PDF(362.3 KB) View with Adobe Reader on a variety of devices
ePub(259.8 KB) View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
Mobi (Kindle)(275.9 KB) View on Kindle device or Kindle app on multiple devices
Updated:June 2, 2016
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
EU Directive 1999/5/EC - Compliance Information for the Cisco Aironet 1810 series IEEE802.11 a/b/g/n/ac Wireless LAN products
June 2, 2016
This document contains compliance information for the Cisco Aironet 1810 Series Access Points which are intended to be placed on the market within the European Union, Lichtenstein, Switzerland, Iceland, Norway, Turkey and other countries that have implemented the EU Directive 1999/5/EC.
The information in this document is applicable to the Cisco Aironet 1810 series wireless LAN products that currently include the following products:
The equipment operates in the 2400 MHz to 2483.5 MHz, the 5150 MHz to 5350 MHz, and the 5470 MHz to 5725 MHz frequency range.
Declaration of Conformity with Regard to the EU Directive 1999/5/EC (R&TTE Directive)
This declaration is only valid for configurations (combinations of software, firmware and hardware) provided and/or supported by Cisco Systems for use within the EU. The use of software or firmware not supported/provided by Cisco Systems may result that the equipment is no longer compliant with the regulatory requirements.
The full declaration of conformity for the Cisco Aironet 1810 Series can be found at the following URL:
The following standards were applied during the assessment of the product against the requirements of Directive 1999/5/EC:
Radio: EN 301 893 and EN 300 328
EMC: EN 301 489-1 and EN 301 489-17
Safety: EN 60950-1 and EN 50385
For the Cisco Aironet 1810 Series Access Points, the following CE mark and Class-2 identifier are affixed to the equipment and its packaging.
The following sections identify countries having additional requirements or restrictions.
In Denmark, the band 5150 - 5350 MHz is also allowed for outdoor usage.
I Danmark må frekvensbåndet 5150 - 5350 også anvendes udendørs.
This product meets the National Radio Interface and the requirements specified in the National Frequency Allocation Table for Italy. Unless this wireless LAN product is operating within the boundaries of the owner's property, its use requires a “general authorization.” Please check http://www.sviluppoeconomico.gov.it/ for more details.
Questo prodotto è conforme alla specifiche di Interfaccia Radio Nazionali e rispetta il Piano Nazionale di ripartizione delle frequenze in Italia. Se non viene installato all 'interno del proprio fondo, l'utilizzo di prodotti Wireless LAN richiede una “Autorizzazione Generale”. Consultare http://www.sviluppoeconomico.gov.it/ per maggiori dettagli.
The outdoor usage of the 2.4 GHz band requires an authorization from the Electronic Communications Office. Please check http://www.esd.lv for more details.
2.4 GHz frekvenèu joslas izmantoðanai ârpus telpâm nepiecieðama atïauja no Elektronisko sakaru direkcijas. Vairâk informâcijas: http://www.esd.lv.
Note Although Norway, Switzerland and Liechtenstein are not EU member states, the EU Directive 1999/5/EC has also been implemented in those countries.
The device has integrated antennas which cannot be replaced.
Maximum Power level (EIRP)
2400 MHz - 2483.5 MHz
5150 MHz - 5350 MHz
5470 MHz - 5725 MHz
The operating frequency in a Wireless LAN is determined by the access point. As such, it is important that the access point is correctly configured to meet the local regulations.
Wireless LAN equipment operating in the 5 GHz frequency band and installed outdoors need to have the 5 150 MHz to 5 350 MHz band disabled. Check the User Manual for correctly configuring the equipment so that outdoor operation only takes place in 5 470 MHz to 5 725 MHz.
Intended use of the equipment
This product is wireless Access Point to be used in large enterprise organizations for the deployment of a wireless network whereby Wi-Fi compliant devices can connect to the network. The product is intended to be used indoors.
Changing Output Power
To change the output power of the Cisco wireless products, follow the instructions at:
The following documents provide information about the controllers and access points:
Cisco WLAN Controller Web Interface User Guide—Describes the web-based user interface that is built into each Cisco Wireless LAN Controller.
Cisco Wireless LAN Controller Installation and Configuration Guide—Describes installation, configuration, and logging into Cisco Wireless LAN Controllers.
Cisco Aironet Access Point Hardware Installation Guide and/or Getting Started Guide—Provides a product overview and basic instructions for getting an access point connected to a wireless LAN. It also describes the access point's hardware installation and specifications.
Note If you still have questions regarding the compliance of these products or you cannot find the information you are looking for, please send an email request to Cisco at firstname.lastname@example.org
Obtaining Documentation and Submitting a Service Request
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)