The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This book provides the information you need to understand, install, configure, and manage Cisco DX Series devices on a network.
Network engineers, system administrators, and telecom engineers should review this guide to learn the steps that are required to set up Cisco DX Series devices. The tasks described in this document involve configuring network settings that are not intended for users. The tasks in this manual require familiarity with Cisco Unified Communications Manager.
Because of the complexity of an IP telephony network, this guide does not provide complete and detailed information for procedures that you need to perform in Cisco Unified Communications Manager or on other network devices.
This document uses the following conventions:
Convention |
Description |
---|---|
boldface font |
Commands and keywords are in boldface. |
italic font |
Arguments for which you supply values are in italics. |
[ ] |
Elements in square brackets are optional. |
{ x | y | z } |
Alternative keywords are grouped in braces and separated by vertical bars. |
[ x | y | z ] |
Optional alternative keywords are grouped in brackets and separated by vertical bars. |
string |
A nonquoted set of characters. Do not use quotation marks around the string or the string will include the quotation marks. |
screen font |
Terminal sessions and information the system displays are in screen font. |
input font |
Information you must enter is in input font. |
italic screen font |
Arguments for which you supply values are in italic screen font. |
^ |
The symbol ^ represents the key labeled Control - for example, the key combination ^D in a screen display means hold down the Control key while you press the D key. |
< > |
Nonprinting characters such as passwords are in angle brackets. |
Note | Means reader take note. Notes contain helpful suggestions or references to material not covered in the publication. |
Caution | Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data. |
Warnings use the following convention:
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071
SAVE THESE INSTRUCTIONS
All Cisco DX Series documentation is available at the following URL:
User-oriented documents are available at the following URL:
Administrator-oriented documentation is available at the following URL:
The Cisco DX Series Wireless LAN Deployment Guide is available at the following URL:
Translated publications are available at the following URL:
Open Source license information is available as the following URL:
Regulatory Compliance and Safety Information is available at the following URL:
See the Cisco Unified Communications Manager Documentation Guide and other publications that are specific to your Cisco Unified Communications Manager release. Navigate from the following documentation URL:
Refer to the Cisco Business Edition 6000 Documentation Guide and other publications that are specific to your Cisco Business Edition 6000 release. Navigate from the following URL:
The following table highlights some of the differences in terminology found in the Cisco DX Series user guides, the Cisco DX Series Administration Guide, and the Cisco Unified Communications Manager Administration Guide.
User Guides |
Administration Guides |
---|---|
Line Status |
Busy Lamp Field (BLF) |
Message Indicators |
Message Waiting Indicator (MWI) or Message Waiting Lamp |
Voicemail System |
Voice Messaging System |
For information on obtaining documentation, obtaining support, providing documentation feedback, reviewing security guidelines, and also recommended aliases and general Cisco documents, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS Version 2.0.
This product contains cryptographic features and is subject to U.S. and local country laws that govern import, export, transfer, and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute, or use encryption. Importers, exporters, distributors, and users are responsible for compliance with U.S. and local country laws. By using this product, you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately.
Further information regarding U.S. export regulations can be found at http://www.bis.doc.gov/policiesandregulations/ear/index.htm.