bearer 3gpp apn
This command allows you to define rule expressions to match Access Point Name (APN) of the bearer flow.
Security Administrator, Administrator
Exec > ACS Configuration > Ruledef Configuration
active-charging service service_name > ruledef ruledef_name
Entering the above command sequence results in the following prompt:
[ no ] bearer 3gpp apn [ case-sensitive ] operator apn_name
If previously configured, deletes the specified rule expression from the current ruledef.
Specifies that the rule expression be case-sensitive. By default, rule expressions are not case-sensitive.
Specifies how to match.
operator must be one of the following:
!= : Does not equal
!contains : Does not contain
!ends-with : Does not end with
!starts-with : Does not start with
= : Equals
contains : Contains
ends-with : Ends with
starts-with : Starts with
Specifies name of the APN to match.
apn_name must be an alphanumeric string of 1 through 62 characters and may contain punctuation characters.
Use this command to define rule expressions to match an APN in the bearer flow.
bearer 3gpp = apn12