8                                   : -128 dBm @  0% busy
    Channel   9                                   : -128 dBm @  0% busy
    Channel  10                                   :  -39 dBm @  3% busy
    Channel  11                                   :  -46 dBm @  3% busy
    Rogue Histogram (20)
      Channel   1                                 : 36
      Channel   2                                 :  0
      Channel   3                                 :  0
      Channel   4                                 :  1
      Channel   5                                 :  0
      Channel   6                                 : 11
      Channel   7                                 :  0
      Channel   8                                 :  1
      Channel   9                                 :  3
      Channel  10                                 :  0
      Channel  11                                 : 14
  Load Information
    Load Profile                                : Failed
    Receive Utilization                         : 0%
    Transmit Utilization                        : 0%
    Channel Utilization                         : 98%
    Attached Clients                            : 0 clients
  Coverage Information
    Coverage Profile                            : Passed
    Failed Clients                              : 0 clients
  Client Signal Strengths
    RSSI -100 dBm                               : 0 clients
    RSSI  -92 dBm                               : 0 clients
    RSSI  -84 dBm                               : 0 clients
    RSSI  -76 dBm                               : 0 clients
    RSSI  -68 dBm                               : 0 clients
    RSSI  -60 dBm                               : 0 clients
    RSSI  -52 dBm                               : 0 clients
  Client Signal to Noise Ratios
    SNR    0 dB                                 : 0 clients
    SNR    5 dB                                 : 0 clients
    SNR   10 dB                                 : 0 clients
    SNR   15 dB                                 : 0 clients
    SNR   20 dB                                 : 0 clients
    SNR   25 dB                                 : 0 clients
    SNR   30 dB                                 : 0 clients
    SNR   35 dB                                 : 0 clients
    SNR   40 dB                                 : 0 clients
    SNR   45 dB                                 : 0 clients
  Nearby APs
    AP d0ec.3572.b9a0 slot 0                    :  -23 dBm on ( 11, 20 MHz) (181.22.0.22)
    AP 0c75.bdb3.9000 slot 0                    :  -28 dBm on ( 11, 20 MHz) (181.21.0.21)
    AP a4b2.3980.3740 slot 0                    :  -28 dBm on (  1, 20 MHz) (181.21.0.21)
    AP d0ec.3576.8320 slot 0                    :  -33 dBm on ( 11, 20 MHz) (50.1.1.122)
    AP a0f8.49dc.9780 slot 0                    :  -34 dBm on (  1, 20 MHz) (9.9.57.94)
    AP a0f8.49dc.8260 slot 0                    :  -34 dBm on (  6, 20 MHz) (9.9.57.94)
    AP d0ec.3573.7c80 slot 0                    :  -36 dBm on (  6, 20 MHz) (192.185.183.44)
    AP 00b0.e192.9d20 slot 0                    :  -36 dBm on ( 11, 20 MHz) (9.9.42.47)
    AP a4b2.397f.41c0 slot 0                    :  -36 dBm on (  1, 20 MHz) (185.10.0.10)
    AP 2c5a.0fd5.b8c0 slot 0                    :  -36 dBm on (  6, 20 MHz) (9.7.97.51)
    AP a488.7351.4740 slot 0                    :  -36 dBm on ( 11, 20 MHz) (9.7.97.51)
    AP 10b3.d5e9.c8e0 slot 0                    :  -36 dBm on (  1, 20 MHz) (50.1.1.122)
    AP 0c75.bdb3.ab00 slot 0                    :  -37 dBm on (  6, 20 MHz) (185.10.0.10)
    AP 68ca.e451.5120 slot 0                    :  -37 dBm on (  1, 20 MHz) (9.4.155.15)
    AP a0f8.49dc.97a0 slot 0                    :  -37 dBm on ( 11, 20 MHz) (9.9.57.94)
    AP 188b.4501.7940 slot 0                    :  -38 dBm on ( 11, 20 MHz) (9.9.57.94)
    AP 002c.c88a.f8e0 slot 0                    :  -38 dBm on ( 11, 20 MHz) (9.9.50.55)
    AP 7069.5a78.4960 slot 0                    :  -38 dBm on ( 11, 20 MHz) (9.7.97.51)
    AP 3c41.0ea7.0880 slot 0                    :  -39 dBm on ( 11, 20 MHz) (185.10.0.10)
    AP a0f8.49dc.93a0 slot 0                    :  -39 dBm on (  6, 20 MHz) (9.9.57.94)
    AP f4db.e685.7360 slot 0                    :  -39 dBm on (  6, 20 MHz) (50.1.1.122)
    AP 7070.8bb4.4120 slot 0                    :  -40 dBm on ( 11, 20 MHz) (9.9.57.94)
    AP 707d.b93e.39e0 slot 0                    :  -40 dBm on (  1, 20 MHz) (4.4.4.1)
    AP 706d.150c.6860 slot 0                    :  -40 dBm on ( 11, 20 MHz) (50.1.1.122)
  Radar Information
  Channel Assignment Information via DCA
    Current Channel Average Energy                :  -50 dBm
    Previous Channel Average Energy               :  -50 dBm
    Channel Change Count                          : 9
    Last Channel Change Time                      : 02/14/2021 20:54:57
    Recommended Best Channel                      : 1
  RF Parameter Recommendations
    Power Level                                   : 8
    RTS/CTS Threshold                             : 2347
    Fragmentation Threshold                       : 2346
    Antenna Pattern                               : 0
  Persistent Interference Devices
  Class Type                 Channel  DC (%%)  RSSI (dBm)  Last Update Time
  -------------------------  -------  ------   ---------   ----------------
  All third party trademarks are the property of their respective owners.

show ap config

To display configuration settings for all access points that join the device, use the show ap config command.

show ap config {general | slots}

Syntax Description


ethernet	Displays ethernet related information for all Cisco APs.
general	Displays common information for all Cisco APs.
slots	Displays configuration information for all slots of all Cisco APs.

Command Default

None

Command Modes

Any command mode

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.2s	This command was introduced.

Examples

This example shows how to display global syslog server settings:

Device# show ap config general
Cisco AP Name   : APA023.9FAE.E190
=================================================

Cisco AP Identifier                             : 40ce.24f7.50e0
Country Code                                    : US
Regulatory Domain Allowed by Country            : 802.11bg:-A   802.11a:-AB
AP Country Code                                 : US  - United States
AP Regulatory Domain
  Slot 0                                        : -B
  Slot 1                                        : -B
MAC Address                                     : a023.9fae.e190
IP Address Configuration                        : DHCP
IP Address                                      : 9.12.33.244
IP Netmask                                      : 255.255.255.0
Gateway IP Address                              : 9.12.33.1
Fallback IP Address Being Used                  :
Domain                                          :
Name Server                                     :
CAPWAP Path MTU                                 : 1485
Capwap Active Window Size                       : 1
Telnet State                                    : Disabled
SSH State                                       : Disabled
Cisco AP Location                               : default location
Site Tag Name                                   : default-site-tag
RF Tag Name                                     : default-rf-tag
Policy Tag Name                                 : default-policy-tag
AP join Profile                                 : default-ap-profile
Flex Profile                                    : default-flex-profile
Primary Cisco Controller Name                   : ewlc-doc-17.1.1
Primary Cisco Controller IP Address             : 9.12.35.10
Secondary Cisco Controller Name                 : Doc-86
Secondary Cisco Controller IP Address           : 9.12.33.10
Tertiary Cisco Controller Name                  : Cisco-docvwlc-85
Tertiary Cisco Controller IP Address            : 9.12.35.16
Administrative State                            : Enabled
Operation State                                 : Registered
NAT External IP Address                         : 9.12.33.244
AP Certificate type                             : Manufacturer Installed Certificate
AP Mode                                         : Local
AP VLAN tagging state                           : Disabled
AP VLAN tag                                     : 0
.
.
.

show ap config slots

To display configuration settings for all the slots, use the show ap config slots command.

show ap config slots

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Cupertino 17.9.1	This command was introduced.

Examples

The following example displays the configuration settings for all the slots in a Cisco wireless controller:

Device# show ap config slots
 
============================================================
Cisco AP Identifier                             : 40ce.24bf.8ca0
Cisco AP Name                                   : APA023.9FD8.EA22
AP Country Code                                 : IN 
.
.
.

  Zero Wait DFS Parameters
    Zero Wait DFS Capable                       : Yes
    CAC Domain                                  :

show ap crash-file

To display the list of both crash and radio core dump files generated by lightweight access points, use the show ap crash-file command.

show ap crash-filechassis chassis-number <1-2>active standby

Syntax Description


chassis	Displays the chassis details.
`chassis-number`	Specifies the chassis number, either 1 or 2.
active	Specifies an active instance.
standby	Specifies a standby instance.

Command Default

None

Command Modes

Any command mode

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.2s	This command was introduced.

Examples

This example shows how to display the crash file generated by the access point:

Device# show ap crash-file

show ap dot11

To view 802.11a or 802.11b configuration information, use the show ap dot11 command.

show ap dot11 { 24ghz | 5ghz } { channel | coverage | group | load-info | logging | media-stream | monitor | network | profile | summary | txpower | }

Syntax Description


24ghz	Specifies the 2.4-GHz band.
5ghz	Specifies the 5-GHz band.
6ghz	Specifies the 6-GHz band.
channel	Displays the automatic channel assignment configuration and statistics.
coverage	Displays the configuration and statistics for coverage hole detection.
group	Displays 802.11a or 802.11b Cisco radio RF grouping.
load-info	Displays channel utilization and client count information for all Cisco APs.
logging	Displays 802.11a or 802.11b RF event and performance logging.
media-stream	Display 802.11a or 802.11b Media Resource Reservation Control configurations.
monitor	Displays the 802.11a or 802.11b default Cisco radio monitoring.
network	Displays the 802.11a or 802.11b network configuration.
profile	Displays the 802.11a or 802.11b lightweight access point performance profiles.
receiver	Displays the configuration and statistics of the 802.11a or 802.11b receiver.
summary	Displays the 802.11a or 802.11b Cisco lightweight access point name, channel, and transmit level summary.
txpower	Displays the 802.11a or 802.11b automatic transmit power assignment.

Command Default

None

Command Modes

Any command mode

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.2s	This command was introduced.

Examples

This example shows how to display the automatic channel assignment configuration and statistics:

Device# show ap dot11 5ghz channel
Automatic Channel Assignment
  Channel Assignment Mode                    : AUTO
  Channel Update Interval                    : 12 Hours
  Anchor time (Hour of the day)              : 20
  Channel Update Contribution                : SNI.
  Channel Assignment Leader                  : web (9.9.9.2)
  Last Run                                   : 13105 seconds ago
  DCA Sensitivity Level                      : MEDIUM (15 dB)
  DCA 802.11n Channel Width                  : 40 Mhz
  Channel Energy Levels
      Minimum                                : unknown
      Average                                : unknown
      Maximum                                : unknown
  Channel Dwell Times
      Minimum                                : unknown
      Average                                : unknown
      Maximum                                : unknown
  802.11a 5 GHz Auto-RF Channel List
  Allowed Channel List                       : 36,40,44,48,52,56,60,64,149,153,1
57,161
  Unused Channel List                        : 100,104,108,112,116,132,136,140,1
65
  802.11a 4.9 GHz Auto-RF Channel List
  Allowed Channel List                       :
  Unused Channel List                        : 1,2,3,4,5,6,7,8,9,10,11,12,13,14,
15,16,17,18,19,20,21,22,23,24,25,26
  DCA Outdoor AP option                      : Disabled

This example shows how to display the statistics for coverage hole detection:

Device# show ap dot11 5ghz coverage
Coverage Hole Detection
  802.11a Coverage Hole Detection Mode          : Enabled
  802.11a Coverage Voice Packet Count           : 100 packet(s)
  802.11a Coverage Voice Packet Percentage      : 50 %
  802.11a Coverage Voice RSSI Threshold         : -80dBm
  802.11a Coverage Data Packet Count            : 50 packet(s)
  802.11a Coverage Data Packet Percentage       : 50 %
  802.11a Coverage Data RSSI Threshold          : -80dBm
  802.11a Global coverage exception level       : 25
  802.11a Global client minimum exception level   : 3 clients

This example shows how to display Cisco radio RF group settings:

Device# show ap dot11 5ghz group
Radio RF Grouping

  802.11a Group Mode                 : STATIC
  802.11a Group Update Interval      : 600 seconds
  802.11a Group Leader               : web (10.10.10.1)
  802.11a Group Member               : web(10.10.10.1)
                                       nb1(172.13.21.45) (*Unreachable)
  802.11a Last Run                   : 438 seconds ago


  Mobility Agents RF membership information
  ------------------------------------------------------------
  No of 802.11a MA RF-members : 0

This example shows how to display 802.11a RF event and performance logging:

Device# show ap dot11 5ghz logging
RF Event and Performance Logging

  Channel Update Logging              : Off
  Coverage Profile Logging            : Off
  Foreign Profile Logging             : Off
  Load Profile Logging                : Off
  Noise Profile Logging               : Off
  Performance Profile Logging         : Off
  TxPower Update Logging              : Off

This example shows how to display the 802.11a media stream configuration:

Device# show ap dot11 5ghz media-stream
Multicast-direct                 : Disabled
Best Effort                      : Disabled
Video Re-Direct                  : Disabled
Max Allowed Streams Per Radio      : Auto
Max Allowed Streams Per Client     : Auto
Max Video Bandwidth               : 0
Max Voice Bandwidth               : 75
Max Media Bandwidth               : 85
Min PHY Rate (Kbps)               : 6000
Max Retry Percentage              : 80

This example shows how to display the radio monitoring for the 802.11b network:

Device# show ap dot11 5ghz monitor
Default 802.11a AP monitoring

  802.11a Monitor Mode                           : Enabled
  802.11a Monitor Mode for Mesh AP Backhaul      : disabled
  802.11a Monitor Channels                       : Country channels
  802.11a RRM Neighbor Discover Type             : Transparent
  802.11a AP Coverage Interval                   : 180 seconds
  802.11a AP Load Interval                       : 60 seconds
  802.11a AP Noise Interval                      : 180 seconds
  802.11a AP Signal Strength Interval            : 60 seconds

This example shows how to display the global configuration and statistics of an 802.11a profile:

Device# show ap dot11 5ghz profile
Default 802.11a AP performance profiles
802.11a Global Interference threshold.............. 10%
802.11a Global noise threshold..................... -70 dBm
802.11a Global RF utilization threshold............ 80%
802.11a Global throughput threshold................ 1000000 bps
802.11a Global clients threshold................... 12 clients
802.11a Global coverage threshold.................. 12 dB
802.11a Global coverage exception level............ 80%
802.11a Global client minimum exception lev........ 3 clients

This example shows how to display the network configuration of an 802.11a profile:

Device# show ap dot11 5ghz network
802.11a Network : Enabled
11nSupport : Enabled
  802.11a Low Band : Enabled
  802.11a Mid Band : Enabled
  802.11a High Band : Enabled

802.11a Operational Rates
  802.11a 6M : Mandatory
  802.11a 9M : Supported
  802.11a 12M : Mandatory
  802.11a 18M : Supported
  802.11a 24M : Mandatory
  802.11a 36M : Supported
  802.11a 48M : Supported
  802.11a 54M : Supported
802.11n MCS Settings:
  MCS 0 : Supported
  MCS 1 : Supported
  MCS 2 : Supported
  MCS 3 : Supported
  MCS 4 : Supported
  MCS 5 : Supported
  MCS 6 : Supported
  MCS 7 : Supported
  MCS 8 : Supported
  MCS 9 : Supported
  MCS 10 : Supported
  MCS 11 : Supported
  MCS 12 : Supported
  MCS 13 : Supported
  MCS 14 : Supported
  MCS 15 : Supported
  MCS 16 : Supported
  MCS 17 : Supported
  MCS 18 : Supported
  MCS 19 : Supported
  MCS 20 : Supported
  MCS 21 : Supported
  MCS 22 : Supported
  MCS 23 : Supported
802.11n Status:
  A-MPDU Tx:
    Priority 0 : Enabled
    Priority 1 : Disabled
    Priority 2 : Disabled
    Priority 3 : Disabled
    Priority 4 : Enabled
    Priority 5 : Enabled
    Priority 6 : Disabled
    Priority 7 : Disabled
  A-MSDU Tx:
    Priority 0 : Enabled
    Priority 1 : Enabled
    Priority 2 : Enabled
    Priority 3 : Enabled
    Priority 4 : Enabled
    Priority 5 : Enabled
    Priority 6 : Disabled
    Priority 7 : Disabled
  Guard Interval : Any
  Rifs Rx : Enabled
Beacon Interval : 100
CF Pollable mandatory : Disabled
CF Poll Request Mandatory : Disabled
CFP Period : 4
CFP Maximum Duration : 60
Default Channel : 36
Default Tx Power Level : 1
DTPC Status : Enabled
Fragmentation Threshold : 2346
Pico-Cell Status : Disabled
Pico-Cell-V2 Status : Disabled
TI Threshold : 0
Legacy Tx Beamforming setting : Disabled
Traffic Stream Metrics Status : Disabled
Expedited BW Request Status : Disabled
EDCA profile type check : default-wmm
Call Admision Control (CAC) configuration
Voice AC
  Voice AC - Admission control (ACM) : Disabled
  Voice Stream-Size : 84000
  Voice Max-Streams : 2
  Voice Max RF Bandwidth : 75
  Voice Reserved Roaming Bandwidth : 6
  Voice Load-Based CAC mode : Enabled
  Voice tspec inactivity timeout : Enabled
CAC SIP-Voice configuration
  SIP based CAC : Disabled
  SIP call bandwidth : 64
  SIP call bandwith sample-size : 20
Video AC
  Video AC - Admission control (ACM) : Disabled
  Video max RF bandwidth : Infinite
  Video reserved roaming bandwidth : 0

This example shows how to display the global configuration and statistics of an 802.11a profile:

Device# show ap dot11 5ghz receiver
Default 802.11a AP performance profiles
802.11a Global Interference threshold.............. 10%
802.11a Global noise threshold..................... -70 dBm
802.11a Global RF utilization threshold............ 80%
802.11a Global throughput threshold................ 1000000 bps
802.11a Global clients threshold................... 12 clients
802.11a Global coverage threshold.................. 12 dB
802.11a Global coverage exception level............ 80%
802.11a Global client minimum exception lev........ 3 clients

This example shows how to display the global configuration and statistics of an 802.11a profile:

Device# show ap dot11 5ghz service-policy

This example shows how to display a summary of the 802.11b access point settings:

Device# show ap dot11 5ghz summary
AP Name MAC Address       Admin State Operation State Channel TxPower
------- ----------------- ----------- --------------- ------- -------
CJ-1240 00:21:1b:ea:36:60 ENABLED     UP              161     1( )
CJ-1130 00:1f:ca:cf:b6:60 ENABLED     UP              56*     1(*)

This example shows how to display the configuration and statistics of the 802.11a transmit power cost:

Device# show ap dot11 5ghz txpower
Automatic Transmit Power Assignment

Transmit Power Assignment Mode          : AUTO
Transmit Power Update Interval          : 600 seconds
Transmit Power Threshold                : -70 dBm
Transmit Power Neighbor Count           : 3 APs
Min Transmit Power                      : -10 dBm
Max Transmit Power                      : 30 dBm
Transmit Power Update Contribution      : SNI.
Transmit Power Assignment Leader        : web (10.10.10.1)
Last Run                                : 437 seconds ago

This example shows how to display the configuration and statistics of the 802.11a transmit power cost:

Device# show ap dot11 5ghz ccx global
 802.11a Client Beacon Measurements:
     disabled

show ap dot11

To display 802.11 band parameters, use the show ap dot11 command.

show ap dot11 {24ghz | 5ghz} {media-stream rrc}

Syntax Description


media-stream rrc	Displays Media Stream configurations.

Command Default

None

Command Modes

User EXEC command mode or Privileged EXEC command mode

Usage Guidelines

None.

Examples

The following is a sample output of the show ap dot11 24ghz media-stream rrc command.


Device#show ap dot11 24ghz media-stream rrc

Multicast-direct                 : Disabled
Best Effort                      : Disabled
Video Re-Direct                  : Disabled
Max Allowed Streams Per Radio      : Auto
Max Allowed Streams Per Client     : Auto
Max Video Bandwidth               : 0
Max Voice Bandwidth               : 75
Max Media Bandwidth               : 85
Min PHY Rate (Kbps)               : 6000
Max Retry Percentage              : 80

show ap dot11 24ghz

To display the 2.4 GHz RRM parameters, use the show ap dot11 24ghz command.

show ap dot11 24ghz {channel | coverage | group | logging | monitor | profile | summary | txpower}

Syntax Description


ccx	Displays the 802.11b CCX information for all Cisco APs.
channel	Displays the configuration and statistics of the 802.11b channel assignment.
coverage	Displays the configuration and statistics of the 802.11b coverage.
group	Displays the configuration and statistics of the 802.11b grouping.
l2roam	Displays 802.11b l2roam information.
logging	Displays the configuration and statistics of the 802.11b event logging.
monitor	Displays the configuration and statistics of the 802.11b monitoring.
profile	Displays 802.11b profiling information for all Cisco APs.
receiver	Displays the configuration and statistics of the 802.11b receiver.
summary	Displays the configuration and statistics of the 802.11b Cisco APs.
txpower	Displays the configuration and statistics of the 802.11b transmit power control.

Command Default

None.

Command Modes

Global configuration.

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.2s	This command was introduced.

Usage Guidelines

None.

Examples

This example shows how to display configuration and statistics of the 802.11b coverage.

Device#show ap dot11 24ghz coverage

Coverage Hole Detection
  802.11b Coverage Hole Detection Mode             : Enabled
  802.11b Coverage Voice Packet Count              : 100 packet(s)
  802.11b Coverage Voice Packet Percentage         : 50%
  802.11b Coverage Voice RSSI Threshold            : -80 dBm
  802.11b Coverage Data Packet Count               : 50 packet(s)
  802.11b Coverage Data Packet Percentage          : 50%
  802.11b Coverage Data RSSI Threshold             : -80 dBm
  802.11b Global coverage exception level          : 25 %
  802.11b Global client minimum exception level    : 3 clients

show ap dot11 24ghz SI config

To see the spectrum intelligence (SI) configuration details for the 2.4-GHz band, use the show ap dot11 24ghz SI config command.

show ap dot11 24ghz SI config [ chassis {chassis-number | active | standby} R0]

Syntax Description


`chassis-number`	Chassis number as either 1 or 2.
active R0	Active instance of the configuration in Route-processor slot 0.
standby R0	Standby instance of the configuration in Route-processor slot 0.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced in a release earlier than Cisco IOS XE Gibraltar 16.10.1.

Examples

The following example shows how to see the SI configuration details for the 2.4-GHz band:

Device# show ap dot11 24ghz SI config chassis 1 R0

show ap dot11 24ghz SI device type

To see the spectrum intelligence (SI) interferers of different types for the 2.4-GHz band, use the show ap dot11 24ghz SI device type command.

show ap dot11 24ghz SI device type {cont_tx | mw_oven | si_fhss} [ chassis {chassis-number | active | standby} R0]

Syntax Description


cont_tx	SI interferers of type Continuous transmitter for the 2.4-GHz band.
mw_oven	SI interferers of type microwave oven for the 2.4-GHz band.
si_fhss	SI interferers of type Frequency Hopping Spread Spectrum for the 2.4-GHz band.
`chassis-number`	Enter the chassis number as either 1 or 2.
active R0	Active instance of the configuration in Route-processor slot 0.
standby R0	Standby instance of the configuration in Route-processor slot 0.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced in a release earlier than Cisco IOS XE Gibraltar 16.10.1.

Examples

The following example shows how to see the details of SI interferers of type microwave oven in the 2.4-GHz band:

Device# show ap dot11 24ghz SI device type mw_oven chassis 1 R0

show ap dot11 5ghz

To display the 5GHz RRM parameters, use the show ap dot11 5ghz command.

show ap dot11 5ghz {channel | coverage | group | logging | monitor | profile | summary | txpower}

Syntax Description


ccx	Displays the 802.11a CCX information for all Cisco APs.
channel	Displays the configuration and statistics of the 802.11a channel assignment.
coverage	Displays the configuration and statistics of the 802.11a coverage.
group	Displays the configuration and statistics of the 802.11a grouping.
l2roam	Displays 802.11a l2roam information.
logging	Displays the configuration and statistics of the 802.11a event logging.
monitor	Displays the configuration and statistics of the 802.11a monitoring.
profile	Displays 802.11a profiling information for all Cisco APs.
receiver	Displays the configuration and statistics of the 802.11a receiver.
summary	Displays the configuration and statistics of the 802.11a Cisco APs.
txpower	Displays the configuration and statistics of the 802.11a transmit power control.

Command Default

None.

Command Modes

Global configuration.

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.2s	This command was introduced.

Usage Guidelines

None.

Examples

This example shows configuration and statistics of 802.11a channel assignment.

Device#show ap dot11 5ghz channel

Automatic Channel Assignment
  Channel Assignment Mode                    : AUTO
  Channel Update Interval                    : 12 Hours
  Anchor time (Hour of the day)              : 20
  Channel Update Contribution                : SNI..
  Channel Assignment Leader                  : web (9.9.9.2)
  Last Run                                   : 16534 seconds ago
  DCA Sensitivity Level                      : MEDIUM (15 dB)
  DCA 802.11n Channel Width                  : 40 Mhz
  Channel Energy Levels
      Minimum                                : unknown
      Average                                : unknown
      Maximum                                : unknown
  Channel Dwell Times
      Minimum                                : unknown
      Average                                : unknown
      Maximum                                : unknown
  802.11a 5 GHz Auto-RF Channel List
  Allowed Channel List                       : 36,40,44,48,52,56,60,64,149,153,1                                                                                                                     57,161
  Unused Channel List                        : 100,104,108,112,116,132,136,140,1                                                                                                                     65
  802.11a 4.9 GHz Auto-RF Channel List
  Allowed Channel List                       :
  Unused Channel List                        : 1,2,3,4,5,6,7,8,9,10,11,12,13,14,                                                                                                                     15,16,17,18,19,20,21,22,23,24,25,26
  DCA Outdoor AP option                      : Disabled

show ap dot11 24ghz cleanair air-quality

To display the air-quality summary information and air-quality worst information for the 802.11 networks, use the show ap dot11 cleanair command.

show ap dot11 {24ghz | 5ghz | dual-band} cleanair {air-quality | config | device | summary}

Syntax Description


24ghz	Displays the 2.4 GHz band.
5ghz	Displays the 5 GHz band.
dual-band	Displays 802.11 dual-band radios.
cleanair	Displays cleanair configurations.
air-quality	Displays the Cleanair Air-Quality (AQ) data for 2.4GHz band.
device	Displays the CleanAir Interferers of device for 2.4GHz band.
config	Displays CleanAir Configuration for 2.4GHz band.
summary	Displays cleanair configurations for all 802.11a Cisco APs.

Command Default

None

Command Modes

Any command mode

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.2s	This command was introduced.

Examples

This example shows how to display the worst air-quality information for the 5 GHz band:

Device# show ap dot11 5ghz cleanair air-quality worst

AQ = Air Quality
DFS = Dynamic Frequency Selection
AP Name      Channel Avg AQ Min AQ Interferers DFS
------------ ------- ------ ------ ----------- -----
CISCO_AP3500 36      95     70     0           40

This example shows how to display the worst air-quality information for the 2.4 GHz band:

Device# show ap dot11 24ghz cleanair air-quality worst

AQ = Air Quality
DFS = Dynamic Frequency Selection
AP Name      Channel Avg AQ Min AQ Interferers DFS
------------ ------- ------ ------ ----------- -----
CISCO_AP3500 1       83     57     3           5

show ap dot11 24ghz cleanair air-quality

To display the air-quality summary information and air-quality worst information for the 802.11 networks, use the show ap dot11 cleanair air-quality command.

show ap dot11 {24ghz | 5ghz} cleanair air-quality {summary | worst}

Syntax Description


24ghz	Displays the 2.4 GHz band.
5ghz	Displays the 5 GHz band.
summary	Displays a summary of 802.11 radio band air-quality information.
worst	Displays the worst air-quality information for 802.11 networks.

Command Default

None

Command Modes

Any command mode

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.2s	This command was introduced.

Examples

This example shows how to display the worst air-quality information for the 5 GHz band:

Device# show ap dot11 5ghz cleanair air-quality worst

AQ = Air Quality
DFS = Dynamic Frequency Selection
AP Name      Channel Avg AQ Min AQ Interferers DFS
------------ ------- ------ ------ ----------- -----
CISCO_AP3500 36      95     70     0           40

This example shows how to display the worst air-quality information for the 2.4 GHz band:

Device# show ap dot11 24ghz cleanair air-quality worst

AQ = Air Quality
DFS = Dynamic Frequency Selection
AP Name      Channel Avg AQ Min AQ Interferers DFS
------------ ------- ------ ------ ----------- -----
CISCO_AP3500 1       83     57     3           5

show ap dot11 cleanair config

To display the CleanAir configuration for the 802.11 networks, use the show ap dot11 cleanair config command.

show ap dot11 {24ghz | 5ghz} cleanair config

Syntax Description


24ghz	Displays the 2.4 GHz band.
5ghz	Displays the 5 GHz band.

Command Default

None

Command Modes

Any command mode

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.1	This command was introduced.

Examples

This example shows how to display the CleanAir configuration for the 2.4 GHz band:

Device# show ap dot11 24ghz cleanair config
Clean Air Solution............................... : Disabled
Air Quality Settings:
    Air Quality Reporting........................ : Disabled
    Air Quality Reporting Period (min)........... : 15
    Air Quality Alarms........................... : Enabled
    Air Quality Alarm Threshold.................. : 10
Interference Device Settings:
    Interference Device Reporting................ : Enabled
        Bluetooth Link........................... : Enabled
        Microwave Oven........................... : Enabled
        802.11 FH................................ : Enabled
        Bluetooth Discovery...................... : Enabled
        TDD Transmitter.......................... : Enabled
        Jammer................................... : Enabled
        Continuous Transmitter................... : Enabled
        DECT-like Phone.......................... : Enabled
        Video Camera............................. : Enabled
        802.15.4................................. : Enabled
        WiFi Inverted............................ : Enabled
        WiFi Invalid Channel..................... : Enabled
        SuperAG.................................. : Enabled
        Canopy................................... : Enabled
        Microsoft Device......................... : Enabled
        WiMax Mobile............................. : Enabled
        WiMax Fixed.............................. : Enabled
    Interference Device Types Triggering Alarms:
        Bluetooth Link........................... : Disabled
        Microwave Oven........................... : Disabled
        802.11 FH................................ : Disabled
        Bluetooth Discovery...................... : Disabled
        TDD Transmitter.......................... : Disabled
        Jammer................................... : Disabled
        Continuous Transmitter................... : Disabled
        DECT-like Phone.......................... : Disabled
        Video Camera............................. : Disabled
        802.15.4................................. : Disabled
        WiFi Inverted............................ : Enabled
        WiFi Invalid Channel..................... : Enabled
        SuperAG.................................. : Disabled
        Canopy................................... : Disabled
        Microsoft Device......................... : Disabled
        WiMax Mobile............................. : Disabled
        WiMax Fixed.............................. : Disabled
    Interference Device Alarms................... : Enabled
Additional Clean Air Settings:
    CleanAir Event-driven RRM State.............. : Disabled
    CleanAir Driven RRM Sensitivity.............. : LOW
    CleanAir Persistent Devices state............ : Disabled

show ap dot11 cleanair summary

To view CleanAir configurations for all 802.11a Cisco APs, use the show ap dot11 cleanair summary command.

show ap dot11 {24ghz | 5ghz} cleanair summary

Syntax Description


24ghz	Specifies the 2.4-GHz band
5ghz	Specifies the 5-GHz band
cleanair summary	Summary of CleanAir configurations for all 802.11a Cisco APs

Command Default

None

Command Modes

Any command mode

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.1	This command was introduced.

show ap dot11 dual-band summary

To view a brief summary of access points with dual-band radios, use the show ap dot11 dual-band summary command.

show ap dot11 dual-band summary

Syntax Description


This command has no keywords or arguments.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification

Examples

The following example shows how to view brief summary of tag names:

Device# show ap dot11 dual-band summary

show ap environment

To see the AP environment information of all APs, use the show ap environment command.

show ap environment [ chassis {chassis-number | active | standby} R0]

Syntax Description


`chassis-number`	Enter the chassis number as either 1 or 2.
active R0	Active instance of the AP filters in Route-processor slot 0.
standby R0	Standby instance of the AP filters in Route-processor slot 0.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced in a release earlier than Cisco IOS XE Gibraltar 16.10.1.

Examples

The following example shows how to see the AP environment information:

Device# show ap environment

show ap filters active

To see the details of active AP filters, use the show ap filters active command.

show ap filters active [ chassis {chassis-number | active | standby} R0]

Syntax Description


`chassis-number`	Chassis number as either 1 or 2.
active R0	Active instance of the active AP filters in Route-processor slot 0.
standby R0	Standby instance of the active AP filters in Route-processor slot 0.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced in a release earlier than Cisco IOS XE Gibraltar 16.10.1.

Examples

The following example shows how to see the details of the active AP filters for the active instance:

Device# show ap filters active chassis active R0

show ap filters all

To see the details of all AP filters, use the show ap filters all command.

show ap filters all [ chassis {chassis-number | active | standby} R0]

Syntax Description


`chassis-number`	Enter the chassis number as either 1 or 2.
active R0	Active instance of the AP filters in Route-processor slot 0.
standby R0	Standby instance of the AP filters in Route-processor slot 0.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced in a release earlier than Cisco IOS XE Gibraltar 16.10.1.

Examples

The following example shows how to see the details of all the AP filters for the active instance:

Device# show ap filters all chassis active R0

show ap fra

To see the flexible radio assignment (FRA) configurations in APs, use the show ap fra command.

show ap fra [ chassis {chassis-number | active | standby} R0]

Syntax Description


`chassis-number`	Chassis number as either 1 or 2.
active R0	Active instance in Route-processor slot 0.
standby R0	Standby instance in Route-processor slot 0.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced in a release earlier than Cisco IOS XE Gibraltar 16.10.1.

Examples

The following example shows how to see the FRA configurations in APs:

Device# show ap fra

show ap gps location

To see the GPS location of all APs, use the show ap gps location command.

show ap gps location [ chassis {chassis-number | active | standby} R0]

Syntax Description


`chassis-number`	Enter the chassis number as either 1 or 2.
active R0	Active instance of the AP filters in Route-processor slot 0.
standby R0	Standby instance of the AP filters in Route-processor slot 0.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced in a release earlier than Cisco IOS XE Gibraltar 16.10.1.

Examples

The following example shows how to see the GPS location of all APs:

Device# show ap gps location

show history channel interface dot11Radio all

To check channel change or trigger reason and history, use the show history channel interface dot11Radio all command.

show history channel interface dot11Radio all

Syntax Description


This command has no keywords or arguments.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Amsterdam 17.2.1	This command was introduced.

Examples

This example shows how to check channel change or trigger reason and history:

Device# show history channel interface dot11Radio all

               Timestamp Slot Client count Channel Trigger
Fri May 31 12:57:04 2019    0            0      11 RRM-DCA
Fri May 31 13:10:02 2019    0            0       1 RRM-DCA
Fri May 31 12:57:04 2019    1            0      60  Manual
Fri May 31 13:00:16 2019    1            0     149     DFS

show ap link-encryption

To display the link encryption status, use the show ap link-encryption command.

show ap link-encryption [chassis | | {chassis-number | active | standby} | | R0]

Syntax Description


`chassis-number`	Chassis number as either 1 or 2.
active R0	Active instance in Route-processor slot 0.
standby R0	Standby instance in Route-processor slot 0.

Command Default

None

Command Modes

Any command mode

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.2s	This command was introduced.

Examples

This example show how to display the link-encryption status:

Device# show Cisco IOS XE Gibraltar 16.12.2s link-encryption

show ap lldp neighbors detail

To view the details of the AP Link Layer Discovery Protocol (LLDP) neighbor information on the controller, when the AP is connected to the third-party switch.

show ap lldp neighbors detail

Syntax Description


This command has no arguments.

Command Default

None

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Bengaluru 17.5.1	This command was introduced.

Usage Guidelines

None

Examples

The following example shows how to view the details of AP Link Layer Discovery Protocol (LLDP) neighbor information on the controller, when the AP is connected to the third-party switch:

Device# show ap lldp neighbors detail
Number of neighbors: 1
AP Name               : 9130-ap1
AP Interface          : GigabitEthernet0
--------------------------------------------------------
Neighbor MAC          : c89c.1db1.1f80
Neighbor Name         : flex-ctlr-switch
System Description    : Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 15.2(4)E6, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Thu 05-Apr-18 02:22 by prod_rel_team
Port ID               : Gi1/0/15
Port Description      : 9130-ap2
Chassis Alias         :
Management Addresses  :
  IPv4 address         : None
  IPv6 address         : None
Capabilities          :
  Bridge
  Router
Last updated time     : 12/02/2020 09:15:48

show ap lldp neighbors

To view the AP Link Layer Discovery Protocol (LLDP) neighbor information on the controller, when the AP is connected to the third-party switch.

show ap lldp neighbors

Syntax Description


This command has no arguments.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Bengaluru 17.5.1	This command was introduced.

Usage Guidelines

None

Examples

The following example shows how to view the AP Link Layer Discovery Protocol (LLDP) neighbor information on the controller, when the AP is connected to the third-party switch:

Device# show ap lldp neighbors
Capability Codes:
     (R) Router, (B) Bridge, (T) Telephone, (C) DOCSIS Cable Device
     (W) WLAN Access Point, (P) Repeater, (S) Station, (O) Other


AP Name   AP Interface      Neighbor Name Neighbor MAC    Port ID    Mgmt. Address Capabilities  Last updated time
------------------------------------------------------------------------------------------------------------------
9130-ap1  GigabitEthernet0  switch        cxxc.1dxx.1fxx  Gi1/0/15   None          B R         12/02/2020 09:15:48

9117-ap1  GigabitEthernet0  switch        cxxc.1dxx.1fxx  Gi1/0/19   None          B R         12/02/2020 09:15:47

show ap name lldp neighbors detail

To view the details of the AP Link Layer Discovery Protocol (LLDP) neighbor information on the controller, for a specific AP, when the AP is connected to the third-party switch.

show ap name ap-name lldp neighbors detail

Syntax Description


This command has no arguments.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Bengaluru 17.5.1	This command was introduced.

Usage Guidelines

None

Examples

The following example shows how to view the details of the AP Link Layer Discovery Protocol (LLDP) neighbor information on the controller, for a specific AP, when the AP is connected to the third-party switch:

Device# show ap name 9130-ap1 lldp neighbors detail
AP Name               : 9130-ap1
AP Interface          : GigabitEthernet0
--------------------------------------------------------
Neighbor MAC          : c89c.1db1.1f80
Neighbor Name         : flex-ctlr-switch
System Description    : Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 15.2(4)E6, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Thu 05-Apr-18 02:22 by prod_rel_team
Port ID               : Gi1/0/15
Port Description      : 9130-ap2
Chassis Alias         :
Management Addresses  :
  IPv4 address         : None
  IPv6 address         : None
Capabilities          :
  Bridge
  Router
Last updated time     : 12/02/2020 09:15:48

show ap name lldp neighbors

To view the AP Link Layer Discovery Protocol (LLDP) neighbor information on the controller, for a specific AP, when the AP is connected to the third-party switch.

show ap name ap-name lldp neighbors

Syntax Description


This command has no arguments.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Bengaluru 17.5.1	This command was introduced.

Usage Guidelines

None

Examples

The following example shows how to view the AP Link Layer Discovery Protocol (LLDP) neighbor information on the controller, for a specific AP, when the AP is connected to the third-party switch:

Device# show ap name 9130-ap1 lldp neighbors
AP Name               : 9130-ap1
AP Interface          : GigabitEthernet0
--------------------------------------------------------
Neighbor MAC          : c89c.1db1.1f80
Neighbor Name         : flex-ctlr-switch
System Description    : Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 15.2(4)E6, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018     by Cisco Systems, Inc.
Compiled Thu 05-Apr-18 02:22  02:22 by prod_rel_team
Port ID               : Gi1/0/15
Port Description      : 9130-ap2
Chassis Alias         :
Management Addresses  :
  IPv4 address         : None
  IPv6 address         : None
Capabilities          :
  Bridge
  Router
Last updated time     : 12/02/2020 09:15:48

show ap name ntp status

To display the Network Time Protocol (NTP) status of an AP, use the show ap name ntp status command.

show ap name ap-name ntp status

Syntax Description


`ap-name`	AP name.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Bengaluru 17.6.1	This command was introduced.

Examples

The following example shows how to view the NTP status of an AP:

Device# show ap name AP-G1-230 ntp status

ap-name       enabled v4/v6 IPAddress       Status     Stratum LastSync  SyncOffset
AP-G1-230     Y       v4    198.51.100.5    AuthFail   4       1000      100

show ap ntp status

To display the Network Time Protocol (NTP) status for all the APs, use the show ap name ntp status command.

show ap ntp status

Syntax Description


This command has no keywords and arguments.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Bengaluru 17.6.1	This command was introduced.

Examples

The following example shows how to view the NTP status for all the APs:

Device# show ap ntp status

ap-name       enabled    v4/v6 IPAddress       Status   Stratum LastSync SyncOffset
AP-G1-230         Y      v4    198.51.100.5    AuthFail 2       Never     
AP-G1-231         Y      v4    198.51.100.10   Synced   3       1000     100
AP-G1-232         Y      v4    198.51.100.15   Synced   16      2000     50

show ap master list

To see the AP master list, use the show ap master list command.

show ap master list [chassis | | {chassis-number | active | standby} | | R0]

Syntax Description


`chassis-number`	Chassis number as either 1 or 2.
active R0	Active instance in Route-processor slot 0.
standby R0	Standby instance in Route-processor slot 0.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced in a release earlier than Cisco IOS XE Gibraltar 16.10.1.

Examples

The following example shows how to see the AP master list:

Device# show ap master list

show ap multicast mom (multicast over multicast)

To confirm if the APs receive multicast to multicast (mom) traffic sent by the controller, using CAPWAP multicast group, use the show ap multicast mom command.

Syntax Description


This command has no keywords and arguments.

Command Default

None

Command Modes

Previleged EXEC

Command History


Release	Modification
Cisco IOS XE Amsterdam 17.2	This command was introduced.

Examples

This example shows how to confirm if the APs receive multicast to multicast traffic sent by the controller using CAPWAP multicast group:

Device# show ap multicast mom

AP Name                    MOM-IP     TYPE MOM- STATUS
------------------------------------------------------
SS-E-1                     IPv4             Up
SS-E-2                     IPv4             Up
9130E-r3-sw2-g1012         IPv4             Up
9115i-r3-sw2-te1-0-38      IPv4             Up
AP9120-r3-sw3-Gi1-0-46     IPv4             Up
ap3800i-r2-sw1-te2-0-2     IPv4             Up

show ap name auto-rf

To display the auto-RF settings for a Cisco lightweight access point, use the show ap name auto-rf command.

show ap name ap-name auto-rf dot11 {24ghz | 5ghz | dual-band}

Syntax Description


`ap-name`	Name of the Cisco lightweight access point.
24ghz	Displays the 2.4 GHz band.
5ghz	Displays the 5 GHz band.
dual-band	Displays dual band.

Command Default

None

Command Modes

Privileged EXEC.

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.2s	This command was introduced.

Examples

This example shows how to display auto-RF information for an access point:

Device# show ap name AP01 auto-rf dot11 24ghz

Number of Slots                                  : 2
AP Name                                          : TSIM_AP-1
MAC Address                                      : 0000.2000.02f0
Slot ID                                          : 0
Radio Type                                       : 802.11b/g
Subband Type                                     : All

Noise Information
  Noise Profile                                  : Failed
  Channel   1                                     :   24 dBm
  Channel   2                                     :   48 dBm
  Channel   3                                     :   72 dBm
  Channel   4                                     :   96 dBm
  Channel   5                                     :  120 dBm
  Channel   6                                     : -112 dBm
  Channel   7                                     :  -88 dBm
  Channel   8                                     :  -64 dBm
  Channel   9                                     :  -40 dBm
  Channel  10                                     :  -16 dBm
  Channel  11                                     :    8 dBm

Interference Information
  Interference Profile                           : Passed
  Channel   1                                     : -128 dBm @  0% busy
  Channel   2                                     :  -71 dBm @  1% busy
  Channel   3                                     :  -72 dBm @  1% busy
  Channel   4                                     :  -73 dBm @  2% busy
  Channel   5                                     :  -74 dBm @  3% busy
  Channel   6                                     :  -75 dBm @  4% busy
  Channel   7                                     :  -76 dBm @  5% busy
  Channel   8                                     :  -77 dBm @  5% busy
  Channel   9                                     :  -78 dBm @  6% busy
  Channel  10                                     :  -79 dBm @  7% busy
  Channel  11                                     :  -80 dBm @  8% busy

Rogue Histogram (20/40_ABOVE/40_BELOW)
    Channel  36                                   : 27/ 4/ 0
    Channel  40                                   : 13/ 0/ 0
    Channel  44                                   :  5/ 0/ 0
    Channel  48                                   :  6/ 0/ 1
    Channel  52                                   :  4/ 0/ 0
    Channel  56                                   :  5/ 0/ 0
    Channel  60                                   :  1/ 3/ 0
    Channel  64                                   :  3/ 0/ 0
    Channel 100                                   :  0/ 0/ 0
    Channel 104                                   :  0/ 0/ 0
    Channel 108                                   :  0/ 1/ 0

Load Information
  Load Profile                                   : Passed
  Receive Utilization                            : 10%
  Transmit Utilization                           : 20%
  Channel Utilization                            : 50%
  Attached Clients                               : 0 clients

Coverage Information
  Coverage Profile                               : Passed
  Failed Clients                                 : 0 clients

Client Signal Strengths
  RSSI -100 dBm                                  : 0 clients
  RSSI  -92 dBm                                  : 0 clients
  RSSI  -84 dBm                                  : 0 clients
  RSSI  -76 dBm                                  : 0 clients
  RSSI  -68 dBm                                  : 0 clients
  RSSI  -60 dBm                                  : 0 clients
  RSSI  -52 dBm                                  : 0 clients

Client Signal to Noise Ratios
  SNR    0 dB                                    : 0 clients
  SNR    5 dB                                    : 0 clients
  SNR   10 dB                                    : 0 clients
  SNR   15 dB                                    : 0 clients
  SNR   20 dB                                    : 0 clients
  SNR   25 dB                                    : 0 clients
  SNR   30 dB                                    : 0 clients
  SNR   35 dB                                    : 0 clients
  SNR   40 dB                                    : 0 clients
  SNR   45 dB                                    : 0 clients

Nearby APs
  AP 0000.2000.0300 slot 0                       : -68 dBm on  11 (10.10.10.1)
  AP 0000.2000.0400 slot 0                       : -68 dBm on  11 (10.10.10.1)
  AP 0000.2000.0600 slot 0                       : -68 dBm on  11 (10.10.10.1)

Radar Information

Channel Assignment Information
  Current Channel Average Energy                 : 0 dBm
  Previous Channel Average Energy                : 0 dBm
  Channel Change Count                           : 0
  Last Channel Change Time                       : Wed Oct 17 08:13:36 2012
  Recommended Best Channel                       : 11

RF Parameter Recommendations
  Power Level                                    : 1
  RTS/CTS Threshold                              : 2347
  Fragmentation Threshold                        : 2346
  Antenna Pattern                                : 0

Persistent Interference Devices

show ap name ble detail

To display BLE management details, use the show ap name ble detail command.

show ap name ap-name ble detail

Syntax Description


`ap-name`	Specifies the name of the AP.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Amsterdam 17.3.1	This command was introduced.

Usage Guidelines

None

Examples

The following example shows how to display the BLE management details:

Device(config)# show ap name ap-name ble detail

show ap name cablemodem

To see cable modem information of an AP, use the show ap name ap-name cablemodem command.

show ap name ap-name cablemodem [ chassis {chassis-number | active | standby} R0]

Syntax Description


`ap-name`	Name of the AP.
`chassis-number`	Enter the chassis number as either 1 or 2.
active R0	Active instance of the AP filters in Route-processor slot 0.
standby R0	Standby instance of the AP filters in Route-processor slot 0.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced in a release earlier than Cisco IOS XE Gibraltar 16.10.1.

Examples

The following example shows how to see cable modem information of an AP:

Device# show ap name my-ap cablemodem

show ap name config

To display common information and Ethernet VLAN tagging information for a specific Cisco lightweight access point, use the show ap name config command.

show ap name ap-name config {ethernet | general}

Syntax Description


`ap-name`	Name of the Cisco lightweight access point.
ethernet	Displays Ethernet tagging configuration information for an access point.
general	Displays common information for an access point.

Command Default

None

Command Modes

Any command mode

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.1	This command was introduced.

Examples

This example shows how to display Ethernet tagging information for an access point:

Device# show ap name AP01 config ethernet

VLAN Tagging Information for AP01

This example shows how to display common information for an access point:

Device# show ap name AP01 config general

Cisco AP Name                                   : AP01
Cisco AP Identifier                             : 5
Country Code                                    : US  - United States
Regulatory Domain Allowed by Country            : 802.11bg:-A     802.11a:-A
AP Country Code                                 : US  - United States
AP Regulatory Domain                            : Unconfigured
Switch Port Number                              : Te1/0/1
MAC Address                                     : 0000.2000.02f0
IP Address Configuration                        : Static IP assigned
IP Address                                      : 10.10.10.12
IP Netmask                                      : 255.255.0.0
Gateway IP Address                              : 10.10.10.1
Fallback IP Address Being Used                  : 10.10.10.12
Domain                                          : Cisco
Name Server                                     : 0.0.0.0
CAPWAP Path MTU                                 : 1485
Telnet State                                    : Enabled
SSH State                                       : Disabled
Cisco AP Location                               : sanjose
Cisco AP Group Name                             : default-group
Primary Cisco Controller Name                   : CAPWAP Controller
Primary Cisco Controller IP Address             : 10.10.10.1
Secondary Cisco Controller Name                 :
Secondary Cisco Controller IP Address           : Not Configured
Tertiary Cisco Controller Name                  :
Tertiary Cisco Controller IP Address            : Not Configured
Administrative State                            : Enabled
Operation State                                 : Registered
AP Mode                                         : Local
AP Submode                                      : Not Configured
Remote AP Debug                                 : Disabled
Logging Trap Severity Level                     : informational
Software Version                                : 7.4.0.5
Boot Version                                    : 7.4.0.5
Stats Reporting Period                          : 180
LED State                                       : Enabled
PoE Pre-Standard Switch                         : Disabled
PoE Power Injector MAC Address                  : Disabled
Power Type/Mode                                 : Power Injector/Normal Mode
Number of Slots                                 : 2
AP Model                                        : 1140AG
AP Image                                        : C1140-K9W8-M
IOS Version                                     :
Reset Button                                    :
AP Serial Number                                : SIM1140K001
AP Certificate Type                             : Manufacture Installed
Management Frame Protection Validation          : Disabled
AP User Mode                                    : Customized
AP User Name                                    : cisco
AP 802.1X User Mode                             : Not Configured
AP 802.1X User Name                             : Not Configured
Cisco AP System Logging Host                    : 255.255.255.255
AP Up Time                                      : 15 days 16 hours 19 minutes 57
 seconds
AP CAPWAP Up Time                               : 4 minutes 56 seconds
Join Date and Time                              : 10/18/2012 04:48:56
Join Taken Time                                 : 15 days 16 hours 15 minutes 0
seconds
Join Priority                                   : 1
Ethernet Port Duplex                            : Auto
Ethernet Port Speed                             : Auto
AP Link Latency                                 : Disabled
Rogue Detection                                 : Disabled
AP TCP MSS Adjust                               : Disabled
AP TCP MSS Size                                 : 6146

show ap name config slot

To display the configuration of a Cisco AP and also display the common information for a slot, use the show ap name config slot command.

show ap name Cisco-ap-name slot 0-3

Syntax Description


`Cisco-ap-name`	Specifies the name of the Cisco AP.
`0-3`	Specifies the slot ID.

Command Default

None

Command Modes

Any command mode

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.1	This command was introduced.

Examples

This example shows how to display common information for a slot in an access point:

Device# show ap name Cisco-ap-name config slot 3

show ap name config ethernet

To see Ethernet related configuration information of an AP, use the show ap name ap-name config ethernet command.

show ap name ap-name config ethernet [ chassis {chassis-number | active | standby} R0]

Syntax Description


`ap-name`	Name of the AP.
`chassis-number`	Enter the chassis number as either 1 or 2.
active R0	Active instance of the AP filters in Route-processor slot 0.
standby R0	Standby instance of the AP filters in Route-processor slot 0.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced in a release earlier than Cisco IOS XE Gibraltar 16.10.1.

Examples

The following example shows how to see Ethernet related configuration information of an AP:

Device# show ap name my-ap config ethernet

show ap name dot11

To display 802.11a or 802.11b configuration information that corresponds to specific Cisco lightweight access points, use the show ap name dot11 command.

show ap name ap-name dot11 { 24ghz | 5ghz } { SI | airtime-fairness | call-control | cleanair radio-reset | voice }

Syntax Description


`ap-name`	Name of the Cisco lightweight access point.
24ghz	Displays the 2.4-GHz band.
5ghz	Displays the 5-GHz band.
SI	Displays the SI configurations.
airtime-fairness	Displays the stats of 24Ghz or 5Ghz airtime-fairness.
call-control	Displays the call control information.
radio-reset	Displays radio-reset.
slot	Displays slot information.
voice	Displays voice information.

Command Default

None

Command Modes

Any command mode

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.2s	This command was introduced.

Examples

This example shows how to display the cleanair air-quality that is associated with the access point:

Device# show ap name test-ap dot11 24ghz cleanair air-quality chassis active r0

show ap name environment

To see the AP environment information of an AP, use the show ap name ap-name environment command.

show ap name ap-name environment [ chassis {chassis-number | active | standby} R0]

Syntax Description


`ap-name`	Name of the AP.
`chassis-number`	Enter the chassis number as either 1 or 2.
active R0	Active instance of the AP filters in Route-processor slot 0.
standby R0	Standby instance of the AP filters in Route-processor slot 0.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced in a release earlier than Cisco IOS XE Gibraltar 16.10.1.

Examples

The following example shows how to see the AP environment information of an AP:

Device# show ap name my-ap environment

show ap name gps location

To see the GPS location of the AP, use the show ap name gps location command.

show ap name ap-name gps location[ {chassis-number | active | standby}R0

Syntax Description


`ap-name`	Name of the Access Point
gps	See the GPS information of a Cisco AP
location	Shows the Mesh linktest data
`chassis-number`	Enter the chassis number as either 1 or 2.
active R0	Active instance of the active AP filters in Route-processor slot 0.
standby R0	Standby instance of the configuration in Route-processor slot 0.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced in a release earlier than Cisco IOS XE Gibraltar 16.10.1.

Examples

The following example shows how to see the GPS location of an AP:

Device# show ap name mesh-profile-name gps location

show ap name mesh backhaul

To see mesh backhaul statistics of an AP, use the show ap name ap-name mesh backhaul command.

show ap name ap-name mesh backhaul [ chassis {chassis-number | active | standby} R0]

Syntax Description


`chassis-number`	Enter the chassis number as either 1 or 2.
active R0	Active instance of the AP filters in Route-processor slot 0.
standby R0	Standby instance of the AP filters in Route-processor slot 0.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced in a release earlier than Cisco IOS XE Gibraltar 16.10.1.

Examples

The following example shows how to see mesh backhaul statistics of an AP:

Device# show ap name mymeshap mesh backhaul

show ap name mesh bhrate

To see mesh bachkhaul data rate for an AP, use the show ap name ap-name mesh bhrate command.

show ap name ap-name mesh bhrate [ chassis {chassis-number | active | standby} R0]


`ap-name`	Name of the AP.
`chassis-number`	Enter the chassis number as either 1 or 2.
active R0	Active instance of the AP filters in Route-processor slot 0.
standby R0	Standby instance of the AP filters in Route-processor slot 0.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced in a release earlier than Cisco IOS XE Gibraltar 16.10.1.

Examples

The following example shows how to see mesh bachkhaul data rate for an AP:

Device# show ap name mymeshap mesh bhrate

show ap name mesh linktest

To see the mesh linktest data, use the show ap name mesh linktest data command.

show ap name ap-name mesh linktest data dest-mac [ chassis {chassis-number | active | standby}R0]

Syntax Description


`ap-name`	Name of the Access Point
linktest	Shows the Mesh linktest
data	Shows the Mesh linktest data
`dest-mac`	Enter the AP MAC address.
`chassis-number`	Enter the chassis number as either 1 or 2.
active R0	Active instance of the configuration in Route-processor slot 0.
standby R0	Standby instance of the configuration in Route-processor slot 0.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced in a release earlier than Cisco IOS XE Gibraltar 16.10.1.

Examples

The following example shows how to see the mesh linktest data of an AP:

Device# show ap name mesh-profile-namemesh linktest data 83-88-15-0C-83-72

show ap name mesh path

To see information about the mesh AP's path, use the show ap name ap-name mesh path command.

show ap name ap-name mesh path [ chassis {chassis-number | active | standby} R0]

Syntax Description


`chassis-number`	Enter the chassis number as either 1 or 2.
active R0	Active instance of the AP filters in Route-processor slot 0.
standby R0	Standby instance of the AP filters in Route-processor slot 0.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced in a release earlier than Cisco IOS XE Gibraltar 16.10.1.

Examples

The following example shows how to see information about the mesh AP's path:

Device# show ap name mymeshap mesh path

show ap name mesh stats

To see mesh statistics, use the show ap name ap-name mesh stats command.

show ap name ap-name [packet error | queue | security]

Syntax Description


`ap-name`	Name of the AP.
packet error	Mesh packet error statistics.
queue	Mesh queue statistics.
security	Mesh security statistics.
`chassis-number`	Enter the chassis number as either 1 or 2.
active R0	Active instance of the AP filters in Route-processor slot 0.
standby R0	Standby instance of the AP filters in Route-processor slot 0.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced in a release earlier than Cisco IOS XE Gibraltar 16.10.1.

Examples

The following example shows how to see mesh statistics:

Device# show ap name mymeshap mesh stats

show ap name wlan

To display the Basic Service Set Identifier (BSSID) value for each WLAN defined on an access point and to display WLAN statistics, use the show ap name wlan command.

show ap name ap-name wlan {dot11 {24ghz | 5ghz} | statistic}

Syntax Description


`ap-name`	Name of the Cisco lightweight access point.
dot11	Displays 802.11 parameters.
24ghz	Displays 802.11b network settings.
5ghz	Displays 802.11a network settings.
statistic	Displays WLAN statistics.

Command Default

None

Command Modes

Any command mode

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.1	This command was introduced.

Examples

This example shows how to display BSSID information of an access point in an 802.11b network:

Device# show ap name AP01 wlan dot11 24ghz

Site Name                                        : default-group
Site Description                                 :

WLAN ID  Interface  BSSID
-------------------------------------
1        default    00:00:20:00:02:00
12       default    00:00:20:00:02:0b

This example shows how to display WLAN statistics for an access point:

Device# show ap name AP01 wlan statistic

WLAN ID  : 1
WLAN Profile Name  : maria-open

   EAP Id Request Msg Timeouts           : 0
   EAP Id Request Msg Timeouts Failures  : 0
   EAP Request Msg Timeouts              : 0
   EAP Request Msg Timeouts Failures     : 0
   EAP Key Msg Timeouts                  : 0
   EAP Key Msg Timeouts Failures         : 0


WLAN ID  : 12
WLAN Profile Name  : 24

   EAP Id Request Msg Timeouts           : 0
   EAP Id Request Msg Timeouts Failures  : 0
   EAP Request Msg Timeouts              : 0
   EAP Request Msg Timeouts Failures     : 0
   EAP Key Msg Timeouts                  : 0
   EAP Key Msg Timeouts Failures         : 0

show ap profile

To see overall status of Hyperlocation for an AP profile, use the show ap profile command.

show ap profile profile-name {detailed | hyperlocation {ble-beacon | detail | summary}} [ chassis {chassis-number | active | standby} R0]

Syntax Description


`profile-name`	AP profile name.
detailed	Shows the detailed parameters of the AP join profile.
hyperlocation	Shows Hyperlocation information for the AP profile.
ble-beacon	Show the list of configured BLE beacons for the AP profile.
detail	Shows detailed status of Hyperlocation for the AP profile.
summary	Shows overall status of Hyperlocation for the AP profile
`chassis-number`	Chassis number as either 1 or 2.
active R0	Active instance in Route-processor slot 0.
standby R0	Standby instance in Route-processor slot 0.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced in a release earlier than Cisco IOS XE Gibraltar 16.10.1.

Examples

The following example shows how to see the overall status of Hyperlocation for an AP profile:

Device# show ap profile my-ap-profile detailed

show ap rf-profile name

To display the selected ap RF-Profile details, use the show ap rf-profile name command.

show ap rf-profile name profile-name detail

Syntax Description


`profile-name`	Name of the RF-Profile.
detail	Show detail of selected RF Profile.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Denali 16.3.1	This command was introduced.

Usage Guidelines

None

Examples

This example shows how to display the details of the selected RF-Profile.

Device#show ap rf-profile name doctest detail
Description :
AP Group Names :
RF Profile Name : doctest
Band : 2.4 GHz
802.11n client only : Disabled
Transmit Power Threshold v1: -70 dBm
Min Transmit Power: -10 dBm
Max Transmit Power: 30 dBm
Operational Rates
  802.11b 1M Rate : Mandatory
  802.11b 2M Rate : Mandatory
  802.11b 5.5M Rate : Mandatory
  802.11b 11M Rate : Mandatory
  802.11b 6M Rate : Mandatory
  802.11b 9M Rate : Supported
  802.11b 12M Rate : Supported
  802.11b 18M Rate : Supported
  802.11b 24M Rate : Supported
  802.11b 36M Rate : Supported
  802.11b 48M Rate : Supported
  802.11b 54M Rate : Supported
Max Clients : 200
Wlan name                        Max Clients
--------------------------------------------

Trap Threshold
  Clients:  12 clients
  Interference:  10%
  Noise:  -70 dBm
  Utilization:  80%
Multicast Data Rate: auto
Rx SOP Threshold : auto
Band Select
  Probe Response:  Disabled
  Cycle Count:  2 cycles
  Cycle Threshold:  200 milliseconds
  Expire Suppression:  20 seconds
  Expire Dual Band:  60 seconds
  Client RSSI:  -80 dBm
  Client Mid RSSI:  -80 dBm
Load Balancing
  Window:  5 clients
  Denial:  3 count
Coverage Data
  Data: -80 dBm
  Voice: -80 dBm
 Minimum Client Level: 3 clients
  Exception Level: 25%
DCA Channel List  : 1,5,9,13
DCA Foreign AP Contribution : Enabled
802.11n MCS Rates
  MCS 0 : Enabled
  MCS 1 : Enabled
  MCS 2 : Enabled
  MCS 3 : Enabled
  MCS 4 : Enabled
  MCS 5 : Enabled
  MCS 6 : Enabled
  MCS 7 : Enabled
  MCS 8 : Enabled
  MCS 9 : Enabled
  MCS 10 : Enabled
  MCS 11 : Enabled
  MCS 12 : Enabled
  MCS 13 : Enabled
  MCS 14 : Enabled
  MCS 15 : Enabled
  MCS 16 : Enabled
  MCS 17 : Enabled
  MCS 18 : Enabled
  MCS 19 : Enabled
  MCS 20 : Enabled
  MCS 21 : Enabled
  MCS 22 : Enabled
  MCS 23 : Enabled
  MCS 24 : Enabled
  MCS 25 : Enabled
  MCS 26 : Enabled
  MCS 27 : Enabled
  MCS 28 : Enabled
  MCS 29 : Enabled
  MCS 30 : Enabled
  MCS 31 : Enabled
State : Down

show ap rf-profile summary

To display the ap RF-Profile summary, use the show ap rf-profile summary command.

show ap rf-profile summary

Syntax Description


summary	Show summary of RF Profiles

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Denali 16.3.1	This command was introduced.

Usage Guidelines

None

Examples

This example shows how to display the ap RF-Profile summary .

Device#show ap rf-profile summary 
Number of RF Profiles : 1

RF Profile Name                   Band      Description           Applied   State
---------------------------------------------------------------------------------
doctest                           2.4 GHz                         No        Down

show ap summary

To display the status summary of all Cisco lightweight access points attached to the device, use the show ap summary command.

show ap summary

Syntax Description


This command has no keywords and arguments.

Command Default

None

Command Modes

Any command mode

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.1	This command was introduced.

Usage Guidelines

Use this command to display a list that contains each lightweight access point name, number of slots, manufacturer, MAC address, location, and the device port number.

Examples

This example shows how to display a summary of all connected access points:

Controller# show ap summary

Number of APs: 1

Global AP User Name: Cisco
Global AP Dot1x User Name: Not configured

AP Name                           AP Model  Ethernet MAC    Radio MAC       State         
----------------------------------------------------------------------------------------
3602a                             3502I     003a.99eb.3fa8  d0c2.8267.8b00  Registered

show ap tag sources

To see AP tag sources with priorities, use the show ap tag sources command.

show ap tag sources [ chassis {chassis-number | active | standby} R0]

Syntax Description


`chassis-number`	Chassis number as either 1 or 2.
active R0	Active instance of the AP filters in Route-processor slot 0.
standby R0	Standby instance of the AP filters in Route-processor slot 0.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced in a release earlier than Cisco IOS XE Gibraltar 16.10.1.

Examples

The following example shows how to see the AP tag sources with priorities for the active instance:

Device# show ap tag sources chassis active R0

show ap tag summary

To view brief summary of tag names, use the show ap tag summary command.

show ap tag summary

Syntax Description


This command has no keywords or arguments.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced.

Examples

The following example shows how to view brief summary of tag names:

Device# show ap tag summary

show ap timezone

To check the AP timezone information, use the show ap timezone command.

show ap timezone

Syntax Description


This command has no keywords and arguments.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Bengaluru 17.6.1	This command was introduced.

Examples

The following example shows how to check the AP timezone information:

Device# show ap timezone

AP Name   Status     Offsets(h/m) 
--------------------------------
AP1       Disabled    0:0
AP2       Enabled     1:0

show ap upgrade

To see AP upgrade information, use the show ap upgrade command.

show ap upgrade [name ap-upgrade-report-name | summary | chassis {chassis-number | active | standby}]

Syntax Description


name `ap-upgrade-report-name`	Enter the name of the AP upgrade report.
summary	Shows a summary of AP upgrade information.
`chassis-number`	Enter the chassis number as either 1 or 2.
active R0	Active instance in Route-processor slot 0.
standby R0	Standby instance in Route-processor slot 0.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced in a release earlier than Cisco IOS XE Gibraltar 16.10.1.

Examples

The following example shows how to see a summary of the AP upgrade information:

Device# show ap upgrade summary

show arp

To view the ARP table, use the show arp command.

show arp

Syntax Description


arp	Shows ARP table

Command Modes

User EXEC (>)

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced in a release earlier than Cisco IOS XE Gibraltar 16.10.1.

Examples

The following example shows a sample output of the command:

Device# show arp

Address Age (min)     Hardware Addr
   9.11.8.1         0 84:80:2D:A0:D2:E6
9.11.32.111         0 3C:77:E6:02:33:3F

show arp summary

To see the ARP table summary, use the show arp summary command.

show arp summary

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced in a release earlier than Cisco IOS XE Gibraltar 16.10.1.

Examples

The following example shows how to see the ARP table summary:

Device# show arp summary

show ap upgrade site

To view the upgrade site-related infromation, use the show ap upgrade site command.

show ap upgrade site [ summary ]

Syntax Description


summary	(Optional) Displays a summary of access point (AP) upgrade on individual sites.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Cupertino 17.9.1	This command was introduced.

Examples

The following example shows how to view the upgrade site-related infromation:

Device# show ap upgrade site

Site-filtered AP upgrade report data
====================================
Source controller: Controller1
Destination controller: Controller2
Site-filters present: Yes
 
AP image upgrade site summary
-----------------------------
Operation: N+1 move
 
Site Tag                                  Status
---------------------------------------------------------
site1                                     In Progress
 
AP upgrade reports linked to these site-filters
-----------------------------------------------
 
Start time               Operation type             Report name
------------------------------------------------------------------------
01/30/2022 10:34:36 IST  AP image upgrade/move CLI  AP_upgrade_to_Controller2_3002022103435

show avc client

To display information about top number of applications, use the show avc client command in privileged EXEC mode.

show avc client client-mac top n application [ aggregate| upstream| downstream]

Syntax Description


client `client-mac`	Specifies the client MAC address.
top `n` application	Specifies the number of top "N" applications for the given client.

Command Default

No default behavior or values.

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.1	This command was introduced.

Examples

The following is sample output from the show avc client command:

Device# sh avc client 0040.96ae.65ec top 10 application aggregate

Cumulative Stats:

No.  AppName      Packet-Count    Byte-Count       AvgPkt-Size     usage%
---------------------------------------------------------------------------
1    skinny          7343           449860           61             94
2    unknown         99             13631            137            3
3    dhcp            18             8752             486            2
4    http            18             3264             181            1
5    tftp            9              534              59             0
6    dns             2              224              112            0

Last Interval(90 seconds) Stats:

No.  AppName     Packet-Count     Byte-Count       AvgPkt-Size      usage%
----------------------------------------------------------------------------
1    skinny          9              540              60              100

show avc wlan

To display information about top applications and users using the applications, use the show avc wlan command in privileged EXEC mode.

show avc wlan ssid top n application [ aggregate| upstream| downstream]

Syntax Description


wlan `ssid`	Specifies the Service Set IDentifier (SSID) for WLAN.
top `n` application	Specifies the number of top "N" applications.

Command Default

No default behavior or values.

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.1	This command was introduced.

Examples

The following is sample output from the show avc wlan command:

Device# show avc wlan Lobby_WLAN top 10 application aggregate

Cumulative Stats:

No.  AppName           Packet-Count          Byte-Count          AvgPkt-Size  usage%
--------------------------------------------------------------------------------------
1    ssl                10598677              1979525706            997          42
2    vnc                5550900               3764612847            678          14
3    http               3043131               2691327197            884          10
4    unknown            1856297               1140264956            614          4
5    video-over-http    1625019               2063335150            1269         8
6    binary-over-http   1329115               1744190344            1312         6
7    webex-meeting      1146872               540713787             471          2
8    rtp                923900                635650544             688          2
9    unknown            752341                911000213             1210         3
10   youtube            631085                706636186             1119         3

Last Interval(90 seconds) Stats:

No.  AppName          Packet-Count          Byte-Count            AvgPkt-Size  usage%
---------------------------------------------------------------------------------------
1    vnc                687093                602731844             877          68
2    video-over-http    213272                279831588             1312         31
3    ssl                6515                  5029365               771          1
4    webex-meeting      3649                  1722663               472          0
5    http               2634                  1334355               506          0
6    unknown            1436                  99412                 69           0
7    google-services    722                   378121                523          0
8    linkedin           655                   393263                600          0
9    exchange           432                   167390                387          0
10   gtalk-chat         330                   17330                 52           0

show chassis

To see the chassis information, use the show chassis command.

show chassis [1 | 2 | detail | mode | neighbors | ha-status {active | local | standby}]

Syntax Description


{`1` \| `2`}	Chassis number as 1 or 2 to see the information about the relevant chassis.
detail	Shows detailed information about the chassis.
mode	Shows information about the chassis mode.
neighbors	Shows information about the chassis neighbors.
ha-status	Option to see information about the High Availability (HA) status.
active	Shows HA status on the chassis that is in active state.
local	Shows HA status on the local .
standby	Shows HA status on the chassis that is in standby state.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced in a release earlier than Cisco IOS XE Gibraltar 16.10.1.

Examples

The following example shows how to see the HA status on the active chassis:

Device# show chassis ha-status active

show checkpoint

To display information about the Checkpoint Facility (CF) subsystem, use the show checkpoint command.

show checkpoint { clients client-ID <0-381>| entitiesentity-ID <1-7> | statistics buffer-usage}

Syntax Description


clients	Displays detailed information about checkpoint clients.
entities	Displays detailed information about checkpoint entities.
statistics	Displays detailed information about checkpoint statistics.
buffer-usage	Displays the checkpoint statistics of clients using large number of buffers.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
	This command was introduced.

Examples

This example shows how to display all the CF clients.

   Client residing in process  : 8135
--------------------------------------------------------------------------------
Checkpoint client: WCM_MOBILITY
    Client ID                   : 24105
    Total DB inserts            : 0
    Total DB updates            : 0
    Total DB deletes            : 0
    Total DB reads              : 0
    Number of tables            : 6
    Client residing in process  : 8135
--------------------------------------------------------------------------------
Checkpoint client: WCM_DOT1X
    Client ID                   : 24106
    Total DB inserts            : 2
    Total DB updates            : 1312
    Total DB deletes            : 2
    Total DB reads              : 0
    Number of tables            : 1
    Client residing in process  : 8135
--------------------------------------------------------------------------------
Checkpoint client: WCM_APFROGUE
    Client ID                   : 24107
    Total DB inserts            : 0
    Total DB updates            : 0
    Total DB deletes            : 0
    Total DB reads              : 0
    Number of tables            : 1
    Client residing in process  : 8135
--------------------------------------------------------------------------------
Checkpoint client: WCM_CIDS
    Client ID                   : 24110
    Total DB inserts            : 0
    Total DB updates            : 0
    Total DB deletes            : 0
    Total DB reads              : 0
    Number of tables            : 0
    Client residing in process  : 8135
--------------------------------------------------------------------------------
Checkpoint client: WCM_NETFLOW
    Client ID                   : 24111
    Total DB inserts            : 7
    Total DB updates            : 0
    Total DB deletes            : 0
    Total DB reads              : 0
    Number of tables            : 1
    Client residing in process  : 8135
--------------------------------------------------------------------------------
Checkpoint client: WCM_MCAST
    Client ID                   : 24112
    Total DB inserts            : 0
    Total DB updates            : 0
    Total DB deletes            : 0
    Total DB reads              : 0
    Number of tables            : 1
    Client residing in process  : 8135
--------------------------------------------------------------------------------
Checkpoint client: wcm_comet
    Client ID                   : 24150
    Total DB inserts            : 0
    Total DB updates            : 0
    Total DB deletes            : 0
    Total DB reads              : 0
    Number of tables            : 0
    Client residing in process  : 8135
--------------------------------------------------------------------------------

All iosd checkpoint clients

--------------------------------------------------------------------------------
Client Name            Client     Entity     Bundle
                           ID         ID       Mode
--------------------------------------------------------------------------------
Network RF Client           3         --       Off

  Total API Messages Sent:                       0
  Total Transport Messages Sent:                 0
  Length of Sent Messages:                       0
  Total Blocked Messages Sent:                   0
  Length of Sent Blocked Messages:               0
  Total Non-blocked Messages Sent:               0
  Length of Sent Non-blocked Messages:           0
  Total Bytes Allocated:                         0
  Buffers Held:                                  0
  Buffers Held Peak:                             0
  Huge Buffers Requested:                        0
  Transport Frag Count:                          0
  Transport Frag Peak:                           0
  Transport Sends w/Flow Off:                    0
  Send Errs:                                     0
  Send Peer Errs:                                0
  Rcv Xform Errs:                                0
  Xmit Xform Errs:                               0
  Incompatible Messages:                         0
  Client Unbundles to Process Memory:            T
--------------------------------------------------------------------------------
Client Name            Client     Entity     Bundle
                           ID         ID       Mode
--------------------------------------------------------------------------------
SNMP CF Client             12         --       Off

  Total API Messages Sent:                       0
  Total Transport Messages Sent:                 0
  Length of Sent Messages:                       0
  Total Blocked Messages Sent:                   0
  Length of Sent Blocked Messages:               0
  Total Non-blocked Messages Sent:               0
  Length of Sent Non-blocked Messages:           0
  Total Bytes Allocated:                         0
  Buffers Held:                                  0
  Buffers Held Peak:                             0
  Huge Buffers Requested:                        0
  Transport Frag Count:                          0
  Transport Frag Peak:                           0
  Transport Sends w/Flow Off:                    0
  Send Errs:                                     0
  Send Peer Errs:                                0
  Rcv Xform Errs:                                0
  Xmit Xform Errs:                               0
  Incompatible Messages:                         0
  Client Unbundles to Process Memory:            T
--------------------------------------------------------------------------------
Client Name            Client     Entity     Bundle
                           ID         ID       Mode
--------------------------------------------------------------------------------
Online Diags HA            14         --       Off

  Total API Messages Sent:                       0
  Total Transport Messages Sent:                 0
  Length of Sent Messages:                       0
  Total Blocked Messages Sent:                   0
  Length of Sent Blocked Messages:               0
  Total Non-blocked Messages Sent:               0
  Length of Sent Non-blocked Messages:           0
  Total Bytes Allocated:                         0
  Buffers Held:                                  0
  Buffers Held Peak:                             0
  Huge Buffers Requested:                        0
  Transport Frag Count:                          0
  Transport Frag Peak:                           0
  Transport Sends w/Flow Off:                    0
  Send Errs:                                     0
  Send Peer Errs:                                0
  Rcv Xform Errs:                                0
  Xmit Xform Errs:                               0
  Incompatible Messages:                         0
  Client Unbundles to Process Memory:            T
--------------------------------------------------------------------------------
Client Name            Client     Entity     Bundle
                           ID         ID       Mode
--------------------------------------------------------------------------------
ARP                        22         --       Off

  Total API Messages Sent:                       0
  Total Transport Messages Sent:                 0
  Length of Sent Messages:                       0
  Total Blocked Messages Sent:                   0
  Length of Sent Blocked Messages:               0
  Total Non-blocked Messages Sent:               0
  Length of Sent Non-blocked Messages:           0
  Total Bytes Allocated:                         0
  Buffers Held:                                  0
  Buffers Held Peak:                             0
  Huge Buffers Requested:                        0
  Transport Frag Count:                          0
  Transport Frag Peak:                           0
  Transport Sends w/Flow Off:                    0
  Send Errs:                                     0
  Send Peer Errs:                                0
  Rcv Xform Errs:                                0
  Xmit Xform Errs:                               0
  Incompatible Messages:                         0
  Client Unbundles to Process Memory:            T
--------------------------------------------------------------------------------
Client Name            Client     Entity     Bundle
                           ID         ID       Mode
--------------------------------------------------------------------------------
Tableid CF                 27         --       Off

  Total API Messages Sent:                       0
  Total Transport Messages Sent:                 0
  Length of Sent Messages:                       0
  Total Blocked Messages Sent:                   0
  Length of Sent Blocked Messages:               0
  Total Non-blocked Messages Sent:               0
  Length of Sent Non-blocked Messages:           0
  Total Bytes Allocated:                         0
  Buffers Held:                                  0
  Buffers Held Peak:                             0
  Huge Buffers Requested:                        0
  Transport Frag Count:                          0
  Transport Frag Peak:                           0
  Transport Sends w/Flow Off:                    0
  Send Errs:                                     0
  Send Peer Errs:                                0
  Rcv Xform Errs:                                0
  Xmit Xform Errs:                               0
  Incompatible Messages:                         0
  Client Unbundles to Process Memory:            T
--------------------------------------------------------------------------------
Client Name            Client     Entity     Bundle
                           ID         ID       Mode
--------------------------------------------------------------------------------
Event Manager              33          0       Off

  Total API Messages Sent:                       0
  Total Transport Messages Sent:                --
  Length of Sent Messages:                       0
  Total Blocked Messages Sent:                   0
  Length of Sent Blocked Messages:               0
  Total Non-blocked Messages Sent:               0
  Length of Sent Non-blocked Messages:           0
  Total Bytes Allocated:                         0
  Buffers Held:                                  0
  Buffers Held Peak:                             0
  Huge Buffers Requested:                        0
  Transport Frag Count:                          0
  Transport Frag Peak:                           0
  Transport Sends w/Flow Off:                    0
  Send Errs:                                     0
  Send Peer Errs:                                0
  Rcv Xform Errs:                                0
  Xmit Xform Errs:                               0
  Incompatible Messages:                         0
  Client Unbundles to Process Memory:            T
--------------------------------------------------------------------------------
Client Name            Client     Entity     Bundle
                           ID         ID       Mode
--------------------------------------------------------------------------------
LAN-Switch Port Mana       35          0       Off

  Total API Messages Sent:                       0
  Total Transport Messages Sent:                --
  Length of Sent Messages:                       0
  Total Blocked Messages Sent:                   0
  Length of Sent Blocked Messages:               0
  Total Non-blocked Messages Sent:               0
  Length of Sent Non-blocked Messages:           0
  Total Bytes Allocated:                         0
  Buffers Held:                                  0
  Buffers Held Peak:                             0
  Huge Buffers Requested:                        0
  Transport Frag Count:                          0
  Transport Frag Peak:                           0
  Transport Sends w/Flow Off:                    0
  Send Errs:                                     0
  Send Peer Errs:                                0
  Rcv Xform Errs:                                0
  Xmit Xform Errs:                               0
  Incompatible Messages:                         0
  Client Unbundles to Process Memory:            T
--------------------------------------------------------------------------------
Client Name            Client     Entity     Bundle
                           ID         ID       Mode
--------------------------------------------------------------------------------
LAN-Switch PAgP/LACP       36          0       Off

  Total API Messages Sent:                       0
  Total Transport Messages Sent:                --
  Length of Sent Messages:                       0
  Total Blocked Messages Sent:                   0
  Length of Sent Blocked Messages:               0
  Total Non-blocked Messages Sent:               0
  Length of Sent Non-blocked Messages:           0
  Total Bytes Allocated:                         0
  Buffers Held:                                  0
  Buffers Held Peak:                             0
  Huge Buffers Requested:                        0
  Transport Frag Count:                          0
  Transport Frag Peak:                           0
  Transport Sends w/Flow Off:                    0
  Send Errs:                                     0
  Send Peer Errs:                                0
  Rcv Xform Errs:                                0
  Xmit Xform Errs:                               0
  Incompatible Messages:                         0
  Client Unbundles to Process Memory:            T
--------------------------------------------------------------------------------
Client Name            Client     Entity     Bundle
                           ID         ID       Mode
--------------------------------------------------------------------------------
LAN-Switch VLANs           39          0       Off

  Total API Messages Sent:                       0
  Total Transport Messages Sent:                --
  Length of Sent Messages:                       0
  Total Blocked Messages Sent:                   0
  Length of Sent Blocked Messages:               0
  Total Non-blocked Messages Sent:               0
  Length of Sent Non-blocked Messages:           0
  Total Bytes Allocated:                         0
  Buffers Held:                                  0
  Buffers Held Peak:                             0
  Huge Buffers Requested:                        0
  Transport Frag Count:                          0
  Transport Frag Peak:                           0
  Transport Sends w/Flow Off:                    0
  Send Errs:                                     0
  Send Peer Errs:                                0
  Rcv Xform Errs:                                0

This example shows how to display all the CF entities.

KATANA_DOC#show checkpoint entities
                         Check Point List of Entities

 CHKPT on ACTIVE server.

--------------------------------------------------------------------------------
Entity ID         Entity Name
--------------------------------------------------------------------------------
        0         CHKPT_DEFAULT_ENTITY

  Total API Messages Sent:             0
  Total Messages Sent:                 0
  Total Sent Message Len:              0
  Total Bytes Allocated:               0
  Total Number of Members:            10

  Member(s) of entity 0 are:
    Client ID          Client Name
------------------------------------------
          168          DHCP Snooping
          167          IGMP Snooping
           41          Spanning-tree
           40          AUTH MGR CHKPT CLIEN
           39          LAN-Switch VLANs
           33          Event Manager
           35          LAN-Switch Port Mana
           36          LAN-Switch PAgP/LACP
          158          Inline Power Checkpoint

This example shows how to display the CF statistics.

KATANA_DOC#show checkpoint statistics
        IOSd Check Point Status
 CHKPT on ACTIVE server.

Number Of Msgs In Hold Q:              0
CHKPT MAX Message Size:                0
TP MAX Message Size:               65503
CHKPT Pending Msg Timer:             100 ms

  FLOW_ON  total:                      0
  FLOW_OFF total:                      0
  Current FLOW status is:             ON
  Total API Messages Sent:             0
  Total Messages Sent:                 0
  Total Sent Message Len:              0
  Total Bytes Allocated:               0
  Rcv  Msg Q Peak:                     0
  Hold Msg Q Peak:                     0
  Buffers Held Peak:                   0
  Current Buffers Held:                0
  Huge Buffers Requested:              0

show cts environment data

To display the TrustSec environment data on the AP, use the show cts environment data command:

show cts environment data

Syntax Description


This command has no arguments or keywords.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco Amsterdam 17.1.1	This command was introduced.

Examples

The following example shows the TrustSec environment data on the AP:

Device# show cts environment

CTS Environment Data
====================
Current state = COMPLETE
Last status   = Successful
Local Device SGT:
SGT tag = 0-07:Unknown
Server List Info:
Installed list: CTSServerList1-0001, 1 server(s):
Server: 8.109.0.85, port 1812, A-ID 9818EE1ECA02B7BFE359C28B30EA7E2A
Status = ALIVE
auto-test = FALSE, keywrap-enable = FALSE, idle-time = 60 mins, deadtime = 20 secs
Security Group Name Table:
0-07:Unknown
2-00:TrustSec_Devices
3-00:Network_Services
4-00:Employees
5-00:Contractors
6-00:Guests
7-00:Production_Users
8-00:Developers
9-00:Auditors
10-00:Point_of_Sale_Systems
11-02:Production_Servers
12-00:Development_Servers
13-00:Test_Servers
14-00:PCI_Servers
15-00:BYOD
16-06:BGL15
17-00:BGL12
255-00:Quarantined_Systems
Environment Data Lifetime = 86400 secs
Last update time = 11:50:49 UTC Sun Jan 9 2022
Env-data expires in   0:00:28:54 (dd:hr:mm:sec)
Env-data refreshes in 0:00:28:54 (dd:hr:mm:sec)
Cache data applied = NONE
State Machine is running

show cts role-based sgt-map all

To display the bindings of IP address and SGT source names on the AP, use the show cts role-based sgt-map all command:

show cts role-based sgt-map all

Syntax Description


This command has no arguments or keywords.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco Amsterdam 17.1.1	This command was introduced.

Examples

The following example shows the bindings of IP address and SGT source names on the AP:

Device# show cts role-based stg-map all

Active IPv4-SGT Bindings Information
IP Address                                 SGT       Source
==========================================================================
8.73.1.101                                  16      LOCAL
8.73.1.102                                  16      LOCAL
8.73.1.103                                  16      LOCAL
8.73.1.104                                  16      LOCAL
8.73.1.105                                  16      LOCAL
8.73.1.106                                  16      LOCAL
8.73.1.107                                  16      LOCAL
8.73.1.108                                  16      LOCAL
8.73.1.109                                  16      LOCAL
8.73.1.110                                  16      LOCAL
8.73.1.111                                  16      LOCAL
8.73.1.112                                  16      LOCAL
8.73.1.113                                  16      LOCAL
8.73.1.114                                  16      LOCAL
8.73.1.115                                  16      LOCAL
8.73.1.116                                  16      LOCAL
8.73.1.117                                  16      LOCAL
8.73.1.118                                  16      LOCAL
8.73.1.119                                  16      LOCAL
8.73.1.120                                  16      LOCAL
8.73.1.121                                  16      LOCAL
8.73.1.122                                  16      LOCAL
8.73.1.123                                  16      LOCAL
8.73.1.124                                  16      LOCAL
8.73.1.125                                  16      LOCAL
8.73.1.126                                  16      LOCAL
8.73.1.127                                  16      LOCAL
8.73.1.128                                  16      LOCAL
8.73.1.129                                  16      LOCAL
8.73.1.130                                  16      LOCAL
8.73.1.131                                  16      LOCAL
8.73.1.132                                  16      LOCAL
8.73.1.133                                  16      LOCAL
8.73.1.134                                  16      LOCAL
8.73.1.135                                  16      LOCAL
8.73.1.136                                  16      LOCAL
8.73.1.137                                  16      LOCAL
8.73.1.138                                  16      LOCAL
8.73.1.139                                  16      LOCAL
8.73.1.140                                  16      LOCAL
8.73.1.141                                  16      LOCAL
8.73.1.142                                  16      LOCAL
FD09:8::                                    16      LOCAL
FD09:8:73:0:4051:EB27:B4A2:F6DB             16      LOCAL
FD09:8:73:0:4C3C:1D75:81E0:DB94             16      LOCAL
FD09:8:73:0:5136:9045:9D11:E191             16      LOCAL
FD09:8:73:0:6903:B84E:5BDF:9D54             16      LOCAL
FD09:8:73:0:A9F8:7825:B07:75A8              16      LOCAL
FD09:8:73:0:B505:626B:51D7:6DB6             16      LOCAL
FD09:8:73:0:D0B4:3316:7CE9:8AE8             16      LOCAL
FD09:8:73:0:ECA8:F5E:CCF5:FFD7              16      LOCAL

IP-SGT Active Bindings Summary
============================================
Total number of LOCAL    bindings = 9
Total number of active   bindings = 9

show cts role-based counters

To clear all role-based counters on the AP, use the show cts role-based counters command:

show cts role-based counters

Syntax Description


This command has no arguments or keywords.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco Amsterdam 17.1.1	This command was introduced.

Examples

The following example shows the clear all role-based counters on the AP:

Device# show cts role-based counters

From  To   SW-Denied HW-Denied SW-Permitt HW-Permitt  SW-Monitor HW-Monitor
===========================================================================
*     *     0          0          0          178837189  0           0
16    0     0          0          0          39250482   0           0
16    16    0          52835      0          0          0           0
17    16    0          0          0          0          0           0

show flexconnect office-extend diagnostics

To display the results of the network diagnostics for all flexconnect OfficeExtend AP, use the show flexconnect office-extend diagnostics command.

show flexconnect office-extend diagnostics

Syntax Description


This command has no keywords or arguments.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Bengaluru 17.5.1	This command was introduced.

Usage Guidelines

To get periodic details for latency (current, minimum, or maximum) ensure that you enable link-latency under the ap profile, as given in the following example:

Device(config)# ap profile default-ap-profile
Device(config-ap-profile)# link-latency

If the above configuration is not in place, you will only see the following output:

Summary of OfficeExtend AP Link Latency

CAPWAP Latency Heartbeat

Current: current latency (ms)
Min: minimum latency (ms)
Max: maximum latency (ms)

Link Test

Upload: DTLS Upload (Mbps)
Latency: DTLS Link Latency (ms)
Jitter: DTLS Link Jitter (ms)

AP Name Last Latency Heartbeat from AP Current Max Min Last Link Test Run Upload Latency Jitter 
----------------------------------------------------------------------------------------------------------------------------------------
ap-18   Disabled                        -       -   -  12/04/20 11:08:58   16     3       0

Examples

This following example shows how to display the network diagnostics information for OfficeExtend AP.

Device# show flexconnect office-extend diagnostics

Summary of OfficeExtend AP Link Latency

CAPWAP Latency Heartbeat

Current: current latency (ms)
Min: minimum latency (ms)
Max: maximum latency (ms)

Link Test

Upload: DTLS Upload (Mbps)
Latency: DTLS Link Latency (ms)
Jitter: DTLS Link Jitter (ms)

AP Name Last Latency Heartbeat from AP Current Max Min Last Link Test Run Upload Latency Jitter
-----------------------------------------------------------------------------------------------
ap-18    1 minute 1 second             0        0   0  12/04/20 09:19:48  8       2       0

show flow exporter

To display flow exporter status and statistics, use the show flow exporter command in privileged EXEC mode.

show flow exporter [export-ids netflow-v9 | [name] exporter-name [statistics | templates] | statistics | templates]

Syntax Description


export-ids netflow-v9	(Optional) Displays the NetFlow Version 9 export fields that can be exported and their IDs.
name	(Optional) Specifies the name of a flow exporter.
`exporter-name`	(Optional) Name of a flow exporter that was previously configured.
statistics	(Optional) Displays statistics for all flow exporters or for the specified flow exporter.
templates	(Optional) Displays template information for all flow exporters or for the specified flow exporter.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.1	This command was introduced.

Examples

The following example displays the status and statistics for all of the flow exporters configured on a device:

Device# show flow exporter
Flow Exporter FLOW-EXPORTER-1:
  Description:              Exports to the datacenter
  Export protocol:          NetFlow Version 9
  Transport Configuration:
    Destination IP address: 192.168.0.1
    Source IP address:      192.168.0.2
    Transport Protocol:     UDP
    Destination Port:       9995
    Source Port:            55864
    DSCP:                   0x0
    TTL:                    255
    Output Features:        Used

This table describes the significant fields shown in the display:

Table 1. show flow exporter Field Descriptions
Field	Description
Flow Exporter	The name of the flow exporter that you configured.
Description	The description that you configured for the exporter, or the default description User defined.
Transport Configuration	The transport configuration fields for this exporter.
Destination IP address	The IP address of the destination host.
Source IP address	The source IP address used by the exported packets.
Transport Protocol	The transport layer protocol used by the exported packets.
Destination Port	The destination UDP port to which the exported packets are sent.
Source Port	The source UDP port from which the exported packets are sent.
DSCP	The differentiated services code point (DSCP) value.
TTL	The time-to-live value.
Output Features	Specifies whether the output-features command, which causes the output features to be run on Flexible NetFlow export packets, has been used or not.

The following example displays the status and statistics for all of the flow exporters configured on a device:

Device# show flow exporter name FLOW-EXPORTER-1 statistics
Flow Exporter FLOW-EXPORTER-1:
  Packet send statistics (last cleared 2w6d ago):
    Successfully sent:         0                     (0 bytes)

show flow interface

To display the configuration and status for an interface, use the show flow interface command in privileged EXEC mode.

show flow interface [type number]

Syntax Description


`type`	(Optional) The type of interface on which you want to display accounting configuration information.
`number`	(Optional) The number of the interface on which you want to display accounting configuration information.

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.1	This command was introduced.

Examples

The following example displays the accounting configuration on Ethernet interfaces 0/0 and 0/1:

Device# show flow interface gigabitethernet1/0/1

Interface Ethernet1/0
        monitor:         FLOW-MONITOR-1
        direction:       Output
        traffic(ip):     on
Device# show flow interface gigabitethernet1/0/2
Interface Ethernet0/0
        monitor:         FLOW-MONITOR-1
        direction:       Input
        traffic(ip):     sampler SAMPLER-2#

The table below describes the significant fields shown in the display.

Table 2. show flow interface Field Descriptions
Field	Description
Interface	The interface to which the information applies.
monitor	The name of the flow monitor that is configured on the interface.
direction:	The direction of traffic that is being monitored by the flow monitor. The possible values are: Input—Traffic is being received by the interface. Output—Traffic is being transmitted by the interface.
traffic(ip)	Indicates if the flow monitor is in normal mode or sampler mode. The possible values are: on—The flow monitor is in normal mode. sampler—The flow monitor is in sampler mode (the name of the sampler will be included in the display).

show flow monitor

To display the status and statistics for a flow monitor, use the show flow monitor command in privileged EXEC mode.

Syntax Description


name	(Optional) Specifies the name of a flow monitor.
`monitor-name`	(Optional) Name of a flow monitor that was previously configured.
cache	(Optional) Displays the contents of the cache for the flow monitor.
format	(Optional) Specifies the use of one of the format options for formatting the display output.
csv	(Optional) Displays the flow monitor cache contents in comma-separated variables (CSV) format.
record	(Optional) Displays the flow monitor cache contents in record format.
table	(Optional) Displays the flow monitor cache contents in table format.
statistics	(Optional) Displays the statistics for the flow monitor.

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.1	This command was introduced.

Usage Guidelines

The cache keyword uses the record format by default.

The uppercase field names in the display output of the show flowmonitor monitor-name cache command are key fields that uses to differentiate flows. The lowercase field names in the display output of the show flow monitor monitor-name cache command are nonkey fields from which collects values as additional data for the cache.

Examples

The following example displays the status for a flow monitor:

Device# show flow monitor FLOW-MONITOR-1
 
Flow Monitor FLOW-MONITOR-1:
  Description:       Used for basic traffic analysis
  Flow Record:       flow-record-1
  Flow Exporter:     flow-exporter-1
                     flow-exporter-2
  Cache:
    Type:              normal
    Status:            allocated
    Size:              4096 entries / 311316 bytes
    Inactive Timeout:  15 secs
    Active Timeout:    1800 secs

This table describes the significant fields shown in the display.

Table 3. show flow monitor monitor-name Field Descriptions
Field	Description
Flow Monitor	Name of the flow monitor that you configured.
Description	Description that you configured or the monitor, or the default description User defined.
Flow Record	Flow record assigned to the flow monitor.
Flow Exporter	Exporters that are assigned to the flow monitor.
Cache	Information about the cache for the flow monitor.
Type	Flow monitor cache type. The value is always normal, as it is the only supported cache type.
Status	Status of the flow monitor cache. The possible values are: allocated—The cache is allocated. being deleted—The cache is being deleted. not allocated—The cache is not allocated.
Size	Current cache size.
Inactive Timeout	Current value for the inactive timeout in seconds.
Active Timeout	Current value for the active timeout in seconds.

The following example displays the status, statistics, and data for the flow monitor named FLOW-MONITOR-1:

This table describes the significant fields shown in the display.

The following example displays the status, statistics, and data for the flow monitor named FLOW-MONITOR-1 in a table format:

The following example displays the status, statistics, and data for the flow monitor named FLOW-MONITOR-IPv6 (the cache contains IPv6 data) in record format:

The following example displays the status and statistics for a flow monitor:

show flow record

To display the status and statistics for a flow record, use the show flow record command in privileged EXEC mode.

show flow record [ [name] record-name]

Syntax Description


name	(Optional) Specifies the name of a flow record.
`record-name`	(Optional) Name of a user-defined flow record that was previously configured.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.1	This command was introduced.

Examples

The following example displays the status and statistics for FLOW-RECORD-1:

Device# show flow record FLOW-RECORD-1
flow record FLOW-RECORD-1:
  Description:        User defined
  No. of users:       0
  Total field space:  24 bytes
  Fields:
    match ipv6 destination address
    match transport source-port
    collect interface input

show interfaces

To display the administrative and operational status of all interfaces or for a specified interface, use the show interfaces command in privileged EXEC mode.

Syntax Description

interface-id

(Optional) ID of the interface. Valid interfaces include physical ports (including type, stack member , module, and port number) and port channels. The port channel range is 1 to 48.

vlan vlan-id

(Optional) VLAN identification. The range is 1 to 4094.

accounting

(Optional) Displays accounting information on the interface, including active protocols and input and output packets and octets.

Note

The display shows only packets processed in software; hardware-switched packets do not appear.

capabilities

(Optional) Displays the capabilities of all interfaces or the specified interface, including the features and options that you can configure on the interface. Though visible in the command line help, this option is not available for VLAN IDs.

module number

(Optional) Displays capabilities of all interfaces on the switch or specified stack member.

This option is not available if you entered a specific interface ID.

description

(Optional) Displays the administrative status and description set for an interface.

etherchannel

(Optional) Displays interface EtherChannel information.

flowcontrol

(Optional) Displays interface flow control information.

private-vlan mapping

(Optional) Displays private-VLAN mapping information for the VLAN switch virtual interfaces (SVIs). This keyword is not available if the switch is running the LAN base feature set.

pruning

(Optional) Displays trunk VTP pruning information for the interface.

stats

(Optional) Displays the input and output packets by switching the path for the interface.

status

(Optional) Displays the status of the interface. A status of unsupported in the Type field means that a non-Cisco small form-factor pluggable (SFP) module is inserted in the module slot.

err-disabled

(Optional) Displays interfaces in an error-disabled state.

trunk

(Optional) Displays interface trunk information. If you do not specify an interface, only information for active trunking ports appears.

Note

Though visible in the command-line help strings, the crb , fair-queue , irb , mac-accounting , precedence , random-detect , rate-limit , and shape keywords are not supported.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.1	This command was introduced.

Usage Guidelines

The show interfaces capabilities command with different keywords has these results:

Use the show interface capabilities module number command to display the capabilities of all interfaces on that in the stack. If there is no with that module number in the stack, there is no output.
Use the show interfaces interface-id capabilities to display the capabilities of the specified interface.
Use the show interfaces capabilities (with no module number or interface ID) to display the capabilities of all interfaces in the stack.

Examples

This is an example of output from the show interfaces command for an interface on stack member 3:

Device#show interfaces gigabitEthernet 0
GigabitEthernet0 is up, line protocol is up
Hardware is MEWLC management port, address is 0000.5e00.0101 (bia 0000.0000.0000)
Internet address is 20.61.1.12/16
MTU 1500 bytes, BW 1000000 Kbit/sec, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Unknown, Unknown, media type is unknown media type
output flow-control is unsupported, input flow-control is unsupported
ARP type: ARPA, ARP Timeout 04:00:00
Last input 03:06:36, output 00:00:07, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts (0 IP multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 0 multicast, 0 pause input
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 unknown protocol drops
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 pause output
0 output buffer failures, 0 output buffers swapped out

This is an example of output from the show interfaces interface description command when the interface has been described as Connects to Marketing by using the description interface configuration command:

Device# show interfaces gigabitethernet1/0/2 description
Interface                      Status         Protocol Description
Gi1/0/2                        up             down     Connects to Marketing

This is an example of output from the show interfaces interface-id pruning command when pruning is enabled in the VTP domain:

Device# show interfaces gigabitethernet1/0/2 pruning
Port 				 Vlans pruned for lack of request by neighbor
Gi1/0/2   3,4

Port 			  Vlans traffic requested of neighbor
Gi1/0/2   1-3

This is an example of output from the show interfaces stats command for a specified VLAN interface:

Device# show interfaces vlan 1 stats
Switching path    Pkts In    Chars In    Pkts Out    Chars Out
     Processor    1165354   136205310      570800     91731594
   Route cache          0           0           0            0
         Total    1165354   136205310      570800     91731594

These are examples of output from the show interfaces status command for a specific interface when private VLANs are configured. Port 22 is configured as a private-VLAN host port. It is associated with primary VLAN 20 and secondary VLAN 25:

Device# show interfaces gigabitethernet1/0/22 status
Port 						Name 					Status 					Vlan 					Duplex 					Speed					 Type
Gi1/0/22 												connected 		20,25 				a-full 					a-100 					10/100BaseTX

In this example, port 20 is configured as a private-VLAN promiscuous port. The display shows only the primary VLAN 20:

Device# show interfaces gigabitethernet1/0/20 status
Port 						Name 					Status 					Vlan 					Duplex 					Speed					 Type
Gi1/0/20 												connected 		20    				a-full 					a-100 					10/100BaseTX

This is an example of output from the show interfaces status err-disabled command. It displays the status of interfaces in the error-disabled state:

Device# show interfaces status err-disabled
Port 		   Name       Status         Reason
Gi1/0/2              err-disabled   gbic-invalid
Gi2/0/3              err-disabled   dtp-flap

This is an example of output from the show interfaces interface-id pruning command:

Device# show interfaces gigabitethernet1/0/2 pruning
Port Vlans pruned for lack of request by neighbor

Device# show interfaces gigabitethernet1/0/1 trunk
Port        Mode             Encapsulation  Status        Native vlan
Gi1/0/1     on               802.1q         other         10

Port        Vlans allowed on trunk
Gi1/0/1     none

Port        Vlans allowed and active in management domain
Gi1/0/1     none

Port        Vlans in spanning tree forwarding state and not pruned
Gi1/0/1     none

show install package

To view the install package details, use the show install package command.

show install package

Syntax Description


This command has no arguments.

Command Default

None

Command Modes

Global configuration mode

Command History


Release	Modification
Cisco IOS XE Amsterdam 17.1.1s	This command was introduced.

Examples

This example shows how to view the install package details:

Device#show install package

show install rollback

To view the package information for a rollback point, use the show install rollback command.

show install rollback

Syntax Description


This command has no arguments.

Command Default

None

Command Modes

Global configuration mode

Command History


Release	Modification
Cisco IOS XE Amsterdam 17.1.1s	This command was introduced.

Examples

This example shows how to view the package information for a rollback point:

Device#show install rollback

show install summary

To view the install manager summary, use the show install summary command.

show install summary

Syntax Description


This command has no arguments.

Command Default

None

Command Modes

Global configuration mode

Command History


Release	Modification
Cisco IOS XE Amsterdam 17.1.1s	This command was introduced.

Examples

This example shows how to view the install summary information:

Device#show install summary

show ip

To view the IP information, use the show ip command.

Syntax Description


access-lists	Lists the IP access lists
interface	Displays the IP interface status and configuration
brief	Displays the brief summary of IP status and configuration
route	Displays the IP routing table
tunnel	Displays the IP tunnel information
eogre	Displays the EoGRE tunnel information
domain	Displays the EoGRE tunnel domain information
forwarding-table	Displays the EoGRE tunnel encapsulation and decapsulation information
gateway	Displays the EoGRE tunnel gateway information
fabric	Displays the IP fabric tunnel information
summary	Displays the information for all tunnels

Command Modes

User EXEC (>)

Privileged EXEC (#)

Command History


Release	Modification
8.1.111.0	This command was introduced.

Examples

The following example shows how to view information about the lists the IP access lists:

cisco-wave2-ap# show ip access-lists

show ip nbar protocol-id

To see NBAR protocol classification ID, use the show ip nbar protocol-id command.

show ip nbar protocol-id name

Syntax Description


protocol-id	The protocol classification ID.
name	Host server name

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE 16.12.1	This command was introduced.

Examples

The following example shows how to see the NBAR protocol classification ID:

Device# show ip nbar protocol-id name

show ldap attributes

To view information about the default LDAP attribute mapping, use the show ldap attributes command.

show ldap attributes

Syntax Description


This command has no arguments.

Command Default

None

Command Modes

Global configuration

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced.

Examples

This example shows how to view information about the default LDAP attribute mapping:

Device# show ldap attributes
LDAP Attribute                     Format     AAA Attribute
==============                     ======     =============
airespaceBwDataBurstContract       Ulong      bsn-data-bandwidth-burst-contr
userPassword                       String     password
airespaceBwRealBurstContract       Ulong      bsn-realtime-bandwidth-burst-c
employeeType                       String     employee-type
airespaceServiceType               Ulong      service-type
airespaceACLName                   String     bsn-acl-name
priv-lvl                           Ulong      priv-lvl
memberOf                           String DN  supplicant-group
cn                                 String     username
airespaceDSCP                      Ulong      bsn-dscp
policyTag                          String     tag-name
airespaceQOSLevel                  Ulong      bsn-qos-level
airespace8021PType                 Ulong      bsn-8021p-type
airespaceBwRealAveContract         Ulong      bsn-realtime-bandwidth-average
airespaceVlanInterfaceName         String     bsn-vlan-interface-name
airespaceVapId                     Ulong      bsn-wlan-id
airespaceBwDataAveContract         Ulong      bsn-data-bandwidth-average-con
sAMAccountName                     String     sam-account-name
meetingContactInfo                 String     contact-info
telephoneNumber                    String     telephone-number
Map: att_map_1
department                         String DN  element-req-qos

show ldap server

To view the LDAP server state information and various other counters for the server, use the show ldap server command.

show ldap server

Syntax Description


This command has no arguments.

Command Default

None

Command Modes

Global configuration

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced.

Examples

This example shows how to view the LDAP server state information and various other counters for the server:

Device# show ldap server

show license air entities

To display information about active APs, new APs, and deleted APs in connection with a Cisco Catalyst Wireless Controller, enter the show license air entities command in privileged EXEC mode.

show license air entities { added | bulk | deleted | no-change | summary }

Syntax Description


added	Displays the list of newly reported APs. A newly added AP is one that was not listed in the last RUM report that the product instance generated.
bulk	Displays the list of all currently active APs for the product instance
deleted	Displays the list of deleted APs. A delete AP is one that was listed as active APs in the last RUM report that the product instance generated but is now disconnected.
no-change	Displays the list of APs where there has been no change in the status since the last report.
summary	Displays the RUM report generation particulars and information about active APs, new APs, and deleted APs, and indicates by when an acknowledgement (ACK) must be installed on the product instance.

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced.
Cisco IOS XE Amsterdam 17.3.2a	Command output was updated to display information relating to Smart Licensing Using Policy.

Usage Guidelines

Smart Licensing: If the software version on the device is Cisco IOS XE Amsterdam 17.3.1 or an earlier release, command output displays fields pertinent to Smart Licensing.

Smart Licensing Using Policy: If the software version on the device is Cisco IOS XE Amsterdam 17.3.2 or a later release, command output displays fields pertinent to Smart Licensing Using Policy.

Examples

For information about fields shown in the display for the show license air entities summary command, see Table 1 .

For sample output, see

Table 4. show license air entities summary Field Descriptions
Field	Description
Last license report time	When the last RUM report was generated, in the local time zone.
Upcoming license report time	When the next RUM report will be generated, in the local time zone.
No. of APs active at last report	Total number of APs listed as active APs in the last RUM report that was generated.
No. of APs newly added with last report	Number of new APs in the last RUM report that was generated. For example, if the number displayed here is 2, this means the last but one RUM report did not list these 2 APs, and are therefore newly added in the last RUM report that the product instance generated.
No. of APs deleted with last report	Total number of APs deleted as of the last RUM report that was generated. For example, if the number displayed here is 2, this means 2 APs were in the last but one RUM report, but were deleted in the last RUM report was generated.

show license air entities summary on a Cisco Catalyst 9800-L Wireless Controller

The following is sample output on a Cisco Catalyst 9800-L Wireless Controller. Note how the output on this device does not display the License Ack expected within field. Reporting requirements on all Cisco Catalyst Wireless Controllers (except Cisco Catalyst 9800-CL Wireless Controller) are as per the standard guidelines in the Smart Licensing Using Policy environment: Reporting is required if the policy (show license status ) or system messages indicate that it is.

Device# show license air entities summary 
Upcoming license report time....................: 15:13:27.403 IST Tue Oct 26 2021
No. of APs active at last report................: 1
No. of APs newly added with last report.........: 1
No. of APs deleted with last report.............: 0

show license all

To display all licensing information enter the show license all command in Privileged EXEC mode. This command displays status, authorization, UDI, and usage information, all combined.

show license all

Syntax Description


This command has no keywords or arguments

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced.
Cisco IOS XE Amsterdam 17.3.2a	Command output was updated to display information relating to Smart Licensing Using Policy. Command output no longer displays Smart Account and Virtual account information.
Cisco IOS XE Cupertino 17.7.1	The output of the command was enhanced to display the following information: RUM report statistics, in section `Usage Report Summary`. Smart Account and Virtual Account information, in section `Account Information`.

Usage Guidelines

Smart Licensing: If the software version on the device is Cisco IOS XE Amsterdam 17.3.1 or an earlier release, command output displays fields pertinent to Smart Licensing.

Smart Licensing Using Policy: If the software version on the device (also referred to as a product instance) is Cisco IOS XE Amsterdam 17.3.2 or a later release, command output displays fields pertinent to Smart Licensing Using Policy.

This command concatenates the output of other show license commands, enabling you to display different kinds of licensing information together. For field descriptions, refer to the corresponding commands in the links provided below.

The Smart Licensing Status and Account Information sections of the show license all command corresponds with the output of the show license status command.

The License Usage section of the show license all command corresponds with the output of the show license usage command.

The Product Information section of the show license all command corresponds with the output of the show license udi command.

The Agent Version section of the show license all command displays the Smart Agent version and is available only in this command.

The License Authorizations section of the show license all command corresponds with the output of the show license authorization command.

The Usage Report Summary section of the show license all command corresponds with the output in the show license tech command.

Examples

For sample output, see:

Example: show license all (Cisco Catalyst 9800-CL Wireless Controllers, 17.7.1)

Example: show license all (Cisco Catalyst 9800-CL Wireless Controllers)

Examples

The following is sample output of the show license all command, on a product instance where the software version is Cisco IOS XE Cupertino 17.7.1. Note the addition of the two new sections in this release: Account Information and Usage Report Summary:

Device# show license all

Smart Licensing Status
======================

Smart Licensing is ENABLED

Export Authorization Key:
  Features Authorized:
    <none>

Utility:
  Status: DISABLED

Smart Licensing Using Policy:
  Status: ENABLED

Account Information:
  Smart Account: Eg-SA
  Virtual Account: Eg-VA

Data Privacy:
  Sending Hostname: yes
    Callhome hostname privacy: DISABLED
    Smart Licensing hostname privacy: DISABLED
  Version privacy: DISABLED
          
Transport:
  Type: Smart
  URL: https://smartreceiver.cisco.com/licservice/license
  Proxy:  
    Not Configured
  VRF:    
    Not Configured
          
Miscellaneous:
  Custom Id: <empty>
          
Policy:   
  Policy in use: Merged from multiple sources.
  Reporting ACK required: yes (CISCO default)
  Unenforced/Non-Export Perpetual Attributes:
    First report requirement (days): 365 (CISCO default)
    Reporting frequency (days): 0 (CISCO default)
    Report on change (days): 90 (CISCO default)
  Unenforced/Non-Export Subscription Attributes:
    First report requirement (days): 90 (CISCO default)
    Reporting frequency (days): 90 (CISCO default)
    Report on change (days): 90 (CISCO default)
  Enforced (Perpetual/Subscription) License Attributes:
    First report requirement (days): 0 (CISCO default)
    Reporting frequency (days): 0 (CISCO default)
    Report on change (days): 0 (CISCO default)
  Export (Perpetual/Subscription) License Attributes:
    First report requirement (days): 0 (CISCO default)
    Reporting frequency (days): 0 (CISCO default)
    Report on change (days): 0 (CISCO default)
          
Usage Reporting:
  Last ACK received: <none>
  Next ACK deadline: <none>
  Reporting push interval: 0 (no reporting)
  Next ACK push check: <none>
  Next report push: <none>
  Last report push: <none>
  Last report file write: <none>
          
Trust Code Installed: <none>
          
License Usage
=============
          
No licenses in use
          
Product Information
===================
UDI: PID:C9800-CL-K9,SN:9KGIXIDOXFE
          
HA UDI List:
    Active:PID:C9800-CL-K9,SN:9KGIXIDOXFE
    Standby:PID:C9800-CL-K9,SN:9UBKZU955E4
          
Agent Version
=============
Smart Agent for Licensing: 5.3.14_rel/47
          
License Authorizations
======================
Overall status:
  Active: PID:C9800-CL-K9,SN:9KGIXIDOXFE
      Status: NOT INSTALLED
  Standby: PID:C9800-CL-K9,SN:9UBKZU955E4
      Status: NOT INSTALLED
          
Purchased Licenses:
  No Purchase Information Available
          
Usage Report Summary:
=====================
Total: 0,  Purged: 0
Total Acknowledged Received: 0,  Waiting for Ack: 0
Available to Report: 0  Collecting Data: 0

Examples

The following is sample output of the show license all command on a Cisco Catalyst 9800-CL Wireless Controller. Similar output is displayed on all supported Cisco Catalyst Wireless Controllers.

Device# show license all

Smart Licensing Status
======================

Smart Licensing is ENABLED
License Reservation is ENABLED

Export Authorization Key:
  Features Authorized:
    <none>

Utility:
  Status: DISABLED

Smart Licensing Using Policy:
  Status: ENABLED

Data Privacy:
  Sending Hostname: yes
    Callhome hostname privacy: DISABLED
    Smart Licensing hostname privacy: DISABLED
  Version privacy: DISABLED

Transport:
  Type: Transport Off

Miscellaneous:
  Custom Id: <empty>

Policy:
  Policy in use: Merged from multiple sources.
  Reporting ACK required: yes (CISCO default)
  Unenforced/Non-Export Perpetual Attributes:
    First report requirement (days): 365 (CISCO default)
    Reporting frequency (days): 0 (CISCO default)
    Report on change (days): 90 (CISCO default)
  Unenforced/Non-Export Subscription Attributes:
    First report requirement (days): 90 (CISCO default)
    Reporting frequency (days): 90 (CISCO default)
    Report on change (days): 90 (CISCO default)
  Enforced (Perpetual/Subscription) License Attributes:
    First report requirement (days): 0 (CISCO default)
    Reporting frequency (days): 0 (CISCO default)
    Report on change (days): 0 (CISCO default)
  Export (Perpetual/Subscription) License Attributes:
    First report requirement (days): 0 (CISCO default)
    Reporting frequency (days): 0 (CISCO default)
    Report on change (days): 0 (CISCO default)

Usage Reporting:
  Last ACK received: <none>
  Next ACK deadline: <none>
  Reporting push interval: 0 (no reporting)
  Next ACK push check: Nov 01 20:31:46 2020 IST
  Next report push: <none>
  Last report push: <none>
  Last report file write: <none>

Trust Code Installed: <none>

License Usage
=============

air-network-advantage (DNA_NWStack):
  Description: air-network-advantage
  Count: 1
  Version: 1.0
  Status: IN USE
  Export status: NOT RESTRICTED
  Feature Name: air-network-advantage
  Feature Description: air-network-advantage
  Enforcement type: NOT ENFORCED
  License type: Perpetual
  Reservation: 
    Reservation status: SPECIFIC INSTALLED
    Total reserved count: 20

air-dna-advantage (AIR-DNA-A):
  Description: air-dna-advantage
  Count: 1
  Version: 1.0
  Status: IN USE
  Export status: NOT RESTRICTED
  Feature Name: air-dna-advantage
  Feature Description: air-dna-advantage
  Enforcement type: NOT ENFORCED
  License type: Perpetual
  Reservation: 
    Reservation status: SPECIFIC INSTALLED
    Total reserved count: 20

Product Information
===================
UDI: PID:C9800-CL-K9,SN:93BBAH93MGS

HA UDI List:
    Active:PID:C9800-CL-K9,SN:93BBAH93MGS
    Standby:PID:C9800-CL-K9,SN:9XECPSUU4XN

Agent Version
=============
Smart Agent for Licensing: 5.0.6_rel/47

License Authorizations
======================
Overall status:
  Active: PID:C9800-CL-K9,SN:93BBAH93MGS
      Status: SPECIFIC INSTALLED on Nov 02 03:16:01 2020 IST
      Last Confirmation code: 102fc949
  Standby: PID:C9800-CL-K9,SN:9XECPSUU4XN
      Status: SPECIFIC INSTALLED on Nov 02 03:15:45 2020 IST
      Last Confirmation code: ad4382fe

Specified license reservations:
  Aironet DNA Advantage Term Licenses (AIR-DNA-A):
    Description: DNA Advantage for Wireless
    Total reserved count: 20
    Enforcement type: NOT ENFORCED
    Term information:
      Active: PID:C9800-CL-K9,SN:93BBAH93MGS
        Authorization type: SPECIFIC INSTALLED on Nov 02 03:15:45 2020 IST
        License type: TERM
          Start Date: 2020-OCT-14 UTC
          End Date: 2021-APR-12 UTC
          Term Count: 5
        Authorization type: SPECIFIC INSTALLED on Nov 02 03:15:45 2020 IST
        License type: TERM
          Start Date: 2020-JUN-18 UTC
          End Date: 2020-DEC-15 UTC
          Term Count: 5
      Standby: PID:C9800-CL-K9,SN:9XECPSUU4XN
        Authorization type: SPECIFIC INSTALLED on Nov 02 03:15:45 2020 IST
        License type: TERM
          Start Date: 2020-OCT-14 UTC
          End Date: 2021-APR-12 UTC
          Term Count: 10
  AP Perpetual Networkstack Advantage (DNA_NWStack):
    Description: AP Perpetual Network Stack entitled with DNA-A
    Total reserved count: 20
    Enforcement type: NOT ENFORCED
    Term information:
      Active: PID:C9800-CL-K9,SN:93BBAH93MGS
        Authorization type: SPECIFIC INSTALLED on Nov 02 03:15:45 2020 IST
        License type: TERM
          Start Date: 2020-OCT-14 UTC
          End Date: 2021-APR-12 UTC
          Term Count: 5
        Authorization type: SPECIFIC INSTALLED on Nov 02 03:15:45 2020 IST
        License type: TERM
          Start Date: 2020-JUN-18 UTC
          End Date: 2020-DEC-15 UTC
          Term Count: 5
      Standby: PID:C9800-CL-K9,SN:9XECPSUU4XN
        Authorization type: SPECIFIC INSTALLED on Nov 02 03:15:45 2020 IST
        License type: TERM
          Start Date: 2020-OCT-14 UTC
          End Date: 2021-APR-12 UTC
          Term Count: 10

Purchased Licenses:
  No Purchase Information Available

show license authorization

To display authorization-related information for (export-controlled and enforced) licenses, enter the show license authorization command in privileged EXEC mode.

show license authorization

Syntax Description


This command has no keywords or arguments

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Amsterdam 17.3.2a	This command was introduced.

Usage Guidelines

Only export-controlled or enforced licenses require authorization before use.

While there are no export-controlled or enforced licenses on Cisco Catalyst Wireless Controllers, you can use this command to display migrated SLR authorization codes.

Examples

See Table 1 for information about fields shown in the display.

See show license authorization Displaying Migrated Authorization Code for sample output.

Table 5. show license authorization Field Descriptions
Field		Description
Overall Status	Header for UDI information for all product instances in the set-up, the type of authorization that is installed, and configuration errors, if any. In a High Availability set-up, all UDIs in the set-up are listed.
	Active: Status:	The active product instance UDI, followed by the status of the authorization code installation for this UDI. If the status indicates that the authorization code is installed and there is a confirmation code, this is also displayed.
	Standby: Status:	The standby product instance UDI, followed by the status of the authorization code installation for this UDI. If the status indicates that the authorization code is installed and there is a confirmation code, this is also displayed.
	Member: Status:	The member product instance UDI, followed by the status of the authorization code installation for this UDI. If the status indicates that the authorization code is installed and there is a confirmation code, this is also displayed.
	ERROR:	Configuration errors or discrepancies in the High Availability set-up, if any.
Authorizations	Header for detailed license authorization information. All licenses, their enforcement types, and validity durations are displayed. Errors are displayed for each product instance if its authorization or mode does not match what is installed on the active. This section is displayed only if the product instance is using a license with an authorization code.
	():	License name and a shortened form of the license name.
	Description	License description.
	Total available count:	Total count of licenses that are available to consume. This includes licenses of all durations (perpetual and subscription), including expired subscription licenses, for all the product instances in a High Availability setup.
	Enforcement type	Enforcement type for the license. This may be one of the following: Enforced Not enforced Export-Controlled
	Term information:	Header providing license duration information. The following fields maybe included under this header: Active: The active product instance UDI, followed by the status of the authorization code installation for this UDI. Authorization type: Type of authorization code installed and date of installation. The type can be: SLAC, UNIVERSAL, SPECIFIED, PAK, RTU. Start Date: Displays validity start date if the license is for a specific term or time period. Start Date: Displays validity end date if the license is for a specific term or time period. Term Count: License count. Subscription ID: Displays ID if the license is for a specific term or time period. License type: License duration. This can be: SUBSCRIPTION or PERPETUAL. Standby: The standby product instance UDI, followed by the status of the authorization code installation for this UDI. Member: The member product instance UDI, followed by the status of the authorization code installation for this UDI. For more information about the duration or term of a license's validity, see <link tbd>.
Purchased Licenses	Header for license purchase information.
	Active:	The active product instance and its the UDI.
	Count:	License count.
	Description:	License description.
	License type:	License duration. This can be: SUBSCRIPTION or PERPETUAL.
	Standby:	The standby product instance UDI.
	Member:	The member product instance UDI.

Examples

The following is sample output of the show license authorization command on a Cisco Catalyst 9800-CL Wireless Controller. The Last Confirmation code: shows that SLR authorization code is available after migration. Similar output is displayed on all supported Cisco Catalyst Wireless Controllers.

Device# show license authorization
Overall status:
  Active: PID:C9800-CL-K9,SN:93BBAH93MGS
      Status: SPECIFIC INSTALLED on Nov 02 03:16:01 2020 IST
      Last Confirmation code: 102fc949
  Standby: PID:C9800-CL-K9,SN:9XECPSUU4XN
      Status: SPECIFIC INSTALLED on Nov 02 03:15:45 2020 IST
      Last Confirmation code: ad4382fe

Specified license reservations:
  Aironet DNA Advantage Term Licenses (AIR-DNA-A):
    Description: DNA Advantage for Wireless
    Total reserved count: 20
    Enforcement type: NOT ENFORCED
    Term information:
      Active: PID:C9800-CL-K9,SN:93BBAH93MGS
        Authorization type: SPECIFIC INSTALLED on Nov 02 03:15:45 2020 IST
        License type: TERM
          Start Date: 2020-OCT-14 UTC
          End Date: 2021-APR-12 UTC
          Term Count: 5
        Authorization type: SPECIFIC INSTALLED on Nov 02 03:15:45 2020 IST
        License type: TERM
          Start Date: 2020-JUN-18 UTC
          End Date: 2020-DEC-15 UTC
          Term Count: 5
      Standby: PID:C9800-CL-K9,SN:9XECPSUU4XN
        Authorization type: SPECIFIC INSTALLED on Nov 02 03:15:45 2020 IST
        License type: TERM
          Start Date: 2020-OCT-14 UTC
          End Date: 2021-APR-12 UTC
          Term Count: 10
  AP Perpetual Networkstack Advantage (DNA_NWStack):
    Description: AP Perpetual Network Stack entitled with DNA-A
    Total reserved count: 20
    Enforcement type: NOT ENFORCED
    Term information:
      Active: PID:C9800-CL-K9,SN:93BBAH93MGS
        Authorization type: SPECIFIC INSTALLED on Nov 02 03:15:45 2020 IST
        License type: TERM
          Start Date: 2020-OCT-14 UTC
          End Date: 2021-APR-12 UTC
          Term Count: 5
        Authorization type: SPECIFIC INSTALLED on Nov 02 03:15:45 2020 IST
        License type: TERM
          Start Date: 2020-JUN-18 UTC
          End Date: 2020-DEC-15 UTC
          Term Count: 5
      Standby: PID:C9800-CL-K9,SN:9XECPSUU4XN
        Authorization type: SPECIFIC INSTALLED on Nov 02 03:15:45 2020 IST
        License type: TERM
          Start Date: 2020-OCT-14 UTC
          End Date: 2021-APR-12 UTC
          Term Count: 10

Purchased Licenses:
  No Purchase Information Available

show license data conversion

To display license data conversion information, enter the show license data command in privileged EXEC mode.

show license data conversion

Syntax Description


This command has no keywords or arguments

Command Modes

Privileged EXEC (Device#)

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced.
Cisco IOS XE Amsterdam 17.3.2a	This command continues to be available with the introduction of Smart Licensing Using Policy.

Usage Guidelines

Although visible on the CLI, this command is not applicable to Cisco Catalyst Wireless Controllers.

show license eventlog

To display event logs relating to Smart Licensing Using Policy, enter the show license eventlog command in privileged EXEC mode.

show license eventlog [ days ]

Syntax Description


`days`	Enter the number of days for which you want to display event logs. The valid value range is from 0 to 2147483647.

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced.
Cisco IOS XE Amsterdam 17.3.2a	Additional events were added with the introduction of Smart Licensing Using Policy: Installation and removal of a policy Request, installation and removal of an authorization code. Installation and removal of a trust code. Addition of authorization source information for license usage.

Usage Guidelines

Smart Licensing Using Policy: If the software version on the device (also referred to as a product instance) is Cisco IOS XE Amsterdam 17.3.2a or a later release, command output displays fields pertinent to Smart Licensing Using Policy.

Smart Licensing: If the software version on the device is Cisco IOS XE Amsterdam 17.3.1 or an earlier release, command output displays fields pertinent to Smart Licensing.

show license history message

To display communication history between the product instance and CSSM or CSLU (as the case may be), enter the show license history message command in privileged EXEC mode. The output of this command is used by the technical support team, for troubleshooting.

show license history message

Syntax Description


This command has no keywords or arguments.

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Amsterdam 17.3.2a	This command was introduced.

Usage Guidelines

When you encounter an error message that you are not able to resolve, along with a copy of the message that appears on the console or in the system log, provide your Cisco technical support representative with sample output of these commands: show license tech support , show license history message , and the show platform software sl-infra privileged EXEC commands.

show license reservation

To display license reservation information, enter the show license reservation command in privileged EXEC mode.

show license reservation

Syntax Description


This command has no keywords or arguments

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced.
Cisco IOS XE Amsterdam 17.3.2a	This command continues to be available with the introduction of Smart Licensing Using Policy.

Usage Guidelines

The command continues to be available on the CLI and corresponding output is displayed, but with the introduction of Smart Licensing Using Policy, the notion of reservation is not longer applicable. Use the show license all command in privileged EXEC mode, to display migrated SLR licenses instead (the SLR authorization code is migrated to Smart Licensing Using Policy).

show license rum

To display information about Resource Utilization Measurement reports (RUM report) available on the product instance, including report IDs, the current processing state of a report, error information (if any), and to save the detailed or summarized view that is displayed, enter the show license rum command in privileged EXEC mode.

show license rum { feature { license_name | all } | id { rum_id | all } } [ detail ] [ save path ]

Syntax Description

feature { license_name | all }

Displays RUM report information based on the license name.

Specify a particular license name to display all RUM reports for that license, or use the all keyword to display all RUM reports available on the product instance.

id { rum_id | all }

Displays RUM report information based on the RUM report ID.

Specify a report ID to display information for a single report, or use the all keyword to display all RUM reports available on the product instance.

detail

Displays detailed RUM report information.

You can use this to display detailed information by license name and detailed information by RUM report ID.

save path

Saves the information that is displayed. This can be the simplified or detailed version and depends on the preceeding keywords you have entered.

Information about 200 RUM reports can be displayed. If there are more 200 RUM reports on the product instance, you can view information about all the RUM reports by saving it to a text (.txt) file.

Note

This option saves the information about RUM reports and is not for reporting purposes. It does not save the RUM report, which is an XML file containing usage information.

Command Modes

Privileged EXEC (Device#)

Command History


Release	Modification
Cisco IOS XE Cupertino 17.7.1	This command was introduced.

Usage Guidelines

A RUM report is a license usage report, which the product instance generates, to fulfil reporting requirements as specified by the policy. An acknowledgement (ACK) is a response from CSSM and provides information about the status of a RUM report. Once the ACK for a report is available on the product instance, it indicates that the corresponding RUM report is no longer required and can be deleted. You can use the show license rum command to:

Display information about the available RUM reports on the product instance - filtered by ID or license name.
Display a short summary of the information or display a detailed view of the information.
Track a RUM report throughout its lifecycle (from the time it is first generated until its acknowledgement from CSSM). By displaying the current processing state and condition of a report you can ascertain if and when there is a problem in the reporting workflow.
Save the displayed information. The CLI displays information about up to 200 reports. If there are more than 200 reports on the product instance and you want to view information about all of them, save the displayed info in a .txt file and export to the desired location to view.

To display a statistical view of RUM report information (the total number of reports on the product instance, the number of reports that have a corresponding ACK, the number of reports waiting for an ACK etc.) refer to the Usage Report Summary: section of the show license all and show license tech privileged EXEC commands.

The show license tech command also provides RUM report related information that the Cisco technical support team can use to troubleshoot, if there are problems with RUM reporting.

Examples

For information about fields shown in the display, see show-commands.html#__ and show-commands.html#__

For sample output of the show license rum command, see:

Field Name

Description

Report Id

A numeric field that identifies a RUM report. The product instance automatically assigns an ID to every RUM report it generates. An ID may be up to 20 characters long.

State

This field displays the current processing state of a RUM report, and can be only one of the following:

OPEN: This means new measurements are been added into this report.
CLOSED: This means no new measurements can be added to this report, and the report is ready for communication to CSSM.
PENDING: This is a transitional status that you may see if you display a report while it is being transmitted.
UNACK: This means the report was transmitted and is waiting for confirmation from CSSM, that it is processed.
ACK: This means the report was processed or acknowledged by CSSM and is eligible for deletion.

Flag

Indicates the condition of the RUM report, and is displayed in the form of a character. Each character represents a specific condition, and can be only one of the following values:

N: Normal; This means no errors have been detected and the report is going through normal operation.
P: Purged; This means the report was removed due to system resource limitation, and can refer to a shortage of disk space or insufficient memory. If this flag is displayed, refer to the State Change Reason field in the detailed view for more information.

E: Error; This means an error was detected in the RUM report. If this flag is displayed, refer to the detailed view for more information. Possible workflow issues include and are not limited to the following:

RUM report was dropped by CSSM. If this is the issue, the State field displays value ACK, but the State Change Reason does not change to ACKED.
RUM Report data is missing. If this is the issue, the Storage State field displays value MISSING .
Tracking information is missing. If this is the case the State field displays value UNACK and the Transaction ID field has no information.

Note

Occasional errors in RUM reports do not require any action from you and are not an indication of a problem. It is only if you see a large number of reports (greater than 10) with errors that you must contact the Cisco technical support team.

Feature Name

The name of the license that the RUM report applies to.

Table 7. show license rum (detailed view) Field Descriptions
Field Name	Description
Report Id	A numeric field that identifies a RUM report. The product instance automatically assigns an ID to every RUM report it generates. An ID may be up to 20 characters long.
Metric Name:	Shows the type of data that is recorded. For a RUM report, the only possible value is ENTITLEMENT, and refers to measurement of license usage.
Feature Name:	The name of the license that the RUM report applies to.
Metric Value	A unique identifier for the data that is recorded. This is the same as the “Entitlement Tag” in the output of the show license tech commad and it displays information about the license being tracked.
UDI	Composed of the Product ID (PID) and serial number of the product instance.
Previous Report Id:	ID of the previous RUM report that the product instance generated for a license.
Next Report Id:	The ID that the product instance will use for the next RUM report it generates for a llicense.
State:	Displays the current processing state of a RUM report. The value displayed here is always the same as the value displayed in the simplified view. For the list of possible values see show-commands.html#__above.
State Change Reason:	Displays the reason for a RUM report state change. Not all state changes provide a reason. NONE: This means the RUM report is going through its normal lifecycle (for instance, from OPEN → CLOSED → ACK). This state change reason is usually accompanied by an `N` flag (meaning Normal) in the simplified view and requires no action from you. ACKED: RUM report was processed normally by CSSM. REMOVED: RUM report was received and requested to be removed by CSSM. RELOAD: RUM report state was changed due to some type of device reload.
Start Time:	Timestamps for measurement start and measurement end for a RUM report. Together, the start time and end time provide the time duration that the measurements cover.
End Time:
Storage State:	Displays current storage state of the RUM report and can be one of the following values: EXIST: This means the data for the RUM report is located in storage. DELETED: This means the data was intentionally deleted. Refer to the `Storage State Change Reason` in the output of the show license tech command for more information about this storage state. PURGED: This means the data was deleted due to a system resource limitation. Refer to the `Storage State Change Reason` in the output of the show license tech command for more information about this storage state. MISSING: This means data is missing from storage. If reports are identified as missing, there is no recovery process.
Transaction ID:	Contains tracking information for the RUM report. This information can be either polling information or ACK import information. The Transaction Message contains the error message, if the product instance receives one when importing an ACK. The information in these fields is used by the Cisco technical support team when troubleshooting problems with RUM reports.
Transaction Message:

Examples

The following is sample output of the show license rum featurelicense-name and show license rum featurelicense-namedetail commands on a Cisco Catalyst 9500 Series Switch. Similar output is displayed on all other Catalyst switches.

The output is filtered to display all RUM reports for the DNA Advantage license, followed by a detailed view of all RUM reports for the DNA Advantage license.

Device# show license rum feature air-dna-advantage

Smart Licensing Usage Report:

====================================

Report Id,          State,    Flag, Feature Name

1638055644          CLOSED    N     air-dna-advantage

1638055646          OPEN      N     air-dna-advantage


Device# show license rum feature air-dna-advantage detail 
Smart Licensing Usage Report Detail:
====================================
Report Id: 1638055644
  Metric Name: ENTITLEMENT
  Feature Name: air-dna-advantage
  Metric Value: regid.2017-08.com.cisco.AIR-DNA-A,1.0_b6308627-3ab0-4a11-a3d9-586911a0d790
  UDI: PID:C9800-CL-K9,SN:93SZ7RXN93Y
  Previous Report Id: 0,    Next Report Id: 1638055646
  State: CLOSED,      State Change Reason: RELOAD
  Start Time: Nov 28 12:02:09 2021 UTC,      End Time: Nov 30 22:02:13 2021 UTC
  Storage State: EXIST
  Transaction ID: 0
  Transaction Message: <none>

Report Id: 1638055646
  Metric Name: ENTITLEMENT
  Feature Name: air-dna-advantage
  Metric Value: regid.2017-08.com.cisco.AIR-DNA-A,1.0_b6308627-3ab0-4a11-a3d9-586911a0d790
  UDI: PID:C9800-CL-K9,SN:93SZ7RXN93Y
  Previous Report Id: 1638055644,    Next Report Id: 0
  State: OPEN,      State Change Reason: None
  Start Time: Nov 30 23:12:56 2021 UTC,      End Time: Dec 01 02:12:56 2021 UTC
  Storage State: EXIST
  Transaction ID: 0
  Transaction Message: <none>

Examples

The following example shows you how to save the information that is displayed.

By using the feature and all keywords, the output is filtered to display all RUM reports for all licenses being used on the product instance. It is then transferred it to a TFTP location, from where it can opened, to view the information.

Device# show license rum feature all save bootflash:all-rum-stats.txt 
Device# copy tftp://10.8.0.6/bootflash:all-rum-stats.txt

show license status

To display information about licensing settings such as data privacy, policy, transport, usage reporting and trust codes, enter the show license status command in privileged EXEC mode.

show license status

Syntax Description


This command has no keywords or arguments

Command Modes

Privileged EXEC (Device#)

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced.
Cisco IOS XE Amsterdam 17.3.2a	Command output was updated to reflect new fields that are applicable to Smart Licensing Using Policy. This includes `Trust code installed:`, `Policy in use`, `Policy name:` , reporting requirements as in the policy (`Attributes:` ), and fields related to usage reporting. Command output no longer displays Smart Account and Virtual account information.
Cisco IOS XE Cupertino 17.7.1	Command output was updated to display Smart Account and Virtual account information.

Usage Guidelines

Smart Licensing: If the software version on the device is Cisco IOS XE Amsterdam 17.3.1 or an earlier release, command output displays fields pertinent to Smart Licensing.

Smart Licensing Using Policy: If the software version on the device (also referred to as a product instance) is Cisco IOS XE Amsterdam 17.3.2a or a later release, command output displays fields pertinent to Smart Licensing Using Policy.

Account Information in the output

Starting with Cisco IOS XE Cupertino 17.7.1, every ACK includes the Smart Account and Virtual Account that was reported to, in CSSM. When it receives the ACK, the product instance securely stores only the latest version of this information - as determined by the timestamp in the ACK. The Smart Account and Virtual Account information that is displayed in the Account Information section of this command's output is therefore always as per the latest available ACK on the product instance.

If a product instance is moved from one Smart Account and Virtual Account to another, the next ACK after the move will have this updated information. The output of this command is updated once this ACK is available on the product instance.

The ACK may be received directly (where the product instance is connected to CSSM), or indirectly (where the product instance is connect to CSSM through CSLU, Cisco DNA Center, or SSM On-Prem), or by manually importing the ACK (where a product instance is in an air-gapped network).

Examples

For information about the fields shown in the display, see Table 1 .

For sample output, see:

Field

Description

Utility

Header for utility settings that are configured on the product instance.

Status:

Status

Utility report:

Last attempt:

Customer Information:

The following fields are displayed:

Id:
Name:
Street
City:
State:
Country:
Postal Code:

Smart Licensing Using Policy:

Header for policy settings on the product instance.

Status:

Indicates if Smart Licensing Using Policy is enabled.

Smart Licensing Using Policy is supported starting from Cisco IOS XE Amsterdam 17.3.2 and is always enabled on supported software images.

Data Privacy:

Header for privacy settings that are configured on the product instance.

Sending Hostname:

A yes or no value which shows if the hostname is sent in usage reports.

Callhome hostname privacy:

Indicates if the Call Home feature is configured as the mode of transport for reporting. If configured, one of these values is displayed:

ENABLED
DISABLED

Smart Licensing hostname privacy:

One of these values is displayed:

ENABLED
DISABLED

Version privacy:

One of these values is displayed:

ENABLED
DISABLED

Transport:

Header for transport settings that are configured on the product instance.

Type:

Mode of transport that is in use.

Additional fields are displayed for certain transport modes. For example, if transport type is set to CSLU, the CSLU address is also displayed.

Policy:

Header for policy information that is applicable to the product instance.

Policy in use:

Policy that is applied

This can be one of the following: Cisco default, Product default, Permanent License Reservation, Specific License Reservation, PAK license, Installed on <date>, Controller.

Policy name:

Name of the policy

Reporting ACK required:

A yes or no value which specifies if the report for this product instance requires CSSM acknowledgement (ACK) or not. The default policy is always set to “yes”.

Unenforced/Non-Export Perpetual Attributes

Displays policy values for perpetual licenses.

First report requirement (days): The maximum amount of time available before the first report must be sent, followed by policy name.
Reporting frequency (days): The maximum amount of time available before the subsequent report must be sent, followed by policy name.
Report on change (days): he maximum amount of time available to send a report in case of a change in license usage, followed by policy name

Unenforced/Non-Export Subscription Attributes

Displays policy values for subscription licenses.

First report requirement (days): The maximum amount of time available before the first report must be sent, followed by policy name.
Reporting frequency (days): The maximum amount of time available before the subsequent report must be sent, followed by policy name.
Report on change (days): he maximum amount of time available to send a report in case of a change in license usage, followed by policy name

Enforced (Perpetual/Subscription) License Attributes

Displays policy values for enforced licenses.

First report requirement (days): The maximum amount of time available before the first report must be sent, followed by policy name.
Reporting frequency (days): The maximum amount of time available before the subsequent report must be sent, followed by policy name.
Report on change (days): The maximum amount of time available to send a report in case of a change in license usage, followed by policy name

Export (Perpetual/Subscription) License Attributes

Displays policy values for export-controlled licenses.

First report requirement (days): The maximum amount of time available before the first report must be sent, followed by policy name.
Reporting frequency (days): The maximum amount of time available before the subsequent report must be sent, followed by policy name.
Report on change (days): The maximum amount of time available to send a report in case of a change in license usage, followed by policy name

Miscellaneous

Header for custom ID.

Custom Id:

ID

Usage Reporting:

Header for usage reporting (RUM reports) information.

Last ACK received:

Date and time of last ACK received, in the local time zone.

Next ACK deadline:

Date and time for next ACK. If the policy states that an ACK is not requires then this field displays none.

Note

If an ACK is required and is not received by this deadline, a syslog is displayed.

Reporting Interval:

Reporting interval in days

The value displayed here depends on what you configure in the license smart usage intervalinterval_in_days and the policy value. For more information, see the corresponding Syntax Description: license smart (global config).

Next ACK push check:

Date and time when the product instance will submit the next polling request for an ACK. Date and time are in the local time zone.

This applies only to product instance- initiated communication to CSSM or CSLU. If the reporting interval is zero, or if no ACK polling is pending, then this field displays none.

Next report push:

Date and time when the product instance will send the next RUM report. Date and time are in the local time zone. If the reporting interval is zero, or if there are no pending RUM reports, then this field displays none.

Last report push:

Date and time for when the product instance sent the last RUM report. Date and time are in the local time zone.

Last report file write:

Date and time for when the product instance last saved an offline RUM report. Date and time are in the local time zone.

Last report pull:

Date and time for when usage reporting information was retrieved using data models. Date and time are in the local time zone.

Trust Code Installed:

Header for trust code-related information.

Displays date and time if trust code is installed. Date and time are in the local time zone.

If a trust code is not installed, then this field displays none.

Active:

Active product instance.

In a High Availability set-up, the the UDIs of all product instances in the set-up, along with corresponding trust code installation dates and times are displayed.

Standby:

Standby product instance.

Member:

Member product instance

show license status with Account Information (Smart Licensing Using Policy)

The following is sample output of the show license status command, on a product instance where the software version is Cisco IOS XE Cupertino 17.7.1:

Device# show license status
Utility:
  Status: DISABLED

Smart Licensing Using Policy:
  Status: ENABLED

Account Information:
  Smart Account: Eg-SA
  Virtual Account: Eg-VA

Data Privacy:
  Sending Hostname: yes
    Callhome hostname privacy: DISABLED
    Smart Licensing hostname privacy: DISABLED
  Version privacy: DISABLED

Transport:
  Type: Smart
  URL: https://smartreceiver.cisco.com/licservice/license
  Proxy:
    Not Configured
  VRF:
    Not Configured
          
Policy:   
  Policy in use: Merged from multiple sources.
  Reporting ACK required: yes (CISCO default)
  Unenforced/Non-Export Perpetual Attributes:
    First report requirement (days): 365 (CISCO default)
    Reporting frequency (days): 0 (CISCO default)
    Report on change (days): 90 (CISCO default)
  Unenforced/Non-Export Subscription Attributes:
    First report requirement (days): 90 (CISCO default)
    Reporting frequency (days): 90 (CISCO default)
    Report on change (days): 90 (CISCO default)
  Enforced (Perpetual/Subscription) License Attributes:
    First report requirement (days): 0 (CISCO default)
    Reporting frequency (days): 0 (CISCO default)
    Report on change (days): 0 (CISCO default)
  Export (Perpetual/Subscription) License Attributes:
    First report requirement (days): 0 (CISCO default)
    Reporting frequency (days): 0 (CISCO default)
    Report on change (days): 0 (CISCO default)
          
Miscellaneous:
  Custom Id: <empty>
          
Usage Reporting:
  Last ACK received: <none>
  Next ACK deadline: <none>
  Reporting push interval: 0 (no reporting)
  Next ACK push check: <none>
  Next report push: <none>
  Last report push: <none>
  Last report file write: <none>
          
Trust Code Installed: <none>

show license status with Cisco Default Policy (Smart Licensing Using Policy)

The following is sample output of the show license status command; a default is policy applied here.

Device# show license status

Utility:
  Status: DISABLED

Smart Licensing Using Policy:
  Status: ENABLED

Data Privacy:
  Sending Hostname: yes
    Callhome hostname privacy: DISABLED
    Smart Licensing hostname privacy: DISABLED
  Version privacy: DISABLED

Transport:
  Type: Smart
  URL: https://smartreceiver.cisco.com/licservice/license
  Proxy:
    Not Configured

Policy:
  Policy in use: Merged from multiple sources.
  Reporting ACK required: yes (CISCO default)
  Unenforced/Non-Export Perpetual Attributes:
    First report requirement (days): 365 (CISCO default)
    Reporting frequency (days): 0 (CISCO default)
    Report on change (days): 90 (CISCO default)
  Unenforced/Non-Export Subscription Attributes:
    First report requirement (days): 90 (CISCO default)
    Reporting frequency (days): 90 (CISCO default)
    Report on change (days): 90 (CISCO default)
  Enforced (Perpetual/Subscription) License Attributes:
    First report requirement (days): 0 (CISCO default)
    Reporting frequency (days): 0 (CISCO default)
    Report on change (days): 0 (CISCO default)
  Export (Perpetual/Subscription) License Attributes:
    First report requirement (days): 0 (CISCO default)
    Reporting frequency (days): 0 (CISCO default)
    Report on change (days): 0 (CISCO default)

Miscellaneous:
  Custom Id: <empty>

Usage Reporting:
  Last ACK received: <none>
  Next ACK deadline: <none>
  Reporting push interval: 0 (no reporting)
  Next ACK push check: <none>
  Next report push: <none>
  Last report push: <none>
  Last report file write: <none>

Trust Code Installed: <none>

show license status with Custom Policy (Smart Licensing Using Policy)

The following is sample output of the show license status command; a custom policy applied here.

Device# show license status 
Utility:
  Status: DISABLED

Smart Licensing Using Policy:
  Status: ENABLED

Data Privacy:
  Sending Hostname: yes
    Callhome hostname privacy: DISABLED
    Smart Licensing hostname privacy: DISABLED
  Version privacy: DISABLED

Transport:
  Type: Smart
  URL: https://smartreceiver.cisco.com/licservice/license
  Proxy:
    Not Configured

Policy:
  Policy in use: Installed On Nov 02 05:09:31 2020 IST
  Policy name: SLE Policy
  Reporting ACK required: yes (Customer Policy)
  Unenforced/Non-Export Perpetual Attributes:
    First report requirement (days): 60 (Customer Policy)
    Reporting frequency (days): 60 (Customer Policy)
    Report on change (days): 60 (Customer Policy)
  Unenforced/Non-Export Subscription Attributes:
    First report requirement (days): 30 (Customer Policy)
    Reporting frequency (days): 30 (Customer Policy)
    Report on change (days): 30 (Customer Policy)
  Enforced (Perpetual/Subscription) License Attributes:
    First report requirement (days): 0 (CISCO default)
    Reporting frequency (days): 90 (Customer Policy)
    Report on change (days): 90 (Customer Policy)
  Export (Perpetual/Subscription) License Attributes:
    First report requirement (days): 0 (CISCO default)
    Reporting frequency (days): 90 (Customer Policy)
    Report on change (days): 90 (Customer Policy)

Miscellaneous:
  Custom Id: <empty>

Usage Reporting:
  Last ACK received: <none>
  Next ACK deadline: <none>
  Reporting push interval: 0 (no reporting)
  Next ACK push check: <none>
  Next report push: <none>
  Last report push: <none>
  Last report file write: <none>

Trust Code Installed:
  Active: PID:C9800-CL-K9,SN:93BBAH93MGS
    INSTALLED on Nov 02 05:09:31 2020 IST
  Standby: PID:C9800-CL-K9,SN:9XECPSUU4XN
    INSTALLED on Nov 02 05:09:31 2020 IST

show license summary

To display a brief summary of license usage, which includes information about licenses being used, the count, and status, enter the show license summary command in privileged EXEC mode.

show license summary

Syntax Description


This command has no keywords or arguments

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced.
Cisco IOS XE Amsterdam 17.3.2a	Command output was updated to reflect valid license status for Smart Licensing Using Policy. Valid license statuses include: `IN USE`, `NOT IN USE`, `NOT AUTHORIZED`. Command output was also updated to remove registration and authorization information. Command output no longer displays Smart Account and Virtual account information.
Cisco IOS XE Cupertino 17.7.1	Command output was updated to display Smart Account and Virtual account information.

Usage Guidelines

Smart Licensing: If the software version on the device is Cisco IOS XE Amsterdam 17.3.1 or an earlier release, command output displays fields pertinent to Smart Licensing.

Smart Licensing Using Policy: If the software version on the device (also referred to as a product instance) is Cisco IOS XE Amsterdam 17.3.2a or a later release, command output displays fields pertinent to Smart Licensing Using Policy.

The licenses on Cisco Catalyst Wireless Controllers are never NOT AUTHORIZED, because none of the available licenses are export-controlled or enforced (Only these licenses require authorization before use).

Account Information in the output

Starting with Cisco IOS XE Cupertino 17.7.1, every ACK includes the Smart Account and Virtual Account that was reported to, in CSSM. When it receives the ACK, the product instance securely stores only the latest version of this information - as determined by the timestamp in the ACK. The Smart Account and Virtual Account information that is displayed in the Account Information section of this command's output is therefore always as per the latest available ACK on the product instance.

If a product instance is moved from one Smart Account and Virtual Account to another, the next ACK after the move will have this updated information. The output of this command is updated once this ACK is available on the product instance.

The ACK may be received directly (where the product instance is connected to CSSM), or indirectly (where the product instance is connect to CSSM through CSLU, Cisco DNA Center, or SSM On-Prem), or by manually importing the ACK (where a product instance is in an air-gapped network).

Examples

See Table 1 for information about fields shown in the display.

show license summary: IN USE (Smart Licensing Using Policy)

show license summary: NOT IN USE (Smart Licensing Using Policy)

Table 9. show license summary Field Descriptions
Field	Description
Account Information: Smart Account: Virtual Account:	The Smart Account and Virtual Account that the product instance is part of. This information is always as per the latest available ACK on the product instance. This field is displayed only if the software version on the product instance is Cisco IOS XE Cupertino 17.7.1 or a later release.
License	Name of the licenses in use
Entitlement Tag	Short name for license
Count	License count
Status	License status can be one of the following In-Use: Valid license, and in-use. Not In-Use Not Authorized: Means that the license requires installation of SLAC before use.

show license summary: IN USE (Smart Licensing Using Policy)

The following is sample output of the show license summary command, on a product instance where the software version is Cisco IOS XE Cupertino 17.7.1:

Devide# show license summary

Account Information:
  Smart Account: Eg-SA
  Virtual Account: Eg-VA

License Usage:
  License                 Entitlement Tag               Count Status
  -----------------------------------------------------------------------------
  air-network-essentials  (DNA_NWSTACK_E)                   1 IN USE
  air-dna-essentials      (AIR-DNA-E)                       1 IN USE

show license summary: NOT IN USE (Smart Licensing Using Policy)

The following is sample output of the show license summary command, where no APs have joined the controller. Current consumption (Count) is therefore zero, and the Status field shows that the licenses are NOT IN USE:

Device# show license summary

Device#show license summary
License Reservation is ENABLED

License Usage:
  License                 Entitlement Tag               Count Status
  -----------------------------------------------------------------------------
  Aironet DNA Advantag... (AIR-DNA-A)                       0 NOT IN USE
  AP Perpetual Network... (DNA_NWStack)                     0 NOT IN USE

show license tech

To display licensing information to help the technical support team to solve a problem, enter the show license tech command in privileged EXEC mode. The output for this command includes outputs of several other show license commands and more.

show license tech { data { conversion } | eventlog [ days ] | reservation | support }

show license tech { message | rum { feature { license_name | all } | id { rum_id | all } } [ detail ] [ save path ] | support }

Syntax Description


data { conversion }	Displays license data conversion information.
eventlog [ `days` ]	Displays event logs related to Smart Licensing Using Policy. For `days` , enter the number of days for which you want to display event logs. The valid value range is from 0 to 2147483647.
reservation	Displays license reservation information.
support	Displays licensing information that helps the technical support team to debug a problem.

Syntax Description

message

Displays messages concerning trust establishment, usage reporting, result polling, authorization code requests and returns, and trust synchronization.

This is the same information as displayed in the output of the show license history message command.

rum { feature { license_name | all } | id { rum_id | all } } [ detail ] [ save path ]

Displays information about Resource Utilization Measurement reports (RUM reports) on the product instance, including report IDs, the current processing state of a report, error information (if any), and an option save the displayed RUM report information.

Note

This option saves the information about RUM reports and is not for reporting purposes. It does not save the RUM report, which is an XML file containing usage information.

support

Displays licensing information that helps the technical support team to debug a problem.

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced.
Cisco IOS XE Amsterdam 17.3.2a	Command output was updated to reflect new fields that are applicable to Smart Licensing Using Policy.
Cisco IOS XE Cupertino 17.7.1	The rum keyword and additional options under this keyword were added: { feature { `license_name` \| all } \| id { `rum_id` \| all } } The output of the show license tech support command was enhanced to display the following information: RUM report information, in section `License Usage` and `Usage Report Summary`. Smart Account and Virtual account information, in section `Account Information:`. The data conversion , eventlog and reservation keywords were removed from this command. They continute to be available as separate show commands, that is, show license data , show license eventlog , and show license reservation respectively.

Usage Guidelines

Smart Licensing: If the software version on the device is Cisco IOS XE Amsterdam 17.3.1 or an earlier release, command output displays fields pertinent to Smart Licensing (whether smart licensing is enabled, all associated licensing certificates, compliance status, and so on).

Smart Licensing Using Policy: If the software version on the device (also referred to as a product instance) is Cisco IOS XE Amsterdam 17.3.2 or a later release, command output displays fields pertinent to Smart Licensing Using Policy. Note the following guidelines:

When you encounter an error message that you are not able to resolve, along with a copy of the message that appears on the console or in the system log, provide your Cisco technical support representative with sample output of these commands: show license tech support , show license history message , and the show platform software sl-infra all privileged EXEC commands.

Troubleshooting with a Support Representative

When you encounter an error message that you are not able to resolve, along with a copy of the message that appears on the console or in the system log, provide your Cisco technical support representative with sample output of these commands: show license tech support , show license history message , and the show platform software sl-infra all privileged EXEC commands.

RUM Report Information in the output

The output of the show license tech support command displays the following sections pertaining to RUM reports:

Table 1

<output truncated>
License Usage
=============
  Measurements:
    ENTITLEMENT:
      Interval: 00:15:00
      Current Value: 800
      Current Report: 1638055645       Previous: 0
 <output truncated>

Table 2

<output truncated>
Usage Report Summary:
=====================
Total: 4,  Purged: 0(0)
Total Acknowledged Received: 0,  Waiting for Ack: 0(4)
Available to Report: 4  Collecting Data: 2  
Maximum Display: 4  In Storage: 4,  MIA: 0(0)
Report Module Status: Ready

<output truncated>

The output of the show license tech rum command when used with the detail keyword, displays the following fields pertaining to RUM reports: Table 3.

The options available under the show license tech rum keyword are the same as the options available with the show license rum privileged EXEC command. The sample output that is displayed in the simplified view is also the same. But if you use the detail keyword (for example if you enter show license tech rum feature license_name detail ), the detailed view is displayed and this has a few additional fields when compared to show license rum .

<output truncated>
Smart Licensing Usage Report Detail:
====================================
Report Id: 1638055644
  Metric Name: ENTITLEMENT
  Feature Name: air-dna-advantage
  Metric Value: regid.2017-08.com.cisco.AIR-DNA-A,1.0_b6308627-3ab0-4a11-a3d9-586911a0d790
  UDI: PID:C9800-CL-K9,SN:93SZ7RXN93Y
  Previous Report Id: 0,    Next Report Id: 1638055646
  Version: 2.0
  State: CLOSED,      State Change Reason: RELOAD
  Start Time: Nov 28 12:02:09 2021 UTC,      End Time: Nov 30 22:02:13 2021 UTC
  Storage State: EXIST,  Storage State Change Reason: None
  Transaction ID: 0
  Transaction Message: <none>
  Report Size: 54880(54987)
<output truncated>

Table 10. show license tech support: Field Descriptions for Header "License Usage"
Field Name	Description
Interval:	This is a fixed measurement duration and is always 15 minutes.
Current Value:	Information about the current license count.
Current Report:	ID of the currently OPEN report for the license.
Previous:	ID of the last OPEN report for the license. This report will have state CLOSED now.

Field Name

Description

Total:

Total number of reports that the product instance has ever generated.

Note

This total does not refer to the total number of reports currently available on and being tracked by the product instance. For this you must sum up the Total Acknowledged Received: and Available to Report fields.

Purged:

The number of reports deleted due to a system resource limitation. This number includes RUM reports where the product instance no longer has tracking information.

Total Acknowledged Received:

The number of RUM reports acknowledged on this product instance.

Waiting for Ack:

The number of RUM reports waiting for an ACK. This is the total number of reports in an UNACK state, where the product instance still has tracking information.

Available to Report:

The number of RUM reports that are available to send to CSSM. This is the total number of reports in an OPEN or CLOSED state, where the product instance still has tracking information.

Collecting Data:

Number of reports where the product instance is currently collecting measurements.

Maximum Display:

Number of reports available for display in a show command's output.

In Storage:

Number of reports currently stored on the disk

MIA:

The number of reports missing.

Table 12. show license tech rum: Field Descriptions for Header "Smart Licensing Usage Report Detail"
Field Name	Description
Version:	Displays the format of the report during transmission. Starting with Cisco IOS XE Cupertino 17.7.1, RUM reports are stored in a new format that reduces processing time. This field indicates if the product instance is using the old format or the new format.
Storage State:	Indicates if a given report is currently in storage. In addition to the displaying the current storage state of the RUM report, with these possible values: EXIST, DELETED, PURGED, MISSING, if a "(1)" is displayed next to the label (`Storage State (1)`), this means the RUM report is in the older (pre-17.7.1 format) and will be processed accordingly. If the RUM report is in the new format, the field is displayed as `Storage State` - without any extra information.
Storage State Change Reason:	Displays the reason for the change in the storage state change. Not all state changes provide a reason. NONE: This means no reason was recorded for the the storage state change. PROCESSED: This means the RUM report was deleted after CISCO has processed the data. LIMIT_STORAGE: This means the RUM report was deleted because the product instance reached it's storage limit. LIMIT_TIME: This means the RUM report was deleted because the report reached the persisted time limit.
Transaction ID: Transaction Message:	If the transaction ID displays a correlation ID and an error status is displayed, the product instance displays the error code field in this section. If there are no errors, no data is displayed here.
Report Size	This field displays two numbers. The first number is the size of raw report for communication, in bytes. The second number is the disk space used for saving the report, also in bytes. The second number is displayed only if report is stored in the new format.

Examples

The following is sample output from the show license tech support command on a Cisco Catalyst 98000-CL Wireless Controller running software version Cisco IOS XE Cupertino 17.7.1:

Device# show license tech support 
Smart Licensing Tech Support info

Smart Licensing Status
======================

Smart Licensing is ENABLED

Export Authorization Key:
  Features Authorized:
    <none>

Utility:
  Status: DISABLED

Smart Licensing Using Policy:
  Status: ENABLED

Account Information:
  Smart Account: <none>
  Virtual Account: <none>

Data Privacy:
  Sending Hostname: yes
    Callhome hostname privacy: DISABLED
    Smart Licensing hostname privacy: DISABLED
  Version privacy: DISABLED
          
Transport:
  Type: Smart
  URL: https://smartreceiver.cisco.com/licservice/license
  Proxy:  
    Address: <empty>
    Port: <empty>
    Username: <empty>
    Password: <empty>
  Server Identity Check: True
  VRF: <empty>
          
Miscellaneous:
  Custom Id: <empty>
          
Policy:   
  Policy in use: Merged from multiple sources.
  Reporting ACK required: yes (CISCO default)
  Unenforced/Non-Export Perpetual Attributes:
    First report requirement (days): 365 (CISCO default)
    Reporting frequency (days): 0 (CISCO default)
    Report on change (days): 90 (CISCO default)
  Unenforced/Non-Export Subscription Attributes:
    First report requirement (days): 90 (CISCO default)
    Reporting frequency (days): 90 (CISCO default)
    Report on change (days): 90 (CISCO default)
  Enforced (Perpetual/Subscription) License Attributes:
    First report requirement (days): 0 (CISCO default)
    Reporting frequency (days): 0 (CISCO default)
    Report on change (days): 0 (CISCO default)
  Export (Perpetual/Subscription) License Attributes:
    First report requirement (days): 0 (CISCO default)
    Reporting frequency (days): 0 (CISCO default)
    Report on change (days): 0 (CISCO default)
          
Usage Reporting:
  Last ACK received: <none>
  Next ACK deadline: <none>
  Reporting push interval: 0 (no reporting) State(1) InPolicy(0)
  Next ACK push check: <none>
  Next report push: <none>
  Last report push: <none>
  Last report file write: <none>
          
License Usage
=============
Handle: 1 
  License: air-network-advantage
  Entitlement Tag: regid.2018-06.com.cisco.DNA_NWStack,1.0_e7244e71-3ad5-4608-8bf0-d12f67c80896
  Description: air-network-advantage
  Count: 0
  Version: 1.0
  Status: NOT IN USE(1)
  Status time: Oct 05 22:24:24 2021 UTC
  Request Time: None
  Export status: NOT RESTRICTED
  Feature Name: air-network-advantage
  Feature Description: air-network-advantage
  Enforcement type: NOT ENFORCED
  License type: Perpetual
  Measurements:
    ENTITLEMENT:
      Interval: 00:15:00
      Current Value: 0
      Current Report: 0       Previous: 0
  Soft Enforced: True
          
Handle: 2 
  License: air-dna-advantage
  Entitlement Tag: regid.2017-08.com.cisco.AIR-DNA-A,1.0_b6308627-3ab0-4a11-a3d9-586911a0d790
  Description: air-dna-advantage
  Count: 0
  Version: 1.0
  Status: NOT IN USE(1)
  Status time: Oct 05 22:24:24 2021 UTC
  Request Time: None
  Export status: NOT RESTRICTED
  Feature Name: air-dna-advantage
  Feature Description: air-dna-advantage
  Enforcement type: NOT ENFORCED
  License type: Subscription
  Measurements:
    ENTITLEMENT:
      Interval: 00:15:00
      Current Value: 0
      Current Report: 0       Previous: 0
  Soft Enforced: True
          
Product Information
===================
UDI: PID:C9800-CL-K9,SN:9KGIXIDOXFE
          
HA UDI List:
    Active:PID:C9800-CL-K9,SN:9KGIXIDOXFE
    Standby:PID:C9800-CL-K9,SN:9UBKZU955E4
          
Agent Version
=============
Smart Agent for Licensing: 5.3.14_rel/47
          
Upcoming Scheduled Jobs
=======================
Current time: Oct 06 00:38:46 2021 UTC
Daily: Oct 06 21:24:22 2021 UTC (20 hours, 45 minutes, 36 seconds remaining)
Authorization Renewal: Expired Not Rescheduled
Init Flag Check: Expired Not Rescheduled
Reservation configuration mismatch between nodes in HA mode: Expired Not Rescheduled
Start Utility Measurements: Oct 06 00:39:25 2021 UTC (39 seconds remaining)
Send Utility RUM reports: Oct 06 22:24:54 2021 UTC (21 hours, 46 minutes, 8 seconds remaining)
Save unreported RUM Reports: Oct 06 01:24:35 2021 UTC (45 minutes, 49 seconds remaining)
Data Synchronization: Expired Not Rescheduled
External Event: Expired Not Rescheduled
Operational Model: Expired Not Rescheduled
          
Communication Statistics:
=======================
Communication Level Allowed: INDIRECT
Overall State: Insufficient trust for direct communication
Trust Establishment:
  Attempts: Total=0, Success=0, Fail=0  Ongoing Failure: Overall=0 Communication=0
  Last Response: <none>
    Failure Reason: <none>
  Last Success Time: <none>
  Last Failure Time: <none>
Trust Acknowledgement:
  Attempts: Total=0, Success=0, Fail=0  Ongoing Failure: Overall=0 Communication=0
  Last Response: <none>
    Failure Reason: <none>
  Last Success Time: <none>
  Last Failure Time: <none>
Usage Reporting:
  Attempts: Total=0, Success=0, Fail=0  Ongoing Failure: Overall=0 Communication=0
  Last Response: <none>
    Failure Reason: <none>
  Last Success Time: <none>
  Last Failure Time: <none>
Result Polling:
  Attempts: Total=0, Success=0, Fail=0  Ongoing Failure: Overall=0 Communication=0
  Last Response: <none>
    Failure Reason: <none>
  Last Success Time: <none>
  Last Failure Time: <none>
Authorization Request:
  Attempts: Total=0, Success=0, Fail=0  Ongoing Failure: Overall=0 Communication=0
  Last Response: <none>
    Failure Reason: <none>
  Last Success Time: <none>
  Last Failure Time: <none>
Authorization Confirmation:
  Attempts: Total=0, Success=0, Fail=0  Ongoing Failure: Overall=0 Communication=0
  Last Response: <none>
    Failure Reason: <none>
  Last Success Time: <none>
  Last Failure Time: <none>
Authorization Return:
  Attempts: Total=0, Success=0, Fail=0  Ongoing Failure: Overall=0 Communication=0
  Last Response: <none>
    Failure Reason: <none>
  Last Success Time: <none>
  Last Failure Time: <none>
Trust Sync:
  Attempts: Total=0, Success=0, Fail=0  Ongoing Failure: Overall=0 Communication=0
  Last Response: <none>
    Failure Reason: <none>
  Last Success Time: <none>
  Last Failure Time: <none>
Hello Message:
  Attempts: Total=0, Success=0, Fail=0  Ongoing Failure: Overall=0 Communication=0
  Last Response: <none>
    Failure Reason: <none>
  Last Success Time: <none>
  Last Failure Time: <none>
          
License Certificates
====================
Production Cert: False
Not registered. No certificates installed
          
HA Info   
==========
RP Role: Active
Chassis Role: Active
Behavior Role: Active
RMF: True 
CF: True  
CF State: Stateless
Message Flow Allowed: False
          
Reservation Info
================ 
License reservation: DISABLED
          
Overall status:
  Active: PID:C9800-CL-K9,SN:9KGIXIDOXFE
      Reservation status: NOT INSTALLED
      Request code: <none>
      Last return code: <none>
      Last Confirmation code: <none>
      Reservation authorization code: <none>
  Standby: PID:C9800-CL-K9,SN:9UBKZU955E4
      Reservation status: NOT INSTALLED
      Request code: <none>
      Last return code: <none>
      Last Confirmation code: <none>
      Reservation authorization code: <none>
          
Specified license reservations:
          
Purchased Licenses:
  No Purchase Information Available
          
Usage Report Summary:
=====================
Total: 0,  Purged: 0(0)
Total Acknowledged Received: 0,  Waiting for Ack: 0(0)
Available to Report: 0  Collecting Data: 0  
Maximum Display: 0  In Storage: 0,  MIA: 0(0)
Report Module Status: Ready
          
Other Info
==========
Software ID: regid.2018-05.com.cisco.WLC_9500C,1.0_85665885-b865-4e32-8184-5510412fcb54
Agent State: authorized
TS enable: True
Transport: Smart
  Default URL: https://smartreceiver.cisco.com/licservice/license
Locale: en_US.UTF-8
Debug flags: 0x7
Privacy Send Hostname: True
Privacy Send IP: True
Build type:: Production
sizeof(char)  : 1
sizeof(int)   : 4
sizeof(long)  : 4
sizeof(char *): 8
sizeof(time_t): 4
sizeof(size_t): 8
Endian: Big
Write Erase Occurred: False
XOS version: 0.12.0.0
Config Persist Received: False
Message Version: 1.3
connect_info.name: <empty>
connect_info.version: <empty>
connect_info.additional: <empty>
connect_info.prod: False
connect_info.capabilities: <empty>
agent.capabilities: UTILITY, DLC, AppHA, MULTITIER, EXPORT_2, OK_TRY_AGAIN
Check Point Interface: True
Config Management Interface: False
License Map Interface: True
HA Interface: True
Trusted Store Interface: True
Platform Data Interface: True
Crypto Version 2 Interface: False
SAPluginMgmtInterfaceMutex: True
SAPluginMgmtIPDomainName: True
SmartTransportVRFSupport: True
SmartAgentClientWaitForServer: 2000
SmartAgentCmReTrySend: True
SmartAgentClientIsUnified: True
SmartAgentCmClient: True
SmartAgentClientName: UnifiedClient
builtInEncryption: True
enableOnInit: True
routingReadyByEvent: True
systemInitByEvent: True
SmartTransportServerIdCheck: True
SmartTransportProxySupport: True
SmartAgentPolicyDisplayFormat: 0
SmartAgentReportOnUpgrade: False
SmartAgentIndividualRUMEncrypt: 2
SmartAgentMaxRumMemory: 2
SmartAgentConcurrentThreadMax: 10
SmartAgentPolicyControllerModel: False
SmartAgentPolicyModel: True
SmartAgentFederalLicense: True
SmartAgentMultiTenant: False
attr365DayEvalSyslog: True
checkPointWriteOnly: False
SmartAgentDelayCertValidation: False
enableByDefault: False
conversionAutomatic: True
conversionAllowed: False
storageEncryptDisable: False
storageLoadUnencryptedDisable: False
TSPluginDisable: False
bypassUDICheck: False
loggingAddTStamp: False
loggingAddTid: True
HighAvailabilityOverrideEvent: UnknownPlatformEvent
platformIndependentOverrideEvent: UnknownPlatformEvent
platformOverrideEvent: UnknownPlatformEvent
WaitForHaRole: False
standbyIsHot: True
chkPtType: 2
delayCommInit: False
roleByEvent: True
maxTraceLength: 150
traceAlwaysOn: True
debugFlags: 0
Event log max size: 5120 KB
Event log current size: 3 KB
P:C9800-CL-K9,S:9KGIXIDOXFE: No Trust Data
P:C9800-CL-K9,S:9UBKZU955E4: No Trust Data
Overall Trust: No ID
Clock sync-ed with NTP: True
          
Platform Provided Mapping Table
===============================
  C9800-CL-K9: Total licenses found: 5
Enforced Licenses:
  P:C9800-CL-K9,S:9KGIXIDOXFE:
    No PD enforced licenses
  P:C9800-CL-K9,S:9UBKZU955E4:
    No PD enforced licenses

Example (Smart Licensing Using Policy)

The following is sample output from the show license tech support command.

Device# show license tech support 

Smart Licensing Tech Support info

Smart Licensing Status
======================

Smart Licensing is ENABLED
License Reservation is ENABLED

Registration:
  Status: REGISTERED - SPECIFIC LICENSE RESERVATION
  Export-Controlled Functionality: ALLOWED
  Initial Registration: SUCCEEDED on Nov 02 03:16:01 2020 IST

License Authorization: 
  Status: AUTHORIZED - RESERVED on Nov 02 03:16:01 2020 IST

Export Authorization Key:
  Features Authorized:
    <none>

Utility:
  Status: DISABLED

Data Privacy:
  Sending Hostname: yes
    Callhome hostname privacy: DISABLED
    Smart Licensing hostname privacy: DISABLED
  Version privacy: DISABLED

Transport:
  Type: Smart
  URL: https://smartreceiver.cisco.com/licservice/license

Evaluation Period:
  Evaluation Mode: Not In Use
  Evaluation Period Remaining: 89 days, 23 hours, 42 minutes, 47 seconds

License Usage
=============
Handle: 1
  License: AP Perpetual Networkstack Advantage
  Entitlement tag: regid.2018-06.com.cisco.DNA_NWStack,1.0_e7244e71-3ad5-4608-8bf0-d12f67c80896
  Description: AP Perpetual Network Stack entitled with DNA-A
  Count: 1
  Version: 1.0
  Status: AUTHORIZED(3)
  Status time: Nov 02 03:16:01 2020 IST
  Request Time: Nov 02 02:55:34 2020 IST
  Export status: NOT RESTRICTED
  Soft Enforced: True

Handle: 2
  License: Aironet DNA Advantage Term Licenses
  Entitlement tag: regid.2017-08.com.cisco.AIR-DNA-A,1.0_b6308627-3ab0-4a11-a3d9-586911a0d790
  Description: DNA Advantage for Wireless
  Count: 1
  Version: 1.0
  Status: AUTHORIZED(3)
  Status time: Nov 02 03:16:01 2020 IST
  Request Time: Nov 02 02:55:34 2020 IST
  Export status: NOT RESTRICTED
  Soft Enforced: True

Product Information
===================
UDI: PID:C9800-CL-K9,SN:93BBAH93MGS

HA UDI List:
    Active:PID:C9800-CL-K9,SN:93BBAH93MGS
    Standby:PID:C9800-CL-K9,SN:9XECPSUU4XN

Agent Version
=============
Smart Agent for Licensing: 4.8.7_rel/52

Upcoming Scheduled Jobs
=======================
Current time: Nov 02 03:17:23 2020 IST
Daily: Nov 03 02:47:04 2020 IST (23 hours, 29 minutes, 41 seconds remaining)
Certificate Renewal: Not Available
Certificate Expiration Check: Not Available
Authorization Renewal: Not Available
Authorization Expiration Check: Not Available
Init Flag Check: Not Available
Evaluation Expiration Check: Not Available
Ack Expiration Check: Not Available
Evaluation Expiration Warning: Not Available
IdCert Expiration Warning: Not Available
Reservation request in progress warning: Not Available
Reservation configuration mismatch between nodes in HA mode: Nov 09 03:16:30 2020 IST (6 days, 23 hours, 59 minutes, 7 seconds remaining)
Endpoint Report Request: Not Available

License Certificates
====================
Production Cert: True
Not registered. No certificates installed

HA Info
==========
RP Role: Active
Chassis Role: Active
Behavior Role: Active
RMF: True
CF: True
CF State: Stateless
Message Flow Allowed: False

Reservation Info
================ 
License reservation: ENABLED

Overall status:
  Active: PID:C9800-CL-K9,SN:93BBAH93MGS
      Reservation status: SPECIFIC INSTALLED on Nov 02 03:16:01 2020 IST
      Export-Controlled Functionality: ALLOWED
      Request code: <none>
      Last return code: <none>
      Last Confirmation code: 102fc949
      Reservation authorization code: <specificPLR><authorizationCode><flag>A</flag><version>C</version><piid>ebac0ce9-b30b-4187-8ac7-4c22a157b9b1</piid><timestamp>1604295380710</timestamp><entitlements><entitlement><tag>regid.2017-08.com.cisco.AIR-DNA-A,1.0_b6308627-3ab0-4a11-a3d9-586911a0d790</tag><count>5</count><startDate>2020-Oct-14 UTC</startDate><endDate>2021-Apr-12 UTC</endDate><licenseType>TERM</licenseType><displayName>Aironet DNA Advantage Term Licenses</displayName><tagDescription>DNA Advantage for Wireless</tagDescription><subscriptionID></subscriptionID></entitlement><entitlement><tag>regid.2017-08.com.cisco.AIR-DNA-A,1.0_b6308627-3ab0-4a11-a3d9-586911a0d790</tag><count>5</count><startDate>2020-Jun-18 UTC</startDate><endDate>2020-Dec-15 UTC</endDate><licenseType>TERM</licenseType><displayName>Aironet DNA Advantage Term Licenses</displayName><tagDescription>DNA Advantage for Wireless</tagDescription><subscriptionID></subscriptionID></entitlement><entitlement><tag>regid.2018-06.com.cisco.DNA_NWStack,1.0_e7244e71-3ad5-4608-8bf0-d12f67c80896</tag><count>5</count><startDate>2020-Oct-14 UTC</startDate><endDate>2021-Apr-12 UTC</endDate><licenseType>TERM</licenseType><displayName>AP Perpetual Networkstack Advantage</displayName><tagDescription>AP Perpetual Network Stack entitled with DNA-A</tagDescription><subscriptionID></subscriptionID></entitlement><entitlement><tag>regid.2018-06.com.cisco.DNA_NWStack,1.0_e7244e71-3ad5-4608-8bf0-d12f67c80896</tag><count>5</count><startDate>2020-Jun-18 UTC</startDate><endDate>2020-Dec-15 UTC</endDate><licenseType>TERM</licenseType><displayName>AP Perpetual Networkstack Advantage</displayName><tagDescription>AP Perpetual Network Stack entitled with DNA-A</tagDescription><subscriptionID></subscriptionID></entitlement></entitlements></authorizationCode><signature>MEUCIQCB14HM4Yd6g+ETU/AE0Vpn2QBsvDGtX9Yl6XI4fUmRAgIgJ7P84t1LVEStDlhxT/EMgC9mK1harPewk/zQDpfQ2+c=</signature><udi>P:C9800-CL-K9,S:93BBAH93MGS</udi></specificPLR>
  Standby: PID:C9800-CL-K9,SN:9XECPSUU4XN
      Reservation status: SPECIFIC INSTALLED on Nov 02 03:15:45 2020 IST
      Export-Controlled Functionality: ALLOWED
      Request code: <none>
      Last return code: <none>
      Last Confirmation code: ad4382fe
      Reservation authorization code: <specificPLR><authorizationCode><flag>A</flag><version>C</version><piid>48db0211-b970-4a70-800e-17943e90d536</piid><timestamp>1604295428976</timestamp><entitlements><entitlement><tag>regid.2018-06.com.cisco.DNA_NWStack,1.0_e7244e71-3ad5-4608-8bf0-d12f67c80896</tag><count>10</count><startDate>2020-Oct-14 UTC</startDate><endDate>2021-Apr-12 UTC</endDate><licenseType>TERM</licenseType><displayName>AP Perpetual Networkstack Advantage</displayName><tagDescription>AP Perpetual Network Stack entitled with DNA-A</tagDescription><subscriptionID></subscriptionID></entitlement><entitlement><tag>regid.2017-08.com.cisco.AIR-DNA-A,1.0_b6308627-3ab0-4a11-a3d9-586911a0d790</tag><count>10</count><startDate>2020-Oct-14 UTC</startDate><endDate>2021-Apr-12 UTC</endDate><licenseType>TERM</licenseType><displayName>Aironet DNA Advantage Term Licenses</displayName><tagDescription>DNA Advantage for Wireless</tagDescription><subscriptionID></subscriptionID></entitlement></entitlements></authorizationCode><signature>MEUCIQCoAMojN184RkvFwSN4h/hd9wu9GcIQYW/fitsvl6mrUAIgNIrNfpYq/TSq+3FfIQtLxi+NGPg//U8q3dTjQpKHPmQ=</signature><udi>P:C9800-CL-K9,S:9XECPSUU4XN</udi></specificPLR>

Specified license reservations:
  Aironet DNA Advantage Term Licenses (AIR-DNA-A):
    Description: DNA Advantage for Wireless
    Total reserved count: 20
    Term information:
      Active: PID:C9800-CL-K9,SN:93BBAH93MGS
        License type: TERM
          Start Date: 2020-OCT-14 UTC
          End Date: 2021-APR-12 UTC
          Term Count: 5
          Subscription ID: <none>
        License type: TERM
          Start Date: 2020-JUN-18 UTC
          End Date: 2020-DEC-15 UTC
          Term Count: 5
          Subscription ID: <none>
      Standby: PID:C9800-CL-K9,SN:9XECPSUU4XN
        License type: TERM
          Start Date: 2020-OCT-14 UTC
          End Date: 2021-APR-12 UTC
          Term Count: 10
          Subscription ID: <none>
  AP Perpetual Networkstack Advantage (DNA_NWStack):
    Description: AP Perpetual Network Stack entitled with DNA-A
    Total reserved count: 20
    Term information:
      Active: PID:C9800-CL-K9,SN:93BBAH93MGS
        License type: TERM
          Start Date: 2020-OCT-14 UTC
          End Date: 2021-APR-12 UTC
          Term Count: 5
          Subscription ID: <none>
        License type: TERM
          Start Date: 2020-JUN-18 UTC
          End Date: 2020-DEC-15 UTC
          Term Count: 5
          Subscription ID: <none>
      Standby: PID:C9800-CL-K9,SN:9XECPSUU4XN
        License type: TERM
          Start Date: 2020-OCT-14 UTC
          End Date: 2021-APR-12 UTC
          Term Count: 10
          Subscription ID: <none>

Other Info
==========
Software ID: regid.2018-05.com.cisco.WLC_9500C,1.0_85665885-b865-4e32-8184-5510412fcb54
Agent State: authorized
TS enable: True
Transport: Smart
  Default URL: https://smartreceiver.cisco.com/licservice/license
Locale: en_US.UTF-8
Debug flags: 0x7
Privacy Send Hostname: True
Privacy Send IP: True
Build type:: Production
sizeof(char)  : 1
sizeof(int)   : 4
sizeof(long)  : 4
sizeof(char *): 8
sizeof(time_t): 4
sizeof(size_t): 8
Endian: Big
Write Erase Occurred: False
XOS version: 0.12.0.0
Config Persist Received: False
Message Version: 1.3
connect_info.name: <empty>
connect_info.version: <empty>
connect_info.additional: <empty>
connect_info.prod: False
connect_info.capabilities: <empty>
agent.capabilities: UTILITY, DLC, AppHA, MULTITIER, EXPORT_2, OK_TRY_AGAIN
SmartAgentClientWaitForServer: 2000
SmartAgentCmReTrySend: True
SmartAgentClientIsUnified: True
SmartAgentCmClient: True
SmartAgentClientName: UnifiedClient
builtInEncryption: True
enableOnInit: True
routingReadyByEvent: True
systemInitByEvent: True
SmartAgentFederalLicense: True
SmartAgent_Crypto_Exit_CB: 0x55B353357A20
SmartAgent_Crypto_Start_CB: 0x55B353357A10
SmartAgentMultiTenant: False
attr365DayEvalSyslog: True
checkPointWriteOnly: False
SmartAgentDelayCertValidation: False
enableByDefault: False
conversionAutomatic: True
conversionAllowed: False
storageEncryptDisable: False
storageLoadUnencryptedDisable: False
TSPluginDisable: False
bypassUDICheck: False
loggingAddTStamp: False
loggingAddTid: True
platformOverrideEvent: UnknownPlatformEvent
WaitForHaRole: False
standbyIsHot: True
chkPtType: 2
delayCommInit: False
roleByEvent: True
maxTraceLength: 150
traceAlwaysOn: True
debugFlags: 0
Event log max size: 5120 KB
Event log current size: 21 KB

Platform Provided Mapping Table
===============================
<empty>

show license udi

To display Unique Device Identifier (UDI) information for a product instance, enter the show license udi command in privileged EXEC mode. In a High Availability set-up, the output displays UDI information for all connected product instances.

show license udi

Syntax Description


This command has no keywords or arguments

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced.
Cisco IOS XE Amsterdam 17.3.2a	This command continues to be available with the introduction of Smart Licensing Using Policy.

Usage Guidelines

Smart Licensing Using Policy: If the software version on the device (also referred to as a product instance) is Cisco IOS XE Amsterdam 17.3.2a or a later release, command output displays fields pertinent to Smart Licensing Using Policy.

Smart Licensing: If the software version on the device is Cisco IOS XE Amsterdam 17.3.1 or an earlier release, command output displays fields pertinent to Smart Licensing.

Examples

show license udi with Standalone Product Instance

show license udi with Active and Standby

show license udi with Standalone Product Instance

The following is sample output from the show license udi command on a standalone product instance.

Device# show license udi

UDI: PID:C9800-L-F-K9,SN:FCW2323W016

show license udi with Active and Standby

The following is sample output from the show license udi command in a High Availability set-up where an active and a standby product instances exist. UDI information is displayed for both.

Device# show license udi

UDI: PID:C9800-CL-K9,SN:93BBAH93MGS

HA UDI List:
    Active:PID:C9800-CL-K9,SN:93BBAH93MGS
    Standby:PID:C9800-CL-K9,SN:9XECPSUU4XN

show license usage

To display license usage information such as status, a count of licenses being used, and enforcement type, enter the show license usage command in privileged EXEC mode.

show license usage

Syntax Description


This command has no keywords or arguments

Command Modes

Privileged EXEC

Command History


Release	Modification
This command was introduced in a release earlier than Cisco IOS XE Amsterdam 17.3.2	This command was introduced.
Cisco IOS XE Amsterdam 17.3.2a	Command output was updated to reflect new fields that are applicable to Smart Licensing Using Policy. This includes the `Status`, `Enforcement type` fields. Command output was also updated to remove reservation related information, authorization status information, and export status information.

Usage Guidelines

Smart Licensing Using Policy: If the software version on the device (also referred to as a product instance) is Cisco IOS XE Amsterdam 17.3.2a or a later release, command output displays fields pertinent to Smart Licensing Using Policy.

Smart Licensing: If the software version on the device is Cisco IOS XE Amsterdam 17.3.1 or an earlier release, command output displays fields pertinent to Smart Licensing.

Examples

See Table 1 for information about fields shown in the display.

show license usage with unenforced licenses (Smart Licensing Using Policy)

show license usage with unenforced SLR licenses (Smart Licensing Using Policy)

Table 13. show license usage Field Descriptions
Field	Description
License Authorization: Status:	Displays overall authorization status.
():	Name of the license as in CSSM. If this license is one that requires an authorization code, the name of the license comes from the code.
Description	Description of the license as in CSSM.
Count	License count. If the license is not in-use, the count is reflected as zero.
Version	Version.
Status	License status can be one of the following In-Use: Valid license, and in-use. Not In-Use Not Authorized: Means that the license requires installation of SLAC before use. For more information, see
Export Status:	Indicates if this license is export-controlled or not. Accordingly, one of the following statuses is displayed: RESTRICTED - ALLOWED RESTRICTED - NOT ALLOWED NOT RESTRICTED
Feature name	Name of the feature that uses this license.
Feature Description:	Description of the feature that uses this license.
Utility Subscription id:	ID Not applicable, because the corresponding confiuration option is not supported.
Enforcement type	Enforcement type status for the license. This may be one of the following: ENFORCED NOT ENFORCED EXPORT RESTRICTED - ALLOWED EXPORT RESTRICTED - NOT ALLOWED For more information about enforcement types, see <link tbd>

show license usage with unenforced licenses (Smart Licensing Using Policy)

The following is sample output of the show license usage command. Unenforced licenses are in-use here.

Device# show license usage 

License Authorization: 
  Status: Not Applicable

air-network-essentials (DNA_NWSTACK_E):
  Description: air-network-essentials
  Count: 1
  Version: 1.0
  Status: IN USE
  Export status: NOT RESTRICTED
  Feature Name: air-network-essentials
  Feature Description: air-network-essentials
  Enforcement type: NOT ENFORCED
  License type: Perpetual

air-dna-essentials (AIR-DNA-E):
  Description: air-dna-essentials
  Count: 1
  Version: 1.0
  Status: IN USE
  Export status: NOT RESTRICTED
  Feature Name: air-dna-essentials
  Feature Description: air-dna-essentials
  Enforcement type: NOT ENFORCED
  License type: Perpetual

show license usage with unenforced SLR licenses (Smart Licensing Using Policy)

The following is sample output of the show license usage command. Migrated SLR licenses are in-use here:

Device# show license usage

air-network-advantage (DNA_NWStack):
  Description: air-network-advantage
  Count: 1
  Version: 1.0
  Status: IN USE
  Export status: NOT RESTRICTED
  Feature Name: air-network-advantage
  Feature Description: air-network-advantage
  Enforcement type: NOT ENFORCED
  License type: Perpetual
  Reservation: 
    Reservation status: SPECIFIC INSTALLED
    Total reserved count: 20

air-dna-advantage (AIR-DNA-A):
  Description: air-dna-advantage
  Count: 1
  Version: 1.0
  Status: IN USE
  Export status: NOT RESTRICTED
  Feature Name: air-dna-advantage
  Feature Description: air-dna-advantage
  Enforcement type: NOT ENFORCED
  License type: Perpetual
  Reservation: 
    Reservation status: SPECIFIC INSTALLED
    Total reserved count: 20

show platform software sl-infra

To display troubleshooting information and for debugging, enter the show platform software sl-infra command in privileged EXEC mode. The output of this command is used by the technical support team, for troubleshooting and debugging.

show platform software sl-infra { all | current | debug | stored }

Syntax Description


all	Displays current, debugging, and stored information.
current	Displays current license-related information.
debug	Enables debugging
stored	Displays information that is stored on the product instance.

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Amsterdam 17.3.2a	This command was introduced.

Usage Guidelines

When you encounter an error message that you are not able to resolve, along with a copy of the message that appears on the console or in the system log, provide your Cisco technical support representative with sample output of these commands: show license tech support , show license history message , and the show platform software sl-infra all privileged EXEC commands.

show platform software tls client summary

To view the TLS client summary details, use the show platform software tls client summary command.

show platform software tls client summary

Syntax Description


This command has no keywords or arguments.

Command Modes

Global configuration

Command History


Release	Modification
Cisco IOS XE Bengaluru 17.6.1	This command was introduced.

Examples

This example shows how to view the TLS client summary details:


Device # show platform software tls client summary


Name     ID     Gateway   Port   Auth     Trustpoint   DPD Time Rekey Time  Retry Time
---------------------------------------------------------------------------------------
fqdn     0                8443   PSK       N/A           60       300         20

show platform software client detail

To display a summary of TLS client session detail, session statistics, tunnel statistics, and DNS counters, use the show platform software client detail command.

show platform software client detail

Syntax Description


This command has no keywords or arguments.

Command Modes

Global configuration

Command History


Release	Modification
Cisco IOS XE Bengaluru 17.6.1	This command was introduced.

Examples

This example shows how to view the TLS client summary details:


Device # show platform software client detail

TLS Client           : Session Detail
Session Name         : fqdn
FQDN resolved IP     : 10.194.234.149
ID                   : 0
Created              : 04/20/21 00:36:42
Updated              : 04/22/21 05:56:03
State                : Up (Rekey)
Up Time              : 04/21/21 20:30:21 ( 9 hours 25 minutes 45 seconds )
Down Time            : 04/21/21 20:30:01
Rekey Time           : 04/22/21 05:55:51 ( 15 seconds )

TLS Session Statistics

Up Notifications     : 3
Down Notifications   : 2
Rekey Notifications  : 636
DP State Updates     : 0
DPD Cleanups         : 0

Packets From     Packets To  Packet Errors To     Bytes From           Bytes To
---------------------------------------------------------------------------------
  BinOS              80           0                                         0
  IOSd                0           0                    0                    0                           
  TLS Client          0           0                    0                    0                           

TLS Tunnel Statistics
Type            Tx Packets      Rx Packets
-------------------------------------------
  Total             0               80
  CSTP Ctrl      3836             3836
  CSTP Data        80                0

Type            Requests         Responses
--------------------------------------------
CSTP Cfg          639                  639
CSTP DPD         3197                 3197

Invalid CSTP Rx          : 0
Injected Packet Success  : 0
Injected Packet Failed   : 0
Consumed Packets         : 0

TLS Tunnel DNS Counters
DNS Resolve Request Success Count    : 641
DNS Resolve Request Failure Count    :  0
DNS Resolve Success Count            : 639
DNS Resolve Failure Count            :  2

show platform software tls statistics

To view the TLS client global statistic details, use the show platform software tls statistics command.

show platform software tls statistics

Syntax Description


This command has no keywords or arguments.

Command Modes

Global configuration

Command History


Release	Modification
Cisco IOS XE Bengaluru 17.6.1	This command was introduced.

Examples

This example shows how to view the TLS client summary details:


Device # show platform software tls statistics

TLS Client - Global Statistics
Session Statistics
Up/Down           : 5/2
Rekeys            : 636
DP Updates        :   0
DPD Cleanups      :   0

Packets From    Packets To   Packet Errors To     Bytes From   Bytes To
----------------------------------------------------------------------
BinOS              85             0                  0             0
IOSd 0             0              0                  0             0
TLS Client  0      0                                 0             0

Tunnel Statistics
SSL Handshake Init/Done     : 641/641
TCP Connection Req/Done     : 641/641

Tunnel Packets
Rx/Tx                       : 85/0
Injected / Failed           : 0/0
Consumed                    :  0

CSTP Packets
Control Rx/Tx               : 3839 / 3839
Data Rx/Tx                  : 0 / 85
Config Req/Resp             : 641 / 641
DPD Req/Resp                : 3198 / 3198
Invalid Rx                  : 0

FQDN Counters
Req/Resp/Success            : 0/0/0

NAT Counters
Transalte In/Out            : 0/0
Ignore    In/Out            : 0/0
Failed                      : 0
Invalid                     : 0
No Entry                    : 0
Unsupported                 : 0

Internal Counters
Type           Allocated            Freed
-------------------------------------------------
EV              1299                 1295
Tunnel           5                     4
Conn            643                   642
Sess             3                     2

Config Message Related Counters
Type               Success              Failed
-------------------------------------------------
Create                3                    0
Delete                2                    0

show platform software tls session summary

To view the tls client session summary, use the show platform software tls session summary command.

show platform software tls session summary

Syntax Description


This command has no keywords or arguments.

Command Modes

Global configuration

Command History


Release	Modification
Cisco IOS XE Bengaluru 17.6.1	This command was introduced.

Examples

This example shows how to view the TLS client summary details:


Device # show platform software tls session summary

TLS Client - Session Summary
Name     ID      Created            State    Since               Elapsed
----------------------------------------------------------------------------------------------
fqdn     0      04/20/21 00:36:42    Up     04/21/21 20:30:21   9 hours 26 minutes 44 seconds

show logging profile wireless end timestamp

To specify log filtering end location timestamp for filtering, use the show logging profile wireless end timestamp command.

show logging profile wireless end timestamp time-stamp

Syntax Description


`time-stamp`	Time to end the filtering. For example, 2017/02/10 14:41:50.849.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced.

Usage Guidelines

Ensure that you enable internal keyword using the show logging profile wireless internal command to get the trace output.

Examples

The following example shows how to specify log filtering end location timestamp for filtering:

Device# show logging profile wireless end timestamp 2017/02/10 14:41:50.849

show logging profile wireless filter

To specify filter for logs, use the show logging profile wireless filter command.

show logging profile wireless filter { ipv4| mac| string| uuid}

Syntax Description


ipv4	Selects logs with specific IP address app context.
mac	Selects logs with specific MAC app context.
string	Selects logs with specific string app context.
uuid	Selects logs with specific Universally Unique Identifier (UUID) app context.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced.

Usage Guidelines

Ensure that you enable internal keyword using the show logging profile wireless internal command to get the trace output.

Without the internal keyword, only customer curated logs are displayed.

Examples

The following example shows how to specify filter for logs:

Device# show logging profile wireless filter ipv4 10.10.11.1

show logging profile wireless fru

To specify field-replaceable unit (FRU) specific commands, use the show logging profile wireless fru command.

show logging profile wireless fru {0 {reverse | to-file}| chassis} { 0 { reverse| to-file} | chassis}

Syntax Description


0	SPA-Inter-Processor slot 0.
reverse	Shows logs in reverse chronological order.
to-file	Decodes files stored in disk and write output to file.
chassis	Chassis name.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced.

Usage Guidelines

Ensure that you enable internal keyword using the show logging profile wireless internal command to get the trace output.

Without the internal keyword, only customer curated logs are displayed.

Examples

The following example shows how to specify FRU specific commands:

Device# show logging profile wireless fru 0

show logging profile wireless internal

To select all the logs, use the show logging profile wireless internal command.

show logging profile wireless internal

Syntax Description


This command has no keywords or arguments.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced.

Usage Guidelines

Ensure that you enable internal keyword using the show logging profile wireless internal command to get the trace output.

Without the internal keyword, only customer curated logs are displayed.

Examples

The following example shows how to display all the logs:

Device# show logging profile wireless internal

show logging profile wireless level

To select logs above a specific level, use the show logging profile wireless level command.

show logging profile wireless level { debug | emergency | error | info | noise | notice | verbose | warning }

Syntax Description


debug	Selects debug messages.
emergency	Selects emergency possible messags.
error	Selects error messages.
info	Selects informational messages.
noise	Selects maximum possible messages.
notice	Selects notice messages.
verbose	Selects verbose debug messages.
warning	Selects warning messages.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced.

Usage Guidelines

Ensure that you enable internal keyword using the show logging profile wireless internal command to get the trace output.

Without the internal keyword, only customer curated logs are displayed.

Examples

The following example shows how to select logs above a specific level:

Device# show logging profile wireless level info

show logging profile wireless module

To select logs for specific modules, use the show logging profile wireless module command.

show logging profile wireless module module-name

Syntax Description


`module-name`	A comma or space separated list of module names. For example, dbal, tdllib or "dbal tdllib".

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced.

Usage Guidelines

Ensure that you enable internal keyword using the show logging profile wireless internal command to get the trace output.

Without the internal keyword, only customer curated logs are displayed.

Examples

The following example shows how to select logs for specific modules:

Device# show logging profile wireless module dbal

show logging profile wireless reverse

To view logs in reverse chronological order, use the show logging profile wireless reverse command.

show logging profile wireless reverse

Syntax Description


This command has no keywords or arguments.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced.

Usage Guidelines

Ensure that you enable internal keyword using the show logging profile wireless internal command to get the trace output.

Without the internal keyword, only customer curated logs are displayed.

Examples

The following example shows how to view logs in reverse chronological order:

Device# show logging profile wireless reverse

show logging profile wireless start

To specify log filtering start location, use the show logging profile wireless start command.

show logging profile wireless start { marker marker | timestamp time-stamp}

Syntax Description


marker	The marker to start filtering from. It must match with previously set marker.
timestamp	The timestamp for filtering. for example, "2017/02/10 14:41:50.849".

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced.

Usage Guidelines

Ensure that you enable internal keyword using the show logging profile wireless internal command to get the trace output.

Without the internal keyword, only customer curated logs are displayed.

Examples

The following example shows how to specify log filtering start location:

Device# show logging profile wireless start timestamp 2017/02/10 14:41:50.849

show logging profile wireless switch

To specify the switch to look for logs, use the show logging profile wireless switch command.

show logging profile wireless switch { switch-num | active| standby}

Syntax Description


active	Selects the active instance.
standby	Selects the standby instance.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced.

Usage Guidelines

Ensure that you enable internal keyword using the show logging profile wireless internal command to get the trace output.

Without the internal keyword, only customer curated logs are displayed.

Examples

The following example shows how to specify the number to look for logs:

Device# show logging profile wireless switch active

show logging profile wireless to-file

To decode files stored in disk and write the output to a file, use the show logging profile wireless to-file command.

show logging profile wireless to-file output-file-name

Syntax Description


`output-file-name`	Output file name. File with this name will be created in the flash memory.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced.

Usage Guidelines

Ensure that you enable internal keyword using the show logging profile wireless internal command to get the trace output.

Without the internal keyword, only customer curated logs are displayed.

Examples

The following example shows how to decode files stored in disk and write the output to a file:

Device# show logging profile wireless to-file testfile

show mdns-sd cache

To view mDNS cache details, use the show mdns-sd cache command.

show mdns-sd cache { ap-mac mac-address (H.H.H) | client-mac client-mac-address (H.H.H) | detail | glan-id <1 - 5> | location-group <0 - 4096> | mdns-ap mdns-ap mac address (H.H.H) | rlan-id <1 - 128> | statistics | type { A-AAAA | PTR | SRV | TXT } | udn { <1 - 4294967295> | shared } | wired | wlan-id <0 - 4096> }

Syntax Description


ap-mac `mac-address (H.H.H)`	Specifies the AP Ethernet MAC address.
client-mac `client-mac-address (H.H.H)`	Specifies the client MAC address.
detail	Specifes the cache in detail.
location-group `<0 - 4096>`	Specifies the location group. The value range is from 0 to 4096.
mdns-ap `mdns-ap mac address (H.H.H)`	Specifies the cache learnt from a specific mDNS AP.
rlan-id `<1 - 128>`	Specifies the remote LAN ID. The value range is from 1 - 128.
statistics	Specifies the mDNS cache statistics.
type	Specifies the mDNS record type. The record types are, A-AAAA, PTR, SRV, and TXT.
udn `<1 - 4294967295>`	Specifies the UDN ID. The value range is from 1 to 4294967295.
shared	Specifies the UDN shared services.
wired	Specifies the mDNS services from wired clients.
wlan-id `<0 - 4096>`	Specifies the WLAN ID. The value range is from 1 to 4096.

Command Default

None

Command Modes

Privileged EXEC mode

Command History


Release	Modification
Cisco IOS XE Amsterdam 17.3.1	This command was introduced.

Usage Guidelines

None

Examples

The following example shows how to view the mDNS cache details:

Device# show mdns-sd cache

show mdns-sd cache detail

To view the multicast DNS (mDNS) cache details, use the show mdns-sd cache detail command.

show mdns-sd cache detail

Syntax Description


This command has no keywords or arguments.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Amsterdam 17.1.1s	This command was introduced.

Examples

The following is sample output from the show mdns-sd cache detail command:

Device# show mdns-sd cache detail

Name: _printer._tcp.local
  Type: PTR
  TTL: 4500
  VLAN: 21
  Client MAC: ace2.d3bc.047e                  
  Remaining-Time: 4383
  mDNS Service Policy: default-mdns-service-policy
  Rdata: HP OfficeJet Pro 8720 [BC047E] (2)._printer._tcp.local

show mdns-sd cache upn shared

To view the multicast DNS (mDNS) cache user personal network shared services details, use the show mdns-sd cache upn shared command.

show mdns-sd cache upn shared

Syntax Description


This command has no keywords or arguments.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Amsterdam 17.1.1s	This command was introduced.

Examples

The following is sample output from the show mdns-sd cache upn shared command that displays the mDNS cache UPN shared services details:

Device# show mdns-sd cache upn shared

------------------------------------------------------------- PTR Records -----------------------------------------------------------------
RECORD-NAME                                    TTL      TYPE      ID    CLIENT-MAC       RR-RECORD-DATA
-------------------------------------------------------------------------------------------------------------------------------------------
9.1.1.7.5.D.E.F.F.F.6.C.7.E.2.1.0.0.0.0.0.0.0  4500     WLAN      2     10e7.c6d5.7119   HP10E7C6D57119-2860.local
_services._dns-sd._udp.local                   4500     WLAN      2     10e7.c6d5.7119   _ipps._tcp.local
_universal._sub._ipps._tcp.local               4500     WLAN      2     10e7.c6d5.7119   HP DeskJet 5000 series [D57119] (3127)._ipps._tcp.
_print._sub._ipps._tcp.local                   4500     WLAN      2     10e7.c6d5.7119   HP DeskJet 5000 series [D57119] (3127)._ipps._tcp.
_ePCL._sub._ipps._tcp.local                    4500     WLAN      2     10e7.c6d5.7119   HP DeskJet 5000 series [D57119] (3127)._ipps._tcp.
_ipps._tcp.local                               4500     WLAN      2     10e7.c6d5.7119   HP DeskJet 5000 series [D57119] (3127)._ipps._tcp.
_services._dns-sd._udp.local                   4500     WLAN      2     10e7.c6d5.7119   _ipp._tcp.local
_universal._sub._ipp._tcp.local                4500     WLAN      2     10e7.c6d5.7119   HP DeskJet 5000 series [D57119] (3127)._ipp._tcp.l
_print._sub._ipp._tcp.local                    4500     WLAN      2     10e7.c6d5.7119   HP DeskJet 5000 series [D57119] (3127)._ipp._tcp.l
_ePCL._sub._ipp._tcp.local                     4500     WLAN      2     10e7.c6d5.7119   HP DeskJet 5000 series [D57119] (3127)._ipp._tcp.l
.
.
.
------------------------------------------------------------- SRV Records -----------------------------------------------------------------
RECORD-NAME                                    TTL      TYPE      ID    CLIENT-MAC       RR-RECORD-DATA
-------------------------------------------------------------------------------------------------------------------------------------------
HP DeskJet 5000 series [D57119] (3127)._ipp._  4500     WLAN      2     10e7.c6d5.7119   0 0 631 HP10E7C6D57119-2860.local
HP DeskJet 5000 series [D57119] (3127)._http.  4500     WLAN      2     10e7.c6d5.7119   0 0 80 HP10E7C6D57119-2860.local
HP DeskJet 5000 series [D57119] (3127)._ipps.  4500     WLAN      2     10e7.c6d5.7119   0 0 631 HP10E7C6D57119-2860.local
HP DeskJet 5000 series [D57119] (3127)._uscan  4500     WLAN      2     10e7.c6d5.7119   0 0 8080 HP10E7C6D57119-2860.local
HP DeskJet 5000 series [D57119] (3127)._prive  4500     WLAN      2     10e7.c6d5.7119   0 0 80 HP10E7C6D57119-2860.local
HP DeskJet 5000 series [D57119] (3127)._uscan  4500     WLAN      2     10e7.c6d5.7119   0 0 443 HP10E7C6D57119-2860.local
HP DeskJet 5000 series [D57119] (3127)._scann  4500     WLAN      2     10e7.c6d5.7119   0 0 8080 HP10E7C6D57119-2860.local
HP DeskJet 5000 series [D57119] (3127)._pdl-d  4500     WLAN      2     10e7.c6d5.7119   0 0 9100 HP10E7C6D57119-2860.local
 
------------------------------------------------------------ A/AAAA Records ---------------------------------------------------------------
RECORD-NAME                                    TTL      TYPE      ID    CLIENT-MAC       RR-RECORD-DATA
-------------------------------------------------------------------------------------------------------------------------------------------
HP10E7C6D57119-2860.local                      4500     WLAN      2     10e7.c6d5.7119   8.16.16.99
 
------------------------------------------------------------- TXT Records -----------------------------------------------------------------
RECORD-NAME                                    TTL      TYPE      ID    CLIENT-MAC       RR-RECORD-DATA
-------------------------------------------------------------------------------------------------------------------------------------------
HP DeskJet 5000 series [D57119] (3127)._ipp._  4500     WLAN      2     10e7.c6d5.7119   [502]'txtvers=1''adminurl=http://HP10E7C6D57119-28
HP DeskJet 5000 series [D57119] (3127)._http.  4500     WLAN      2     10e7.c6d5.7119   [1]''
HP DeskJet 5000 series [D57119] (3127)._ipps.  4500     WLAN      2     10e7.c6d5.7119   [502]'txtvers=1''adminurl=http://HP10E7C6D57119-28
HP DeskJet 5000 series [D57119] (3127)._uscan  4500     WLAN      2     10e7.c6d5.7119   [280]'txtvers=1''adminurl=http://HP10E7C6D57119-28
HP DeskJet 5000 series [D57119] (3127)._prive  4500     WLAN      2     10e7.c6d5.7119   [124]'txtvers=1''ty=HP DeskJet 5000 series [D57119
HP DeskJet 5000 series [D57119] (3127)._uscan  4500     WLAN      2     10e7.c6d5.7119   [280]'txtvers=1''adminurl=http://HP10E7C6D57119-28
HP DeskJet 5000 series [D57119] (3127)._scann  4500     WLAN      2     10e7.c6d5.7119   [177]'txtvers=1''adminurl=http://HP10E7C6D57119-28
HP DeskJet 5000 series [D57119] (3127)._pdl-d  4500     WLAN      2     10e7.c6d5.7119   [211]'txtvers=1''rp=''priority=40''UUID=9fe36149-9

show mdns-sd cache upn detail

To view the multicast DNS (mDNS) cache user personal network identifier details, use the show mdns-sd cache upn detail command.

show mdns-sd cache upnupn-id detail

Syntax Description


`upn-id`	User personal network identifier.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Amsterdam 17.1.1s	This command was introduced.

Examples

The following is sample output from the show mdns-sd cache upn detail command that displays the mDNS cache UPN identifier details:

Device# show mdns-sd cache upn 777 detail

Name: _services._dns-sd._udp.local
  Type: PTR
  TTL: 4500
  WLAN: 2
  WLAN Name: mdns-psk
  VLAN: 16
  Client MAC: f4f9.51e2.a6a6                  
  AP Ethernet MAC: 002a.1087.d68a                  
  Remaining-Time: 4486
  Site-Tag: default-site-tag
  mDNS Service Policy: madhu-mDNS-Policy
  Overriding mDNS Service Policy: NO
  UPN-ID: 7777
  UPN-Status: Enabled
  Rdata: _airplay._tcp.local

show mdns-sd flexconnect summary

To view the summary of the mDNS flexconnect sites, use the show mdns-sd flexconnect summary command.

show mdns-sd flexconnect summary

Syntax Description


This command has no keywords or arguments.

Command Default

None

Command Modes

Privileged EXEC mode

Command History


Release	Modification
Cisco IOS XE Amsterdam 17.3.1	This command was introduced.

Usage Guidelines

None

Examples

The following example shows how to view the summary of mDNS flexconnect sites:

Device# show mdns-sd flexconnect summary

show mdns-sd statistics

To view the mDNS statistics, use the show mdns-sd statistics command.

show mdns-sd statistics { debug | flexconnect | rlan-id <1 - 128> wired | wlan-id <1 - 4096> }

Syntax Description


debug	Specifies the mDNS debug statistics.
flexconnect	Specifies the mDNS flexconnect statistics.
rlan-id`<1 - 128>`	Specifies the remote LAN (RLAN) ID. The value range is from 1 to 128.
wired	Specifies the mDNS wired statistics.
wlan-id`<1 - 4096>`	Specifies the WLAN ID. The value range is from 1 to 4096.

Command Default

None

Command Modes

Privileged EXEC mode

Command History


Release	Modification
Cisco IOS XE Amsterdam 17.3.1	This command was introduced.

Usage Guidelines

None

Examples

The following example shows how to view the mDNS statistics:

Device# show mdns-sd statistics

show mdns-sd summary

To view the summary of mDNS service discovery configuration, use the show mdns-sd summary command.

show mdns-sd summary

Syntax Description


This command has no keywords or arguments.

Command Default

None

Command Modes

Privileged EXEC mode

Command History


Release	Modification
Cisco IOS XE Amsterdam 17.3.1	This command was introduced.

Usage Guidelines

None

Examples

The following example shows how to view the summary of mDNS service discovery configuration:

Device# show mdns-sd summary

show mdns-sd sp-sdg statistics

To verify the Service-Peer SDG communication statistics, use the show mdns-sd sp-sdg statistics command.

show mdns-sd sp-sdg statistics

Syntax Description


This command has no keywords or arguments.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Bengaluru 17.5.1	This command was introduced.

Examples

The following example shows how to verify the Service-Peer SDG communication statistics:

Device# show mdns-sd sp-sdg statistics
                         One min, 5 mins, 1 hour
Average Input rate (pps) :    0,       0,    0
Average Output rate (pps) :   0,       0,    0
Messages sent:
Query : 0
ANY query : 0
Advertisements : 0
Advertisement Withdraw : 0
Interface down : 0
Vlan down : 0
Service-peer ID change : 0
Service-peer cache clear : 0
Resync response : 0
Keep-Alive : 1
Messages received:
Query response : 0
ANY Query response : 0
Cache-sync : 0
Get service-instance : 0
Keep-Alive response : 1

show nmsp

To display the Network Mobility Services Protocol (NMSP) configuration settings, use the show nmsp command.

show nmsp {attachment | {suppress interfaces} | capability | notification interval | statistics {connection | summary} | status | subscription detail [ ip-addr ] | summary}

Syntax Description


attachment suppress interfaces	Displays attachment suppress interfaces.
capability	Displays NMSP capabilities.
notification interval	Displays the NMSP notification interval.
statistics connection	Displays all connection-specific counters.
statistics summary	Displays the NMSP counters.
status	Displays status of active NMSP connections.
subscription detail `ip-addr`	The details are only for the NMSP services subscribed to by a specific IP address.
subscription summary	Displays details for all of the NMSP services to which the controller is subscribed. The details are only for the NMSP services subscribed to by a specific IP address.

Command Default

No default behavior or values.

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.1	This command was introduced.

Examples

The following is sample output from the show nmsp notification interval command:


Device#  show nmsp notification interval
NMSP Notification Intervals
---------------------------

RSSI Interval:
 Client               : 2 sec
 RFID                 : 2 sec
 Rogue AP             : 2 sec
 Rogue Client         : 2 sec
Attachment Interval   : 30 sec
Location Interval     : 30 sec

show nmsp cloud-services statistics

To see NMSP cloud-service statistics, use the show nmsp cloud-services statistics command.

show nmsp cloud-services statistics [ chassis {chassis-number | active | standby} R0]

Syntax Description


`chassis-number`	Chassis number as either 1 or 2.
active R0	Active instance of the active NMSP cloud services in Route-processor slot 0.
standby R0	Standby instance of the active NMSP cloud services in Route-processor slot 0.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced in a release earlier than Cisco IOS XE Gibraltar 16.10.1.

Examples

This example shows how to see NMSP cloud-service statistics:

Device# show nmsp cloud-services statistics

show nmsp cloud-services summary

To see a summary of information about NMSP cloud-services, use the show nmsp cloud-services summary command.

show nmsp cloud-services summary [ chassis {chassis-number | active | standby} R0]

Syntax Description


`chassis-number`	Chassis number as either 1 or 2.
active R0	Active instance of the NMSP cloud services in Route-processor slot 0.
standby R0	Standby instance of the active NMSP cloud services in Route-processor slot 0.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced in a release earlier than Cisco IOS XE Gibraltar 16.10.1.

Examples

This example shows how to see NMSP cloud-service summary information:

Device# show nmsp cloud-services summary

show nmsp subscription group detail all

To display the mobility services group subscription details of all CMX connections, use the show nmsp subscription group detail all command.

show nmsp subscription group detail all

Syntax Description


This command has no keywords or arguments.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced.

Examples

The following example shows how to display the mobility services group subscription details of all CMX connections:

Device# show nmsp subscription group detail all

show nmsp subscription group detail ap-list

To display the AP MAC list subscribed for a group by a CMX connection, use the show nmsp subscription group detail ap-list command.

show nmsp subscription group detail ap-list group-name cmx-IP-addrress

Syntax Description


`group-name`	CMX AP group name.
`cmx-IP-addrress`	CMX IP address.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced.

Examples

The following example shows how to verify the AP MAC list subscribed for a group by a CMX connection.

Device# show nmsp subscription group detail ap-list Group1 127.0.0.1 

CMX IP address: 127.0.0.1
CMX Group name: Group1
CMX Group AP MACs:
: 00:00:00:00:70:02  00:00:00:00:66:02  00:99:00:00:00:02  00:00:00:bb:00:02
  00:00:00:00:55:02  00:00:00:00:50:02  00:33:00:00:00:02  00:d0:00:00:00:02
  00:10:00:10:00:02  00:00:00:06:00:02  00:00:00:02:00:02  00:00:00:00:40:02
  00:00:00:99:00:02  00:00:00:00:a0:02  00:00:77:00:00:02  00:22:00:00:00:02
  00:00:00:00:00:92  00:00:00:00:00:82  00:00:00:00:03:02  aa:00:00:00:00:02
  00:00:00:50:00:42  00:00:0d:00:00:02  00:00:00:00:00:32  00:00:00:cc:00:02
  00:00:00:88:00:02  20:00:00:00:00:02  10:00:00:00:00:02  01:00:00:00:00:02
  00:00:00:00:00:02  00:00:00:00:00:01  00:00:00:00:00:00

show nmsp subscription group detail services

To display the services subscribed for a group by a CMX connection, use the show nmsp subscription group detail services command.

show nmsp subscription group detail services group-name cmx-IP-addrress

Syntax Description


`group-name`	CMX AP group name.
`cmx-IP-addrress`	CMX IP address.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced.

Examples

The following example shows how to verify the services subscribed for a group by a CMX connection.

Device# show nmsp subscription group detail services Group1 127.0.0.1 

CMX IP address: 127.0.0.1
CMX Group name: Group1
CMX Group filtered services:
Service            Subservice
-----------------------------
RSSI               Mobile Station,
Spectrum
Info
Statistics

show nmsp subscription group summary

To display the mobility services group subscription summary of all CMX connections, use the show nmsp subscription group summary command.

show nmsp subscription group summary

Syntax Description


This command has no keywords or arguments.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced.

Examples

The following example shows how to verify the mobility services group subscription summary of all CMX connections.

Device# show nmsp subscription group summary 

CMX IP address: 127.0.0.1
  Groups subscribed by this CMX server:
  Group name: Group1

show platform conditions

To see information about conditional debugs, use the show platform conditions command.

show platform conditions

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced in a release earlier than Cisco IOS XE Gibraltar 16.10.1.

Examples

The following example shows how to see information about conditional debugs:

Device# show platform conditions

show platform software wlavc status cp-exporter

To view the wireless AVC information from the control place exporter, use the show platform software wlavc status cp-exporter command.

show platform software wlavc status cp-exporter

Syntax Description


wlavc	Displays the wireless AVC information.
status	Displays information about the AVC status.
cp-exporter	Collects information from the Control Plane exporter.

Command Default

None

Command Modes

Privileged EXEC (#) mode

Command History


Release	Modification
Cisco IOS XE Amsterdam 17.2.1	This command was introduced.

Examples

This example shows how to display the wireless AVC information from the control place exporter:

show platform software wlavc status cp-exporter
AVC FNF Exporter status
IP: 10.10.1.1
connection statistics
Sent bytes : 5672
Sent packets : 569
Received records : 564
Socket statistics
New sockets : 3
Closed sockets : 0
Library statistics AVC
cache errors : 0
Unexpected Flow Monitor ID : 0
Socket creation error : 0
Sent records : 240
Received packets : 800

show platform hardware slot R0 ha_port interface stats

To see the HA port interface setting status, use the show platform hardware slot R0 ha_port interface stats command.

show platform hardware slot R0 ha_port interface stats

Syntax Description


This command has no arguments or keywords.

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Bengaluru 17.5.1	This command was introduced.

Examples

This example shows how to see the HA port interface setting status:


Device# show platform hardware slot R0 ha_port interface stats
HA Port
ha_port   Link encap:Ethernet  HWaddr 70:18:a7:c8:80:70
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Memory:e0900000-e0920000


Settings for ha_port:
        Supported ports:            [ TP ]
        Supported link modes:       10baseT/Half 10baseT/Full
                                    100baseT/Half 100baseT/Full
                                    1000baseT/Full
        Supported pause frame use:   Symmetric
        Supports auto-negotiation:   Yes
        Supported FEC modes:         Not reported
        Advertised link modes:       10baseT/Half 10baseT/Full
                                     100baseT/Half 100baseT/Full
                                     1000baseT/Full
        Advertised pause frame use:  Symmetric
        Advertised auto-negotiation: Yes
        Advertised FEC modes:        Not reported
        Speed:                       Unknown!
        Duplex:                      Unknown! (255)
        Port:                        Twisted Pair
        PHYAD:                       1
        Transceiver:                 internal
        Auto-negotiation:            on
        MDI-X:                       off (auto)
        Supports Wake-on:            pumbg
        Wake-on:                     g
        Current message level:       0x00000007 (7)
                                     drv probe link
        Link detected:               no

NIC statistics:
     rx_packets:             0
     tx_packets:             0
     rx_bytes:               0
     tx_bytes:               0
     rx_broadcast:           0
     tx_broadcast:           0
     rx_multicast:           0
     tx_multicast:           0
     multicast:              0
     collisions:             0
     rx_crc_errors:          0
     rx_no_buffer_count:     0
     rx_missed_errors:       0
     tx_aborted_errors:      0
     tx_carrier_errors:      0
     tx_window_errors:       0
     tx_abort_late_coll:     0
     tx_deferred_ok:         0
     tx_single_coll_ok:      0
     tx_multi_coll_ok:       0
     tx_timeout_count:       0
     rx_long_length_errors:  0
     rx_short_length_errors: 0
     rx_align_errors:        0
     tx_tcp_seg_good:        0
     tx_tcp_seg_failed:      0
     rx_flow_control_xon:    0
     rx_flow_control_xoff:   0
     tx_flow_control_xon:    0
     tx_flow_control_xoff:   0
     rx_long_byte_count:     0
     tx_dma_out_of_sync:     0
     tx_smbus:               0   
     rx_smbus:               0
     dropped_smbus:          0
     os2bmc_rx_by_bmc:       0
     os2bmc_tx_by_bmc:       0
     os2bmc_tx_by_host:      0
     os2bmc_rx_by_host:      0
     tx_hwtstamp_timeouts:   0
     rx_hwtstamp_cleared:    0
     rx_errors:              0
     tx_errors:              0
     tx_dropped:             0
     rx_length_errors:       0
     rx_over_errors:         0
     rx_frame_errors:        0
     rx_fifo_errors:         0
     tx_fifo_errors:         0
     tx_heartbeat_errors:    0
     tx_queue_0_packets:     0
     tx_queue_0_bytes:       0
     tx_queue_0_restart:     0
     tx_queue_1_packets:     0
     tx_queue_1_bytes:       0
     tx_queue_1_restart:     0
     rx_queue_0_packets:     0
     rx_queue_0_bytes:       0
     rx_queue_0_drops:       0
     rx_queue_0_csum_err:    0
     rx_queue_0_alloc_failed:0
     rx_queue_1_packets:     0
     rx_queue_1_bytes:       0
     rx_queue_1_drops:       0
     rx_queue_1_csum_err:    0
     rx_queue_1_alloc_failed:0

show platform software system all

To check status of the current virtual machine and look for performance issues due to inadequate resources (or other issues with the hosting environment), use the set platform software system all command in privileged EXEC mode.

show platform software system all

Syntax Description


This command has no keywords or arguments.

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced.

Examples

This example shows how to check status of the current virtual machine and its resources:

Device# show platform software system all

Processor Details
=================
Number of Processors : 6 
Processor : 1 - 6
vendor_id : GenuineIntel
cpu MHz  : 2593.750
cache size : 35840 KB
Crypto Supported : Yes
model name : Intel(R) Xeon(R) CPU E5-2690 v4 @ 2.60GHz

Memory Details
==============
Physical Memory : 16363904KB

VNIC Details
============
Name			Mac Address		Status	Platform MTU
GigabitEthernet1	000c.2964.7126		UP	1500
GigabitEthernet2	000c.2964.7130		UP	1500

Hypervisor Details
===================
Hypervisor: VMWARE
Manufacturer: VMware, Inc.
Product Name: VMware Virtual Platform
Serial Number: VMware-56 4d e5 0a a7 dd 27 2b-0e 2f 36 6e 0f 64 71 26
UUID: 564DE50A-A7DD-272B-0E2F-366E0F647126
image_variant : 

Boot Details
===================
Boot mode: BIOS
Bootloader version: 1.1

show platform software trace filter-binary

To display the most recent trace information for a specific module, use the show platform software trace filter-binary command in privileged EXEC or user EXEC mode.

show platform software trace filter-binarymodules [ context mac-address]

Syntax Description


context`mac-address`	Represents the context used to filter. Additionally, you can filter based on module names and trace levels. The context keyword accepts either a MAC address or any other argument based on which a trace is tagged.

Command Modes

User EXEC (>)

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.1	This command was introduced.

Usage Guidelines

This command collates and sorts all the logs present in the /tmp/.../ across all the processes relevant to the module. The trace logs of all the processes relevant to the specified module are printed to the console. This command also generates a file named collated_log_{system time} with the same content, in the /crashinfo/tracelogs directory.

Examples

This example shows how to display the trace information for a wireless module:


Device# show platform software trace filter-binary wireless

show platform software trace level

To view the trace levels for all the modules under a specific process, use the show platform software trace level command in privileged EXEC or user EXEC mode.

Syntax Description


`process`	Process whose tracing level is being set. Options include: chassis-manager —The Chassis Manager process. cli-agent —The CLI Agent process. cmm —The CMM process. dbm —The Database Manager process. emd —The Environmental Monitoring process. fed —The Forwarding Engine Driver process. forwarding-manager —The Forwarding Manager process. geo —The Geo Manager process. host-manager —The Host Manager process. interface-manager —The Interface Manager process. iomd —The Input/Output Module daemon (IOMd) process. ios —The IOS process. license-manager —The License Manager process. logger —The Logging Manager process. platform-mgr —The Platform Manager process. pluggable-services —The Pluggable Services process. replication-mgr —The Replication Manager process. shell-manager —The Shell Manager process. sif —The Stack Interface (SIF) Manager process. smd —The Session Manager process. stack-mgr —The Stack Manager process. table-manager —The Table Manager Server. thread-test —The Multithread Manager process. virt-manager —The Virtualization Manager process. wireless —The wireless controller module process.
`slot`	Hardware slot where the process for which the trace level is set, is running. Options include: `number` —Number of the SIP slot of the hardware module where the trace level is set. For instance, if you want to specify the SIP in SIP slot 2 of the switch, enter 2. `SIP-slot / SPA-bay`—Number of the SIP switch slot and the number of the shared port adapter (SPA) bay of that SIP. For instance, if you want to specify the SPA in bay 2 of the SIP in switch slot 3, enter 3/2. F0 —The Embedded Service Processor in slot 0. F1 —The Embedded Service Processor in slot 1. FP active —The active Embedded Service Processor. R0 —The route processor in slot 0. RP active —The active route processor. switch `<number>` —The switch, with its number specified. switch active —The active switch. switch standby —The standby switch. `number` —Number of the SIP slot of the hardware module where the trace level is set. For instance, if you want to specify the SIP in SIP slot 2 of the switch, enter 2. `SIP-slot / SPA-bay`—Number of the SIP switch slot and the number of the shared port adapter (SPA) bay of that SIP. For instance, if you want to specify the SPA in bay 2 of the SIP in switch slot 3, enter 3/2. F0 —The Embedded Service Processor in slot 0. FP active —The active Embedded Service Processor. R0 —The route processor in slot 0. RP active —The active route processor.

Command Modes

User EXEC (>)

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.1	This command was introduced.

Examples

This example shows how to view the trace level:


Device#  show platform software trace level dbm chassis active R0
Module Name                     Trace Level      
-------------------------------------------------
binos                           Notice           
binos/brand                     Notice           
bipc                            Notice           
btrace                          Notice           
bump_ptr_alloc                  Notice           
cdllib                          Notice           
chasfs                          Notice           
dbal                            Informational    
dbm                             Debug            
evlib                           Notice           
evutil                          Notice           
file_alloc                      Notice           
green-be                        Notice           
ios-avl                         Notice           
klib                            Debug            
services                        Notice           
sw_wdog                         Notice           
syshw                           Notice           
tdl_cdlcore_message             Notice           
tdl_dbal_root_message           Notice           
tdl_dbal_root_type              Notice

show platform software trace message

To display the trace messages for a process, use the set platform software trace command in privileged EXEC or user EXEC mode.

show platform software trace message process chassis{ <1-2> | active | standby} R0

Command Modes

User EXEC (>)

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.1	This command was introduced.

Examples

This example shows how to display the trace messages for the Stack Manager and the Forwarding Engine Driver processes:


Device# show platform software trace message stack-mgr switch active R0
10/30 09:42:48.767 [btrace] [8974]: (note): Successfully registered module [97] [uiutil]
10/30 09:42:48.762 [btrace] [8974]: (note): Successfully registered module [98] [tdl_cdlcore_message]
10/29 13:28:19.023 [stack_mgr] [8974]: (note): Examining peer state
10/29 13:28:19.023 [stack_mgr] [8974]: (note): no switch eligible for standby election presently
10/29 13:28:19.022 [stack_mgr] [8974]: (note): Posting event stack_fsm_event_wait_standby_elect_timer_expired, curstate stack_fsm_state_active_ready
10/29 13:28:19.022 [stack_mgr] [8974]: (note): Timer HDL - STACK_WAIT_STANDBY_ELECT_TIMER expired
10/29 13:26:46.584 [btrace] [8974]: (note): Successfully registered module [99] [tdl_ui_message]
10/29 13:26:46.582 [bipc] [8974]: (note): Pending connection to server 10.129.1.0
10/29 13:26:36.582 [evutil] [8974]: (ERR): Connection attempt for sman-ui-serv (uipeer uplink to slot 1) failed, invoking disconnect
10/29 13:26:36.582 [evutil] [8974]: (ERR): Asynchronous connect failed for [uipeer uplink to slot 1] (fd == -1)
10/29 13:26:36.581 [bipc] [8974]: (note): Pending connection to server 10.129.1.0
10/29 13:26:26.581 [evutil] [8974]: (ERR): Connection attempt for sman-ui-serv (uipeer uplink to slot 1) failed, invoking disconnect

show platform software trace message license-manager chassis active R0

To display the trace message for license-manager process of active route processor, use the show platform software trace message license-manager chassis active R0 command in privileged EXEC mode.

show platform software trace message license-managerchassis {chassis-number | active | standby}R0reverse

This command has no arguments or keywords.

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced.

Examples

This example shows how to display the trace messages for the Forwarding Engine Driver processes:


Device# show platform software trace message license-manager chassis active R0
.......
2018/06/25 07:16:53.121 {lman_R0-0}{1}: [btrace] [21231]: UUID: 0, ra: 0, TID: 0 (note): Decode of the file /tmp/rp/trace/lman_R0-0.21231_0.20180620075420.bin.copy completed in 35 msecs
/tmp/rp/trace/lman_R0-0.21231_0.20180620075420.bin.copy: DECODE(50:50:0:7)
2018/06/25 07:16:53.088 {lman_R0-0}{1}: [btrace] [21231]: UUID: 0, ra: 0, TID: 0 (note): Decode of file [/tmp/rp/trace/lman_R0-0.21231_0.20180620075420.bin.copy] returned [0]
2018/06/25 06:53:20.421 {lman_R0-0}{1}: [btrace] [21231]: UUID: 0, ra: 0, TID: 0 (note): Decode of the file /tmp/rp/trace/lman_R0-0.21231_0.20180620075420.bin.copy completed in 34 msecs
2018/06/25 06:53:20.389 {lman_R0-0}{1}: [btrace] [21231]: UUID: 0, ra: 0, TID: 0 (note): Decode of file [/tmp/rp/trace/lman_R0-0.21231_0.20180620075420.bin.copy] returned [0]
2018/06/20 07:55:10.540 {lman_R0-0}{1}: [trccfg] [21231]: UUID: 0, ra: 0, TID: 0 (note): Processing all-modules
2018/06/20 07:55:10.540 {lman_R0-0}{1}: [trccfg] [21231]: UUID: 0, ra: 0, TID: 0 (note): Empty trace conf file
2018/06/20 07:54:46.453 {lman_R0-0}{1}: [lman] [21231]: UUID: 0, ra: 0, TID: 0 (note): Constructing domain iosd_lmrp for RP/0/0 to RP/0/0
2018/06/20 07:54:46.453 {lman_R0-0}{1}: [lman] [21231]: UUID: 0, ra: 0, TID: 0 (note): Received registration msg from [IOS]
2018/06/20 07:54:46.449 {lman_R0-0}{1}: [bipc] [21231]: UUID: 0, ra: 0, TID: 0 (note): Received a connection from client for path /tmp/rp/lipc/license_mgr_socket
2018/06/20 07:54:45.557 {lman_R0-0}{1}: [lman] [21231]: UUID: 0, ra: 0, TID: 0 (ERR): The ipc information for IOS is invalid
2018/06/20 07:54:44.556 {lman_R0-0}{1}: [lman] [21231]: UUID: 0, ra: 0, TID: 0 (ERR): The ipc information for IOS is invalid
2018/06/20 07:54:43.556 {lman_R0-0}{1}: [lman] [21231]: UUID: 0, ra: 0, TID: 0 (ERR): The ipc information for IOS is invalid
2018/06/20 07:54:42.555 {lman_R0-0}{1}: [lman] [21231]: UUID: 0, ra: 0, TID: 0 (ERR): The ipc information for IOS is invalid
2018/06/20 07:54:41.554 {lman_R0-0}{1}: [lman] [21231]: UUID: 0, ra: 0, TID: 0 (ERR): The ipc information for IOS is invalid
2018/06/20 07:54:40.553 {lman_R0-0}{1}: [lman] [21231]: UUID: 0, ra: 0, TID: 0 (ERR): The ipc information for IOS is invalid
2018/06/20 07:54:39.553 {lman_R0-0}{1}: [lman] [21231]: UUID: 0, ra: 0, TID: 0 (ERR): The ipc information for IOS is invalid
2018/06/20 07:54:38.552 {lman_R0-0}{1}: [lman] [21231]: UUID: 0, ra: 0, TID: 0 (ERR): The ipc information for IOS is invalid
2018/06/20 07:54:37.551 {lman_R0-0}{1}: [lman] [21231]: UUID: 0, ra: 0, TID: 0 (ERR): The ipc information for IOS is invalid
2018/06/20 07:54:36.550 {lman_R0-0}{1}: [lman] [21231]: UUID: 0, ra: 0, TID: 0 (ERR): The ipc information for IOS is invalid
2018/06/20 07:54:35.550 {lman_R0-0}{1}: [lman] [21231]: UUID: 0, ra: 0, TID: 0 (ERR): The ipc information for IOS is invalid
2018/06/20 07:54:34.549 {lman_R0-0}{1}: [lman] [21231]: UUID: 0, ra: 0, TID: 0 (ERR): The ipc information for IOS is invalid
2018/06/20 07:54:33.548 {lman_R0-0}{1}: [lman] [21231]: UUID: 0, ra: 0, TID: 0 (ERR): The ipc information for IOS is invalid
2018/06/20 07:54:32.547 {lman_R0-0}{1}: [lman] [21231]: UUID: 0, ra: 0, TID: 0 (ERR): The ipc information for IOS is invalid
2018/06/20 07:54:31.547 {lman_R0-0}{1}: [lman] [21231]: UUID: 0, ra: 0, TID: 0 (ERR): The ipc information for IOS is invalid
2018/06/20 07:54:30.547 {lman_R0-0}{1}: [lman] [21231]: UUID: 0, ra: 0, TID: 0 (ERR): The ipc information for IOS is invalid
2018/06/20 07:54:30.537 {lman_R0-0}{1}: [bipc] [21231]: UUID: 0, ra: 0, TID: 0 (note): Pending connection to server 10.0.1.0
2018/06/20 07:54:29.546 {lman_R0-0}{1}: [lman] [21231]: UUID: 0, ra: 0, TID: 0 (ERR): The ipc information for IOS is invalid
2018/06/20 07:54:28.545 {lman_R0-0}{1}: [lman] [21231]: UUID: 0, ra: 0, TID: 0 (ERR): The ipc information for IOS is invalid
2018/06/20 07:54:27.545 {lman_R0-0}{1}: [lman] [21231]: UUID: 0, ra: 0, TID: 0 (ERR): The ipc information for IOS is invalid
2018/06/20 07:54:26.544 {lman_R0-0}{1}: [lman] [21231]: UUID: 0, ra: 0, TID: 0 (ERR): The ipc information for IOS is invalid
2018/06/20 07:54:25.543 {lman_R0-0}{1}: [lman] [21231]: UUID: 0, ra: 0, TID: 0 (ERR): The ipc information for IOS is invalid
2018/06/20 07:54:24.542 {lman_R0-0}{1}: [lman] [21231]: UUID: 0, ra: 0, TID: 0 (ERR): The ipc information for IOS is invalid
2018/06/20 07:54:23.542 {lman_R0-0}{1}: [lman] [21231]: UUID: 0, ra: 0, TID: 0 (ERR): The ipc information for IOS is invalid
2018/06/20 07:54:22.541 {lman_R0-0}{1}: [lman] [21231]: UUID: 0, ra: 0, TID: 0 (ERR): The ipc information for IOS is invalid
2018/06/20 07:54:21.540 {lman_R0-0}{1}: [lman] [21231]: UUID: 0, ra: 0, TID: 0 (ERR): The ipc information for IOS is invalid
2018/06/20 07:54:20.633 {lman_R0-0}{1}: [lman] [21231]: UUID: 0, ra: 0, TID: 0 (note): Peer attach: from location R0:0 is successful
2018/06/20 07:54:20.633 {lman_R0-0}{1}: [lman] [21231]: UUID: 0, ra: 0, TID: 0 (note): Not setting domain for cmand
2018/06/20 07:54:20.625 {lman_R0-0}{1}: [bipc] [21231]: UUID: 0, ra: 0, TID: 0 (note): Received a connection from client for path /tmp/rp/lipc/lman_lic_serv_socket
2018/06/20 07:54:20.624 {lman_R0-0}{1}: [tdllib] [21231]: UUID: 0, ra: 0, TID: 0 (note): epoch file read /tmp/tdlresolve/epoch_dir//2018_06_20_07_54_2413.epoch
2018/06/20 07:54:20.624 {lman_R0-0}{1}: [tdllib] [21231]: UUID: 0, ra: 0, TID: 0 (note): Detect newly epoch file generated: new epoch: /tmp/tdlresolve/epoch_dir//2018_06_20_07_54_2413.epoch
2018/06/20 07:54:20.624 {lman_R0-0}{1}: [tdllib] [21231]: UUID: 0, ra: 0, TID: 0 (note): Flag tdlh stale epoch for all tdl handles
2018/06/20 07:54:20.536 {lman_R0-0}{1}: [lman] [21231]: UUID: 0, ra: 0, TID: 0 (note): Chasfs Watch on rp/0/0/rtu_licensing for platform to create RTU properties
2018/06/20 07:54:20.536 {lman_R0-0}{1}: [lman] [21231]: UUID: 0, ra: 0, TID: 0 (note): The chassis product id: 'ISR4461/K9'
2018/06/20 07:54:20.536 {lman_R0-0}{1}: [lman] [21231]: UUID: 0, ra: 0, TID: 0 (note): The chassis serial number: 'FDO2213A0GL'
2018/06/20 07:54:20.536 {lman_R0-0}{1}: [bcrdu] [21231]: UUID: 0, ra: 0, TID: 0 (note): CRDU /tmp/sw/mount/isr4400v2-mono-universalk9.BLD_V169_THROTTLE_LATEST_20180618_044856_V16_9_0_163.SSA.pkg/usr/binos/bin/lman proc path is /tmp/patch/CRDU/BPROC_LM_RP/
2018/06/20 07:54:20.536 {lman_R0-0}{1}: [bcrdu] [21231]: UUID: 0, ra: 0, TID: 0 (note): CRDU /tmp/sw/mount/isr4400v2-mono-universalk9.BLD_V169_THROTTLE_LATEST_20180618_044856_V16_9_0_163.SSA.pkg/usr/binos/bin/lman procstr is BPROC_LM_RP
2018/06/20 07:54:20.533 {lman_R0-0}{1}: [lman] [21231]: UUID: 0, ra: 0, TID: 0 (note): No licensing objects present in chasfs to delete
2018/06/20 07:54:20.533 {lman_R0-0}{1}: [lman] [21231]: UUID: 0, ra: 0, TID: 0 (note): Deleting any existing licensing chasfs objects under [rp/0/0/licensing]
2018/06/20 07:54:20.532 {lman_R0-0}{1}: [syshw] [21231]: UUID: 0, ra: 0, TID: 0 (ERR): syshw build device: could not add register 7 dev: /sys/bus/platform/devices/cpld/reg_rp_sku_register (No such file or directory) due to No such file or directory
2018/06/20 07:54:20.532 {lman_R0-0}{1}: [syshw] [21231]: UUID: 0, ra: 0, TID: 0 (ERR): syshw build device: could not add register 5 dev: /sys/bus/platform/devices/cpld/phys_slot_number (No such file or directory) due to No such file or directory

Total messages : 49

show policy-map

To display quality of service (QoS) policy maps, which define classification criteria for incoming traffic, use the show policy-map command in EXEC mode.

show policy-map [policy-map-name | interface interface-id]

show policy-map interface { Auto-template|Capwap|GigabitEthernet|GroupVI|InternalInterface|Loopback|Lspvif|Null|Port-channel|TenGigabitEthernet|Tunnel|Vlan|brief|class|input|output

show policy-map interface { ap name ap_name | client mac mac_address | radio type { 24ghz | 5ghz} ap name ap_name | ssid name ssid_name { ap name ap_name | radio type { 24ghz | 5ghz} ap name ap_name}}

Syntax Description


`policy-map-name`	(Optional) Name of the policy-map.
interface `interface-id`	(Optional) Displays the statistics and the configurations of the input and output policies that are attached to the interface.
ap name `ap_name`	Displays SSID policy configuration of an access point.
client mac `mac_address`	Displays information about the policies for all the client targets.
radio type `{` 24ghz `\|` 5ghz	Displays policy configuration of the access point in the specified radio type.
ssid name `ssid_name`	Displays policy configuration of an SSID.

Command Modes

User EXEC

Privileged EXEC

Command History


Release	Modification
	This command was introduced.

Usage Guidelines

Policy maps can include policers that specify the bandwidth limitations and the action to take if the limits are exceeded.

Note

Though visible in the command-line help string, the control-plane , session , and type keywords are not supported, and the statistics shown in the display should be ignored.

To display classification counters for ternary content addressable memory (TCAM) (marking or policing) based policies, enter the interface ID. Classification counters have the following restrictions:

Classification counters are supported only on wired ports (in the ingress and egress directions).
Classification counters count packets instead of bytes.
Only QoS configurations with marking or policing trigger the classification counter.
As long as there is policing or marking action in the policy, the class-default will have classification counters.
Classification counters are not port based. The counters are shared across targets sharing the same policy map. This means that the classification counter aggregates all packets belonging to the same class of the same policy which attach to different interfaces.

Examples

This is an example of output from the show policy-map interface command, where classification counters are displayed:

Device# show policy-map interface gigabitethernet1/0/1

  GigabitEthernet1/0/1

  Service-policy input: AutoQos-4.0-CiscoPhone-Input-Policy

    Class-map: AutoQos-4.0-Voip-Data-CiscoPhone-Class (match-any)
      0 packets
      Match: cos  5
        0 packets, 0 bytes
        5 minute rate 0 bps
      QoS Set
        dscp ef
      police:
          cir 128000 bps, bc 8000 bytes
        conformed 0 bytes; actions:
          transmit
        exceeded 0 bytes; actions:
          set-dscp-transmit dscp table policed-dscp
        conformed 0000 bps, exceed 0000 bps

    Class-map: AutoQos-4.0-Voip-Signal-CiscoPhone-Class (match-any)
      0 packets
      Match: cos  3
        0 packets, 0 bytes
        5 minute rate 0 bps
      QoS Set
        dscp cs3
      police:
          cir 32000 bps, bc 8000 bytes
        conformed 0 bytes; actions:
          transmit
        exceeded 0 bytes; actions:
          set-dscp-transmit dscp table policed-dscp
        conformed 0000 bps, exceed 0000 bps

    Class-map: AutoQos-4.0-Default-Class (match-any)
      0 packets
      Match: access-group name AutoQos-4.0-Acl-Default
        0 packets, 0 bytes
        5 minute rate 0 bps
      QoS Set
        dscp default

    Class-map: class-default (match-any)
      0 packets
      Match: any
        0 packets, 0 bytes
        5 minute rate 0 bps

  Service-policy output: AutoQos-4.0-Output-Policy

    queue stats for all priority classes:
      Queueing
      priority level 1

      (total drops) 0
      (bytes output) 0

    Class-map: AutoQos-4.0-Output-Priority-Queue (match-any)
      0 packets
      Match:  dscp cs4 (32) cs5 (40) ef (46)
        0 packets, 0 bytes
        5 minute rate 0 bps
      Match: cos  5
        0 packets, 0 bytes
        5 minute rate 0 bps
      Priority: 30% (300000 kbps), burst bytes 7500000,

      Priority Level: 1

    Class-map: AutoQos-4.0-Output-Control-Mgmt-Queue (match-any)
      0 packets
      Match:  dscp cs2 (16) cs3 (24) cs6 (48) cs7 (56)
        0 packets, 0 bytes
        5 minute rate 0 bps
      Match: cos  3
        0 packets, 0 bytes
        5 minute rate 0 bps
      Queueing
      queue-limit dscp 16 percent 80
      queue-limit dscp 24 percent 90
      queue-limit dscp 48 percent 100
      queue-limit dscp 56 percent 100

      (total drops) 0
      (bytes output) 0
      bandwidth remaining 10%

      queue-buffers ratio 10

    Class-map: AutoQos-4.0-Output-Multimedia-Conf-Queue (match-any)
      0 packets
      Match:  dscp af41 (34) af42 (36) af43 (38)
        0 packets, 0 bytes
        5 minute rate 0 bps
      Match: cos  4
        0 packets, 0 bytes
        5 minute rate 0 bps
      Queueing

      (total drops) 0
      (bytes output) 0
      bandwidth remaining 10%
      queue-buffers ratio 10

    Class-map: AutoQos-4.0-Output-Trans-Data-Queue (match-any)
      0 packets
      Match:  dscp af21 (18) af22 (20) af23 (22)
        0 packets, 0 bytes
        5 minute rate 0 bps
      Match: cos  2
        0 packets, 0 bytes
        5 minute rate 0 bps
      Queueing

      (total drops) 0
      (bytes output) 0
      bandwidth remaining 10%
      queue-buffers ratio 10

    Class-map: AutoQos-4.0-Output-Bulk-Data-Queue (match-any)
      0 packets
      Match:  dscp af11 (10) af12 (12) af13 (14)
        0 packets, 0 bytes
        5 minute rate 0 bps
      Match: cos  1
        0 packets, 0 bytes
        5 minute rate 0 bps
      Queueing

      (total drops) 0
      (bytes output) 0
      bandwidth remaining 4%
      queue-buffers ratio 10

    Class-map: AutoQos-4.0-Output-Scavenger-Queue (match-any)
      0 packets
      Match:  dscp cs1 (8)
        0 packets, 0 bytes
        5 minute rate 0 bps
      Queueing

      (total drops) 0
      (bytes output) 0
      bandwidth remaining 1%
      queue-buffers ratio 10

    Class-map: AutoQos-4.0-Output-Multimedia-Strm-Queue (match-any)
      0 packets
      Match:  dscp af31 (26) af32 (28) af33 (30)
        0 packets, 0 bytes
        5 minute rate 0 bps
      Queueing

      (total drops) 0
      (bytes output) 0
      bandwidth remaining 10%
      queue-buffers ratio 10

    Class-map: class-default (match-any)
      0 packets
      Match: any
        0 packets, 0 bytes
        5 minute rate 0 bps
      Queueing

      (total drops) 0
      (bytes output) 0
      bandwidth remaining 25%
      queue-buffers ratio 25

show rate-limit client

To configure the rate-limit for a client on the AP, use the show rate-limit client command.

show rate-limit client

Syntax Description


This command has no arguments.

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.1	This command was introduced.

Examples

The following example shows how to configure the rate-limit for a client on the AP:

Device# show rate-limit client
Config:
mac vap rt_rate_out rt_rate_in rt_burst_out rt_burst_in nrt_rate_out nrt_rate_in nrt_burst_out nrt_burst_in
00:1C:F1:09:85:E7 0 8001 8002 8003 8004 8005 8006 8007 8008
Statistics:
name up down
Unshaped 0 0
Client RT pass 0 0
Client NRT pass 0 0
Client RT drops 0 0
Client NRT drops 0 0
Per client rate limit:
mac vap rate_out rate_in policy

show ssh

To see the SSH connection status, use the show ssh command.

show ssh { connection-number | {vty | connection-number }}

Syntax Description


`connection-number`	SSH connection number. Valid range is 0 to 530.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced in a release earlier than Cisco IOS XE Gibraltar 16.10.1.

Examples

The following example shows how to see the SSH connection status:

Device# show ssh connection-number

show stealthwatch-cloud connection

To view the connection details of Stealthwatch Cloud, use the show stealthwatch-cloud connection command.

show stealthwatch-cloud connection

Syntax Description


This command has no keywords or arguments.

Command Default

None

Command Modes

Privileged EXEC mode

Command History


Release	Modification
Cisco IOS XE Bengaluru 17.4.1	This command was introduced.

Usage Guidelines

None

Examples

The following example shows how to view the connection details of Stealthwatch Cloud:

Device# show stealthwatch-cloud connection

show stealthwatch-cloud wireless-shim

To view the wireless-shim details of Stealthwatch Cloud, use the show stealthwatch-cloud wireless-shim command.

show stealthwatch-cloud wireless-shim

Syntax Description


This command has no keywords or arguments.

Command Default

None

Command Modes

Privileged EXEC mode

Command History


Release	Modification
Cisco IOS XE Bengaluru 17.4.1	This command was introduced.

Usage Guidelines

None

Examples

The following example shows how to view the wireless-shim details of Stealthwatch Cloud:

Device# show stealthwatch-cloud wireless-shim

show tech-support wireless

To display Cisco wireless LAN controller variables frequently requested by Cisco Technical Assistance Center (TAC), use the show tech-support wireless command in privileged EXEC mode.

show tech-support wireless

Syntax Description

This command has no arguments or keywords.

Command Default

No default behavior or values.

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.1	This command was introduced.

Examples

The following is sample output from the show tech-support wireless command:

Device# show tech-support wireless
 *** show ap capwap timers ***

Cisco AP CAPWAP timers

AP Discovery timer       : 10
AP Heart Beat timeout    : 30
Primary Discovery timer  : 120
Primed Join timeout      : 0
Fast Heartbeat           : Disabled
Fast Heartbeat timeout   : 1
*** show ap capwap retransmit ***
Global control packet retransmit interval : 3
Global control packet retransmit count : 5

AP Name                           Retransmit Interval             Retransmit Count
------------------------------------------------------------------------------------------------
TSIM_AP-2                         3                               5
TSIM_AP-3                         3                               5
*** show ap dot11 24ghz cleanair air-quality summary ***

AQ = Air Quality
DFS = Dynamic Frequency Selection

*** show ap dot11 24ghz cleanair air-quality worst ***

AQ = Air Quality
DFS = Dynamic Frequency Selection
AP Name             Channel   Avg AQ  Min AQ  Interferers  DFS
--------------------------------------------------------------
                    0         0       0       0            No
*** show ap dot11 24ghz cleanair config ***

Clean Air Solution............................... : Disabled
Air Quality Settings:
    Air Quality Reporting........................ : Disabled
    Air Quality Reporting Period (min)........... : 15
    Air Quality Alarms........................... : Enabled
    Air Quality Alarm Threshold.................. : 10
Interference Device Settings:
    Interference Device Reporting................ : Enabled
        Bluetooth Link........................... : Enabled
        Microwave Oven........................... : Enabled
        802.11 FH................................ : Enabled
        Bluetooth Discovery...................... : Enabled
        TDD Transmitter.......................... : Enabled
        Jammer................................... : Enabled
        Continuous Transmitter................... : Enabled
        DECT-like Phone.......................... : Enabled
        Video Camera............................. : Enabled
        802.15.4................................. : Enabled
        WiFi Inverted............................ : Enabled
        WiFi Invalid Channel..................... : Enabled
        SuperAG.................................. : Enabled
        Canopy................................... : Enabled
        Microsoft Device......................... : Enabled
        WiMax Mobile............................. : Enabled
        WiMax Fixed.............................. : Enabled
    Interference Device Types Triggering Alarms:
        Bluetooth Link........................... : Disabled
        Microwave Oven........................... : Disabled
        802.11 FH................................ : Disabled
        Bluetooth Discovery...................... : Disabled
        TDD Transmitter.......................... : Disabled
        Jammer................................... : Disabled
        Continuous Transmitter................... : Disabled
        DECT-like Phone.......................... : Disabled
        Video Camera............................. : Disabled
  802.15.4................................. : Disabled
        WiFi Inverted............................ : Enabled
        WiFi Invalid Channel..................... : Enabled
        SuperAG.................................. : Disabled
        Canopy................................... : Disabled
        Microsoft Device......................... : Disabled
        WiMax Mobile............................. : Disabled
        WiMax Fixed.............................. : Disabled
    Interference Device Alarms................... : Enabled
Additional Clean Air Settings:
    CleanAir Event-driven RRM State.............. : Disabled
    CleanAir Driven RRM Sensitivity.............. : LOW
    CleanAir Persistent Devices state............ : Disabled

show tech-support wireless ap

To display specific information about the Cisco APs variables frequently requested by Cisco Technical Assistance Center (TAC), use the show tech-support wireless ap command in privileged EXEC mode.

show tech-support wireless ap

Syntax Description


This command has no arguments or keywords.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced.

Usage Guidelines

The output of the following commands are displayed as part of show tech-support wireless apcommand:

show ap session termination statistics
show ap status
show ap tag summary
show platform software bssid chassis active F0 statistics
show platform software bssid chassis active R0 statistics
show platform software capwap chassis active F0 statistics
show platform software capwap chassis active R0 statistics
show platform software dtls chassis active F0 statistics
show platform software dtls chassis active R0 statistics
show platform software radio chassis active F0 statistics
show platform software radio chassis active R0 statistics

Examples

The following is sample output from the show tech-support wireless ap command

Device# show tech-support wireless ap

------------------ show platform software dtls chassis active R0 statistics ------------------


DTLS Counters     (Success/Failure)
-----------------------------------
Create                  0/0
Delete                  0/0

Switch 1:
OM Create               0/0
OM Delete               0/0
Ack Nack Notify         0/0


------------------ show platform software radio chassis active R0 statistics ------------------



Switch 1:
NACK Notify             0/0
  Create Failure        0
  Delete Failure        0


------------------ show platform software bssid chassis active R0 statistics ------------------



Switch 1:
NACK Notify             0/0
  Create Failure        0
  Delete Failure        0


------------------ show platform software capwap chassis active R0 statistics ------------------


Capwap Counters   (Success/Failure)
-----------------------------------
Create                  0/0
Delete                  0/0
Modify                  0/0

Switch 1:
OM Create               0/0
OM Delete               0/0
ACK-NACK Notify         0/0
  Tunnel State          0/0
  Tunnel Create         0/0
  Tunnel Modify         0/0
  Tunnel Delete         0/0


------------------ show platform software dtls chassis active F0 statistics ------------------


DTLS Counters     (Success/Failure)
-----------------------------------
Create                  0/0
Delete                  0/0
HW Create               0/0
HW Modify               0/0
HW Delete               0/0
Create Ack              0/0
Modify Ack              0/0
Delete Ack              0/0
Ack Ack Notify          0/0
Ack Nack Notify         0/0
Nack Notify             0/0
HA Seq GET              665/0
HA Seq SET              0/0
HA Seq Crypto GET       0/0
HA Seq Crypto SET       0/0
HA Seq Crypto Callback  0/0

HA Seq last Responsed   0
HA Seq Pending          0
HA Seq Outstanding cb   0
          

------------------ show platform software radio chassis active F0 statistics ------------------


Radio Counters    (Success/Failure)
-----------------------------------
Create                  0/0
Delete                  0/0
HW Create               0/0
HW Modify               0/0
HW Delete               0/0
Create Ack              0/0
Modify Ack              0/0
Delete Ack              0/0
Nack Notify             0/0


------------------ show platform software bssid chassis active F0 statistics ------------------


Bssid Counters    (Success/Failure)
-----------------------------------
Create                 0/0
Delete                 0/0
HW Create              0/0
HW Modify              0/0
HW Delete              0/0
Create Ack             0/0
Modify Ack             0/0
Delete Ack             0/0
Nack Notify            0/0


------------------ show platform software capwap chassis active F0 statistics ------------------


Capwap Counters   (Success/Failure)
-----------------------------------
Create                  0/0
Delete                  0/0
HW Create               0/0
HW Modify               0/0
HW Delete               0/0
Create Ack              0/0
Modify Ack              0/0
Delete Ack              0/0
Ack Ack Notify          0/0
Ack Nack Notify         0/0
Nack Notify             0/0


------------------ show ap auto-rf dot11 24ghz ------------------



------------------ show ap auto-rf dot11 5ghz ------------------



------------------ show ap capwap retransmit ------------------



------------------ show ap config dot11 dual-band summary ------------------



------------------ show ap config general ------------------




------------------ show ap dot11 24ghz channel ------------------


Leader Automatic Channel Assignment
  Channel Assignment Mode                    : AUTO
  Channel Update Interval                    : 600 seconds
  Anchor time (Hour of the day)              : 0
  Channel Update Contribution
    Noise                                    : Enable
    Interference                             : Enable
    Load                                     : Disable
    Device Aware                             : Disable
  CleanAir Event-driven RRM option           : Disabled
  Channel Assignment Leader                  : ewlc-doc (9.12.32.10)
  Last Run                                   : 25 seconds ago

  DCA Sensitivity Level                      : MEDIUM : 10 dB
  DCA Minimum Energy Limit                   : -95 dBm
  Channel Energy Levels
    Minimum                                  : unknown
    Average                                  : unknown
    Maximum                                  : -128 dBm
  Channel Dwell Times
    Minimum                                  : unknown
    Average                                  : unknown
          

------------------ show ap dot11 24ghz group ------------------


Radio RF Grouping

  802.11b Group Mode               : AUTO
  802.11b Group Update Interval    : 600 seconds
  802.11b Group Leader             : ewlc-doc (9.12.32.10)
  802.11b Last Run                 : 26 seconds ago


RF Group Members

Controller name                   Controller IP     
--------------------------------------------------
ewlc-doc                          9.12.32.10        




------------------ show ap dot11 24ghz load-info ------------------



------------------ show ap dot11 24ghz monitor ------------------


Default 802.11b AP monitoring
  802.11b Monitor Mode                 : Enabled
  802.11b Monitor Channels             : Country channels
  802.11b RRM Neighbor Discover Type   : Transparent
  802.11b AP Coverage Interval         : 180 seconds
  802.11b AP Load Interval             : 60 seconds
  802.11b AP Noise Interval            : 180 seconds
  802.11b AP Signal Strength Interval  : 60 seconds
  802.11b NDP RSSI Normalization       : Enabled


------------------ show ap dot11 24ghz network ------------------



802.11b Network                           : Enabled
11gSupport                                : Enabled
11nSupport                                : Enabled
802.11b/g Operational Rates
  802.11b 1M                              : Mandatory
  802.11b 2M                              : Mandatory
  802.11b 5.5M                            : Mandatory
  802.11b 11M                             : Mandatory
  802.11g 6M                              : Supported
  802.11g 9M                              : Supported
  802.11g 12M                             : Supported
  802.11g 18M                             : Supported
  802.11g 24M                             : Supported
  802.11g 36M                             : Supported
  802.11g 48M                             : Supported
  802.11g 54M                             : Supported
802.11n MCS Settings:
  MCS 0 : Supported
  MCS 1 : Supported
  MCS 2 : Supported
  MCS 3 : Supported
          

------------------ show ap dot11 24ghz profile ------------------



Default 802.11b AP performance profiles
  802.11b Global Interference threshold    : 10 %
  802.11b Global noise threshold           : -70 dBm
  802.11b Global RF utilization threshold  : 80 %
  802.11b Global throughput threshold      : 1000000 bps
  802.11b Global clients threshold         : 12 clients


------------------ show ap dot11 24ghz summary ------------------



------------------ show ap dot11 24ghz txpower ------------------


Automatic Transmit Power Assignment

Transmit Power Assignment Mode          : AUTO
Transmit Power Update Interval          : 600 seconds 
Transmit Power Threshold                : -70 dBm
Transmit Power Neighbor Count           : 3 APs
Min Transmit Power                      : -10 dBm
Max Transmit Power                      : 30 dBm
Update Contribution
    Noise                               : Enable
    Interference                        : Enable
    Load                                : Disable
    Device Aware                        : Disable
Transmit Power Assignment Leader        : ewlc-doc (9.12.32.10)
Last Run                                : 27 seconds ago


------------------ show ap dot11 5ghz channel ------------------


Leader Automatic Channel Assignment
  Channel Assignment Mode                    : AUTO
  Channel Update Interval                    : 600 seconds
  Anchor time (Hour of the day)              : 0
  Channel Update Contribution
    Noise                                    : Enable
    Interference                             : Enable
    Load                                     : Disable
    Device Aware                             : Disable
  CleanAir Event-driven RRM option           : Disabled
  Channel Assignment Leader                  : ewlc-doc (9.12.32.10)
  Last Run                                   : 27 seconds ago

  DCA Sensitivity Level                      : MEDIUM : 15 dB
  DCA 802.11n/ac Channel Width               : 20 MHz
  DCA Minimum Energy Limit                   : -95 dBm
  Channel Energy Levels
    Minimum                                  : unknown
    Average                                  : unknown
    Maximum                                  : -128 dBm
  Channel Dwell Times
    Minimum                                  : unknown
          

------------------ show ap dot11 5ghz group ------------------


Radio RF Grouping

  802.11a Group Mode               : AUTO
  802.11a Group Update Interval    : 600 seconds
  802.11a Group Leader             : ewlc-doc (9.12.32.10)
  802.11a Last Run                 : 28 seconds ago


RF Group Members

Controller name                   Controller IP     
--------------------------------------------------
ewlc-doc                          9.12.32.10        




------------------ show ap dot11 5ghz load-info ------------------



------------------ show ap dot11 5ghz monitor ------------------


Default 802.11a AP monitoring
  802.11a Monitor Mode                 : Enabled
  802.11a Monitor Channels             : Country channels
  802.11a RRM Neighbor Discover Type   : Transparent
  802.11a AP Coverage Interval         : 180 seconds
  802.11a AP Load Interval             : 60 seconds
  802.11a AP Noise Interval            : 180 seconds
  802.11a AP Signal Strength Interval  : 60 seconds
  802.11a NDP RSSI Normalization       : Enabled


------------------ show ap dot11 5ghz network ------------------



802.11a Network                           : Enabled
11nSupport                                : Enabled
  802.11a Low Band                        : Enabled
  802.11a Mid Band                        : Enabled
  802.11a High Band                       : Enabled
802.11a Operational Rates
  802.11a 6M                              : Mandatory
  802.11a 9M                              : Supported
  802.11a 12M                             : Mandatory
  802.11a 18M                             : Supported
  802.11a 24M                             : Mandatory
  802.11a 36M                             : Supported
  802.11a 48M                             : Supported
  802.11a 54M                             : Supported
802.11n MCS Settings:
  MCS 0 : Supported
  MCS 1 : Supported
  MCS 2 : Supported
  MCS 3 : Supported
  MCS 4 : Supported
  MCS 5 : Supported
          

------------------ show ap dot11 5ghz profile ------------------


Default 802.11a AP performance profiles

  802.11a Global Interference threshold          : 10 %
  802.11a Global noise threshold                 : -70 dBm
  802.11a Global RF utilization threshold        : 80 %
  802.11a Global throughput threshold            : 1000000 bps
  802.11a Global clients threshold               : 12 clients


------------------ show ap dot11 5ghz summary ------------------



------------------ show ap dot11 5ghz txpower ------------------


Automatic Transmit Power Assignment

Transmit Power Assignment Mode          : AUTO
Transmit Power Update Interval          : 600 seconds 
Transmit Power Threshold                : -70 dBm
Transmit Power Neighbor Count           : 3 APs
Min Transmit Power                      : -10 dBm
Max Transmit Power                      : 30 dBm
Update Contribution
    Noise                               : Enable
    Interference                        : Enable
    Load                                : Disable
    Device Aware                        : Disable
Transmit Power Assignment Leader        : ewlc-doc (9.12.32.10)
Last Run                                : 28 seconds ago


------------------ show ap image ------------------




------------------ show wireless stats ap join summary ------------------

Number of APs: 0

Base MAC        Ethernet MAC    AP Name                           IP Address       Status      Last Failure Type     Last Disconnect Reason
---------------------------------------------------------------------------------------------------------------------------------------------


------------------ show ap rf-profile summary ------------------



Number of RF-profiles: 6

RF Profile Name                  Band     Description                          State 
------------------------------------------------------------------------------------
Low_Client_Density_rf_5gh        5 GHz    pre configured Low Client Density rf Up    
High_Client_Density_rf_5gh       5 GHz    pre configured High Client Density r Up    
Low_Client_Density_rf_24gh       2.4 GHz  pre configured Low Client Density rf Up    
High_Client_Density_rf_24gh      2.4 GHz  pre configured High Client Density r Up    
Typical_Client_Density_rf_5gh    5 GHz    pre configured Typical Density rfpro Up    
Typical_Client_Density_rf_24gh   2.4 GHz  pre configured Typical Client Densit Up    


------------------ show ap slots ------------------



------------------ show ap summary ------------------


Number of APs: 0



------------------ show ap uptime ------------------


Number of APs: 0



------------------ show ap tag summary ------------------


Number of APs: 0



------------------ show ap status ------------------



------------------ show ap cdp neighbors ------------------


Number of neighbors: 0



------------------ show ap ap-join-profile summary ------------------



Number of AP Profiles: 1
AP Profile Name                   Description                             
------------------------------------------------------------------------
default-ap-profile                default ap profile                      


------------------ show ap link-encryption ------------------



------------------ show wireless stats ap session termination ------------------



------------------ show wireless loadbalance ap affinity wncd 0 ------------------



------------------ show wireless loadbalance ap affinity wncd 1 ------------------



------------------ show wireless loadbalance ap affinity wncd 2 ------------------



------------------ show wireless loadbalance ap affinity wncd 3 ------------------



------------------ show wireless loadbalance ap affinity wncd 4 ------------------



------------------ show wireless loadbalance ap affinity wncd 5 ------------------



------------------ show wireless loadbalance ap affinity wncd 6 ------------------



------------------ show wireless loadbalance ap affinity wncd 7 ------------------

show tech-support wireless client

To print the data related to all clients or a particular client, use the show tech-support wireless client command in privileged EXEC mode.

show tech-support wireless client

Syntax Description


mac-address	Client MAC address.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced.

Usage Guidelines

The output of the following commands are displayed as part of show tech-support wireless client command:

show platform software wireless-client chassis active F0 statistics
show platform software wireless-client chassis active R0 statistics
show wireless client calls active
show wireless client calls rejected
show wireless client client-statistics summary
show wireless client device summary
show wireless client mac <mac-addr> details
show wireless client probing
show wireless client sleeping-client
show wireless client statistic
show wireless client steering
show wireless client summary
show wireless exclusionlist
show wireless pmk-cache

Examples

The following is sample output from the show tech-support wireless client command

Device# show tech-support wireless client

------------------ show wireless stats client summary ------------------

Number of Local Clients : 0


MAC Address    AP Name                          WLAN UpTime(secs) Rx Pkts Tx Pkts RSSI SNR  Data Retries
--------------------------------------------------------------------------------------------------------
                                                                                                        


------------------ show wireless client summary ------------------

Number of Local Clients: 0


Number of Excluded Clients: 0



------------------ show wireless client device summary ------------------



------------------ show wireless client steering ------------------


Client Steering Configuration Information
  Macro to micro transition threshold                  : -55 dBm
  Micro to Macro transition threshold                  : -65 dBm
  Micro-Macro transition minimum client count          : 3
  Micro-Macro transition client balancing window       : 3
  Probe suppression mode                               : Disabled
  Probe suppression validity window                    : 100 s 
  Probe suppression aggregate window                   : 200 ms
  Probe suppression transition aggressiveness          : 3
  Probe suppression hysteresis                         : -6 dBm

WLAN Configuration Information



------------------ show wireless client calls active ------------------



------------------ show wireless client calls rejected ------------------



------------------ show wireless client sleeping-client ------------------

Total number of sleeping-client entries: 0


------------------ show wireless client probing ------------------



------------------ show wireless client ap dot11 24ghz ------------------





------------------ show wireless client ap dot11 5ghz ------------------





------------------ show wireless pmk-cache ------------------


Number of PMK caches in total : 0

Type      Station             Entry Lifetime  VLAN Override         IP Override         Audit-Session-Id
---------------------------------------------------------------------------------------------------------


------------------ show wireless exclusionlist ------------------



------------------ show wireless country  configured ------------------



Configured Country..........................   US - United States                       
Configured Country Codes
        US  - United States                  802.11a Indoor/ 802.11b Indoor/ 802.11g Indoor 


------------------ show wireless tag rf summary ------------------



Number of RF Tags: 1

RF tag name                       Description                             
------------------------------------------------------------------------
default-rf-tag                    default RF tag                          


------------------ show platform software wireless-client chassis active R0 statistics ------------------


Client Counters   (Success/Failure)
-----------------------------------
Create                  0/0
Delete                  0/0
Modify                  0/0

Switch 1:
OM Create               0/0
OM Delete               0/0
NACK Notify             0/0
  Create Failure        0
  Modify Failure        0
  Delete Failure        0


------------------ show platform software wireless-client chassis active F0 statistics ------------------


Client Counters   (Success/Failure)
-----------------------------------
Create                  0/0
Delete                  0/0
HW Create               0/0
HW Modify               0/0
HW Delete               0/0
Create Ack              0/0
Modify Ack              0/0
Delete Ack              0/0
NACK Notify             0/0

show tech-support wireless radio

To print the data related to the radio, use the show tech-support wireless radio command in privileged EXEC mode.

show tech-support wireless radio

Syntax Description


This command has no keywords or arguments.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced.

Usage Guidelines

The output of the following commands are displayed as part of show tech-support wireless radio command:

show ap auto-rf dot11 24ghz
show ap auto-rf dot11 5ghz
show ap config dot11 dual-band summary
show ap config general
show ap dot11 24ghz channel
show ap dot11 24ghz coverage
show ap dot11 24ghz group
show ap dot11 24ghz high-density
show ap dot11 24ghz load-info
show ap dot11 24ghz monitor
show ap dot11 24ghz network
show ap dot11 24ghz summary
show ap dot11 24ghz txpower
show ap dot11 5ghz channel
show ap dot11 5ghz coverage
show ap dot11 5ghz group
show ap dot11 5ghz high-density
show ap dot11 5ghz load-info
show ap dot11 5ghz monitor
show ap dot11 5ghz network
show ap dot11 5ghz summary
show ap dot11 5ghz txpower
show ap fra
show ap rf-profile name Rf1 detail
show ap rf-profile summary
show ap summary
show wireless band-select

Examples

The following is sample output from the show tech-support wireless radio command

Device# show tech-support wireless radio 

------------------ show ap summary ------------------


Number of APs: 0



------------------ show ap dot11 24ghz summary ------------------



------------------ show ap dot11 5ghz summary ------------------



------------------ show ap config dot11 dual-band summary ------------------



------------------ show ap dot11 24ghz channel ------------------


Leader Automatic Channel Assignment
  Channel Assignment Mode                    : AUTO
  Channel Update Interval                    : 600 seconds
  Anchor time (Hour of the day)              : 0
  Channel Update Contribution
    Noise                                    : Enable
    Interference                             : Enable
    Load                                     : Disable
    Device Aware                             : Disable
  CleanAir Event-driven RRM option           : Disabled
  Channel Assignment Leader                  : ewlc-doc (9.12.32.10)
  Last Run                                   : 550 seconds ago

  DCA Sensitivity Level                      : MEDIUM : 10 dB
  DCA Minimum Energy Limit                   : -95 dBm
  Channel Energy Levels
    Minimum                                  : unknown
    Average                                  : unknown
    Maximum                                  : -128 dBm
  Channel Dwell Times
    Minimum                                  : unknown
    Average                                  : unknown
    Maximum                                  : unknown
  802.11b 2.4 GHz Auto-RF Channel List
    Allowed Channel List                     : 1,6,11
    Unused Channel List                      : 2,3,4,5,7,8,9,10


------------------ show ap dot11 5ghz channel ------------------


Leader Automatic Channel Assignment
  Channel Assignment Mode                    : AUTO
  Channel Update Interval                    : 600 seconds
  Anchor time (Hour of the day)              : 0
  Channel Update Contribution
    Noise                                    : Enable
    Interference                             : Enable
    Load                                     : Disable
    Device Aware                             : Disable
  CleanAir Event-driven RRM option           : Disabled
  Channel Assignment Leader                  : ewlc-doc (9.12.32.10)
  Last Run                                   : 552 seconds ago

  DCA Sensitivity Level                      : MEDIUM : 15 dB
  DCA 802.11n/ac Channel Width               : 20 MHz
  DCA Minimum Energy Limit                   : -95 dBm
  Channel Energy Levels
    Minimum                                  : unknown
    Average                                  : unknown
    Maximum                                  : -128 dBm
  Channel Dwell Times
    Minimum                                  : unknown
    Average                                  : unknown
    Maximum                                  : unknown
  802.11a 5 GHz Auto-RF Channel List
    Allowed Channel List                     : 36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,144,149,153,157,161
    Unused Channel List                      : 165


------------------ show ap dot11 24ghz coverage ------------------


Coverage Hole Detection
  802.11b Coverage Hole Detection Mode             : Enabled
  802.11b Coverage Voice Packet Count              : 100 packet(s)
  802.11b Coverage Voice Packet Percentage         : 50%
  802.11b Coverage Voice RSSI Threshold            : -80 dBm
  802.11b Coverage Data Packet Count               : 50 packet(s)
  802.11b Coverage Data Packet Percentage          : 50%
  802.11b Coverage Data RSSI Threshold             : -80 dBm
  802.11b Global coverage exception level          : 25 %
  802.11b Global client minimum exception level    : 3 clients


------------------ show ap dot11 5ghz coverage ------------------


Coverage Hole Detection
  802.11a Coverage Hole Detection Mode          : Enabled
  802.11a Coverage Voice Packet Count           : 100 packet(s)
  802.11a Coverage Voice Packet Percentage      : 50 %
  802.11a Coverage Voice RSSI Threshold         : -80dBm
  802.11a Coverage Data Packet Count            : 50 packet(s)
  802.11a Coverage Data Packet Percentage       : 50 %
  802.11a Coverage Data RSSI Threshold          : -80dBm
  802.11a Global coverage exception level       : 25 %
  802.11a Global client minimum exception level : 3 clients


------------------ show ap dot11 24ghz group ------------------


Radio RF Grouping

  802.11b Group Mode               : AUTO
  802.11b Group Update Interval    : 600 seconds
  802.11b Group Leader             : ewlc-doc (9.12.32.10)
  802.11b Last Run                 : 553 seconds ago


RF Group Members

Controller name                   Controller IP     
--------------------------------------------------
ewlc-doc                          9.12.32.10        




------------------ show ap dot11 5ghz group ------------------


Radio RF Grouping

  802.11a Group Mode               : AUTO
  802.11a Group Update Interval    : 600 seconds
  802.11a Group Leader             : ewlc-doc (9.12.32.10)
  802.11a Last Run                 : 553 seconds ago


RF Group Members

Controller name                   Controller IP     
--------------------------------------------------
ewlc-doc                          9.12.32.10        




------------------ show ap dot11 24ghz high-density ------------------



------------------ show ap dot11 5ghz high-density ------------------



------------------ show ap dot11 5ghz load-info ------------------



------------------ show ap dot11 24ghz load-info ------------------



------------------ show ap dot11 24ghz profile ------------------



Default 802.11b AP performance profiles
  802.11b Global Interference threshold    : 10 %
  802.11b Global noise threshold           : -70 dBm
  802.11b Global RF utilization threshold  : 80 %
  802.11b Global throughput threshold      : 1000000 bps
  802.11b Global clients threshold         : 12 clients


------------------ show ap dot11 5ghz profile ------------------


Default 802.11a AP performance profiles

  802.11a Global Interference threshold          : 10 %
  802.11a Global noise threshold                 : -70 dBm
  802.11a Global RF utilization threshold        : 80 %
  802.11a Global throughput threshold            : 1000000 bps
  802.11a Global clients threshold               : 12 clients


------------------ show ap dot11 24ghz monitor ------------------


Default 802.11b AP monitoring
  802.11b Monitor Mode                 : Enabled
  802.11b Monitor Channels             : Country channels
  802.11b RRM Neighbor Discover Type   : Transparent
  802.11b AP Coverage Interval         : 180 seconds
  802.11b AP Load Interval             : 60 seconds
  802.11b AP Noise Interval            : 180 seconds
  802.11b AP Signal Strength Interval  : 60 seconds
  802.11b NDP RSSI Normalization       : Enabled


------------------ show ap dot11 5ghz monitor ------------------


Default 802.11a AP monitoring
  802.11a Monitor Mode                 : Enabled
  802.11a Monitor Channels             : Country channels
  802.11a RRM Neighbor Discover Type   : Transparent
  802.11a AP Coverage Interval         : 180 seconds
  802.11a AP Load Interval             : 60 seconds
  802.11a AP Noise Interval            : 180 seconds
  802.11a AP Signal Strength Interval  : 60 seconds
  802.11a NDP RSSI Normalization       : Enabled


------------------ show ap dot11 24ghz network ------------------



802.11b Network                           : Enabled
11gSupport                                : Enabled
11nSupport                                : Enabled
802.11b/g Operational Rates
  802.11b 1M                              : Mandatory
  802.11b 2M                              : Mandatory
  802.11b 5.5M                            : Mandatory
  802.11b 11M                             : Mandatory
  802.11g 6M                              : Supported
  802.11g 9M                              : Supported
  802.11g 12M                             : Supported
  802.11g 18M                             : Supported
  802.11g 24M                             : Supported
  802.11g 36M                             : Supported
  802.11g 48M                             : Supported
  802.11g 54M                             : Supported
802.11n MCS Settings:
  MCS 0 : Supported
  MCS 1 : Supported
  MCS 2 : Supported
  MCS 3 : Supported
  MCS 4 : Supported
  MCS 5 : Supported
  MCS 6 : Supported
  MCS 7 : Supported
  MCS 8 : Supported
  MCS 9 : Supported
  MCS 10 : Supported
  MCS 11 : Supported
  MCS 12 : Supported
  MCS 13 : Supported
  MCS 14 : Supported
  MCS 15 : Supported
  MCS 16 : Supported
  MCS 17 : Supported
  MCS 18 : Supported
  MCS 19 : Supported
  MCS 20 : Supported
  MCS 21 : Supported
  MCS 22 : Supported
  MCS 23 : Supported
  MCS 24 : Supported
  MCS 25 : Supported
  MCS 26 : Supported
  MCS 27 : Supported
  MCS 28 : Supported
  MCS 29 : Supported
  MCS 30 : Supported
  MCS 31 : Supported
802.11n Status:
  A-MPDU Tx:
    Priority 0                            : Enabled
    Priority 1                            : Disabled
    Priority 2                            : Disabled
    Priority 3                            : Disabled
    Priority 4                            : Enabled
    Priority 5                            : Enabled
    Priority 6                            : Disabled
    Priority 7                            : Disabled
    Aggregation scheduler                 : Enabled
    Realtime timeout                      : 10
  A-MSDU Tx:
    Priority 0                            : Enable
    Priority 1                            : Enable
    Priority 2                            : Enable
    Priority 3                            : Enable
    Priority 4                            : Enable
    Priority 5                            : Enable
    Priority 6                            : Disable
    Priority 7                            : Disable
  Guard Interval                          : Any
  Rifs Rx                                 : Enabled
Beacon Interval                           : 100
CF Pollable mandatory                     : Disabled
CF Poll Request Mandatory                 : Disabled
CFP Period                                : 4
CFP Maximum Duration                      : 60
Default Channel                           : 1
Default Tx Power Level                    : 1
DTPC Status                               : Enabled
Call Admission Limit                      : 
G711 CU Quantum                           : 
ED Threshold                              : -50
Fragmentation Threshold                   : 2346
RSSI Low Check                           : Disabled
RSSI Threshold                            : -127 dbm
PBCC Mandatory                            : unknown
Pico-Cell-V2 Status                       : unknown
RTS Threshold                             : 2347
Short Preamble Mandatory                  : Enabled
Short Retry Limit                         : 7
Legacy Tx Beamforming setting             : Disabled
Traffic Stream Metrics Status             : Disabled
Expedited BW Request Status               : Disabled
EDCA profile type check                   : default-wmm
Call Admision Control (CAC) configuration
Voice AC
  Voice AC - Admission control (ACM)      : Disabled
  Voice Stream-Size                       : 84000
  Voice Max-Streams                       : 2
  Voice Max RF Bandwidth                  : 75
  Voice Reserved Roaming Bandwidth        : 6
  Voice Load-Based CAC mode               : Enabled
  Voice tspec inactivity timeout          : Enabled
CAC SIP-Voice configuration
  SIP based CAC                           : Disabled
  SIP call bandwidth                      : 64
  SIP call bandwith sample-size           : 20
Maximum Number of Clients per AP Radio    : 200


------------------ show ap dot11 5ghz network ------------------



802.11a Network                           : Enabled
11nSupport                                : Enabled
  802.11a Low Band                        : Enabled
  802.11a Mid Band                        : Enabled
  802.11a High Band                       : Enabled
802.11a Operational Rates
  802.11a 6M                              : Mandatory
  802.11a 9M                              : Supported
  802.11a 12M                             : Mandatory
  802.11a 18M                             : Supported
  802.11a 24M                             : Mandatory
  802.11a 36M                             : Supported
  802.11a 48M                             : Supported
  802.11a 54M                             : Supported
802.11n MCS Settings:
  MCS 0 : Supported
  MCS 1 : Supported
  MCS 2 : Supported
  MCS 3 : Supported
  MCS 4 : Supported
  MCS 5 : Supported
  MCS 6 : Supported
  MCS 7 : Supported
  MCS 8 : Supported
  MCS 9 : Supported
  MCS 10 : Supported
  MCS 11 : Supported
  MCS 12 : Supported
  MCS 13 : Supported
  MCS 14 : Supported
  MCS 15 : Supported
  MCS 16 : Supported
  MCS 17 : Supported
  MCS 18 : Supported
  MCS 19 : Supported
  MCS 20 : Supported
  MCS 21 : Supported
  MCS 22 : Supported
  MCS 23 : Supported
  MCS 24 : Supported
  MCS 25 : Supported
  MCS 26 : Supported
  MCS 27 : Supported
  MCS 28 : Supported
  MCS 29 : Supported
  MCS 30 : Supported
  MCS 31 : Supported
802.11n Status:
  A-MPDU Tx:
    Priority 0                            : Enabled
    Priority 1                            : Disabled
    Priority 2                            : Disabled
    Priority 3                            : Disabled
    Priority 4                            : Enabled
    Priority 5                            : Enabled
    Priority 6                            : Disabled
    Priority 7                            : Disabled
    Aggregation scheduler                 : Enabled
    Realtime timeout                      : 10
  A-MSDU Tx:
    Priority 0                            : Enable
    Priority 1                            : Enable
    Priority 2                            : Enable
    Priority 3                            : Enable
    Priority 4                            : Enable
    Priority 5                            : Enable
    Priority 6                            : Disable
    Priority 7                            : Disable
  Guard Interval                          : Any
  Rifs Rx                                 : Enabled
802.11ac                                  : Enabled
  Frame burst                             : Automatic
802.11ac MCS Settings:
Beacon Interval                           : 100
CF Pollable mandatory                     : Disabled
CF Poll Request Mandatory                 : Disabled
CFP Period                                : 4
CFP Maximum Duration                      : 60
Default Channel                           : 36
Default Tx Power Level                    : 1
DTPC Status                               : Enabled
Fragmentation Threshold                   : 2346
RSSI Low Check	                          : Disabled
RSSI Threshold                            : -127 dbm
Pico-Cell-V2 Status                       : unknown
TI Threshold                              : 
Legacy Tx Beamforming setting             : Disabled
Traffic Stream Metrics Status             : Disabled
Expedited BW Request Status               : Disabled
EDCA profile type check                   : default-wmm
Call Admision Control (CAC) configuration
Voice AC
  Voice AC - Admission control (ACM)      : Disabled
  Voice Stream-Size                       : 84000
  Voice Max-Streams                       : 2
  Voice Max RF Bandwidth                  : 75
  Voice Reserved Roaming Bandwidth        : 6
  Voice Load-Based CAC mode               : Enabled
  Voice tspec inactivity timeout          : Enabled
CAC SIP-Voice configuration
  SIP based CAC                           : Disabled
  SIP call bandwidth                      : 64
  SIP call bandwith sample-size           : 20
Maximum Number of Clients per AP Radio    : 200


------------------ show ap dot11 24ghz txpower ------------------


Automatic Transmit Power Assignment

Transmit Power Assignment Mode          : AUTO
Transmit Power Update Interval          : 600 seconds 
Transmit Power Threshold                : -70 dBm
Transmit Power Neighbor Count           : 3 APs
Min Transmit Power                      : -10 dBm
Max Transmit Power                      : 30 dBm
Update Contribution
    Noise                               : Enable
    Interference                        : Enable
    Load                                : Disable
    Device Aware                        : Disable
Transmit Power Assignment Leader        : ewlc-doc (9.12.32.10)
Last Run                                : 558 seconds ago


------------------ show ap dot11 5ghz txpower ------------------


Automatic Transmit Power Assignment

Transmit Power Assignment Mode          : AUTO
Transmit Power Update Interval          : 600 seconds 
Transmit Power Threshold                : -70 dBm
Transmit Power Neighbor Count           : 3 APs
Min Transmit Power                      : -10 dBm
Max Transmit Power                      : 30 dBm
Update Contribution
    Noise                               : Enable
    Interference                        : Enable
    Load                                : Disable
    Device Aware                        : Disable
Transmit Power Assignment Leader        : ewlc-doc (9.12.32.10)
Last Run                                : 558 seconds ago


------------------ show ap auto-rf dot11 5ghz ------------------



------------------ show ap auto-rf dot11 24ghz ------------------



------------------ show ap config general ------------------




------------------ show ap dot11 5ghz optimized-roaming ------------------

802.11a OptimizedRoaming

  Mode                                  : Disabled
  Reporting Interval                    : 90 seconds
  Rate Threshold                        : Disabled 
  Hysteresis                            : 6 db


------------------ show ap rf-profile summary ------------------



Number of RF-profiles: 6

RF Profile Name                  Band     Description                          State 
------------------------------------------------------------------------------------
Low_Client_Density_rf_5gh        5 GHz    pre configured Low Client Density rf Up    
High_Client_Density_rf_5gh       5 GHz    pre configured High Client Density r Up    
Low_Client_Density_rf_24gh       2.4 GHz  pre configured Low Client Density rf Up    
High_Client_Density_rf_24gh      2.4 GHz  pre configured High Client Density r Up    
Typical_Client_Density_rf_5gh    5 GHz    pre configured Typical Density rfpro Up    
Typical_Client_Density_rf_24gh   2.4 GHz  pre configured Typical Client Densit Up    


------------------ show ap fra ------------------

FRA State                                             : Disabled
FRA Sensitivity                                       : medium (95%)
FRA Interval                                          : 1 Hour(s)
  Last Run                                            : 2299 seconds ago
  Last Run time                                       : 0 seconds

AP Name              MAC Address       Slot ID  Current-Band      COF %      Suggested Mode
-------------------------------------------------------------------------------------------

COF : Coverage Overlap Factor


------------------ show wireless band-select ------------------


Band Select Probe Response   : per WLAN enabling
Cycle Count                  : 2
Cycle Threshold (millisec)   : 200
Age Out Suppression (sec)    : 20
Age Out Dual Band (sec)      : 60
Client RSSI (dBm)            : -80
Client Mid RSSI (dBm)        : -80


------------------ show wireless  country  configure ------------------



Configured Country..........................   US - United States                       
Configured Country Codes
        US  - United States                  802.11a Indoor/ 802.11b Indoor/ 802.11g Indoor 


------------------ show wireless tag rf summary ------------------



Number of RF Tags: 1

RF tag name                       Description                             
------------------------------------------------------------------------
default-rf-tag                    default RF tag                          


------------------ show ap tag summary ------------------


Number of APs: 0



------------------ show ap status ------------------



------------------ show ap uptime ------------------


Number of APs: 0

show tunnel eogre global-configuration

To display the Ethernet over GRE (EoGRE) global configuration, use the show tunnel eogre global-configuration command.

show tunnel eogre global-configuration

Syntax Description


This command has no keywords or arguments.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.11.1	This command was introduced.

Examples

This example shows how to display the EoGRE global configuration:

Device# show tunnel eogre global-configuration 

Heartbeat interval       : 60
Max Heartbeat skip count : 3
Source Interface         : (none)

show tunnel eogre domain detailed

To display the detailed information of the Ethernet over GRE (EoGRE) tunnel domain, use the show tunnel eogre domain detailed command.

show tunnel eogre domain detailed domain-name

Syntax Description


`domain-name`	EoGRE domain name.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.11.1	This command was introduced.

Examples

This example shows how to display the detailed information of the EoGRE tunnel domain:

Device# show tunnel eogre domain detailed eogre_domain

Domain Name    : eogre_domain
 Primary GW    : Tunnel1
 Secondary GW  : Tunnel2
 Active GW     : Tunnel1
 Redundancy    : Non-Revertive

show tunnel eogre domain summary

To display the summary information of the Ethernet over GRE (EoGRE) tunnel domain, use the show tunnel eogre domain summary command.

show tunnel eogre domain summary

Syntax Description


This command has no keywords or arguments.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.11.1	This command was introduced.

Examples

This example shows how to display the summary information of the EoGRE tunnel domain:

Device# show tunnel eogre domain summary 

Domain Name         Primary GW   Secondary GW      Active GW      Redundancy
-------------------------------------------------------------------------------
domain1             Tunnel1      Tunnel2           Tunnel1        Non-Revertive
eogre_domain        Tunnel1      Tunnel2           Tunnel1        Non-Revertive

show tunnel eogre gateway summary

To display the summary information of the Ethernet over GRE (EoGRE) tunnel gateway, use the show tunnel eogre gateway summary command.

show tunnel eogre gateway summary

Syntax Description


This command has no keywords or arguments.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.11.1	This command was introduced.

Examples

This example shows how to display the summary information of the EoGRE tunnel gateway:

Device# show tunnel eogre gateway summary

Name               Type  Address                                  AdminState  State  Clients
---------------------------------------------------------------------------------------------
Tunnel1            IPv4  9.51.1.11                                Up          Up     0       
Tunnel2            IPv4  9.51.1.12                                Up          Down   0       
Tunnel10           IPv6  fd09:9:8:21::90                          Down        Down   0       
Tunnel11           IPv4  9.51.1.11                                Up          Up     0       
Tunnel12           IPv6  fd09:9:8:21::90                          Up          Down   0       
Tunnel100          IPv4  9.51.1.100                               Up          Down   0

show tunnel eogre gateway detailed

To display the detailed information of the Ethernet over GRE (EoGRE) tunnel domain, use the show tunnel eogre gateway detailed command.

show tunnel eogre gateway detailed gateway-name

Syntax Description


`gateway-name`	EoGRE gateway name.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.11.1	This command was introduced.

Examples

This example shows how to display the detailed information of the EoGRE tunnel gateway:

Device# show tunnel eogre domain detailed Tunnel1

Gateway : Tunnel1
 Mode   : IPv4
 IP     : 9.51.1.11
 Source : Vlan51 / 9.51.1.1
 State  : Up
 SLA ID : 56
 MTU    : 1480
 Up Time: 4 minutes 45 seconds 

 Clients
  Total Number of Wireless Clients      : 0
 Traffic
  Total Number of Received Packets      : 0
  Total Number of Received Bytes        : 0
  Total Number of Transmitted Packets   : 0
  Total Number of Transmitted Bytes     : 0
 Keepalives
  Total Number of Lost Keepalives       : 0
  Total Number of Received Keepalives   : 5
  Total Number of Transmitted Keepalives: 5
  Windows                               : 1
  Transmitted Keepalives in last window : 2
  Received Keepalives in last window    : 2

show tunnel eogre manager stats global

To display the global tunnel manager statistics, use the show tunnel eogre manager stats global command.

show tunnel eogre manager stats global

Syntax Description


This command has no keywords or arguments.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.11.1	This command was introduced.

Examples

This example shows how to display the global tunnel manager statistics:

Device# show tunnel eogre manager stats global 

Tunnel Global Statistics
Last Updated                     : 02/18/2019 23:50:35
EoGRE Objects
  Gateways                       : 6
  Domains                        : 2

EoGRE Flex Objects
  AP Gateways                    : 2
  AP Domains                     : 1
  AP Gateways HA inconsistencies : 0
  AP Domains HA inconsistencies  : 0

Config events
  IOS Tunnel updates             : 806
  IOS Domain updates             : 88
  Global updates                 : 48
  Tunnel Profile updates         : 120
  Tunnel Rule updates            : 16
  AAA proxy key updates          : 0

AP events
  Flex AP Join                   : 1
  Flex AP Leave                  : 0
  Local AP Join                  : 0
  Local AP leave                 : 0
  Tunnel status (rx)             : 4
  Domain status (rx)             : 1
  IAPP stats msg (rx)            : 3
  Client count (rx)              : 6
  VAP Payload msg (tx)           : 4
  Domain config (tx)             : 1
  Global config (tx)             : 1
  Client delete (tx)             : 1
  Client delete per domain (tx)  : 3
  DHCP option 82 (tx)            : 4

Client events
  Add-mobile                     : 2
  Run-State                      : 3
  Delete                         : 1
  Cleanup                        : 0
  Join                           : 2
  Plumb                          : 0
  Join Errors                    : 0
  HandOff                        : 0
  MsPayload                      : 2
  FT Recover                     : 0
  Zombie GW counter increase     : 0
  Zombie GW counter decrease     : 0
  Tunnel Profile reset           : 88
  Client deauth                  : 0
  HA reconciliation              : 0

Client Join Events
  Generic Error                  : 0
  MSPayload Fail                 : 0
  Invalid VLAN                   : 0
  Invalid Domain                 : 0
  No GWs in Domain               : 0
  Domain Shut                    : 0
  Invalid GWs                    : 0
  GWs Down                       : 0
  Rule Match Error               : 0
  AAA-override                   : 0
  Flex No Active GW              : 0
  Open Auth join attempt         : 2
  Dot1x join attempt             : 2
  Mobility join attempt          : 0
  Tunnel Profile not valid       : 2
  Tunnel Profile valid           : 2
  No rule match                  : 0
  Rule match                     : 2
  AAA proxy                      : 0
  AAA proxy accounting           : 0
  AAA eogre attributes           : 0
  Has aaa override               : 0
  Error in handoff payload       : 0
  Handoff AAA override           : 0
  Handoff no AAA override        : 0
  Handoff payload received       : 0
  Handoff payload sent           : 0

SNMP Traps
  Client                         : 0
  Tunnel                         : 2
  Domain                         : 0

IPC
  IOSd TX messages               : 0

Zombie Client
  Entries                        : 0

show tunnel eogre manager stats instance

To display the tunnel manager statistics for a specific WNCd instance, use the show tunnel eogre manager stats instance command.

show tunnel eogre manager stats instance instance-number

Syntax Description


`instance-number`	WNCd instance number.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.11.1	This command was introduced.

Examples

This example shows how to display the tunnel manager statistics for a specific WNCd instance:

Device# show tunnel eogre manager stats instance 0

Tunnel Manager statistics for process instance : 0
Last Updated                     : 02/18/2019 23:50:35
EoGRE Objects
  Gateways                       : 6
  Domains                        : 2

EoGRE Flex Objects
  AP Gateways                    : 2
  AP Domains                     : 1
  AP Gateways HA inconsistencies : 0
  AP Domains HA inconsistencies  : 0

Config events
  IOS Tunnel updates             : 102
  IOS Domain updates             : 11
  Global updates                 : 6
  Tunnel Profile updates         : 15
  Tunnel Rule updates            : 2
  AAA proxy key updates          : 0

AP events
  Flex AP Join                   : 1
  Flex AP Leave                  : 0
  Local AP Join                  : 0
  Local AP leave                 : 0
  Tunnel status (rx)             : 4
  Domain status (rx)             : 1
  IAPP stats msg (rx)            : 3
  Client count (rx)              : 6
  VAP Payload msg (tx)           : 4
  Domain config (tx)             : 1
  Global config (tx)             : 1
  Client delete (tx)             : 1
  Client delete per domain (tx)  : 3
  DHCP option 82 (tx)            : 4

Client events
  Add-mobile                     : 2
  Run-State                      : 3
  Delete                         : 1
  Cleanup                        : 0
  Join                           : 2
  Plumb                          : 0
  Join Errors                    : 0
  HandOff                        : 0
  MsPayload                      : 2
  FT Recover                     : 0
  Zombie GW counter increase     : 0
  Zombie GW counter decrease     : 0
  Tunnel Profile reset           : 11
  Client deauth                  : 0
  HA reconciliation              : 0

Client Join Events
  Generic Error                  : 0
  MSPayload Fail                 : 0
  Invalid VLAN                   : 0
  Invalid Domain                 : 0
  No GWs in Domain               : 0
  Domain Shut                    : 0
  Invalid GWs                    : 0
  GWs Down                       : 0
  Rule Match Error               : 0
  AAA-override                   : 0
  Flex No Active GW              : 0
  Open Auth join attempt         : 2
  Dot1x join attempt             : 2
  Mobility join attempt          : 0
  Tunnel Profile not valid       : 2
  Tunnel Profile valid           : 2
  No rule match                  : 0
  Rule match                     : 2
  AAA proxy                      : 0
  AAA proxy accounting           : 0
  AAA eogre attributes           : 0
  Has aaa override               : 0
  Error in handoff payload       : 0
  Handoff AAA override           : 0
  Handoff no AAA override        : 0
  Handoff payload received       : 0
  Handoff payload sent           : 0

SNMP Traps
  Client                         : 0
  Tunnel                         : 2
  Domain                         : 0

IPC
  IOSd TX messages               : 0

Zombie Client
  Entries                        : 0

show wireless stats ap history

To verify historical statistics of an AP, use the show wireless stats ap history command.

show wireless stats ap history

Syntax Description


This command has no keywords or arguments.

Command Default

None

Command Modes

Privileged EXEC#

Command History


Release	Modification
Cisco IOS XE Cupertino 17.7.1	This command was introduced.

Examples

This example shows how to verify the statistics of the access point hisory:

Device# show wireless stats ap history
AP Name             Radio MAC       Event      Time               Recent      Disconnect Reason          Disconnect 
                                                                  Disconnect  Reason                     Count
                                                                  Time
------------------------------------------------------------------------------------------------------------------------
APA023.9FD8.EA22   40ce.24bf.8ca0  Joined     06/26/21 10:11:52  NA           NA                         NA
APA023.9FD8.EA22   40ce.24bf.8ca0  Disjoined  06/26/21 10:05:18  NA           Heart beat timer expiry    1
APA023.9FD8.EA22   40ce.24bf.8ca0  Joined     06/22/21 17:00:39  NA           NA                         NA
APA023.9FD8.EA22   40ce.24bf.8ca0  Disjoined  06/22/21 16:54:54  NA           Heart beat timer expiry    1
APA023.9FD8.EA22   40ce.24bf.8ca0  Joined     06/21/21 23:01:17  NA           NA                         NA
APA023.9FD8.EA22   40ce.24bf.8ca0  Disjoined  06/21/21 22:56:21  NA           Image Download Success     1

show wireless band-select

To display the status of the band-select configuration, use the show wireless band-select command in privileged EXEC mode.

show wireless band-select

Syntax Description


This command has no arguments or keywords.

Command Default

No default behavior or values.

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.1	This command was introduced.

Examples

The following is sample output from the show wireless band-select command:

Device# show wireless band-select
Band Select Probe Response    : per WLAN enabling
Cycle Count                  : 2
Cycle Threshold (millisec)   : 200
Age Out Suppression (sec)    : 20
Age Out Dual Band (sec)      : 60
Client RSSI (dBm)            : 80

show wireless client

To see the summary of the classified devices, use the show wireless client command.

show wireless client device {cache | count | summary } | {steering} [chassis {chassis-number | active | standby }]R0

Syntax Description


device	Shows classified devices.
steering	Wireless client steering information
cache	Shows the cached classified device summary.
count	Shows the wireless device count.
summary	Shows the active classified device summary.
`chassis-number`	Chassis number. Valid range is 1–2.
active	Active instance.
standby	Standby instance.
R0	Route-Processor slot 0.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced in a release earlier than Cisco IOS XE Gibraltar 16.10.1.

Examples

The following example shows how to see the summary of the classified devices:

Device# show wireless client device summary

show wireless client mac-address

To view detailed information of a client using its mac-address, use the show wireless client mac-addressdetail command.

show wireless client mac-address mac-address detail [ chassis {chassis-number | active | standby} R0]

Syntax Description


`mac-address`	Client MAC address.
`chassis-number`	Chassis number. Valid range is 1–2.
active	Active instance.
standby	Standby instance.
R0	Route-Processor slot 0.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced in a release earlier than Cisco IOS XE Gibraltar 16.10.1.

Usage Guidelines

The Client Scan Reports section in the output of the show wireless client mac-address detail is populated only for the following Apple devices:

Any iPhone 7 and running iOS 11.0 or higher
Any iPad after iPad Pro (1st gen, 12.9-inch, 2015) and running iOS 11.0 or higher

Other client devices, even if it supports 802.11k or is Wi-Fi Agile Multiband (MBO) certified, are not currently supported to populate the Client Scan Reports section.

Client ACLs shown under show wireless client mac-address <mac address> detail are ACLs applied on the client in Flexconnect local authentication case with MAB+Web authentication WLAN with AAA override enabled. This is applicable only for Express Wi-Fi by Facebook Policy on Controller. For more information about Facebook policy, see Express Wi-Fi by Facebook.

From Cisco IOS XE Amsterdam 17.3.1 onwards, the controller retains client session for 10 seconds. This feature is applicable for clients in the RUN state and is supported on central authentication with local and flex mode.

In idle state, 10 sec represents idle state timeout and 09 sec represent remaining time out of 10 sec. An example is given below:

Idle state timeout : 10 sec (Remaining time: 09 sec)

Examples

The following example shows how to see detailed client information using its MAC address:

Device# show wireless client mac-address 98-XX-7B-XX-EF-XX detail

show wireless client mac-address (Call Control)

To view call control information related to clients, use the show wireless client mac-address command in privileged EXEC mode.

show wireless client mac-address mac-address call-control call-info

Syntax Description


`mac-address`	The client MAC address.
call-control call-info	Displays the call control and IP-related information about a client.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
	This command was introduced.

Examples

This example shows how to display call control and IP-related information about a client:

Device# show wireless client mac-address  30e4.db41.6157 call-control call-info
Client MAC Address        : 30E4DB416157

Call 1 Statistics

Uplink IP Address         : 209.165.200.225
Downlink IP Address       : 209.165.200.226
Uplink Port               : 29052
Downlink Port             : 27538
Call ID                   : c40acb4d-3b3b0.3d27da1e-356bed03
Called Party              : sip:1011
Calling Party             : sip:1012
Priority                  : 6
Call On Hold              : false
Call Duration             : 30

Call 2 Statistics

No Active Call

show wireless client mac-address (TCLAS)

To view information about TCLAS and user priority, use the show wireless client mac-address command in privileged EXEC mode.

show wireless client mac-address mac-address tclas

Syntax Description


`mac-address`	The client MAC address.
tclas	Displays TCLAS and user priority-related information about a client.

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.1	This command was introduced.

Examples

This example shows how to display the TCLAS and user priority-related information about a client:

Device# show wireless client mac-address 30e4.db41.6157 tclas
MAC Address      UP TID Mask Source IP Addr  Dest IP Addr    SrcPort DstPort Proto
----------------------------------------------------------------------------------
30e4.db41.6157    4   4   95 167838052       2164326668      5060     5060      6
30e4.db41.6157    6   1   31 0               2164326668      0        27538    17

show wireless client summary

To display a summary of active clients associated with the controller, use the show wireless client summary command in privileged EXEC mode.

show wireless client summary

Syntax Description

This command has no arguments or keywords.

Command Default

No default behavior or values.

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced.

Usage Guidelines

The following is sample output from the show wireless client summary command:

Use the show wireless exclusionlist command to display clients on the exclusion list.

Examples

Device# show wireless client summary

Number of Clients: 1    

MAC Address       AP Name                 Type ID  State  Protocol  Method  Role  
--------------------------------------------------------------------------------  
6c40.0899.0466    9115i-r4-sw2-te1-0-37   WLAN 7   Run    11ac      None    Local

show wireless client timers

To display 802.11 system timers, use the show wireless client timers command in privileged EXEC mode.

show wireless client timers

Syntax Description

This command has no arguments or keywords.

Command Default

No default behavior or values.

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.1	This command was introduced.

Examples

The following is sample output from the show wireless client timers command:

Device# show wireless client timers
 Authentication Response Timeout (seconds)      : 10

show wireless country

To display the configured country and the radio types supported, use the show wireless country command in privileged EXEC mode.

show wireless country {channels | configured | supported [tx-power]}

Syntax Description


channels	Displays the list of possible channels for each band, and the list of channels allowed in the configured countries.
configured	Display configured countries.
supported tx-power	Displays the list of allowed Tx powers in each supported country.

Command Default

No default behavior or values.

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.1	This command was introduced.

Examples

The following is sample output from the show wireless country channels command:

Device# show wireless country channels
  Configured Country.............................: US  - United States
      KEY: * = Channel is legal in this country and may be configured manually.
           A = Channel is the Auto-RF default in this country.
           . = Channel is not legal in this country.
           C = Channel has been configured for use by Auto-RF.
           x = Channel is available to be configured for use by Auto-RF.
         (-,-) = (indoor, outdoor) regulatory domain allowed by this country.
-----------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-
    802.11bg     :
    Channels     :                   1 1 1 1 1
                 : 1 2 3 4 5 6 7 8 9 0 1 2 3 4
-----------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-
 (-A   ,-AB  )  US  :  A * * * * A * * * * A . . .
 Auto-RF         : . . . . . . . . . . . . . .
-----------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
 802.11a         :                         1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
 Channels        : 3 3 3 4 4 4 4 4 5 5 6 6 0 0 0 1 1 2 2 2 3 3 4 4 5 5 6 6
                 : 4 6 8 0 2 4 6 8 2 6 0 4 0 4 8 2 6 0 4 8 2 6 0 9 3 7 1 5
-----------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
 (-A   ,-AB  )  US  :  . A . A . A . A A A A A * * * * * . . . * * * A A A A *
 Auto-RF         : . . . . . . . . . . . . . . . . . . . . . . . . . . . .
-----------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
 4.9GHz 802.11a  :
   Channels      :                   1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2
                 : 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6
-----------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
 US (-A   ,-AB  ): * * * * * * * * * * * * * * * * * * * A * * * * * A
 Auto-RF         : . . . . . . . . . . . . . . . . . . . . . . . . . .
-----------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-

The following is sample output from the show wireless country configured command:

Device# show wireless country configured
 Configured Country.............................: US  - United States
 Configured Country Codes
        US  - United States : 802.11a Indoor,Outdoor/ 802.11b / 802.11g

The following is sample output from the show wireless country supported tx-power command:

Device# show wireless country supported tx-power
      KEY: ##    = Tx Power in dBm.
           ##*   = Channel supports radar detection .
           .     = Channel is not legal in this country.
           (-)   = Regulatory Domains allowed by this country.
           (-,-) = (indoor, outdoor) regulatory Domains allowed by this country.
-----------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-
    802.11bg     :
    Channels     :                   1 1 1 1 1
                 : 1 2 3 4 5 6 7 8 9 0 1 2 3 4
-----------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-
 (-CE  ,-CE  )  AE  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-E   )  AL  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-A   ,-AR  )  AR  :  27 27 27 27 27 27 27 27 27 27 27  .  .  .
 (-E   ,-E   )  AT  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-A   ,-NA  )  AU  :  27 27 27 27 27 27 27 27 27 27 27  .  .  .
 (-E   ,-    )  BA  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-E   )  BE  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-E   )  BG  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-    )  BH  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-A   ,-A   )  BO  :  27 27 27 27 27 27 27 27 27 27 27  .  .  .
 (-A   ,-AR  )  BR  :  27 27 27 27 27 27 27 27 27 27 27  .  .  .
 (-E   ,-    )  BY  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-A   ,-ABN )  CA  :  27 27 27 27 27 27 27 27 27 27 27  .  .  .
 (-A   ,-ABN )  CA2 :  27 27 27 27 27 27 27 27 27 27 27  .  .  .
 (-E   ,-E   )  CH  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-AER ,-AR  )  CL  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-E   )  CM  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-CE  ,-CE  )  CN  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-A   ,-AR  )  CO  :  27 27 27 27 27 27 27 27 27 27 27  .  .  .
 (-A   ,-AB  )  CR  :  27 27 27 27 27 27 27 27 27 27 27  .  .  .
 (-E   ,-E   )  CY  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-E   )  CZ  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-E   )  DE  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-E   )  DK  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-A   ,-ABN )  DO  :  27 27 27 27 27 27 27 27 27 27 27  .  .  .
 (-E   ,-    )  DZ  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-A   ,-AB  )  EC  :  27 27 27 27 27 27 27 27 27 27 27  .  .  .
 (-E   ,-E   )  EE  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-E   )  EG  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-E   )  ES  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-E   )  FI  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-E   )  FR  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-E   )  GB  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-E   )  GI  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-E   )  GR  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-A   ,-NA  )  HK  :  27 27 27 27 27 27 27 27 27 27 27  .  .  .
 (-E   ,-    )  HR  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-E   )  HU  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-ER  )  ID  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-E   )  IE  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-EI  ,-IE  )  IL  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-I   ,-I   )  ILO :   .  .  .  . 20 20 20 20 20 20 20 20 20  .
 (-A   ,-AN  )  IN  :  27 27 27 27 27 27 27 27 27 27 27  .  .  .
 (-E   ,-E   )  IQ  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-E   )  IS  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-E   )  IT  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-JPU ,-JPU )  J2  :  23 23 23 23 23 23 23 23 23 23 23 23 23 23
 (-JPU ,-JPU )  J3  :  23 23 23 23 23 23 23 23 23 23 23 23 23 23
 (-JPQU,-PQ  )  J4  :  23 23 23 23 23 23 23 23 23 23 23 23 23 23
 (-E   ,-    )  JO  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-JPU ,-JPU )  JP  :  23 23 23 23 23 23 23 23 23 23 23 23 23 23
 (-ACE ,-ACEK)  KE  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-E   )  KN  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-ACE ,-ACEK)  KR  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-E   )  KW  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-E   )  KZ  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-E   )  LB  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-E   )  LI  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,     )  LK  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-E   )  LT  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-E   )  LU  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-E   )  LV  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-E   )  MC  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-E   )  ME  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-E   )  MK  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,     )  MO  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-E   )  MT  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-A   ,-NA  )  MX  :  27 27 27 27 27 27 27 27 27 27 27  .  .  .
 (-ACE ,-AEC )  MY  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-E   )  NL  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-E   )  NO  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-A   ,-NA  )  NZ  :  27 27 27 27 27 27 27 27 27 27 27  .  .  .
 (-E   ,-E   )  OM  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-A   ,-AR  )  PA  :  27 27 27 27 27 27 27 27 27 27 27  .  .  .
 (-A   ,-AR  )  PE  :  27 27 27 27 27 27 27 27 27 27 27  .  .  .
 (-A   ,-ABN )  PH  :  27 27 27 27 27 27 27 27 27 27 27  .  .  .
 (-A   ,-ABN )  PH2 :  27 27 27 27 27 27 27 27 27 27 27  .  .  .
 (-E   ,-E   )  PK  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-E   )  PL  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-A   ,-A   )  PR  :  27 27 27 27 27 27 27 27 27 27 27  .  .  .
 (-E   ,-E   )  PT  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-A   ,-A   )  PY  :  27 27 27 27 27 27 27 27 27 27 27  .  .  .
 (-E   ,-E   )  QA  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-E   )  RO  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-E   )  RS  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-AER ,-ER  )  RU  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-AE  ,-AE  )  SA  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-E   )  SE  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-SE  )  SG  :  20 20 20 20 20 20 20 20 20 20 20 20 20 20
 (-E   ,-E   )  SI  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-E   )  SK  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-ER  )  TH  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-E   )  TN  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-EI  ,-E   )  TR  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-A   ,-ANT )  TW  :  27 27 27 27 27 27 27 27 27 27 27  .  .  .
 (-E   ,-E   )  UA  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-A   ,-AB  )  US  :  27 27 27 27 27 27 27 27 27 27 27  .  .  .
 (-A   ,-AB  )  US2 :  27 27 27 27 27 27 27 27 27 27 27  .  .  .
 (-A   ,-AB  )  USL :  27 27 27 27 27 27 27 27 27 27 27  .  .  .
 (-A   ,-    )  USX :  27 27 27 27 27 27 27 27 27 27 27  .  .  .
 (-A   ,-A   )  UY  :  27 27 27 27 27 27 27 27 27 27 27  .  .  .
 (-A   ,-AR  )  VE  :  27 27 27 27 27 27 27 27 27 27 27  .  .  .
 (-E   ,-E   )  VN  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .
 (-E   ,-E   )  ZA  :  20 20 20 20 20 20 20 20 20 20 20 20 20  .

show wireless detail

To display the details of the wireless parameters configured, use the show wireless detail command in privileged EXEC mode.

show wireless detail

Syntax Description

This command has no arguments or keywords.

Command Default

No default behavior or values.

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.1	This command was introduced.

Usage Guidelines

The following parameters are displayed:

The wireless user idle timeout
The controller configured RF group name
Fast SSID change

Examples

The following is sample output from the show wireless detail command:

Device# show wireless detail
User Timeout               : 300
RF network                 : default
Fast SSID                  : Disabled

show wireless dhcp relay statistics

To configure the wireless DHCP relay on the AP, use the show wireless dhcp relay statistic command.

show wireless dhcp relay statistic

Syntax Description


`A.B.C.D`	Indicates the target IPv4 address.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Gibraltar 17.3.1	This command was introduced.

Examples

The following example shows how to configure the wireless DHCP relay on the AP:

Device# show wireless dhcp relay statistics ip-address 10.1.1.1

show wireless dot11h

To see 802.11h configuration details, use the show wireless dot11h command.

show wireless dot11h[ chassis {chassis-number | active | standby} R0]

Syntax Description


`chassis-number`	Chassis number. Valid range is 1–2.
active	Active instance.
standby	Standby instance.
R0	Route-Processor slot 0.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced in a release earlier than Cisco IOS XE Gibraltar 16.10.1.

Examples

The following example shows how to see the 802.11h configuration details:

Device# show wireless dot11h

show wireless dtls connections

To display the Datagram Transport Layer Security (DTLS) server status, use the show wireless dtls connections command in privileged EXEC mode.

show wireless dtls connections

Syntax Description

This command has no arguments or keywords.

Command Default

No default behavior or values.

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.1	This command was introduced.

Examples

The following is sample output from the show wireless dtls connections command:

Device# show wireless dtls connections
 AP Name         Local Port   Peer IP    Peer Port  Ciphersuite
----------------------------------------------------------------------
  AP-2       Capwap_Ctrl   10.0.0.16     52346      TLS_RSA_WITH_AES_128_CBC_SHA
  AP-3       Capwap_Ctrl   10.0.0.17     52347      TLS_RSA_WITH_AES_128_CBC_SHA

show wireless exclusionlist

To see the wireless exclusion list, use the show wireless exclusionlist command.

show wireless exclusionlist [client mac-address client-mac-addr detail ] [ chassis {chassis-number | active | standby} R0]

Syntax Description


`client-mac-addr`	Client MAC address.
`chassis-number`	Enter the chassis number as either 1 or 2.
active R0	Active instance of the configuration in Route-processor slot 0.
standby R0	Standby instance of the configuration in Route-processor slot 0.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced in a release earlier than Cisco IOS XE Gibraltar 16.10.1.

Examples

The following example shows how to see the wireless exclusion list:

Device# show wireless exclusionlist 

Excluded Clients

MAC Address       Description          Exclusion Reason               Time Remaining  
-----------------------------------------------------------------------------------------
10da.4320.cce9                         Client Policy  failure          59

show wireless load-balancing

To display the status of the load-balancing feature, use the show wireless load-balancing command in privileged EXEC mode.

show wireless load-balancing

Syntax Description

This command has no arguments or keywords.

Command Default

No default behavior or values.

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.1	This command was introduced.

Examples

The following is sample output from the show wireless load-balancing command:

 > show wireless load-balancing
Aggressive Load Balancing............................: per WLAN enabling
Aggressive Load Balancing Window (clients).................:: 5
Aggressive Load Balancing Denial Count.....................:: 3

Statistics
Total Denied Count (clients)................................:: 0
Total Denial Sent (messages)................................:: 0
Exceeded Denial Max Limit Count (times).....................:: 0
None 5G Candidate Count (times).............................:: 0
None 2.4G Candidate Count (times)...........................:: 0

show wireless mesh rrm dca status

To display the status of the last DCA run per radio, use the show wireless mesh rrm dca status command.

show wireless mesh rrm dca status

Syntax Description


This command has no keywords or arguments.

Command Default

None

Command Modes

Privileged EXEC(#)

Command History


Release	Modification
Cisco IOS XE Cupertino 17.9.1	This command was introduced.

Examples

This example shows how to display the status of the last DCA run per radio:

Device# show wireless mesh rrm dca status

show wireless ewc-ap ap summary

To view the embedded wireless controller AP summary , use the show wireless ewc-ap ap summary command.

show wireless ewc-ap ap summary [ chassis { chassis_number | active | standby} { R0} ]

Syntax Description


ewc-ap	Configures the embedded wireless controller parameters.
ap summary	Displays the embedded wireless controller AP, AP summary.
chassis	Indicates the details of the chassis.
`chassis-number`	Indicates the chassis number, which is either 1 or 2..
R0	Indicates Route Processor slot 0.
Active	Indicates the active operational mode of the AP chassis.
Standby	Indicates the standby operational mode of the AP chassis.

Command Default

None

Command Modes

Privileged EXEC mode

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.2s	This command was introduced.

Examples

The following example shows how to view the embedded wireless controller, AP summary:

Device#show wireless ewc-ap ap summary

show wireless ewc-ap ap config-sync

To view the embedded wireless controller AP configuration synchronization information or summary, use the show wireless ewc-ap ap config-sync command.

show wireless ewc-ap ap config-sync summary [ chassis { chassis_number | active | standby} { R0} ]

Syntax Description


config-sync	Configures the embedded wireless controller parameters.

Command Default

None

Command Modes

Privileged EXEC mode

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.2s	This command was introduced.

Examples

The following example shows how to view the embedded wireless controller AP configuration synchronization information or summary:

Device#show wireless ewc-ap ap config-sync summary

show wireless ewc-ap ap image predownload status

To view the AP image predownload statistics, use the show wireless ewc-ap ap image predownload status command.

show wireless ewc-ap ap image predownload status

Syntax Description


This command has no keywords or arguments.

Command Default

None

Command Modes

Privileged EXEC mode

Command History


Release	Modification
Cisco IOS XE Amsterdam 17.3.1	This command was introduced.

Usage Guidelines

None

Examples

The following example shows how to view the AP image predownload statistics:

Device#show wireless ewc-ap ap image predownload status

show wireless ewc-ap country-code

To view the default country codes and the supported country codes of the embedded wireless controller AP, use the show wireless ewc-ap country-code command.

show wireless ewc-ap country-code [ chassis { chassis_number | active | standby} { R0} ]

Syntax Description


country-code	Indicates the default country codes and the supported country codes.

Command Default

None

Command Modes

Privileged EXEC mode

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.2s	This command was introduced.

Examples

The following example shows how to view the default and supported country codes of embedded wireless controller AP:

Device#show wireless ewc-ap country-codes

show wireless ewc-ap image-master

To view the image maser information, use the show wireless ewc-ap image-master command.

show wireless ewc-ap image-master [ chassis { chassis_number | active | standby} { R0} ]

Syntax Description


image-master	Indicates the image master information.

Command Default

None

Command Modes

Privileged EXEC mode

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.2s	This command was introduced.

Examples

The following example shows how to view the image master information:

Device#show wireless ewc-ap image-master

show wireless ewc-ap invalid-image-master

To view the details of the invalid image master, use the show wireless ewc-ap invalid-image-master command.

show wireless ewc-ap invalid-image-master [ chassis { chassis_number | active | standby} { R0} ]

Syntax Description


invalid-image-master	Indicates the invalid image master information.

Command Default

None

Command Modes

Privileged EXEC mode

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.2s	This command was introduced.

Examples

The following example shows how to view the invalid image master information:

Device#show wireless ewc-ap invalid-image-master

show wireless ewc-ap predownload

To view the image predownload information, use the show wireless ewc-ap predownload command.

show wireless ewc-ap predownload { count | status} [ chassis { chassis_number | active | standby} { R0} ]

Syntax Description


predownload	Indicates the image predownload information.
count	Indicates the image predownload count.
status	Indicates the image predownload status.

Command Default

None

Command Modes

Privileged EXEC mode

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.2s	This command was introduced.

Examples

The following example shows how to view the image predownload count and status:

Device#show wireless ewc-ap predownload

show wireless ewc-ap redundancy summary

To view the HA redundancy summary, use the show wireless ewc-ap redundancy summary command.

show wireless ewc-ap redundancy summary [ chassis { chassis_number | active | standby} { R0} ]

Syntax Description


redundancy	Indicates the HA redundancy information.
summary	Indicates the summary of HA redundancy.

Command Default

None

Command Modes

Privileged EXEC mode

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.1	This command was introduced.

Examples

The following example shows how to view the default and supported country codes of embedded wireless controller AP:

Device#show wireless ewc-ap redundancy summary

show wireless ewc-ap redundancy peers

To view the HA redundancy peers, use the show wireless ewc-ap redundancy peers command.

show wireless ewc-ap redundancy peers [ chassis { chassis_number | active | standby} { R0} ]

Syntax Description


redundancy	Indicates the HA redundancy information.
peers	Indicates the peers of HA redundancy.

Command Default

None

Command Modes

Privileged EXEC mode

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.1	This command was introduced.

Examples

The following example shows how to view the default and supported country codes of embedded wireless controller AP:

Device#show wireless ewc-ap redundancy peers

show wireless mesh ethernet daisy-chain summary

To verify the ethernet daisy chain summary, use the show wireless mesh ethernet daisy-chain summary command.

show wireless mesh ethernet daisy-chain summary

Syntax Description


This command has no keywords or arguments.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Bengaluru 17.4.1	This command was introduced.

Examples

The following example shows how to verify the ethernet daisy chain summary:

Device# show wireless mesh ethernet daisy-chain summary

AP Name BVI MAC         BGN   Backhaul   Ethernet      STP Red
----------------------------------------------------------------------------------------------------------
RAP4    683b.78bf.15f0  IOT  Ethernet0   Up Up Dn Dn   Enabled
RAP3    683b.78bf.1634  IOT  Ethernet0   Up Up Dn Dn   Enabled
RAP1    6c8b.d383.b4d4  IOT  Ethernet0   Up Up Dn Dn   Enabled
RAP2    6c8b.d383.b4e8  IOT  Ethernet0   Up Up Up Dn   Enabled

show wireless mesh ethernet daisy-chain bgn

To verify the ethernet daisy chain Bridge Group Name (BGN) details, use the show wireless mesh ethernet daisy-chain bgn command.

show wireless mesh ethernet daisy-chain bgn bridge-group-name

Syntax Description


`bridge-group-name`	Enter the bridge group name.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Bengaluru 17.4.1	This command was introduced.

Examples

The following example shows how to verify the ethernet daisy chain Bridge Group Name (BGN) details:

Device# show wireless mesh ethernet daisy-chain bgn <IOT>

AP Name   BVI MAC       BGN  Backhaul    Ethernet      STP Red
----------------------------------------------------------------------------------------------------------
RAP4    683b.78bf.15f0  IOT  Ethernet0   Up Up Dn Dn   Enabled
RAP3    683b.78bf.1634  IOT  Ethernet0   Up Up Dn Dn   Enabled
RAP1    6c8b.d383.b4d4  IOT  Ethernet0   Up Up Dn Dn   Enabled
RAP2    6c8b.d383.b4e8  IOT  Ethernet0   Up Up Up Dn   Enabled

show wireless pmk-cache

To display information about the pairwise master key (PMK) cache, use the show wireless pmk-cache command in privileged EXEC mode.

show wireless pmk-cache [mac-address mac-addr]

Syntax Description


mac-address `mac-addr`	(Optional) Information about a single entry in the PMK cache.

Command Default

No default behavior or values.

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.1	This command was introduced.

Examples

The following is sample output from the show wireless pmk-cache mac-address command:

Device# show wireless pmk-cache mac-address H.H.H 
Number of PMK caches in total : 0

show wireless profile flex

To see the flex parameters of an wireless profile, use the show wireless profile flex command.

show wireless profile flex { detailed flex-profile-name chassis {chassis-number | active | standby }R0 } | summary chassis {chassis-number | active | standby}R0}

Syntax Description


detailed	Shows the flex-profile detailed parameters
summary	Show the flex-profile summary.
`chassis-number`	Chassis number. Valid range is 1–2.
active	Active instance.
standby	Standby instance.
R0	Route-Processor slot 0.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced in a release earlier than Cisco IOS XE Gibraltar 16.10.1.

Examples

The following example shows how to see the flex parameter's summary of the wireless profile:

Device# show wireless profile flex summary

show wireless profile policy detailed

To display the wireless policy profile details, use the show wireless profile policy detailed command.

show wireless profile policy detailed policy-profile-name

Syntax Description


This command has no keywords or arguments.

Command Default

None

Command Modes

Privilege EXEC (#)

Command History


Release	Modification
Cisco IOS XE Amsterdam 17.2.1	This command was introduced.

Examples

This example displays the wireless policy profile details:

Device#show wireless profile policy detailed policy-profile-name

show wireless rfid

To display RFID tag information, use the show wireless rfid command in privileged EXEC mode.

show wireless rfid { client | detail rfid-mac-address | stats | summary}

Syntax Description


client	Displays the summary of RFID tags that are clients.
detail	Displays information about a particular RFID tag.
stats	Displays RFID statistics.
summary	Displays summary information for all known RFID tags.
`rfid-mac-address`	RFID MAC address.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced.

Examples

This example shows how to view RFID information:

Device# show wireless rfid summary 

Total RFID entries: : 16
Total Unique RFID entries : 16
RFID ID VENDOR Closet AP RSSI Time Since Last Heard
0012.b80a.c791 Cisco 7069.5a63.0520 -31 1 minute 40 seconds ago
0012.b80a.c953 Cisco 7069.5a63.0460 -33 2 minutes 15 seconds ago
0012.b80b.806c Cisco 7069.5a63.0260 -45 22 seconds ago
0012.b80d.e9f9 Cisco 7069.5a63.0460 -38 2 minutes 37 seconds ago
0012.b80d.ea03 Cisco 7069.5a63.0520 -43 2 minutes 38 seconds ago
0012.b80d.ea6b Cisco 7069.5a63.0460 -39 2 minutes 35 seconds ago
0012.b80d.ebe8 Cisco 7069.5a63.0520 -43 1 minute 31 seconds ago
0012.b80d.ebeb Cisco 7069.5a63.0520 -43 2 minutes 37 seconds ago
0012.b80d.ec48 Cisco 7069.5a63.0460 -42 2 minutes 16 seconds ago
0012.b80d.ec55 Cisco 7069.5a63.0520 -41 1 second ago

show wireless summary

To display the number of access points, radios and wireless clients known to the controller, use the show wireless summary command in privileged EXEC mode.

show wireless summary

Syntax Description

This command has no arguments or keywords.

Command Default

No default behavior or values.

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.1	This command was introduced.

Examples

The following is sample output from the show wireless summary command:

Device# show wireless summary

Access Point Summary

               Total    Up    Down
-----------------------------------
802.11a/n          2     2       0
802.11b/g/n        2     2       0
All APs            2     2       0

Client Summary

Current Clients : 1
Excluded Clients: 0
Disabled Clients: 0

show wireless tag rf

To displaye the details of wireless RF tag, use the show wireless tag rf command.

show wireless tag rf{ summary | detailedrf-tag-name

Syntax Description


summary	Disaplys the summary of all RF tags.
detailed	Disaplys details of an RF tag.
`rf-tag-name`	RF tag name.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced.

Examples

The following example shows the sample output of show wireless tag rf summary command:

Device# show  wireless tag rf summary
 
Number of RF Tags: 1
 
RF tag name                       Description                            
------------------------------------------------------------------------
default-rf-tag                    default RF tag

show wireless urlfilter details

To view the details of a specified wireless URL filter, use the show wireless urlfilter details command.

show wireless urlfilter details list-name

Syntax Description


This command has no arguments.

Command Default

None

Command Modes

Global configuration

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced.

Examples

This example shows how to view the details of a specified wireless URL filter:

Device# show wireless urlfilter details urllist_flex_preauth
List Name................. : urllist_flex_preauth
Filter ID............... : : 1
Filter Type............... : PRE-AUTH
Action.................... : PERMIT
Redirect server ipv4...... : 8.8.8.8
Redirect server ipv6...... : 2001:0300:0008:0000:0000:0000:0000:0081
Configured List of URLs
   URL.................... : url1.dns.com

show wireless urlfilter summary

To view the summary of all wireless URL filters, use the show wireless urlfilter summary command.

show wireless urlfilter summary

Syntax Description


This command has no arguments.

Command Default

None

Command Modes

Global configuration

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced.

Examples

This example shows how to view the summary of all wireless URL filters:

Device# show wireless urlfilter summary
Black-list    - DENY
White-list    - PERMIT
Filter-Type   - Specific to Local Mode

URL-List                         ID  Filter-Type  Action   Redirect-ipv4  Redirect-ipv6
-------------------------------------------------------------------------------------------------------------
urllist_flex_preauth             1    PRE-AUTH     PERMIT    8.8.8.8       2001:0300:0008:0000:0000:0000:0000:0081

show wireless vlan details

To see the VLAN details, use the show wireless vlan details command.

show wireless vlan details [ chassis {chassis-number | active | standby} R0]

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced in a release earlier than Cisco IOS XE Gibraltar 16.10.1.

Examples

The following example shows how to see the VLAN details:

Device# show wireless vlan details chassis active r0

show wireless wgb mac-address

To view all the clients of the wireless workgroup bridge (WGB) using its MAC address, use the show wireless wgb mac-address command.

show wireless wgb mac-address mac-address detail

Syntax Description


`mac-address`	MAC address of the WGB.
detail	View clients of the wireless WGB.

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced in a release earlier than Cisco IOS XE Gibraltar 16.10.1.

Examples

The following example shows how to see the clients of the wireless WGB:

Device# show wireless wgb mac-address 98-C7-7B-09-EF-ED detail

show wireless wgb summary

To see the active workgroup bridges (WGB), use the show wireless wgb summary command.

show wireless wgb summary

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.10.1	This command was introduced in a release earlier than Cisco IOS XE Gibraltar 16.10.1.

Examples

The following example shows how to see the active workgroup bridges (WGB):

Device# show wireless wgb summary

show wireless wps rogue ap summary

To display a list of all rogue access points detected by the device, use the show wireless wps rogue ap summary command.

show wireless wps rogue ap summary

Command Default

None.

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.1	This command was introduced.

Usage Guidelines

None.

Examples

This example shows how to display a list of all rogue access points detected by the device:


Device# show wireless wps rogue ap summary 
Rogue Location Discovery Protocol            : Disabled
Rogue on wire Auto-Contain                   : Disabled
Rogue using our SSID Auto-Contain            : Disabled
Valid client on rogue AP Auto-Contain        : Disabled
Rogue AP timeout                             : 1200
Rogue Detection Report Interval              : 10
Rogue AP minimum RSSI                        : -128
Rogue AP minimum transient time              : 0

Number of rogue APs detected : 624

MAC Address         Classification     # APs    # Clients   Last Heard
--------------------------------------------------------------------------------------
0018.e78d.250a      Unclassified       1        0           Thu Jul 25 05:04:01 2013
0019.0705.d5bc      Unclassified       1        0           Thu Jul 25 05:16:26 2013
0019.0705.d5bd      Unclassified       1        0           Thu Jul 25 05:10:28 2013
0019.0705.d5bf      Unclassified       1        0           Thu Jul 25 05:16:26 2013

show wireless wps rogue client detailed

To view the detailed information of a specific rogue client, use the show wireless wps rogue client detailed client-mac command.

show wireless wps rogue client detailed client-mac

Syntax Description


`client-mac`	MAC address of the rogue client.

Command Default

None.

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.1	This command was introduced.

Usage Guidelines

None.

Examples

This example shows how to display the detailed information for a specific rogue client:


Device# show wireless wps rogue client detail  0024.d7f1.2558 
Rogue BSSID                       : 64d8.146f.379f
Rogue Radio Type                  : 802.11n - 5GHz
State                             : Alert
First Time Rogue was Reported     : Wed Aug  7 12:51:43 2013
Last Time Rogue was Reported      : Wed Aug  7 12:51:43 2013
Reported by
  AP 2
    MAC Address                   : 3cce.7309.0370
    Name                          : AP3502-talwar-ccie
    Radio Type                    : 802.11a
    RSSI                          : -42 dBm
    SNR                           : 47 dB
    Channel                       : 52
    Last reported by this AP      : Wed Aug  7 12:51:43 2013

show wireless wps rogue client summary

To display summary of WPS rogue clients, use the show wireless wps rogue client summary command.

show wireless wps rogue client summary

Command Default

None

Command Modes

Privileged EXEC

Command History


Release	Modification
Cisco IOS XE Gibraltar 16.12.1	This command was introduced.

Usage Guidelines

Examples

The following displays the output of the show wireless wps rogue client summary command:

Device# show wireless wps rogue client summary
Validate rogue clients against AAA  : Disabled
Validate rogue clients against MSE  : Enabled
Number of rogue clients detected : 0

Bias-Free Language

Results

Chapter: Show Commands

Show Commands

show aaa dead-criteria radius

Syntax Description

Command Default

Command Modes

Command History

Usage Guidelines

Examples

show access-list

Syntax Description

Command Default

Command Modes

Command History

Usage Guidelines

Examples

show ap auth-list

Syntax Description

Command Default

Command Modes

Command History

Examples

show ap auth-list ap-cert-policy

Syntax Description

Command Default

Command History

Examples

show ap auto-rf

Syntax Description

Command Default

Command History

Usage Guidelines

Examples

show ap config

Syntax Description

Command Default

Command Modes

Command History

Examples

show ap config slots

Syntax Description

Command Default

Command Modes

Command History

Examples

show ap crash-file

Syntax Description

Command Default

Command Modes

Command History

Examples

show ap dot11

Syntax Description

Command Default

Command Modes

Command History

Examples

show ap dot11

Syntax Description

Command Default

Command Modes

Usage Guidelines

Examples

show ap dot11 24ghz

Syntax Description

Command Default

Command Modes

Command History

Usage Guidelines

Examples

show ap dot11 24ghz SI config

Syntax Description

Command Default

Command Modes

Command History

Examples

show ap dot11 24ghz SI device type