Deployment and Installation Guide for Cisco Jabber Softphone for VDI—HP Thin Pro and Ubuntu Release 12.1

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents
Find Matches in This Book
Available Languages
Download Options

Book Title

Deployment and Installation Guide for Cisco Jabber Softphone for VDI—HP Thin Pro and Ubuntu Release 12.1

Chapter Title

Installation and Deployment

Results

Updated:
July 18, 2018

Chapter: Installation and Deployment

Installation and Deployment

Deployment and Installation Workflow—HP Thin Pro


Important

The Cisco Jabber for Windows version must match your Cisco Jabber Softphone for VDI version. The Cisco JVDI Agent and Cisco JVDI Client versions must be the same.

You must install both Cisco JVDI Agent and Cisco JVDI Client; otherwise, the softphone fails to register.

We recommend that you read the Release Notes for Cisco Jabber Softphone for VDI—HP Thin Pro and Ubuntu for your release. Review requirements to confirm that all required hardware and software meet them. Failure to meet all requirements can result in a nonfunctional deployment.

Procedure

Step 1

Follow the instructions to deploy Cisco Jabber for Windows, up to the installation of the Jabber client.

See On-Premises Deployment for Cisco Jabber for your release.

For hybrid deployments, see Cloud and Hybrid Deployments for Cisco Jabber for your release.

Jabber deployment guides are available from: https://www.cisco.com/c/en/us/support/unified-communications/jabber-windows/products-installation-guides-list.html.

Step 2

Create and set up the hosted virtual desktops in the data center.

Ensure that the hosted virtual desktops (HVD) are ready for you to install Cisco JVDI Agent.

Step 3

Set up and configure the thin clients.

Documentation for HP Thin Pro-based thin clients and for HP Thin Pro is available from the HP website. Ensure that the thin clients are ready for you to install the Cisco JVDI Client.
Step 4

Configure the network. See Port Requirements.

Step 5

Install the Cisco Jabber Softphone for VDI components on the thin clients and the hosted virtual desktop. See Install the Components Workflow—HP Thin Pro.

After you install Cisco JVDI Agent and other required software on the HVD, you can clone the HVD.

Deployment and Installation Workflow—Ubuntu


Important

The Cisco Jabber for Windows version must match your Cisco Jabber Softphone for VDI version. The Cisco JVDI Agent and Cisco JVDI Client versions must be the same.

You must install both Cisco JVDI Agent and Cisco JVDI Client; otherwise, the softphone fails to register.

We recommend that you read the Release Notes for Cisco Jabber Softphone for VDI—HP Thin Pro and Ubuntu for your release. Review the requirements to confirm that all required hardware and software meet them. Failure to meet all requirements can result in a nonfunctional deployment.

Procedure

Step 1

Follow the instructions to deploy Cisco Jabber for Windows, up to the installation of the Jabber client.

See On-Premises Deployment for Cisco Jabber for your release.

For hybrid deployments, see Cloud and Hybrid Deployments for Cisco Jabber for your release.

Jabber deployment guides are available from: https://www.cisco.com/c/en/us/support/unified-communications/jabber-windows/products-installation-guides-list.html.

Step 2

Create and set up the hosted virtual desktops in the data center.

Ensure that a hosted virtual desktop (HVD) is ready for you to install Cisco Jabber Softphone for VDI.

Step 3

Set up and configure the thin clients.

Have the hardware ready to install Cisco Jabber Softphone for VDI components.

Documentation for Ubuntu thin clients is available from the individual hardware vendors. Documentation for Ubuntu is available from the Ubuntu website.

Step 4

Configure the network. See Port Requirements.

Step 5

Install the Cisco Jabber Softphone for VDI components on the thin clients and the hosted virtual desktop. See Install the Components Workflow—Ubuntu.

After you install Cisco JVDI Agent and other required software on the HVD, you can clone the HVD.

Set up the Hosted Virtual Desktops Workflow

Procedure

Step 1

Log in to the Microsoft Windows HVD as the new user, with administration rights.
Step 2

Join the HVD to the corporate domain.

You must have domain administration rights.
Step 3

Set up Citrix or VMware access to the HVDs.

Important 
Configure VMware to use PCoIP.
Step 4

Install Cisco JVDI Agent on the HVD.

Step 5

Install Cisco Jabber on the HVD.

See the installation guide for your release: http://www.cisco.com/c/en/us/support/unified-communications/jabber-windows/products-installation-guides-list.html
Step 6

Clone the HVD image.

For best practices for cloning Microsoft Windows HVD images, consult the documentation for your Citrix or VMware product.

Install the Components Workflow—HP Thin Pro


Important

The Cisco Jabber for Windows version must match your Cisco Jabber Softphone for VDI version. The Cisco JVDI Agent and Cisco JVDI Client versions must be the same.

Procedure

Step 1

Obtain the Cisco Jabber Softphone for VDI Debian (.deb) package and cisco-jvdi<xx.x.x>-pre-reqs.xar file from HP.

The <xx.x.x> variable in the filename is the Cisco Jabber Softphone for VDI release number. For assistance locating files on the HP site, contact HP support.

Have the Cisco Jabber Softphone for VDI files on hand and ready to install. If you plan to manually install Cisco JVDI Client on the thin clients, copy the files to a USB stick.

Step 2

Download the Cisco JVDI Agent.

Have the Cisco JVDI Agent installation file on hand and ready to install on the hosted virtual desktop.

Step 3

Have all users log out of the hosted virtual desktops.
Step 4

On the thin client, install the Cisco Jabber Softphone for VDI files in the following order, either manually from a USB stick, or use HP Device Manager for mass deployments.

Order of installation:

  1. Install cisco-jvdi12.0.x-pre-reqs-thinpro6.2.0-hp1d.xar.

  2. Install the Cisco Jabber Softphone for VDI .deb package.

For more information about mass deployment, see the documentation for HP Device Manager 4.7, available from HP.
Step 5

On the HVD, uninstall any previously installed Cisco JVDI Agent.

Step 6

On the HVD, uninstall any previously installed Cisco Unified Communications clients, such as Cisco Jabber.

Step 7

On the HVD, install Cisco JVDI Agent.

Double-click the .msi file, and then follow the installation wizard steps.
Step 8

On the HVD, install Cisco Jabber for Windows.

Double-click CiscoJabberSetup.msi and follow the installation wizard steps. For detailed information about how to install Jabber for Windows, see On-Premises Deployment for Cisco Jabber for your release.

For hybrid deployments, see Cloud and Hybrid Deployments for Cisco Jabber for your release.

Jabber deployment guides are available from: https://www.cisco.com/c/en/us/support/unified-communications/jabber-windows/products-installation-guides-list.html.

Install the Components Workflow—Ubuntu


Important

The Cisco Jabber for Windows version must match your Cisco Jabber Softphone for VDI version. The Cisco JVDI Agent and Cisco JVDI Client versions must be the same.

Procedure

Step 1

Obtain the Cisco Jabber Softphone for VDI deb package from the Ubuntu software center repository.

Have the Cisco Jabber Softphone for VDI deb package on hand and ready to install. You can place the file on a network share accessible from the thin clients, or copy it to a USB stick.

Step 2

Download the Cisco JVDI Agent.

Have the Cisco JVDI Agent installation file on hand and ready to install on the hosted virtual desktop.

Step 3

Have all users log out of the hosted virtual desktops.
Step 4

On the thin client, use the terminal emulator to run the following command: sudo apt-get update, and then enter your password at the prompt.

Updates the list of repositories for the Ubuntu Software Center.

After the command finishes reading the package lists, you can close the terminal emulator.
Step 5

On the thin client, install the Cisco JVDI Client; enter your password at the authentication prompt.

When you double-click the Cisco Jabber Softphone for VDI deb package, the Ubuntu Software Center opens. After you click Install, the Ubuntu Software Center locates and installs the dependency libraries, and then installs the Cisco JVDI Client.

Step 6

On the HVD, uninstall any previously installed Cisco JVDI Agent.

Step 7

On the HVD, uninstall any previously installed Cisco Unified Communications clients, such as Cisco Jabber.

Step 8

On the HVD, install Cisco JVDI Agent.

Double-click the Cisco JVDI Agent .msi and follow the installation wizard steps.

Step 9

On the HVD, install Cisco Jabber.

Double-click CiscoJabberSetup.msi and follow the installation wizard steps. For detailed information about how to install Jabber for Windows, see On-Premises Deployment for Cisco Jabber for your release.

For hybrid deployments, see Cloud and Hybrid Deployments for Cisco Jabber for your release.

Jabber deployment guides are available from: https://www.cisco.com/c/en/us/support/unified-communications/jabber-windows/products-installation-guides-list.html.

Download the Cisco JVDI Client

Procedure

Step 1

Visit the following URL:

http://www.cisco.com/cisco/software/navigator.html
Step 2

Go to Products > Unified Communications > Unified Communications Applications > Messaging > Cisco Jabber Softphone for VDI for HP Thin Pro and Ubuntu.

Step 3

From the list, choose the file for your release.
Step 4

Click Download or Add to cart and follow the prompts.

Download the Cisco JVDI Agent

Install Cisco JVDI Agent on the hosted virtual desktops (HVD), before you install Cisco Jabber for Windows.

Procedure

Step 1

Visit the following URL:

http://www.cisco.com/cisco/software/navigator.html
Step 2

Go to Products > Unified Communications > Unified Communications Applications > Messaging > Cisco Jabber Softphone for VDI for HP Thin Pro and Ubuntu.

Step 3

From the list, choose the file for your release.
Step 4

Click Download or Add to cart and follow the prompts.

Download Cisco AnyConnect

The supported vpnsystem package is available from Unicon.

Procedure

Step 1

Visit the Unicon web site: http://www.myelux.com.

Step 2

Locate and download the package.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco