Errors

The total number of HTTP errors (for example, 401 Unauthorized) that the connector encountered.

MBytesReceived

The amount of data that the connector received.

MBytesSent

The amount of data that the connector sent.

Requests

The total number of request that the connector handled.

ThreadsTotal

The current total number of request processing threads, including available and in-use threads, for the connector.

ThreadsMax

The maximum number of request processing threads for the connector.

Each incoming request on a web application window requires a thread for the duration of that request. If more simultaneous requests are received than the currently available request processing threads can handle, additional threads are created up to the configured maximum shown in this counter. If still more simultaneous requests are received, they accumulate within the server socket that the connector created, up to an internally specified maximum number. Any further simultaneous requests receive connection refused messages until resources are available to process them.

ThreadsBusy

This counter represents the current number of busy/in-use request processing threads for the connector.

KBytesMemoryFree

The amount of free dynamic memory block (heap memory) in the Tomcat Java Virtual Machine.

When the amount of free dynamic memory is low, more memory is automatically allocated, and total memory size (represented by the KbytesMemoryTotal counter) increases but only up to the maximum (represented by the KbytesMemoryMax counter).

You can determine the amount of memory in use by subtracting KBytesMemoryFree from KbytesMemoryTotal.

KBytesMemoryMax

The amount of free dynamic memory block (heap memory) in the Tomcat Java Virtual Machine.

KBytesMemoryTotal

The current total dynamic memory block size, including free and in-use memory, of Tomcat Java Virtual Machine.

Errors

The total number of HTTP errors (for example, 401 Unauthorized) that a Unified Communications Manager-related or Cisco Unity Connection-related web application encounters.

Requests

The total number of requests that the web application handles. Each time that a web application is accessed, its Requests counter increments accordingly.

SessionsActive

The number of active or in use sessions in the web application.

% Mem Used

Displays the system physical memory utilization as a percentage. The value of this counter is calculated as follows:

Total KBytes - Free KBytes - Buffers KBytes - Cached KBytes + Shared KBytes) / Total KBytes

This value also corresponds to the Used KBytes/Total KBytes

% Page Usage

The percentage of active pages.

% VM Used

Displays the system virtual memory utilization as a percentage. The value of this counter is calculated as follows:

Total KBytes - Free KBytes - Buffers KBytes - Cached KBytes + Shared KBytes + Used Swap KBytes) / (Total KBytes + Total Swap KBytes)

This value also corresponds to Used VM KBytes/Total VM KBytes.

Buffers KBytes

The capacity of buffers in your system in kilobytes.

Cached KBytes

The amount of cached memory in kilobytes.

Free KBytes

The total amount of memory that is available in your system in kilobytes.

Free Swap KBytes

The amount of free swap space that is available in your system in kilobytes.

HighFree

The amount of free memory in the high region.

The Linux kernel splits the virtual memory address space into memory regions. The high memory is memory above a certain physical address, and its amount depends on the total memory and the type of kernel on the system.

For the Unified Communications Manager system with 4 GB memory, the high memory is roughly in the address of 896M to 4096M.

HighTotal

The total amount of memory in the high region.

The Linux kernel splits the virtual memory address space into memory regions. The high memory is memory above a certain physical address, and its amount depends on the total memory and the type of kernel on the system.

For the Unified Communications Manager system with 4 GB memory, the high memory is roughly in the address of 896M to 4096M.

Page Faults Per Sec

The number of page faults (both major and minor) that the system makes per second (post 2.5 kernels only). This reading does not necessarily represent a count of page faults that generate input and output (I/O) because some page faults can get resolved without I/O.

Low Total

The total low (non-paged) memory for kernel.

Low Free

The total free low (non-paged) memory for kernel.

Page Major Faults Per Sec

The number of major faults that the system makes per second that require a memory page from the disk (post 2.5 kernels only).

Pages

The number of pages that the system pages in from the disk, plus the number of pages that the system pages out to the disk.

Pages Input

The number of pages that the system pages in from the disk.

Pages Input Per Sec

The total number of kilobytes that the system pages in from the disk per second.

Pages Output

The number of pages that the system pages out to the disk.

Pages Output Per Sec

The total number of kilobytes that the system pages out to the disk per second.

Shared KBytes

The amount of shared memory in your system in kilobytes.

SlabCache

The memory used by created slabcaches by various kernel components, as a macroscopic counter representing the sum of all the individual entries in the proc's slabinfo.

SwapCached

The amount of Swap used as cache memory. Memory that once was swapped out, is swapped back in, but is still in the swapfile.

Total KBytes

The total amount of memory in your system in kilobytes.

Total Swap KBytes

The total amount of swap space in your system in kilobytes.

Total VM KBytes

The total amount of system physical and memory and swap space (Total Kbytes + Total Swap Kbytes) that is in use in your system in kilobytes.

Used KBytes

The amount of in-use physical memory. The value of the Used KBytes counter is calculated as follows:

Total KBytes - Free KBytes - Buffers KBytes - Cached KBytes + Shared KBytes.

The Used KBytes value differs from the Linux term that displays in the top or free command output. The Used value that displays in the top or free command output equals the difference in Total KBytes - Free KBytes and also includes the sum of Buffers KBytes and Cached KBytes.

Used Swap KBytes

This counter represents the amount of swap space that is in use on your system in kilobytes.

Used VM KBytes

This counter represents the system physical memory and the amount of swap space that is in use on your system in kilobytes. The value is calculated as follows:

Total KBytes - Free KBytes - Buffers KBytes - Cached KBytes + Shared KBytes + Used Swap KBytes

This value corresponds to Used Mem KBytes + Used Swap KBytes.

Rx Bytes

The number of bytes, including framing characters that are received on this interface.

Rx Dropped

The number of inbound packets that are chosen to be discarded even though no errors have been detected. This action prevents the packet from being delivered to a higher-layer protocol. Discarding packets also frees up buffer space.

Rx Errors

The number of inbound packets (packet-oriented interfaces) and the number of inbound transmission units (character-oriented or fixed-length interfaces) that contain errors that prevented them from being delivered to a higher-layer protocol.

Rx Multicast

The number of multicast packets that are received on this interface.

Rx Packets

The number of packets that this sublayer delivered to a higher sublayer. This situation does not include the packets that are addressed to a multicast or broadcast address at this sublayer.

Total Bytes

The total number of received (Rx) bytes and transmitted (Tx) bytes.

Total Packets

The total number of Rx packets and Tx packets.

Tx Bytes

The total number of octets, including framing characters, that are transmitted out from the interface.

Tx Dropped

The number of outbound packets that are chosen to be discarded even though no errors are detected. This action prevents the packet from being delivered to a higher layer protocol. Discarding a packet also frees up buffer space.

Tx Errors

The number of outbound packets (packet-oriented interfaces) and the number of outbound transmission units (character-oriented or fixed-length interfaces) that are transmitted because of errors.

Tx Packets

The total number of packets that the higher-level protocols requested for transmission, including those that are discarded or not sent. This situation doesn't include packets that are addressed to a multicast or broadcast address at this sublayer.

Tx QueueLen

The length of the output packet queue (in packets).

Allocated FDs

The number of allocated file descriptors.

Being Used FDs

The number of file descriptors that are currently in use in the system.

Freed FDs

The number of allocated file descriptors on the system that are freed.

IOPerSecond

The number of input and output (I/O) operations on all disk partitions per second on this server. If you experience a system performance issue, use the information in this counter to measure the impact of the aggregate I/O operations on this server.

IOReadReqMergedPerSecond

The number of read requests merged per second that are queued to all devices on this server.

IOWriteReqMergedPerSecond

The number of write requests merged per second that are queued to all devices on this server.

IOReadReqPerSecond

The number of read requests per second that are issued to all devices on this server.

IOWriteReqPerSecond

The number of write requests per second that are issued to all devices on this server.

IOSectorsReadPerSecond

The number of sectors read per second from all devices on this server.

IOSectorsWrittenPerSecond

The number of sectors written per second to all devices on this server.

IOKBytesReadPerSecond

The number of KBytes read per second from all devices on this server.

IOKBytesWrittenPerSecond

The number of KBytes written per second to all devices on this server.

IOSectorsReqSizeAvg

The average size in sectors of the requests that are issued to all devices on this server.

IOReqQueueSizeAvg

The average queue length of the requests that are issued to all devices on this server.

IOAwait

The average time in milliseconds for I/O requests that are issued to all devices to be served. This reading includes the time spent by the requests in queue and the time spent servicing the requests.

IOServiceTime

The average service time in milliseconds for I/O requests that are issued to all devices on this server.

IOCpuUtil

The percentage of CPU time during which I/O requests are issued to the device (bandwidth utilization for the device) on this server.

Max FDs

The maximum number of file descriptors that are allowed on the system.

Total CPU Time

The total time in jiffies that the system has been up and running.

Total Processes

The number of processes on the system.

Total Threads

The number of threads on the system.

Active Opens

This counter displays the number of times that the TCP connections make a direct transition to the SYN-SENT state from the CLOSED state.

Attempt Fails

This counter displays the number of times that the TCP connections make a direct transition to the CLOSED state from either the SYN-RCVD state or the SYN-RCVD state. The counter also displays the number of times TCP connections make a direct transition to the LISTEN state from the SYS-RCVD state.

Curr Estab

This counter displays the number of TCP connections with a current state of ESTABLISHED or CLOSE- WAIT.

Estab Resets

This counter displays the number of times that the TCP connections make a direct transition to the CLOSED state from the ESTABLISHED state or the CLOSE-WAIT state.

In Segs

This counter displays the total number of segments that are received, including those that are received in error. This count only includes segments that are received on currently established connections.

InOut Segs

This counter displays the total number of segments that are sent and the total number of segments that are received.

Out Segs

This counter displays the total number of segments that are sent. This count only includes segments that are sent on currently established connections, but excludes retransmitted octets.

Passive Opens

This counter displays the number of times that TCP connections make a direct transition to the SYN-RCVD state from the LISTEN state.

RetransSegs

This counter displays the total number of segments that are retransmitted because the segment contains one or more previously transmitted octets.

ThrottleCount

This counter represents the number of times Administrative XML Layer (AXL) throttling has been engaged since the last restart of the Cisco AXL Web Service. Throttling occurs when the AXL service receives more change requests than it is able to process.

ThrottleState

This counter represents whether Administrative XML Layer (AXL) throttling is currently active (throttling is engaged). A value of 1 in this counter indicates that throttling is currently engaged, which means that any application attempting to send a write request to Unified Communications Manager through AXL will be denied due to AXL throttling. Read requests will continue to be allowed and processed while AXL throttling is engaged. A value of zero indicates that throttling is not occurring at this time and all read and write requests will be processed.

FilesTotal

This counter represents the total number of files in the ram-based file system (ramfs).

SpaceFree

This counter represents the amount of free data blocks in the ram-based file system (ramfs). A block is a uniformly sized unit of data storage for a filesystem. The block size specifies the size that the file system uses to read and write data. On the Unified Communications Manager system, the block size is 4096 bytes.

SpaceUsed

This counter represents the amount of used data blocks in the ram-based filesystem (ramfs). A block is a uniformly sized unit of data storage for a file system. The block size specifies the size that the file system will use to read and write data. On the Unified Communications Manager system, the block size is 4096 bytes.

OutboundBusyAttempts

This counter represents the total number of times that Unified Communications Manager attempts a call through the analog access gateway when all ports were busy.

PortsActive

This counter represents the number of ports that are currently in use (active). A port appears active when a call is in progress on that port.

PortsOutOfService

This counter represents the number of ports that are currently out of service. Counter applies only to loop-start and ground-start trunks.

OutOfResources

This counter represents the total number of times that Unified Communications Manager attempted to allocate an annunciator resource from an annunciator device and failed; for example, because all resources were already in use.

ResourceActive

This counter represents the total number of annunciator resources that are currently active (in use) for an annunciator device.

ResourceAvailable

This counter represents the total number of resources that are not active and are still available to be used at the current time for the annunciator device.

ResourceTotal

This counter represents the total number of annunciator resources that are configured for an annunciator device.

AdHocConferenceFailures

This counter represents the number of attempts that failed to add a participant to an Ad Hoc Conference because the call path between the geolocation of the devices already in conference and the device being invited to the conference was restricted due to a logical partition policy.

BasicCallFailures

This counter represents the number of basic calls that have failed because of logical partition policy restrictions between the geolocations of the called and calling parties. A basic call is any call that does not utilize supplementary services such as transfer, forward, and so on.

ForwardingFailures

This counter represents the number of attempts to forward an incoming call which failed because of a logical partition policy restriction between the geolocations of the two parties involved.

LogicalPartitionFailuresTotal

This counter represents the total number of call attempts that have failed because of a restriction of calls between geolocations of the calling and called parties. This includes the number of failures for Transfer, AdHoc Conference, Meet-Me Conference, PickUp, Call Park, Shared Lines and Basic Calls.

MeetMeConferenceFailures

This counter represents the number of attempts that failed to add a participant to a Meet-Me conference because the call path between the geolocation of the devices already in conference and the device attempting to join the conference was restricted due to a logical partition policy.

MidCallFailures

This counter represents the number of calls that have failed because of a restriction between the geolocations of the called or connected parties after the initial policy check.

ParkRetrievalFailures

This counter represents the number of attempts to perform a Call Park operation that failed because the device that was attempting to retrieve the call had a logical partition policy restriction with the geolocation of the parked party.

PickUpFailures

This counter represents the number of attempts to perform a PickUp operation that failed because the device on which the pickup was being attempted had a logical partition policy restriction with the geolocation of the calling device.

SharedLineFailures

This counter represents the number of attempts to use a shared line which failed because the caller or callee has a logical partition policy restriction with the geolocation of the devices having the shared lines.

TransferFailures

This counter represents the number of call transfer attempts that failed due to restriction of calls between the geolocation of the transferred party and the transferred destination.

AnnunciatorOutOfResources

This counter represents the total number of times that Unified Communications Manager attempted to allocate an annunciator resource from those that are registered to a Unified Communications Manager when none were available.

AnnunciatorResourceActive

This counter represents the total number of annunciator resources that are currently in use on all annunciator devices that are registered with a Unified Communications Manager.

AnnunciatorResourceAvailable

This counter represents the total number of annunciator resources that are not active and are currently available.

AnnunciatorResourceTotal

This counter represents the total number of annunciator resources that are provided by all annunciator devices that are currently registered with Unified Communications Manager.

AuthenticatedCallsActive

This counter represents the number of authenticated calls that are currently active (in use) on Unified Communications Manager. An authenticated call designates one in which all the endpoints that are participating in the call are authenticated. An authenticated phone uses the Transport Layer Security (TLS) authenticated Skinny protocol signaling with Unified Communications Manager.

AuthenticatedCallsCompleted

This counter represents the number of authenticated calls that connected and subsequently disconnected through Unified Communications Manager. An authenticated call designates one in which all the endpoints that are participating in the call are authenticated. An authenticated phone uses the TLS authenticated Skinny protocol signaling with Unified Communications Manager.

AuthenticatedPartiallyRegisteredPhone

This counter represents the number of partially registered, authenticated SIP phones.

AuthenticatedRegisteredPhones

This counter represents the total number of authenticated phones that are registered to Unified Communications Manager. An authenticated phone uses the TLS authenticated Skinny protocol signaling with Unified Communications Manager.

BRIChannelsActive

This counter represents the number of BRI voice channels that are currently in an active call on this Unified Communications Manager.

BRISpansInService

This counter represents the number of BRI spans that are currently available for use.

CallManagerHeartBeat

This counter represents the heartbeat of Unified Communications Manager. This incremental count indicates that Unified Communications Manager is up and running. If the count does not increment, that indicates that Unified Communications Manager is down.

CallsActive

This counter represents the number of voice or video streaming connections that are currently in use (active); in other words, the number of calls that actually have a voice path that is connected on Unified Communications Manager.

CallsAttempted

This counter represents the total number of attempted calls. An attempted call occurs anytime that a phone goes off hook and back on hook, regardless of whether any digits were dialed, or whether it connected to a destination. The system considers some call attempts during feature operations (such as transfer and conference) to be attempted calls.

CallsCompleted

This counter represents the number of calls that were actually connected (a voice path or video stream was established) through Unified Communications Manager. This number increases when the call terminates.

CallsInProgress

This counter represents the number of voice or video calls that are currently in progress on Unified Communications Manager, including all active calls.

When a phone that is registered with Skinny Client Control Protocol (SCCP) goes off hook, the CallsInProgress progress counter increments. until it goes back on hook.

For Cisco Unified IP Phones 7902, 7905, 7912, 7940, and 7960 that register with SIP, the CallsInProgress counter increments when the dial softkey is pressed.

For all other phones that are running SIP, the CallsInProgress counter increments when the first digit is pressed.

When all voice or video calls that are in progress are connected, the number of CallsInProgress represents the number of CallsActive. The counter decreases by one when a phone goes back on hook.

CM_MediaTermPointsRequestsThrottled

This counter represents the total number of media termination point (MTP) resource requests that have been denied due to throttling (a resource from this MTP was not allocated because, as specified by the Cisco CallManager service parameter, MTP and Transcoder Resource Throttling Percentage, the MTP was being utilized beyond the configured throttle percentage). This counter increments each time a request for an MTP on this Unified Communications Manager node is requested and denied due to MTP throttling and reflects a running total since the start of the Cisco CallManager Service.

CM_TranscoderRequestsThrottled

This counter represents the total number of transcoder resource requests that have been denied due to throttling (a resource from this transcoder was not allocated because, as specified by the Cisco CallManager service parameter MTP and Transcoder Resource Throttling Percentage, the transcoder was being utilized beyond the configured throttle percentage). This counter increments each time a request for a transcoder on this Unified Communications Manager node is requested and denied due to transcoder throttling and reflects a running total since the start of the Cisco CallManager Service.

EncryptedCallsActive

This counter represents the number of encrypted calls that are currently active (in use) on this Unified Communications Manager. An encrypted call represents one in which all the endpoints that are participating in the call are encrypted.

EncryptedCallsCompleted

This counter represents the number of encrypted calls that were connected and subsequently disconnected through this Unified Communications Manager. An encrypted call represents one in which all the endpoints that are participating in the call are encrypted.

EncryptedPartiallyRegisteredPhones

This counter represents the number of partially registered, encrypted SIP phones.

EncryptedRegisteredPhones

This counter represents the total number of encrypted phones that are registered on this Unified Communications Manager.

FXOPortsActive

This counter represents the number of FXO ports that are currently in use (active) on a Unified Communications Manager.

FXOPortsInService

This counter represents the number of FXO ports that are currently available for use in the system.

FXSPortsActive

This counter represents the number of FXS ports that are currently in use (active) on a Unified Communications Manager.

FXSPortsInService

This counter represents the number of FXS ports that are currently available for use in the system.

HuntListsInService

This counter represents the number of hunt lists that are currently in service on Unified Communications Manager.

HWConferenceActive

This counter represents the total number of hardware conference resources that are provided by all hardware conference bridge devices that are currently registered with Unified Communications Manager.

HWConferenceCompleted

This counter represents the total number of conferences that used a hardware conference bridge (hardware-based conference devices such as Cisco Catalyst 6000, Cisco Catalyst 4000, Cisco VG200, Cisco series 26xx and 36xx) that is allocated from Unified Communications Manager and that have completed, which means that the conference bridge has been allocated and released. A conference activates when the first call connects to the bridge. The conference completes when the last call disconnects from the bridge.

HWConferenceOutOfResources

This counter represents the total number of times that Unified Communications Manager attempted to allocate a hardware conference resource from those that are registered to a Unified Communications Manager when none was available.

HWConferenceResourceActive

This counter represents the total number of conference resources that are in use on all hardware conference devices (such as Cisco Catalyst 6000, Catalyst 4000, Cisco VG200, Cisco series 26xx and 36xx) that are registered with Unified Communications Manager. System considers conference to be active when one or more calls are connected to a bridge.

HWConferenceResourceAvailable

This counter represents the number of hardware conference resources that are not in use and that are available to be allocated on all hardware conference devices (such as Cisco Catalyst 6000, Cisco Catalyst 4000, Cisco VG200, Cisco series 26xx and 36xx) that are allocated from Unified Communications Manager and that have been completed, which means that the conference bridge has been allocated and released. A conference activates when the first call connects to the bridge. The conference completes when the last call disconnects from the bridge.

HWConferenceResourceTotal

This counter represents the number of active conferences on all hardware conference devices that are registered with Unified Communications Manager.

InitializationState

This counter represents the current initialization state of Unified Communications Manager. Unified Communications Manager includes the following initialization state values:

1-Database, 2-Regions, 3-Locations, 4-QoS Policy, 5-Time Of Day, 6-AAR Neighborhoods, 7-Digit Analysis, 8-Route Plan, 9-Call Control, 10-RSVP Session Manager, 11-Supplementary Services, 12-Directory, 13-SDL Link, 14-Device, 100-Initialization Complete.

Not all states display when this counter is used. This display does not indicate that an error occurred; this display simply indicates that the states initialized and completed within the refresh period of the performance monitor.

LocationOutOfResources

This counter represents the total number of times that a call through Locations failed due to the lack of bandwidth.

MCUConferencesActive

This counter represents the total number of active conferences on all Cisco TelePresence MCU conference bridge devices that are registered with Unified Communications Manager.

MCUConferencesCompleted

This counter represents the total number of conferences that used a Cisco TelePresence MCU conference bridge allocated from Unified Communications Manager and completed, implying that the conference bridge was allocated and released. A conference is activated when the first call is connected to the bridge. The conference is completed when the last call is disconnected from the bridge.

MCUHttpConnectionErrors

This counter represents the total number of times Unified Communications Manager attempted to create HTTP connections to Cisco TelePresence MCU conference bridge device, and failed due to connection errors on the Cisco TelePresence MCU conference bridge side.

MCUHttpNon200OKResponse

This counter represents the total number of times Unified Communications Manager received a non 200 OK HTTP Response from Cisco TelePresence MCU conference bridge, for any HTTP query sent.

MCUOutOfResources

This counter represents the total number of times Unified Communications Manager attempted to allocate a conference resource from Cisco TelePresence MCU conference bridge device and failed. For example, the attempt to allocate a conference resource fails, if all the resources are already in use.

MOHMulticastResourceActive

This counter represents the total number of multicast Music On Hold (MOH) resources that are currently in use (active) on all MOH servers that are registered with a Unified Communications Manager.

MOHMulticastResourceAvailable

This counter represents the total number of active multicast MOH connections that are not being used on all MOH servers that are registered with a Unified Communications Manager.

MOHOutOfResources

This counter represents the total number of times that the Media Resource Manager attempted to allocate an MOH resource when all available resources on all MOH servers that are registered with a Unified Communications Manager were already active.

MOHTotalMulticastResources

This counter represents the total number of multicast MOH resources or connections that are provided by all MOH servers that are currently registered with a Unified Communications Manager.

MOHTotalUnicastResources

This counter represents the total number of unicast MOH resources or streams that are provided by all MOH servers that are currently registered with Unified Communications Manager. Each MOH unicast resource uses one stream.

MOHUnicastResourceActive

This counter represents the total number of unicast MOH resources that are currently in use (active) on all MOH servers that are registered with Unified Communications Manager. Each MOH unicast resource uses one stream.

MOHUnicastResourceAvailable

This counter represents the total number of unicast MOH resources that are currently available on all MOH servers that are registered with Unified Communications Manager. Each MOH unicast resource uses one stream.

MTPOutOfResources

This counter represents the total number of times that Unified Communications Manager attempted but failed to allocate a media termination point (MTP) resource from one MTP device that is registered with Unified Communications Manager. This also means that no transcoders were available to act as MTPs.

MTPResourceActive

This counter represents the total number of MTP resources that are currently in use (active) on all MTP devices that are registered with a Unified Communications Manager. Each MTP resource uses two streams. An MTP in use represents one MTP resource that has been allocated for use in a call.

MTPResourceAvailable

This counter represents the total number of MTP resources that are not in use and are available to be allocated on all MTP devices that are registered with Unified Communications Manager. Each MTP resource uses two streams. An MTP in use represents one MTP resource that has been allocated for use in a call.

MTPResourceTotal

This counter represents the total number of MTP resources that are provided by all MTP devices that are currently registered with Unified Communications Manager.

MTP_RequestsThrottled

This counter represents the total number of MTP resource requests that have been denied due to throttling (a resource from this MTP was not allocated because, as specified by the Cisco CallManager service parameter MTP and Transcoder Resource Throttling Percentage, the MTP was being utilized beyond the configured throttle percentage). This counter increments each time a resource is requested from this MTP and is denied due to throttling. This counter reflects a running total since the MTP device registered with the Cisco CallManager Service.

PartiallyRegisteredPhone

This counter represents the number of partially registered phones that are running SIP.

PRIChannelsActive

This counter represents the number of PRI voice channels that are in an active call on a Unified Communications Manager.

PRISpansInService

This counter represents the number of PRI spans that are currently available for use.

RegisteredAnalogAccess

This counter represents the number of registered Cisco analog access gateways that are registered with system. The count does not include the number of Cisco analog access ports.

RegisteredMGCPGateway

This counter represents the number of MGCP gateways that are currently registered in the system.

RegisteredOtherStationDevices

This counter represents the number of station devices other than Cisco hardware IP phones that are currently registered in the system (for example, Cisco IP SoftPhone, CTI port, CTI route point, Cisco voicemail port).

SIPLineServerAuthorizationChallenges

This counter represents the number of authentication challenges for incoming SIP requests that the Unified Communications Manager server issued to phones that are running SIP. An authentication challenge occurs when a phone that is running SIP with Digest Authentication enabled sends a SIP line request to Unified Communications Manager.

SIPLineServerAuthorizationFailures

This counter represents the number of authentication challenge failures for incoming SIP requests from SIP phones to the Unified Communications Manager server. An authentication failure occurs when a SIP phone with Digest Authentication enabled sends a SIP line request with bad credentials to Unified Communications Manager.

SIPTrunkAuthorization

This counter represents the number of application-level authorization checks for incoming SIP requests that Unified Communications Manager has issued to SIP trunks. An application-level authorization check occurs when Unified Communications Manager compares an incoming SIP request to the application-level settings on the SIP Trunk Security Profile Configuration window in Cisco Unified Communications Manager Administration.

SIPTrunkAuthorizationFailures

This counter represents the number of application-level authorization failures for incoming SIP requests that have occurred on Unified Communications Manager SIP trunks. An application-level authorization failure occurs when Unified Communications Manager compares an incoming SIP request to the application-level authorization settings on the SIP Trunk Security Profile Configuration window in Cisco Unified Communications Manager Administration and finds that authorization for one or more of the SIP features on that window is not allowed.

SIPTrunkServerAuthenticationChallenges

This counter represents the number of authentication challenges for incoming SIP requests that Unified Communications Manager issued to SIP trunks. An authentication challenge occurs when a SIP trunk with Digest Authentication enabled sends a SIP request to Unified Communications Manager.

SIPTrunkServerAuthenticationFailures

This counter represents the number of authentication challenge failures that occurred for incoming SIP requests from SIP trunks to Unified Communications Manager. An authentication failure occurs when a SIP trunk with Digest Authentication enabled sends a SIP request with bad credentials to Unified Communications Manager.

SWConferenceActive

This counter represents the number of active conferences on all software conference devices that are registered with Unified Communications Manager.

SWConferenceCompleted

This counter represents the total number of conferences that used a software conference bridge that was allocated from a Unified Communications Manager and that have been completed, which means that the conference bridge has been allocated and released. A conference activates when the first call connects to the bridge. The conference completes when the last call disconnects from the bridge.

SWConferenceOutOfResources

This counter represents the total number of times that Unified Communications Manager attempted to allocate a software conference resource from those that are registered to Unified Communications Manager when none were available. Counter includes failed attempts to add a new participant to an existing conference.

SWConferenceResourceActive

This counter represents the total number of conference resources that are in use on all software conference devices that are registered with Unified Communications Manager. The system considers a conference to be active when one or more calls connect to a bridge. One resource equals one stream.

SWConferenceResourceAvailable

This counter represents the number of new software-based conferences that can be started at the same time, for Unified Communications Manager. You must have a minimum of three streams available for each new conference. One resource equals one stream.

SWConferenceResourceTotal

This counter represents the total number of software conference resources that are provided by all software conference bridge devices that are currently registered with Unified Communications Manager.

SystemCallsAttempted

This counter represents the total number of server-originated calls and attempted calls to the Unity message waiting indicator (MWI).

T1ChannelsActive

This counter represents the number of T1 CAS voice channels that are in an active call on a Unified Communications Manager.

T1SpansInService

This counter represents the number of T1 CAS spans that are currently available for use.

TLSConnectedSIPTrunks

This counter represents the number of SIP trunks that are configured and connected through Transport Layer Security (TLS).

TLSConnectedWSM

This counter represents the number of WSM Connectors that is configured and connected to Motorola WSM through Transport Layer Security (TLS).

TranscoderOutOfResources

This counter represents the total number of times that Unified Communications Manager attempted to allocate a transcoder resource from a transcoder device that is registered to a Unified Communications Manager when none was available.

TranscoderResourceActive

This counter represents the total number of transcoders that are in use on all transcoder devices that are registered with Unified Communications Manager. A transcoder in use represents one transcoder resource that has been allocated for use in a call. Each transcoder resource uses two streams.

TranscoderResourceAvailable

This counter represents the total number of transcoders that are not in use and that are available to be allocated on all transcoder devices that are registered with Unified Communications Manager. Each transcoder resource uses two streams.

TranscoderResourceTotal

This counter represents the total number of transcoder resources that are provided by all transcoder devices that are currently registered with Unified Communications Manager.

VCBConferenceActive

This counter represents the total number of active video conferences on all video conference bridge devices that are registered with Unified Communications Manager.

VCBConferenceAvailable

This counter represents the total number of new video conferences on all video conference bridge devices that are registered with Unified Communications Manager.

VCBConferenceCompleted

This counter represents the total number of video conferences that used a video conference bridge that is allocated from Unified Communications Manager and that have been completed, which means that the conference bridge has been allocated and released. A conference activates when the first call connects to the bridge. The conference completes when the last call disconnects from the bridge.

VCBConferenceTotal

This counter represents the total number of video conferences that are supported on all video conference bridge devices that are registered with Unified Communications Manager.

VCBOutOfConferences

This counter represents the total number of times that Unified Communications Manager attempted to allocate a video conference resource from those that are registered to Unified Communications Manager when none was available.

VCBOutOfResources

This counter represents the total number of failed new video conference requests. A conference request can fail because, for example, the configured number of conferences is already in use.

VCBResourceActive

This counter represents the total number of video conference resources that are currently in use on all video conference devices that are registered with Unified Communications Manager.

VCBResourceAvailable

This counter represents the total number of video conference resources that are not active and are currently available.

VCBResourceTotal

This counter represents the total number of video conference resources that are provided by all video conference bridge devices that are currently registered with Unified Communications Manager.

VideoCallsActive

This counter represents the number of active video calls with active video streaming connections on all video conference bridge devices that are registered with Unified Communications Manager.

VideoCallsCompleted

This counter represents the number of video calls that were actually connected with video streams and then released.

VideoOutOfResources

This counter represents the total number of times that Unified Communications Manager attempted to allocate a video-streaming resource from one of the video conference bridge devices that is registered to Unified Communications Manager when none was available.

XCODE_RequestsThrottled

This counter represents the total number of transcoder resource requests that have been denied due to throttling (a resource from this transcoder was not allocated because, as specified by the Cisco CallManager service parameter MTP and Transcoder Resource Throttling Percentage, the transcoder was being utilized beyond the configured throttle percentage). This counter increments each time a resource is requested from this transcoder and is denied due to throttling. This counter reflects a running total since the transcoder device registered with the Cisco CallManager Service.

AverageExpectedDelay

This counter represents the current average expected delay before any incoming message gets handled.

CallsRejectedDueToICTThrottling

This counter represents the total number of calls that were rejected since the start of CiscoCallManager service due to Intercluster Trunk (ICT) call throttling. When the threshold limit of 140 calls per 5 seconds is met, the ICT will start throttling (rejecting) new calls. One cause for ICT call throttling occurs when calls across an ICT enter a route loop condition.

CallThrottlingGenericCounter3

This counter represents a generic counter that is used for call-throttling purpose.

CodeRedEntryExit

This counter indicates whether Unified Communications Manager has entered or exited a Code state (call-throttling mode). Valid values include 0 (Exit) and 1 (Entry).

CodeYellowEntryExit

This counter indicates whether Unified Communications Manager has entered or exited a Code Yellow state (call-throttling mode). Valid values include 0 (Exit) and 1 (Entry).

EngineeringCounter1

Do not use this counter unless directed by a Cisco Engineering Special build. Cisco uses information in this counter for diagnostic purposes.

EngineeringCounter2

Do not use this counter unless directed by a Cisco Engineering Special build. Cisco uses information in this counter for diagnostic purposes.

EngineeringCounter3

Do not use this counter unless directed by a Cisco Engineering Special build. Cisco uses information in this counter for diagnostic purposes.

EngineeringCounter4

Do not use this counter unless directed by a Cisco Engineering Special build. Cisco uses information in this counter for diagnostic purposes.

EngineeringCounter5

Do not use this counter unless directed by a Cisco Engineering Special build. Cisco uses information in this counter for diagnostic purposes.

EngineeringCounter6

Do not use this counter unless directed by a Cisco Engineering Special build. Cisco uses information in this counter for diagnostic purposes.

EngineeringCounter7

Do not use this counter unless directed by a Cisco Engineering Special build. Cisco uses information in this counter for diagnostic purposes.

EngineeringCounter8

Do not use this counter unless directed by a Cisco Engineering Special build. Cisco uses information in this counter for diagnostic purposes.

QueueSignalsPresent 1-High

This counter indicates the number of high-priority signals in the Unified Communications Manager queue. High-priority signals include timeout events, internal Unified Communications Manager keepalives, certain gatekeeper events, and internal process creation, among other events. A large number of high-priority events will cause degraded performance on Unified Communications Manager and result in slow call connection or loss of dial tone. Use this counter in conjunction with the QueueSignalsProcessed 1-High counter to determine the processing delay on Unified Communications Manager.

QueueSignalsPresent 2-Normal

This counter indicates the number of normal-priority signals in the Unified Communications Manager queue. Normal-priority signals include call-processing functions, key presses, on-hook and off-hook notifications, among other events. A large number of normal-priority events will cause degraded performance on Unified Communications Manager, sometimes resulting in delayed dial tone, slow call connection, or loss of dial tone. Use this counter in conjunction with the QueueSignalsProcessed 2-Normal counter to determine the call-processing delay on Unified Communications Manager. Remember that high-priority signals must complete before normal-priority signals begin to process, so check the high-priority counters as well to get an accurate picture of the potential delay.

QueueSignalsPresent 3-Low

This counter indicates the number of low-priority signals in the Unified Communications Manager queue. Low-priority signals include station device registration (except the initial station registration request message), among other events. A large number of signals in this queue could result in delayed device registration, among other events.

QueueSignalsPresent 4-Lowest

This counter indicates the number of lowest priority signals in the Unified Communications Manager queue. Lowest priority signals include the initial station registration request message during device registration, among other events. A large number of signals in this queue could result in delayed device registration, among other events.

QueueSignalsProcessed 1-High

This counter indicates the number of high-priority signals that Unified Communications Manager processes for each 1-second interval. Use this counter in conjunction with the QueueSignalsPresent 1-High counter to determine the processing delay on this queue.

QueueSignalsProcessed 2-Normal

This counter indicates the number of normal-priority signals that Unified Communications Manager processes for each 1-second interval. Use this counter in conjunction with the QueueSignalsPresent 2-Normal counter to determine the processing delay on this queue. Remember that high-priority signals get processed before normal-priority signals.

QueueSignalsProcessed 3-Low

This counter indicates the number of low-priority signals that Unified Communications Manager processes for each 1-second interval. Use this counter in conjunction with the QueueSignalsPresent 3-Low counter to determine the processing delay on this queue. The number of signals processed gives an indication of how much device registration activity is being processed in this time interval.

QueueSignalsProcessed 4-Lowest

This counter indicates the number of lowest priority signals that Unified Communications Manager processes for each 1-second interval. Use this counter in conjunction with the QueueSignalsPresent 4-Lowest counter to determine the processing delay on this queue. The number of signals that are processed gives an indication of how many devices began the Unified Communications Manager registration process in this time interval.

QueueSignalsProcessed Total

This counter provides a sum total of all queue signals that Unified Communications Manager processes for each 1-second period for all queue levels: high, normal, low, and lowest.

SkinnyDevicesThrottled

This counter represents the total number of Skinny devices that are being throttled. A Skinny device gets throttled (asked to shut down and reregister) when the total number of events that the Skinny device generated exceeds the configured maximum threshold value (default value specifies 2000 events) within a 5-second interval.

ThrottlingSampleActivity

This counter indicates how many samples, out of the configured sample size, have non-zero averageExpectedDelay values. This counter resets when any sample has an averageExpectedDelay value of zero. This process repeats for each batch of samples. A batch represents the configured sample size.

TotalCodeYellowEntry

This counter indicates the number of times that Unified Communications Manager call processing enters the code yellow state. This counter remains cumulative from the start of the Unified Communications Manager process.

CcmLinkActive

This counter represents the total number of active Unified Communications Manager links. CTI Manager maintains links to all active servers in a cluster, if applicable.

CTIConnectionActive

This counter represents the total number of CTI clients that are currently connected to the CTIManager. This counter increases by one when new connection is established and decreases by one when a connection is released. The CTIManager service parameter MaxCTIConnections determines the maximum number of active connections.

DevicesOpen

This counter represents the total number of devices that are configured in Unified Communications Manager that CTI applications control and/or monitor. Devices include hardware IP phones, CTI ports, CTI route points, and so on.

LinesOpen

This counter represents the total number of lines that are configured in Unified Communications Manager that control and/or monitor CTI applications.

QbeVersion

This counter represents the version number of the Quick Buffer Encoding (QBE) interface that the CTIManager uses.

CallsAnchored

This counter represents the number of calls that are placed or received on dual-mode phones that are anchored in Unified Communications Manager. The counter increments when a call is received from or placed to a dual-mode phone. The counter increments twice if a dual-mode phone calls another dual-mode phone.

DMMSRegistered

This counter represents the number of Dual-mode Mobile Station (DMMS) subscribers that are registered in the wireless LAN (WLAN).

FollowMeAborted

This counter represents the number of failed follow-me operations.

FollowMeAttempted

This counter represents the number of follow-me operations that Unified Communications Manager attempted. The counter increments when a SIP 302 - Moved Temporarily message is received from the Wireless Service Manager (WSM) and Unified Communications Manager redirects the call to the DMMS in WLAN.

FollowMeCompleted

This counter represents the number of follow-me operations that were successfully completed. The counter increments when the DMMS in WLAN answers the call and the media (voice path) is successfully established with the calling device.

FollowMeInProgress

This counter represents the number of follow-me operations that are currently in progress. The counter increments when a follow-me is attempted, and it decrements when the follow-me operation is aborted or completed.

H1HandOutAttempted

This counter represents the number of H1 hand-out operations that dual-mode phones attempt. The counter increments when Unified Communications Manager processes a call to the H1 number from a DMMS.

H1HandOutCompleted

This counter represents the number of successfully completed H1 hand-out operations The counter increments when the DMMS in WLAN successfully reestablishes a media (voice path).

H2HandOutCompleted

This counter represents the number of successfully completed H2 hand-out operations. The counter increments when the DMMS in WLAN successfully reestablishes a media (voice path).

H2HandOutsAttempted

This counter represents the number of H2 hand-out operations that dual-mode phones attempt. The counter increments when Unified Communications Manager receives a call to the H2 number from a DMMS.

HandInAborted

This counter represents the number of hand-in operations that failed.

HandInAttempted

This counter represents the number of hand-in operations that dual-mode phones attempt.

HandInCompleted

This counter represents the number of successfully completed hand-in operations. The counter increments when the DMMS in WLAN successfully reestablishes a media (voice path).

HandInInProgress

This counter represents the number of hand-in operations that are currently in progress. The counter increments when a hand-in is attempted, and the counter decrements when the hand-in is aborted or completed.

HandOutAborted

This counter represents the number of hand-out operations that failed.

HandOutInProgress

This counter represents the number of H1 and H2 hand-out operations that are currently in progress. The counter increments when a H1 or H2 hand-out is attempted, and it decrements when the hand-out is aborted or completed.

RequestsHandled

This counter represents the total number of HTTP requests that the extension mobility application handled since the last restart of the CiscoCallManager service. A typical login would constitute two HTTP requests: one to query the initial login state of the device and another to log in the user on a device. Similarly, a typical logout also results in two HTTP requests.

RequestsInProgress

This counter represents the number of HTTP requests that the extension mobility application currently is handling. A typical login would constitute two HTTP requests: one to query the initial login state of the device and another to log in the user on a device. Similarly, a typical logout also results in two HTTP requests.

RequestsThrottled

This counter represents the total number of Login/Logout Requests that failed due to throttling.

LoginsSuccessful

This counter represents the total number of successful login requests that were completed through EM Service.

LogoutsSuccessful

This counter represents the total number of successful logout requests that were completed through EM Service

Total Login/LogoutRequestsAttempted

This counter represents the total number of Login and Logout requests that were attempted through this EM Service. This number includes both successful and unsuccessful attempts.

ACFsReceived

This counter represents the total number of RAS Admission Confirm messages that are received from the configured gatekeeper and its alternate gatekeepers.

ARQsAttempted

This counter represents the total number of RAS Admission Request messages that are attempted by using the configured gatekeeper and its alternate gatekeepers.

RasRetries

This counter represents the number of retries due to loss or delay of all RAS acknowledgement messages on the configured gatekeeper and its alternate gatekeepers.

VideoOutOfResources

This counter represents the total number of video-stream requests to the configured gatekeeper or its alternate gatekeepers that failed, most likely due to lack of bandwidth.

CallsActive

This counter represents the number of streaming connections that are currently active (in use) on the configured H.323 device; in other words, the number of calls that actually have a voice path that is connected.

CallsAttempted

This counter represents the total number of calls that have been attempted on a device, including both successful and unsuccessful call attempts.

CallsCompleted

This counter represents the total number of successful calls that were made from a device.

CallsInProgress

This counter represents the number of calls that are currently in progress on a device.

CallsRejectedDueToICTCallThrottling

This counter represents the total number of calls rejected due to Intercluster Trunk (ICT) call throttling since the start of the CiscoCallManager service. When the system reaches a threshold limit of 140 calls per 5 seconds, ICT will start throttling (rejecting) new calls. One cause for ICT call throttling occurs when calls across an ICT enter a route loop condition.

VideoCallsActive

This counter represents the number of video calls with video streaming connections that are currently active (in use) on all H.323 trunks that are registered with a Unified Communications Manager; in other words, the number of calls that actually have video-streaming connections on a Unified Communications Manager.

VideoCallsCompleted

This counter represents the number of video calls that were actually connected with video streams for all H.323 trunks that were registered with a Unified Communications Manager. This number increases when the call terminates.

CallsAbandoned

This counter represents the number of abandoned calls that occurred through a hunt list. An abandoned call represents one in which a caller hangs up before the call is answered.

CallsActive

This counter represents the number of calls that are currently active (in use) that occurred through a hunt list. An active call represents one that gets distributed and answered, and to which a voice path connects.

CallsBusyAttempts

This counter represents the number of times that calls through a hunt list were attempted when all members of the line and/or route groups were busy.

CallsInProgress

This counter represents the number of calls that are currently in progress through a hunt list. A call in progress represents one that the call distributor is attempting to extend to a member of a line or route group and that has not yet been answered. Examples of a hunt list member include a line, a station device, a trunk device, or a port/channel of a trunk device.

CallsRingNoAnswer

This counter represents the total number of calls through a hunt list that rang but that called parties did not answer.

HuntListInService

This counter specifies whether the particular hunt list is currently in service. A value of 0 indicates that the hunt list is out of service; a value of 1 indicates that the hunt list is in service. Reasons that a hunt list could be out of service include the hunt list is not running on a primary Unified Communications Manager based on its Unified Communications Manager Group or the hunt list has been disabled in Cisco Unified Communications Manager Administration.

MembersAvailable

This counter represents the total number of available or idle members of line and route groups that belong to an in-service hunt list. An available member currently handles a call and will accept a new call. An idle member does not handle any call and will accept a new call. A hunt list member can comprise a route group, line group, or a combination. A member of a line group represents a directory number of a line on an IP phone or a voice-mail port. A member of a route group represents a station gateway, a trunk gateway, or port/channel of a trunk gateway.

HWConferenceActive

This counter represents the number of conferences that are currently active (in use) on a HW conference bridge device. One resource represents one stream.

HWConferenceCompleted

This counter represents the total number of conferences that have been allocated and released on a HW conference device. A conference starts when the first call connects to the bridge. The conference completes when the last call disconnects from the bridge.

OutOfResources

This counter represents the total number of times that an attempt was made to allocate a conference resource from a HW conference device and failed, for example, because all resources were already in use.

ResourceActive

This counter represents the number of resources that are currently in use (active) for this HW conference device. One resource represents one stream.

ResourceAvailable

This counter represents the total number of resources that are not active and are still available to be used now for a HW conference device. One resource represents one stream.

ResourceTotal

This counter represents the total number of resources for a HW conference bridge device. This counter equals the sum of the counters ResourceAvailable and ResourceActive. One resource represents one stream.

AssistantsActive

This counter represents the number of assistant consoles that are currently active. An active assistant console exists when an assistant is logged in from the assistant console desktop application.

LinesOpen

This counter represents the number of phone lines that the Cisco Unified Communications Manager Assistant application opened. An open phone line exists when the application assumes line control from CTI.

ManagersActive

This counter represents the current number of managers that the Cisco IPMA is servicing.

SessionsCurrent

This counter represents the total number of managers assistants that are currently using the Cisco Unified Communications Manager Assistant application. Each manager and each assistant constitute an active session; so, for one manager/assistant pair, this counter would reflect two sessions.

Is Hub[1] or Spoke[0]

This counter represents the state of Location Bandwidth Manager. Spoke state is represented by 0 and hub state with a value of 1.

LocalHubNodesConnected

This counter represents the number of local hub nodes connected.

LocalSpokesNodesConnected

This counter represents the number of local spoke nodes connected.

RemoteHubNodesConnectedInsecure

This counter represents the number of insecure remote hub nodes connected.

RemoteHubNodesConnectedSecure

This counter represents the number of secure remote hub nodes connected.

BandwidthAvailable

This counter represents the current audio bandwidth in a location or a link between two locations. A value of 0 indicates that no audio bandwidth is available.

BandwidthMaximum

This counter represents the maximum audio bandwidth that is available in a location or a link between two locations. A value of 0 indicates that no audio bandwidth is available.

BandwidthOversubscription

This represents the current oversubscribed audio bandwidth in a location or link between two locations. A value of zero indicates no bandwidth oversubscription.

CallsInProgress

This counter represents the number of calls that are currently in progress on a particular Cisco Location Bandwidth Manager.

ImmersiveOutOfResources

This represents the total number of failed immersive video call bandwidth reservations associated with a location or a link between two locations due to lack of immersive video bandwidth.

ImmersiveVideoBandwidthAvailable

This counter represents the maximum bandwidth that is available for video in a location or a link between two locations. A value of 0 indicates that no bandwidth is allocated for video.

ImmersiveVideoBandwidthMaximum

This counter represents the bandwidth that is currently available for video in a location or a link between two locations. A value of 0 indicates that no bandwidth is available.

ImmersiveVideoBandwidthOversubscription

This represents the current immersive video oversubscribed bandwidth in a location or link between two locations. A value of zero indicates no bandwidth oversubscription.

OutOfResources

This counter represents the total number of failed audio call bandwidth reservations associated with a given location or a link between two locations due to lack of audio bandwidth.

VideoBandwidthAvailable

This counter represents the bandwidth that is currently available for video in a location or a link between two locations. A value of 0 indicates that no bandwidth is available.

VideoBandwidthMaximum

This counter represents the maximum bandwidth that is available for video in a location and a link between two locations. A value of 0 indicates that no bandwidth is allocated for video.

VideoOversubscription

This represents the current video oversubscribed bandwidth amount in a location and a link between two locations. A value of zero indicates no bandwidth oversubscription.

VideoOutOfResources

This counter represents the total number of failed video call bandwidth reservations associated with a given location or a link between two locations due to lack of video bandwidth.

RSVP AudioReservationErrorCounts

This counter represents the number of RSVP reservation errors in the audio stream.

RSVP MandatoryConnectionsInProgress

This counter represents the number of connections with mandatory RSVP that are in progress.

RSVP OptionalConnectionsInProgress

This counter represents the number of connections with optional RSVP that are in progress.

RSVP TotalCallsFailed

This counter represents the number of total calls that failed due to a RSVP reservation failure.

RSVP VideoCallsFailed

This counter represents the number of video calls that failed due to a RSVP reservation failure.

RSVP VideoReservationErrorCounts

This counter represents the number of RSVP reservation errors in the video stream

ANNConnectionsLost

This counter represents the total number of times since the last restart of the Cisco IP Voice Media Streaming Application that a Unified Communications Manager connection was lost.

ANNConnectionState

For each Unified Communications Manager that is associated with an annunciator, this counter represents the current registration state to Unified Communications Manager; 0 indicates no registration to Unified Communications Manager; 1 indicates registration to the primary Unified Communications Manager; 2 indicates connection to the secondary Unified Communications Manager (connected to Unified Communications Manager but not registered until the primary Unified Communications Manager connection fails).

ANNConnectionsTotal

This counter represents the total number of annunciator instances that have been started since the Cisco IP Voice Media Streaming Application service started.

ANNInstancesActive

This counter represents the number of actively playing (currently in use) announcements.

ANNStreamsActive

This counter represents the total number of currently active simplex (one direction) streams for all connections. Each stream direction counts as one stream. One internal stream provides the audio input and another output stream to the endpoint device.

ANNStreamsAvailable

This counter represents the remaining number of streams that are allocated for the annunciator device that are available for use. This counter starts as 2 multiplied by the number of configured connections (defined in the Cisco IP Voice Media Streaming App service parameter for the Annunciator, Call Count) and is reduced by one for each active stream that started.

ANNStreamsTotal

This counter represents the total number of simplex (one direction) streams that connected to the annunciator device since the Cisco IP Voice Media Streaming Application service started.

CFBConferencesActive

This counter represents the number of active (currently in use) conferences.

CFBConferencesTotal

This counter represents the total number of conferences that started since the Cisco IP Voice Media Streaming Application service started.

CFBConnectionsLost

This counter represents the total number of times since the last restart of the Cisco IP Voice Media Streaming Application that a Unified Communications Manager connection was lost.

CFBConnectionState

For each Unified Communications Manager that is associated with a SW Conference Bridge, this counter represents the current registration state to Unified Communications Manager; 0 indicates no registration to Unified Communications Manager; 1 indicates registration to the primary Unified Communications Manager; 2 indicates connection to the secondary Unified Communications Manager (connected to Unified Communications Manager but not registered until the primary Unified Communications Manager connection fails).

CFBStreamsActive

This counter represents the total number of currently active simplex (one direction) streams for all conferences. Each stream direction counts as one stream. In a three-party conference, the number of active streams equals 6.

CFBStreamsAvailable

This counter represents the remaining number of streams that are allocated for the conference bridge that are available for use. This counter starts as 2 multiplied by the number of configured connections (defined in the Cisco IP Voice Media Streaming App service parameter for Conference Bridge, Call Count) and is reduced by one for each active stream started.

CFBStreamsTotal

This counter represents the total number of simplex (one direction) streams that connected to the conference bridge since the Cisco IP Voice Media Streaming Application service started.

MOHAudioSourcesActive

This counter represents the number of active (currently in use) audio sources for this MOH server. Some of these audio sources may not be actively streaming audio data if no devices are listening. The exception exists for multicast audio sources, which will always be streaming audio.

When an audio source is in use, even after the listener has disconnected, this counter will always have one input stream for each configured MOH codec. For unicast streams, the stream may exist in a suspended state where no audio data is received until a device connects to listen to the stream. Each MOH multicast resource uses one stream for each audio source and codec combination. For example, if the default audio source is configured for multicast, G.711 mu-law and wideband codecs, then two streams get used (default audio source + G.711 mu-law and default audio source + wideband).

MOHConnectionsLost

This counter represents the total number of times since the last restart of the Cisco IP Voice Media Streaming Application that a Unified Communications Manager connection was lost.

MOHConnectionState

For each Unified Communications Manager that is associated with an MOH, this counter represents the current registration state to Unified Communications Manager; 0 indicates no registration to Unified Communications Manager; 1 indicates registration to the primary Unified Communications Manager; 2 indicates connection to the secondary Unified Communications Manager (connected to Unified Communications Manager but not registered until the primary Unified Communications Manager connection fails).

MOHStreamsActive

This counter represents the total number of active (currently in use) simplex (one direction) streams for all connections. One output stream exists for each device that is listening to a unicast audio source, and one input stream exists for each active audio source, multiplied by the number of MOH codecs.

When an audio source has been used once, it will always have one input stream for each configured MOH codec. For unicast streams, the stream may exist in a suspended state where no audio data is received until a device connects to listen to the stream. Each MOH multicast resource uses one stream for each audio source and codec combination. For example, if the default audio source is configured for multicast, G.711 mu-law and wideband codecs, then two streams get used (default audio source + G.711 mu-law and default audio source + wideband).

MOHStreamsAvailable

This counter represents the remaining number of streams that are allocated for the MOH device that are available for use. This counter starts as 408 plus the number of configured half-duplex unicast connections and is reduced by 1 for each active stream that started. The counter gets reduced by 2 for each multicast audio source, multiplied by the number of MOH codecs that are configured. The counter gets reduced by 1 for each unicast audio source, multiplied by the number of MOH codecs configured.

MOHStreamsTotal

This counter represents the total number of simplex (one direction) streams that have connected to the MOH server since the Cisco IP Voice Media Streaming Application service started.

MTPConnectionsLost

This counter represents the total number of times since the last restart of the Cisco IP Voice Streaming Application that a Unified Communications Manager connection was lost.

MTPConnectionState

For each Unified Communications Manager that is associated with an MTP, this counter represents the current registration state to Unified Communications Manager; 0 indicates no registration to Unified Communications Manager; 1 indicates registration to the primary Unified Communications Manager; 2 indicates connection to the secondary Unified Communications Manager (connected to Unified Communications Manager but not registered until the primary Unified Communications Manager connection fails).

MTPConnectionsTotal

This counter represents the total number of MTP instances that have been started since the Cisco IP Voice Media Streaming Application service started.

MTPInstancesActive

This counter represents the number of active (currently in use) instances of MTP.

MTPStreamsActive

This counter represents the total number of currently active simplex (one direction) streams for all connections. Each stream direction counts as one stream.

MTPStreamsAvailable

This counter represents the remaining number of streams that are allocated for the MTP device that are available for use. This counter starts as 2 multiplied by the number of configured connections (defined in the Cisco IP Voice Media Streaming App service parameter for MTP, Call Count) and is reduced by one for each active stream started.

MTPStreamsTotal

This counter represents the total number of simplex (one direction) streams that connected to the MTP device since the Cisco IP Voice Media Streaming Application service started.

HeartBeat

This counter represents the heartbeat of the CMI service. This incremental count indicates that the CMI service is up and running. If the count does not increase (increment), the CMI service is down.

SMDIMessageCountInbound

This counter represents the running count of inbound SMDI messages since the last restart of the CMI service.

SMDIMessageCountInbound24Hour

This counter represents the rolling count of inbound SMDI messages in the last 24 hours.

SMDIMessageCountOutbound

This counter represents the running count of outbound SMDI messages since the last restart of the CMI service.

SMDIMessageCountOutbound24Hour

This counter represents the rolling count of outbound SMDI messages in the last 24 hours.

StartTime

This counter represents the time in milliseconds when the CMI service started. The real-time clock in the computer, which simply acts as a reference point that indicates the current time and the time that has elapsed, in milliseconds, since the service started, provides the basis for this time. The reference point specifies midnight, January 1, 1970.

CallsCompleted

This counter represents the total number of successful calls that were made from this MGCP Basic Rate Interface (BRI) device

Channel 1 Status

This counter represents the status of the indicated B-Channel that is associated with the MGCP BRI device. Possible values: 0 (Unknown) indicates the status of the channel could not be determined; 1 (Out of service) indicates that this channel is not available for use; 2 (Idle) indicates that this channel has no active call and is ready for use; 3 (Busy) indicates an active call on this channel; 4 (Reserved) indicates that this channel has been reserved for use as a D-channel or for use as a Synch-Channel for BRI.

Channel 2 Status

This counter represents the status of the indicated B-Channel that is associated with the MGCP BRI device. Possible values: 0 (Unknown) indicates the status of the channel could not be determined; 1 (Out of service) indicates that this channel is not available for use; 2 (Idle) indicates that this channel has no active call and is ready for use; 3 (Busy) indicates an active call on this channel; 4 (Reserved) indicates that this channel has been reserved for use as a D-channel or for use as a Synch-Channel for BRI.

DatalinkInService

This counter represents the state of the Data Link (D-Channel) on the corresponding digital access gateway. This value will get set to 1 (one) if the Data Link is up (in service) or 0 (zero) if the Data Link is down (out of service).

OutboundBusyAttempts

This counter represents the total number of times that a call through this MGCP BRI device was attempted when no voice channels are available.

CallsCompleted

This counter represents the total number of successful calls that were made from the port on an MGCP FXO device.

OutboundBusyAttempts

This counter represents the total number of times that a call through the port on this MGCP FXO device was attempted when no voice channels were available.

PortStatus

This counter represents the status of the FXO port associated with this MGCP FXO device.

CallsCompleted

This counter represents the total number of successful calls that were made from this port on the MGCP FXS device.

OutboundBusyAttempts

This counter represents the total number of times that a call through this port on the MGCP FXS device was attempted when no voice channels were available.

PortStatus

This counter represents the status of the FXS port that is associated with a MGCP FXS device.

BRIChannelsActive

This counter represents the number of BRI voice channels that are currently active in a call in the gateway

BRISpansInService

This counter represents the number of BRI spans that are currently available for use in the gateway.

FXOPortsActive

This counter represents the number of FXO ports that are currently active in a call in the gateway.

FXOPortsInService

This counter represents the number of FXO ports that are currently available for use in the gateway.

FXSPortsActive

This counter represents the number of FXS ports that are currently active in a call in the gateway.

FXSPortsInService

This counter represents the number of FXS ports that are currently available for use in the gateway.

PRIChannelsActive

This counter represents the number of PRI voice channels that are currently active in a call in the gateway.

PRISpansInService

This counter represents the number of PRI spans that are currently available for use in the gateway.

T1ChannelsActive

This counter represents the number of T1 CAS voice channels that are currently active in a call in the gateway.

T1SpansInService

This counter represents the number of T1 CAS spans that are currently available for use in the gateway.

CallsActive

This counter represents the number of calls that are currently active (in use) on this MGCP PRI device.

CallsCompleted

This counter represents the total number of successful calls that were made from this MGCP PRI device.

Channel 1 Status through Channel 15 Status (consecutively numbered)

This counter represents the status of the indicated B-Channel that is associated with a MGCP PRI device. Possible values: 0 (Unknown) indicates that the status of the channel could not be determined; 1 (Out of service) indicates that this channel is not available for use; 2 (Idle) indicates that this channel has no active call and is ready for use; 3 (Busy) indicates that an active call exists on this channel; 4 (Reserved) indicates that this channel has been reserved for use as a D-Channel or for use as a Synch-Channel for E-1.

Channel 16 Status

This counter represents the status of the indicated B-Channel that is associated with a MGCP PRI Device. Possible values: 0-Unknown, 1-Out of service, 2-Idle, 3-Busy, 4-Reserved, for an E1 PRI Interface, this channel is reserved for use as a D-Channel.

Channel 17 Status through Channel 31 Status (consecutively numbered)

This counter represents the status of the indicated B-Channel that is associated with the MGCP PRI Device. 0-Unknown, 1-Out of service, 2-Idle, 3-Busy, 4-Reserved.

DatalinkInService

This counter represents the state of the Data Link (D-Channel) on the corresponding digital access gateway. This value will be set to 1 (one) if the Data Link is up (in service) or 0 (zero) if the Data Link is down (out of service).

OutboundBusyAttempts

This counter represents the total number of times that a call through an MGCP PRI device was attempted when no voice channels were available.

CallsActive

This counter represents the number of calls that are currently active (in use) on this MGCP T1 CAS device.

CallsCompleted

This counter represents the total number of successful calls that were made from this MGCP T1 CAS device.

Channel 1 Status through Channel 24 Status (consecutively numbered)

This counter represents the status of the indicated B-Channel that is associated with an MGCP T1 CAS device. Possible values: 0 (Unknown) indicates the status of the channel could not be determined; 1 (Out of service) indicates that this channel is not available for use; 2 (Idle) indicates that this channel has no active call and is ready for use; 3 (Busy) indicates that an active call exists on this channel; 4 (Reserved) indicates that this channel has been reserved for use as a D-Channel or for use as a Synch-Channel for E-1.

OutboundBusyAttempts

This counter represents the total number of times that a call through the MGCP T1 CAS device was attempted when no voice channels were available.

MobileCallsAnchored

This counter represents the total number of paths that are associated with single-mode/dual-mode phone call that is currently anchored on a Unified Communications Manager. Call anchoring occurs when a call enters an enterprise gateway and connects to a mobility application that then uses redirection to send the call back out an enterprise gateway. For example, this counter increments twice for a dual-mode phone-to-dual-mode phone call: once for the originating call and once for the terminating call. When the call terminates, this counter decrements accordingly.

MobilityHandinsAborted

This counter represents the total number of aborted handins.

MobileHandinsCompleted

This counter represents the total number of handins that were completed by dual-mode phones. A completed handin occurs when the call successfully connects in the enterprise network and the phone moves from WAN to WLAN.

MobilityHandinsFailed

This counter represents the total number of handins (calls on mobile devices that move from cellular to the wireless network) that failed.

MobilityHandoutsAborted

This counter represents the total number of aborted handouts.

MobileHandoutsCompleted

This counter represents the total number of handouts (calls on mobile devices that move from the enterprise WLAN network to the cellular network) that were completed. A completed handout occurs when the call successfully connects.

MobileHandoutsFailed

This counter represents the total number of handouts (calls on mobile devices that move from cellular to the wireless network) that failed.

MobilityFollowMeCallsAttempted

This counter represents the total number of follow-me calls that were attempted.

MobilityFollowMeCallsIgnoredDueToAnswerTooSoon

This counter represents the total number of follow-me calls that were ignored before the AnswerTooSoon timer went off.

MobilityIVRCallsAttempted

This counter represents the total number of attempted IVR calls.

MobilityIVRCallsFailed

This counter represents the total number of failed IVR calls.

MobilityIVRCallsSucceeded

This counter represents the total number of successful IVR calls.

MobilitySCCPDualModeRegistered

This counter represents the total number of dual-mode SCCP devices that are registered.

MobilitySIPDualModeRegistered

This counter represents the total number of dual-mode SIP devices that are registered.

MOHHighestActiveResources

This counter represents the largest number of simultaneously active MOH connections for an MOH server. This number includes both multicast and unicast connections.

MOHMulticastResourceActive

This counter represents the number of currently active multicast connections to multicast addresses that are served by an MOH server.

Each MOH multicast resource uses one stream for each audio source and codec combination. For example, if the default audio source is configured for multicast, G.711 mu-law and wideband codecs, two streams get used (default audio source + G.711 mu-law and default audio source + wideband).

MOHMulticastResourceAvailable

This counter represents the number of multicast MOH connections to multicast addresses that are served by an MOH server that are not active and are still available to be used now for the MOH server.

Each MOH multicast resource uses one stream for each audio source and codec combination. For example, if the default audio source is configured for multicast, G.711 mu-law and wideband codecs, two streams get used (default audio source + G.711 mu-law and default audio source + wideband).

MOHOutOfResources

This counter represents the total number of times that the Media Resource Manager attempted to allocate an MOH resource when all available resources on all MOH servers that are registered with a Unified Communications Manager were already active.

MOHTotalMulticastResources

This counter represents the total number of multicast MOH connections that are allowed to multicast addresses that are served by an MOH server.

Each MOH multicast resource uses one stream for each audio source and codec combination. For example, if the default audio source is configured for multicast, G.711 mu-law and wideband codecs, two streams get used (default audio source + G.711 mu-law and default audio source + wideband).

MOHTotalUnicastResources

This counter represents the total number of unicast MOH connections that are allowed by an MOH server.

Each MOH unicast resource uses one stream.

MOHUnicastResourceActive

This counter represents the number of active unicast MOH connections to an MOH server.

Each MOH unicast resource uses one stream.

MOHUnicastResourceAvailable

This counter represents the number of unicast MOH connections that are not active and are still available to be used now for an MOH server.

Each MOH unicast resource uses one stream.

OutOfResources

This counter represents the total number of times that an attempt was made to allocate an MTP resource from an MTP device and failed; for example, because all resources were already in use.

ResourceActive

This counter represents the number of MTP resources that are currently in use (active) for an MTP device.

Each MTP resource uses two streams. An MTP in use represents one MTP resource that has been allocated for use in a call.

ResourceAvailable

This counter represents the total number of MTP resources that are not active and are still available to be used now for an MTP device.

Each MTP resource uses two streams. An MTP in use represents one MTP resource that has been allocated for use in a call.

ResourceTotal

This counter represents the total number of MTP resources that an MTP device provides. This counter equals the sum of the counters ResourceAvailable and ResourceActive.

ActiveCallListAndTrunkSubscriptions

This counter represents the active presence subscriptions for the call list feature as well as presence subscriptions through SIP trunk.

ActiveSubscriptions

This counter represents all active incoming and outgoing presence subscriptions.

CallListAndTrunkSubscriptionsThrottled

This counter represents the cumulative number of rejected call list and trunk side presence subscriptions due to throttling for the call list feature.

IncomingLineSideSubscriptions

This counter represents the cumulative number of presence subscriptions that were received on the line side.

IncomingTrunkSideSubscriptions

This counter represents the cumulative number of presence subscriptions that were received on the trunk side.

OutgoingTrunkSideSubscriptions

This counter represents the cumulative number of presence subscriptions that were sent on the trunk side.

CallForwardByRerouteCompleted

This counter represents the number of successful calls that has been forwarded by rerouting. Call forward by rerouting enables the path for a forwarded call to be optimized (minimizes the number of B-Channels in use) from the originator perspective. This counter resets when the CiscoCallManager service parameter Call Forward by Reroute Enabled is enabled or disabled, or when the Cisco CallManager Service restarts.

PathReplacementCompleted

This counter represents the number of successful path replacements that have occurred. Path replacement in a QSIG network optimizes the path between two edge PINX (PBXs) that are involved in a call. This counter resets when the CiscoCallManager service parameter Path Replacement Enabled is enabled or disabled, or when the Cisco CallManager Service restarts.

UDPPacketsThrottled

This counter represents the total number of incoming UDP packets that were throttled (dropped) because they exceeded the threshold for the number of incoming packets per second that is allowed from a single IP address. Configure the threshold via the SIP Station UDP Port Throttle Threshold and SIP Trunk UDP Port Throttle Threshold service parameters in Cisco Unified Communications Manager Administration. This counter increments for every throttled UDP packet that was received since the last restart of the Cisco CallManager Service.

CallsActive

This counter represents the number of calls that are currently active (in use) on this SIP device.

CallsAttempted

This counter represents the number of calls that have been attempted on this SIP device, including the successful and unsuccessful call attempts.

CallsCompleted

This counter represents the number of calls that were actually connected (a voice path was established) from a SIP device. This number increments when the call is terminated.

CallsInProgress

This counter represents the number of calls that are currently in progress on a SIP device, including all active calls. When all calls that are in progress are connected, the number of CallsInProgress equals the number of CallsActive.

VideoCallsActive

This counter represents the number of video calls with streaming video connections that are currently active (in use) on this SIP device.

VideoCallsCompleted

This counter represents the number of video calls that were actually connected with video streams for this SIP device. This number increments when the call is terminated.

DeviceResetAutomatically

This counter indicates the number of times that Unified Communications Manager automatically resets the device (SIP trunk). The device reset is based on the values that are specified in the Script Execution Error Recovery Action and System Resource Error Recovery Action fields on the SIP Normalization Script Configuration window in Cisco Unified Communications Manager Administration. When the device (SIP trunk) is reset due to script errors, the counter value increments. This count restarts when the device is reset manually.

DeviceResetManually

This counter indicates the number of times that the device (SIP trunk) is reset manually in Cisco Unified Communications Manager Administration or by other methods, such as AXL. When the device associated with a script is reset due to configuration changes, the counter value increments.

The counter restarts in the following situations:

• The SIP trunk is deleted.
• The script on the trunk gets changed or deleted.
• Unified Communications Manager restarts.

ErrorExecution

This counter represents the number of execution errors that occurred while the script executed. Execution errors can occur while a message handler executes. Execution errors can be caused by resource errors, an argument mismatch in a function call, and so on.

When an execution error occurs, Unified Communications Manager performs the following actions:

• Automatically restores the message to the original content before applying additional error handling actions.
• Increments the value of the counter.
• Takes appropriate action based on the configuration of the Script Execution Error Recovery Action and System Resource Error Recovery Action fields in Cisco Unified Communications Manager Administration.

Check the SIPNormalizationScriptError alarm for details, including the line number in the script that failed. Correct the script problem, upload the corrected script as needed, and reset the trunk. This counter increments every time an execution error occurs. This counter provides a count from the most recent trunk reset that involved a script configuration change. (A device reset alone does not restart the count; the script configuration must also change before the reset occurs.)

If the counter continues to increment after you fix the script problem, examine the script again.

ErrorInit

This counter represents the number of times a script error occurred after the script successfully loaded into memory, but failed to initialize in Unified Communications Manager. A script can fail to initialize due to resource errors, an argument mismatch in a function call, the expected table was not returned, and so on.

Check the SIPNormalizationScriptError alarm for details, including the line number in the script that failed. Correct the script problem, upload the corrected script as needed, and reset the trunk. This counter increments every time an initialization error occurs. This counter provides a count from the most recent trunk reset that was accompanied by a script configuration change. (A device reset alone does not restart the count; the script configuration must also change before the reset occurs.) If the counter continues to increment after you fix the script problem, examine the script again. When the error occurs during initialization, Unified Communications Manager automatically disables the script.

ErrorInternal

This counter indicates the number of internal errors that occurred while the script executed. Internal errors are very rare. If the value in this counter is higher than zero, a defect exists in the system that is not related to the script content or execution. Collect SDI traces and contact the Technical Assistance Center (TAC).

ErrorLoad

This counter represents the number of times a script error occurred when the script loaded into memory in Unified Communications Manager. A script can fail to load due to memory issues or syntax errors.

Check the SIPNormalizationScriptError alarm for details. Check the script syntax for errors, upload the corrected script as needed, and reset the trunk. This counter increments every time a load error occurs. This counter provides a count from the most recent trunk reset that was accompanied by a script configuration change. (A device reset alone will not restart the count; the script configuration must also change before the reset occurs.) If the counter continues to increment even after you fix the script problem, examine the script again.

ErrorResource

This counter indicates whether the script encountered a resource error.

Two kinds of resource errors exist: exceeding the value in the Memory Threshold field and exceeding the value in the Lua Instruction Threshold field. (Both fields display on the SIP Normalization Script Configuration window in Cisco Unified Communications Manager Administration.) If either condition occurs, Unified Communications Manager immediately closes the script and issues the SIPNormalizationScriptError alarm.

If a resource error occurs while the script loads or initializes, the script is disabled. If a resource error occurs during execution, the configured system resource error recovery action is taken. (The setting of the System Resource Error Recovery Action field on the SIP Normalization Script Configuration window in Cisco Unified Communications Manager Administration defines this action.)

MemoryUsage

This counter specifies the amount of memory, in bytes, that the script consumes. This counter increases and decreases to match the amount of memory that the script uses. This count gets cleared when the script closes (because a closed script does not consume memory) and restarts when the script opens (gets enabled). A high number in this counter indicates a resource problem. Check the MemoryUsagePercentage counter and the SIPNormalizationResourceWarning alarm, which occur when the resource consumption exceeds an internally set threshold.

MemoryUsagePercentage

This counter specifies the percentage of the total amount of memory that the script consumes.

The value in this counter is derived by dividing the value in the MemoryUsage counter by the value in the Memory Threshold field (in the SIP Normalization Script Configuration window) and multiplying the result by 100 to arrive at a percentage.

This counter increases and decreases in accordance with the MemoryUsage counter. This count gets cleared when the script closes (because closed scripts do not consume memory) and restarts when the script opens (gets enabled). When this counter reaches the internally controlled resource threshold, the SIPNormalizationResourceWarning alarm is issued.

MessageRollback

This counter indicates the number of times that the system automatically rolled back a message. The system rolls back the message by using the error handling that is specified in the Script Execution Error Recovery Action field in the SIP Normalization Script Configuration window in Cisco Unified Communications Manager Administration.

When an execution error occurs, Unified Communications Manager automatically restores the message to the original content before applying additional error handling actions. If error handling specifies Rollback only, no further action is taken beyond rolling back to the original message before the normalization attempt. For the other possible Script Execution Error Recovery Actions, message rollback always occurs first, followed by the specified action, such as disabling the script, resetting the script automatically, or resetting the trunk automatically.

msgAddContentBody

This counter represents the number of times that the script added a content body to the message. If you are using the msg:addContentBody API in the script, this counter increases each time that the msg:addContentBody API executes successfully. If the counter behavior is not as expected, examine the script logic for errors.

msgAddHeader

This counter represents the number of times that the script added a SIP header to the message. If you are using the msg:addHeader API in the script, this counter increases each time that the msg:addHeader API executes successfully. If the counter behavior is not as expected, examine the script logic for errors.

msgAddHeaderUriParameter

This counter represents the number of times that the script added a SIP header URI parameter to a SIP header in the message. If you are using the msg:addHeaderUriParameter API in the script, this counter increases each time that the msg:addHeaderUriParameter API executes successfully. If the counter behavior is not as expected, examine the script logic for errors.

msgAddHeaderValueParameter

This counter represents the number of times that the script added a SIP header value parameter to a SIP header in the message. If you are using the msg:addHeaderValueParameter API in the script, this counter increases each time that the msg:addHeaderValueParameter API executes successfully. If the counter behavior is not as expected, examine the script logic for errors.

msgApplyNumberMask

This counter represents the number of times that the script applied a number mask to a SIP header in the message. If you are using the msg:applyNumberMask API in the script, this counter increases each time that the msg:applyNumberMask API executes successfully. If the counter behavior is not as expected, examine the script logic for errors.

msgBlock

This counter represents the number of times that the script blocked a message. If you are using the msg:block API in the script, this counter increases each time that the msg:block API executes successfully. If the counter behavior is not as expected, examine the script logic for errors.

msgConvertDiversionToHI

This counter represents the number of times that the script converted Diversion headers into History-Info headers in the message. If you are using the msg:convertDiversionToHI API in the script, this counter increases each time that the msg:convertDiversionToHI API executes successfully. If the counter behavior is not as expected, examine the script logic for errors.

msgConvertHIToDiversion

This counter represents the number of times that the script converted Diversion headers into History-Info headers in the message. If you are using the msg:convertDiversionToHI API in the script, this counter increases each time that the msg:convertDiversionToHI API executes successfully. If the counter behavior is not as expected, examine the script logic for errors.

msgModifyHeader

This counter represents the number of times that the script modified a SIP header in the message. If you are using the msg:modifyHeader API in the script, this counter increases each time that the msg:modifyHeader API executes successfully. If the counter behavior is not as expected, examine the script logic for errors.

msgRemoveContentBody

This counter represents the number of times that the script removed a content body from the message. If you are using the msg:removeContentBody API in the script, this counter increases each time that the msg:removeContentBody API executes successfully. If the counter behavior is not as expected, examine the script logic for errors.

msgRemoveHeader

This counter represents the number of times that the script removed a SIP header from the message. If you are using the msg:removeHeader API in the script, this counter increases each time that the msg:removeHeader API executes successfully. If the counter behavior is not as expected, examine the script logic for errors.

msgRemoveHeaderValue

This counter represents the number of times that the script removed a SIP header value from the message. If you are using the msg:removeHeaderValue API in the script, this counter increases each time that the msg:removeHeaderValue API executes successfully. If the counter behavior is not as expected, examine the script logic for errors.

msgSetRequestUri

This counter represents the number of times that the script modified the request URI in the message. If you are using the msg:setRequestUri API in the script, this counter increases each time that the msg:setRequestUri API executes successfully. If the counter behavior is not as expected, examine the script logic for errors.

msgSetResponseCode

This counter represents the number of times that the script modified the response code and/or response phrase in the message. If you are using the msg:setResponseCode API in the script, this counter increases each time that the msg:setResponseCode API executes successfully. If the counter behavior is not as expected, examine the script logic for errors.

msgSetSdp

This counter represents the number of times that the script set the SDP in the message. If you are using the msg:setSdp API in the script, this counter increases each time that the msg:setSdp API executes successfully. If the counter behavior is not as expected, examine the script logic for errors.

ptAddContentBody

This counter represents the number of times that the script added a content body to the PassThrough (pt) object. If you are using the pt:addContentBody API in the script, this counter increases each time that the pt:addContentBody API executes successfully. If the counter behavior is not as expected, examine the script logic for errors.

ptAddHeader

This counter represents the number of times that the script added a SIP header to the PassThrough (pt) object. If you are using the pt:addHeader API in the script, this counter increases each time that the pt:addHeader API executes successfully. If the counter behavior is not as expected, examine the script logic for errors.

ptAddHeaderUriParameter

This counter represents the number of times that the script added a SIP header URI parameter to the PassThrough (pt) object. If you are using the pt:addHeaderUriParameter API in the script, this counter increases each time that the pt:addHeaderUriParameter API executes successfully. If the counter behavior is not as expected, examine the script logic for errors.

ptAddHeaderValueParameter

This counter represents the number of times that the script added a SIP header value parameter to the PassThrough (pt) object. If you are using the pt:addHeaderValueParameter API in the script, this counter increases each time that the pt:addHeaderValueParameter API executes successfully. If the counter behavior is not as expected, examine the script logic for errors.

ptAddRequestUriParameter

This counter represents the number of times that the script added a request URI parameter to the PassThrough (pt) object. If you are using the pt:addRequestUriParameter API in the script, this counter increases each time that the pt:addRequestUriParameter API executes successfully. If the counter behavior is not as expected, examine the script logic for errors.

ScriptActive

This counter indicates whether the script is currently active (running on the trunk). The following values display for the counter:

• 0—Indicates that the script is closed (disabled).
• 1—Indicates that the script is open and operational.

To open the script that should be running on this trunk, perform the following actions:

1. Check for any alarms that might indicate why the script is not open.

2. Correct any errors.

3. Upload a new script if necessary.

4. Reset the trunk.

ScriptClosed

This counter indicates the number of times that Unified Communications Manager has closed the script.

When the script is closed, it is not enabled on this device.

Unified Communications Manager closes the script under one of the following conditions:

• The device was reset manually.
• The device was reset automatically (due to an error).
• The device was deleted.

This count restarts when the SIP trunk is reset after a change to the script configuration and when Unified Communications Manager restarts.

ScriptDisabledAutomatically

This counter indicates the number of times that the system automatically disabled the script. The values that are specified in the Script Execution Error Recovery Action and System Resource Error Recovery Action fields in the SIP Normalization Script Configuration window in Cisco Unified Communications Manager Administration determine whether the script is disabled. The script also gets disabled as a result of script error conditions that are encountered during loading and initialization. This counter provides a count from the most recent manual device reset that involved a script configuration change (a device reset alone does not restart the count; the script must also have changed before the reset occurs). This counter increments every time Unified Communications Manager automatically disables a script due to script errors.

If the number in this counter is higher than expected, perform the following actions:

• Check for SIPNormalizationScriptError alarm and SIPNormalizationAutoResetDisabled alarm.
• Check for any resource-related alarms and counters in RTMT to determine whether a resource issue is occurring.
• Check for any unexpected SIP normalization events in the SDI trace files.

ScriptOpened

This counter indicates the number of times that the Unified Communications Manager attempted to open the script. For the a script to open, it must load into memory in Unified Communications Manager, initialize, and be operational. A number greater than one in this counter means that Unified Communications Manager has made more than one attempt to open the script on this SIP trunk, either for an expected reason or due to an error during loading or initialization. The error can occur due to execution errors or resource errors or invalid syntax in the script. Expect this counter to be greater than one if any of these counters increment: DeviceResetManually, DeviceResetAutomatically, or ScriptResetAutomatically. The DeviceResetManually counter increments when an expected event, such as a maintenance window on the SIP trunk, causes the script to close.

If the number in this counter is high for an unexpected reason, perform the following actions:

• Check for alarms, such as the SIPNormalizationScriptClosed, SIPNormalizationScriptError, or SIPNormalizationResourceWarning.
• Check resource-related alarms and counters in RTMT to determine whether a resource issue is occurring.
• Check for any unexpected SIP normalization events in the SDI trace files.

This count restarts when the SIP trunk resets after a script configuration change and when Unified Communications Manager restarts.

ScriptResetAutomatically

This counter indicates the number of times that the system automatically reset the script. The script resets based on the values that are specified in the Script Execution Error Recovery Action and System Resource Error Recovery Action fields in the SIP Normalization Script Configuration window in Cisco Unified Communications Manager Administration. This counter specifies a count of the number of automatic script resets after the last manual device reset; this counter increments every time the Unified Communications Manager automatically resets a script due to script errors.

If the number in this counter is higher than expected, perform the following actions:

• Check for a SIPNormalizationScriptError alarm.
• Check for any resource-related alarms and counters in RTMT to determine whether a resource issue is occurring.
• Check for any unexpected SIP normalization events in the SDI trace files.

AckIns

This counter represents the total number of ACK requests that the SIP device received.

AckOuts

This counter represents the total number of ACK requests that the SIP device sent.

ByeIns

This counter represents the total number of BYE requests that the SIP device received. This number includes retransmission.

ByeOuts

This counter represents the total number of BYE requests that the SIP device sent. This number includes retransmission.

CancelIns

This counter represents the total number of CANCEL requests that the SIP device received. This number includes retransmission.

CancelOuts

This counter represents the total number of CANCEL requests that the SIP device sent. This number includes retransmission.

CCBsAllocated

This counter represents the number of Call Control Blocks (CCB) that are currently in use by the SIP stack. Each active SIP dialog uses one CCB.

GlobalFailedClassIns

This counter represents the total number of 6xx class SIP responses that the SIP device has received. This number includes retransmission. This class of responses indicates that a SIP device, that is providing a client function, received a failure response message. Generally, the responses indicate that a server had definitive information on a particular called party and not just the particular instance in the Request-URI.

GlobalFailedClassOuts

This counter represents the total number of 6xx class SIP responses that the SIP device sent. This number includes retransmission. This class of responses indicates that a SIP device, that is providing a server function, received a failure response message. Generally, the responses indicate that a server had definitive information on a particular called party and not just the particular instance in the Request-URI.

InfoClassIns

This counter represents the total number of 1xx class SIP responses that the SIP device received. This includes retransmission. This class of responses provides information on the progress of a SIP request.

InfoClassOuts

This counter represents the total number of 1xx class SIP responses that the SIP device sent. This includes retransmission. This class of responses provides information on the progress of processing a SIP request.

InfoIns

This counter represents the total number of INFO requests that the SIP device has received. This number includes retransmission.

InfoOuts

This counter represents the total number of INFO requests that the SIP device has sent. This number includes retransmission.

InviteIns

This counter represents the total number of INVITE requests that the SIP device received. This number includes retransmission.

InviteOuts

This counter represents the total number of INVITE requests that the SIP device has sent. This number includes retransmission.

NotifyIns

This counter represents the total number of NOTIFY requests that the SIP device has received. This number includes retransmission.

NotifyOuts

This counter represents the total number of NOTIFY requests that the SIP device has sent. This number includes retransmission.

OptionsIns

This counter represents the total number of OPTIONS requests that the SIP device received. This number includes retransmission.

OptionsOuts

This counter represents the total number of OPTIONS requests that the SIP device has sent. This number includes retransmission.

PRAckIns

This counter represents the total number of PRACK requests that the SIP device has received. This number includes retransmission.

PRAckOuts

This counter represents the total number of PRACK requests that the SIP device has sent. This number includes retransmission.

PublishIns

This counter represents the total number of PUBLISH requests that the SIP device received. This number includes retransmissions.

PublishOuts

This counter represents the total number of PUBLISH requests that the SIP device has sent. This number includes retransmission

RedirClassIns

This counter represents the total number of 3xx class SIP responses that the SIP device has received. This number includes retransmission. This class of responses provides information about redirections to addresses where the callee may be reachable.

RedirClassOuts

This counter represents the total number of 3xx class SIP responses that the SIP device has sent. This number includes retransmission. This class of responses provides information about redirections to addresses where the callee may be reachable.

ReferIns

This counter represents the total number of REFER requests that the SIP device has received. This number includes retransmission.

ReferOuts

This counter represents the total number of REFER requests that the SIP device has sent. This number includes retransmission.

RegisterIns

This counter represents the total number of REGISTER requests that the SIP device has received. This number includes retransmission.

RegisterOuts

This counter represents the total number of REGISTER requests that the SIP device has sent. This number includes retransmission.

RequestsFailedClassIns

This counter represents the total number of 4xx class SIP responses that the SIP device has received. This number includes retransmission. This class of responses indicates a request failure by a SIP device that is providing a client function.

RequestsFailedClassOuts

This counter represents the total number of 4xx class SIP responses that the SIP device has sent. This number includes retransmission. This class of responses indicates a request failure by a SIP device that is providing a server function.

RetryByes

This counter represents the total number of BYE retries that the SIP device has sent. To determine the number of first BYE attempts, subtract the value of this counter from the value of the sipStatsByeOuts counter.

RetryCancels

This counter represents the total number of CANCEL retries that the SIP device has sent. To determine the number of first CANCEL attempts, subtract the value of this counter from the value of the sipStatsCancelOuts counter.

RetryInfo

This counter represents the total number of INFO retries that the SIP device has sent. To determine the number of first INFO attempts, subtract the value of this counter from the value of the sipStatsInfoOuts counter.

RetryInvites

This counter represents the total number of INVITE retries that the SIP device has sent. To determine the number of first INVITE attempts, subtract the value of this counter from the value of the sipStatsInviteOuts counter.

RetryNotify

This counter represents the total number of NOTIFY retries that the SIP device has sent. To determine the number of first NOTIFY attempts, subtract the value of this counter from the value of the sipStatsNotifyOuts counter.

RetryPRAck

This counter represents the total number of PRACK retries that the SIP device has sent. To determine the number of first PRACK attempts, subtract the value of this counter from the value of the sipStatsPRAckOuts counter.

RetryPublish

This counter represents the total number of PUBLISH retries that the SIP device has been sent. To determine the number of first PUBLISHs attempts, subtract the value of this counter from the value of the sipStatsPublishOuts counter.

RetryRefer

This counter represents the total number of REFER retries that the SIP device has sent. To determine the number of first REFER attempts, subtract the value of this counter from the value of the sipStatsReferOuts counter.

RetryRegisters

This counter represents the total number of REGISTER retries that the SIP device has sent. To determine the number of first REGISTER attempts, subtract the value of this counter from the value of the sipStatsRegisterOuts counter.

RetryRel1xx

This counter represents the total number of Reliable 1xx retries that the SIP device has sent.

RetryRequestsOut

This counter represents the total number of Request retries that the SIP device has sent.

RetryResponsesFinal

This counter represents the total number of Final Response retries that the SIP device has sent.

RetryResponsesNonFinal

This counter represents the total number of non-Final Response retries that the SIP device has sent.

RetrySubscribe

This counter represents the total number of SUBSCRIBE retries that the SIP device has sent. To determine the number of first SUBSCRIBE attempts, subtract the value of this counter from the value of the sipStatsSubscribeOuts counter.

RetryUpdate

This counter represents the total number of UPDATE retries that the SIP device has sent. To determine the number of first UPDATE attempts, subtract the value of this counter from the value of the sipStatsUpdateOuts counter.

SCBsAllocated

This counter represents the number of Subscription Control Blocks (SCB) that are currently in use by the SIP stack. Each subscription uses one SCB.

ServerFailedClassIns

This counter represents the total number of 5xx class SIP responses that the SIP device has received. This number includes retransmission. This class of responses indicates that failure responses were received by a SIP device that is providing a client function.

ServerFailedClassOuts

This counter represents the total number of 5xx class SIP responses that the SIP device has sent. This number includes retransmission. This class of responses indicates that failure responses were received by a SIP device that is providing a server function.

SIPGenericCounter1

Do not use this counter unless directed to do so by a Cisco Engineering Special build. Cisco uses information in this counter for diagnostic purposes.

SIPGenericCounter2

Do not use this counter unless directed to do so by a Cisco Engineering Special build. Cisco uses information in this counter for diagnostic purposes.

SIPGenericCounter3

Do not use this counter unless directed to do so by a Cisco Engineering Special build. Cisco uses information in this counter for diagnostic purposes.

SIPGenericCounter4

Do not use this counter unless directed to do so by a Cisco Engineering Special build. Cisco uses information in this counter for diagnostic purposes.

SIPHandlerSDLQueueSignalsPresent

This counter represents the number of SDL signals that are currently on the four SDL priority queues of the SIPHandler component. The SIPHandler component contains the SIP stack.

StatusCode1xxIns

This counter represents the total number of 1xx response messages, including retransmission, that the SIP device has received. This count includes the following 1xx responses:

• 100 Trying
• 180 Ringing
• 181 Call is being forwarded
• 182 Queued
• 183 Session Progress

StatusCode1xxOuts

This counter represents the total number of 1xx response messages, including retransmission, that the SIP device has sent. This count includes the following 1xx responses:

• 100 Trying
• 180 Ringing
• 181 Call is being forwarded
• 182 Queued
• 183 Session Progress

StatusCode2xxIns

This counter represents the total number of 2xx response messages, including retransmission, that the SIP device has received. This count includes the following 2xx responses:

• 200 OK
• 202 Success Accepted

StatusCode2xxOuts

This counter represents the total number of 2xx response messages, including retransmission, that the SIP device has sent. This count includes the following 2xx responses:

• 200 OK
• 202 Success Accepted

StatusCode3xxins

This counter represents the total number of 3xx response messages, including retransmission, that the SIP device has received. This count includes the following 3xx responses:

• 300 Multiple Choices
• 301 Moved Permanently
• 302 Moved Temporarily
• 303 Incompatible Bandwidth Units
• 305 Use Proxy
• 380 Alternative Service

StatusCode302Outs

This counter represents the total number of 302 Moved Temporarily response messages, including retransmission, that the SIP device has sent.

StatusCode4xxIns

This counter represents the total number of 4xx response messages, including retransmission, that the SIP device has received. This count includes the following 4xx responses:

• 400 Bad Request
• 401 Unauthorized
• 402 Payment Required
• 403 Forbidden
• 404 Not Found
• 405 Method Not Allowed
• 406 Not Acceptable
• 407 Proxy Authentication Required
• 408 Request Timeout
• 409 Conflict
• 410 Gone
• 413 Request Entity Too Large
• 414 Request-URI Too Long
• 415 Unsupported Media Type
• 416 Unsupported URI Scheme
• 417 Unknown Resource Priority
• 420 Bad Extension
• 422 Session Expires Value Too Small
• 423 Interval Too Brief
• 480 Temporarily Unavailable
• 481 Call/Transaction Does Not Exist
• 482 Loop Detected
• 483 Too Many Hops
• 484 Address Incomplete
• 485 Ambiguous
• 486 Busy Here
• 487 Request Terminated
• 488 Not Acceptable Here
• 489 Bad Subscription Event
• 491 Request Pending

StatusCode4xxOuts

This counter represents the total number of 4xx response messages, including retransmission, that the SIP device has sent. This count includes the following 4xx responses:

• 400 Bad Request
• 401 Unauthorized
• 402 Payment Required
• 403 Forbidden
• 404 Not Found
• 405 Method Not Allowed
• 406 Not Acceptable
• 407 Proxy Authentication Required
• 408 Request Timeout
• 409 Conflict
• 410 Gone
• 413 Request Entity Too Large
• 414 Request-URI Too Long
• 415 Unsupported Media Type
• 416 Unsupported URI Scheme
• 417 Unknown Resource Priority
• 420 Bad Extension
• 422 Session Expires Value Too Small
• 423 Interval Too Brief
• 480 Temporarily Unavailable
• 481 Call/Transaction Does Not Exist
• 482 Loop Detected
• 483 Too Many Hops
• 484 Address Incomplete
• 485 Ambiguous
• 486 Busy Here
• 487 Request Terminated
• 488 Not Acceptable Here
• 489 Bad Subscription Event
• 491 Request Pending

StatusCode5xxIns

This counter represents the total number of 5xx response messages, including retransmission, that the SIP device has received. This count includes the following 5xx responses:

• 500 Server Internal Error
• 501 Not Implemented
• 502 Bad Gateway
• 503 Service Unavailable
• 504 Server Timeout
• 505 Version Not Supported
• 580 Precondition Failed

StatusCode5xxOuts

This counter represents the total number of 5xx response messages, including retransmission, that the SIP device has sent. This count includes the following 5xx responses:

• 500 Server Internal Error
• 501 Not Implemented
• 502 Bad Gateway
• 503 Service Unavailable
• 504 Server Timeout
• 505 Version Not Supported
• 580 Precondition Failed

StatusCode6xxIns

This counter represents the total number of 6xx response messages, including retransmission, that the SIP device has received. This count includes the following 6xx responses:

• 600 Busy Everywhere
• 603 Decline
• 604 Does Not Exist Anywhere
• 606 Not Acceptable

StatusCode6xxOuts

This counter represents the total number of 6xx response messages, including retransmission, that the SIP device has sent. This count includes the following 6xx responses:

• 600 Busy Everywhere
• 603 Decline
• 604 Does Not Exist Anywhere
• 606 Not Acceptable

SubscribeIns

This counter represents the total number of SUBSCRIBE requests that the SIP device has received. This number includes retransmission.

SubscribeOuts

This counter represents the total number of SUBSCRIBE requests that the SIP device has sent. This number includes retransmission.

SuccessClassIns

This counter represents the total number of 2xx class SIP responses that the SIP device has received. This includes retransmission. This class of responses provides information on the successful completion of a SIP request.

SuccessClassOuts

This counter represents the total number of 2xx class SIP responses that the SIP device has sent. This includes retransmission. This class of responses provides information on the successful completion of a SIP request.

SummaryRequestsIn

This counter represents the total number of SIP request messages that have been received by the SIP device. This number includes retransmissions.

SummaryRequestsOut

This counter represents the total number of SIP request messages that the device sent. This number includes messages that originate on the device and messages that are being relayed by the device. When a particular message gets sent more than once, each transmission gets counted separately; for example, a message that is re-sent as a retransmission or as a result of forking.

SummaryResponsesIn

This counter represents the total number of SIP response messages that the SIP device received. This number includes retransmission.

SummaryResponsesOut

This counter represents the total number of SIP response messages that the SIP device sent (originated and relayed). This number includes retransmission.

UpdateIns

This counter represents the total number of UPDATE requests that the SIP device has received. This number includes retransmission.

UpdateOuts

This counter represents the total number of UPDATE requests that the SIP device has sent. This number includes retransmission.

ConfigMismatchesPersistent

This counter represents the number of times that a phone that is running SIP was persistently unable to register due to a configuration version mismatch between the TFTP server and Unified Communications Manager since the last restart of the Unified Communications Manager. This counter increments each time that Unified Communications Manager cannot resolve the mismatch and manual intervention is required (such as a configuration update or device reset).

ConfigMismatchesTemporary

This counter represents the number of times that a phone that is running SIP was temporarily unable to register due to a configuration version mismatch between the TFTP server and Unified Communications Manager since the last restart of the Cisco CallManager Service. This counter increments each time Unified Communications Manager is able to resolve the mismatch automatically.

DBTimeouts

This counter represents the number of new registrations that failed because a timeout occurred while the system was attempting to retrieve the device configuration from the database.

NewRegAccepted

This counter represents the total number of new REGISTRATION requests that have been removed from the NewRegistration queue and processed since the last restart of the Cisco CallManager Service.

NewRegQueueSize

This counter represents the number of REGISTRATION requests that are currently on the NewRegistration queue. The system places REGISTRATION requests that are received from devices that are not currently registered on this queue before they are processed.

NewRegRejected

This counter represents the total number of new REGISTRATION requests that were rejected with a 486 Busy Here response and not placed on the NewRegistration queue since the last restart of the Cisco CallManager Service. The system rejects REGISTRATION requests if the NewRegistration queue exceeds a programmed size.

TokensAccepted

This counter represents the total number of token requests that have been granted since the last Unified Communications Manager restart. Unified Communications Manager grants tokens as long as the number of outstanding tokens remains below the number that is specified in the Cisco CallManager service parameter Maximum Phone Fallback Queue Depth.

TokensOutstanding

This counter represents the number of devices that have been granted a token but have not yet registered. The system requires that devices that are reconnecting to a higher priority Unified Communications Manager server be granted a token before registering. Tokens protect Unified Communications Manager from being overloaded with registration requests when it comes back online after a failover situation.

TokensRejected

This counter represents the total number of token requests that have been rejected since the last Unified Communications Manager restart. Unified Communications Manager will reject token request if the number of outstanding tokens is greater than the number that is specified in the Cisco CallManager service parameter Maximum Phone Fallback Queue Depth.

OutOfResources

This counter represents the total number of times that an attempt was made to allocate a conference resource from a SW conference device and failed because all resources were already in use.

ResourceActive

This counter represents the number of resources that are currently in use (active) for a SW conference device. One resource represents one stream.

ResourceAvailable

This counter represents the total number of resources that are not active and are still available to be used now for a SW conference device. One resource represents one stream.

ResourceTotal

This counter represents the total number of conference resources that a SW conference device provides. One resource represents one stream.This counter equals the sum of the ResourceAvailable and ResourceActive counters.

SWConferenceActive

This counter represents the number of software-based conferences that are currently active (in use) on a SW conference device.

SWConferenceCompleted

This counter represents the total number of conferences that have been allocated and released on a SW conference device. A conference starts when the first call connects to the bridge. The conference completes when the last call disconnects from the bridge.

ConferencesActive

This counter represents the total number of active conferences on all Cisco Telepresence MCU conference bridge devices that are registered with Unified Communications Manager.

ConferencesCompleted

This counter represents the total number of conferences that used a Cisco Telepresence MCU conference bridge allocated from Unified Communications Manager and completed, implying that the conference bridge was allocated and released. A conference is activated when the first call is connected to the bridge. The conference is completed when the last call is disconnected from the bridge.

HttpConnectionErrors

This counter represents the total number of times Unified Communications Manager attempted to create HTTP connections to Cisco Telepresence MCU conference bridge device, and failed due to connection errors on the Cisco Telepresence MCU conference bridge side.

HttpNon200OKResponse

This counter represents the total number of times Unified Communications Manager received a non 200 OK HTTP Response from Cisco Telepresence MCU conference bridge, for any HTTP query sent.

OutOfResources

This counter represents the total number of times Unified Communications Manager attempted to allocate a conference resource from Cisco Telepresence MCU conference bridge device and failed. For example, the attempt to allocate a conference resource fails, if all the resources are already in use.

BuildAbortCount

This counter represents the number of times that the build process aborted when it received a Build all request. This counter increases when building of device/unit/softkey/dial rules gets aborted as a result of group level change notifications.

BuildCount

This counter represents the number of times since the TFTP service started that the TFTP server has built all the configuration files in response to a database change notification that affects all devices. This counter increases by one every time the TFTP server performs a new build of all the configuration files.

BuildDeviceCount

This counter represents the number of devices that were processed in the last build of all the configuration files. This counter also updates while processing device change notifications. The counter increases when a new device is added and decreases when an existing device is deleted.

BuildDialruleCount

This counter represents the number of dial rules that were processed in the last build of the configuration files. This counter also updates while processing dial rule change notifications. The counter increases when a new dial rule is added and decreases when an existing dial rule is deleted.

BuildDuration

This counter represents the time in seconds that it took to build the last configuration files.

BuildSignCount

This counter represents the number of security-enabled phone devices for which the configuration file was digitally signed with the Unified Communications Manager server key in the last build of all the configuration files. This counter also updates while processing security-enabled phone device change notifications.

BuildSoftKeyCount

This counter represents the number of softkeys that were processed in the last build of the configuration files. This counter increments when a new softkey is added and decrements when an existing softkey is deleted.

BuildUnitCount

This counter represents the number of gateways that were processed in the last build of all the configuration files. This counter also updates while processing unit change notifications. The counter increases when a new gateway is added and decreases when an existing gateway is deleted.

ChangeNotifications

This counter represents the total number of all the Unified Communications Manager database change notifications that the TFTP server received. Each time that a device configuration is updated in Unified Communications Manager, the TFTP server gets sent a database change notification to rebuild the XML file for the updated device.

DeviceChangeNotifications

This counter represents the number of times that the TFTP server received database change notification to create, update, or delete configuration files for devices.

DialruleChangeNotifications

This counter represents the number of times that the TFTP server received database change notification to create, update, or delete configuration files for dial rules.

EncryptCount

This counter represents the number of configuration files that were encrypted. This counter gets updated each time a configuration file is successfully encrypted

GKFoundCount

This counter represents the number of GK files that were found in the cache. This counter gets updated each time a GK file is found in the cache

GKNotFoundCount

This counter represents the number of GK files that were not found in the cache. This counter gets updated each time a request to get a GK file results in the cache not finding it

HeartBeat

This counter represents the heartbeat of the TFTP server. This incremental count indicates that the TFTP server is up and running. If the count does not increase, this means that the TFTP server is down.

HttpConnectRequests

This counter represents the number of clients that are currently requesting the HTTP GET file request.

HttpRequests

This counter represents the total number of file requests (such as requests for XML configuration files, phone firmware files, audio files, and so on.) that the HTTP server handled. This counter represents the sum total of the following counters since the HTTP service started: RequestsProcessed, RequestsNotFound, RequestsOverflow, RequestsAborted, and RequestsInProgress.

HttpRequestsAborted

This counter represents the total number of HTTP requests that the HTTP server. canceled (aborted) unexpectedly. Requests could get aborted if the requesting device cannot be reached (for instance, the device lost power) or if the file transfer was interrupted due to network connectivity problems.

HttpRequestsNotFound

This counter represents the total number of HTTP requests where the requested file was not found. When the HTTP server does not find the requested file, a message gets sent to the requesting device.

HttpRequestsOverflow

This counter represents the total number of HTTP requests that were rejected when the maximum number of allowable client connections was reached. The requests may have arrived while the TFTP server was building the configuration files or because of some other resource limitation. The Cisco TFTP advanced service parameter, Maximum Serving Count, sets the maximum number of allowable connections.

HttpRequestsProcessed

This counter represents the total number of HTTP requests that the HTTP server. successfully processed.

HttpServedFromDisk

This counters represents the number of requests that the HTTP server completed with the files that are on disk and not cached in memory.

LDFoundCount

This counter represents the number of LD files that were found in the cache. This counter gets updated each time a LD file is found in cache memory.

LDNotFoundCount

This counter represents the number of LD files that were not found in cache memory. This counter gets updated each time a request to get an LD file results in the cache not finding it.

MaxServingCount

This counter represents the maximum number of client connections that the TFTP can serve simultaneously. The Cisco TFTP advanced service parameter, Maximum Serving Count, sets this value.

Requests

This counter represents the total number of file requests (such as requests for XML configuration files, phone firmware files, audio files, and so on.) that the TFTP server handles. This counter represents the sum total of the following counters since the TFTP service started: RequestsProcessed, RequestsNotFound, RequestsOverflow, RequestsAborted, and RequestsInProgress.

RequestsAborted

This counter represents the total number of TFTP requests that the TFTP server canceled (aborted) unexpectedly. Requests could be aborted if the requesting device cannot be reached (for instance, the device lost power) or if the file transfer was interrupted due to network connectivity problems.

RequestsInProgress

This counter represents the number of file requests that the TFTP server currently is processing. This counter increases for each new file request and decreases for each file request that is completed. This counter indicates the current load of the TFTP server.

RequestsNotFound

This counter represents the total number of TFTP requests for which the requested file was not found. When the TFTP server does not find the requested file, a message gets sent to the requesting device. If this counter increments in a cluster that is configured as secure, this event usually indicates an error condition. If, however, the cluster is configured as non-secure, it is normal for the CTL file to be absent (not found), which results in a message being sent to the requesting device and a corresponding increment in this counter. For non-secure clusters, then, this normal occurrence does not represent an error condition.

RequestsOverflow

This counter represents the total number of TFTP requests that were rejected because the maximum number of allowable client connections was exceeded, because requests arrived while the TFTP server was building the configuration files, or because of some other resource limitation. The Cisco TFTP advanced service parameter, Maximum Serving Count, sets the maximum number of allowable connections.

RequestsProcessed

This counter represents the total number of TFTP requests that the TFTP server successfully processed.

SegmentsAcknowledged

This counter represents the total number of data segments that the client devices acknowledged. Files get sent to the requesting device in data segments of 512 bytes, and for each 512-byte segment, the device sends the TFTP server an acknowledgment message. Each additional data segment gets sent upon receipt of the acknowledgment for the previous data segment until the complete file successfully gets transmitted to the requesting device.

SegmentsFromDisk

This counter represents the number of data segments that the TFTP server reads from the files on disk, while serving files.

SegmentSent

This counter represents the total number of data segments that the TFTP server sent. Files get sent to the requesting device in data segments of 512 bytes.

SEPFoundCount

This counter represents the number of SEP files that were successfully found in the cache. This counter gets updated each time that a SEP file is found in the cache.

SEPNotFoundCount

This counter represents the number of SEP files that were not found in the cache. This counter gets updated each time that a request to get a SEP file produces a not found in cache memory result.

SIPFoundCount

This counter represents the number of SIP files that were successfully found in the cache. This counter gets updated each time that a SIP file is found in the cache

SIPNotFoundCount

This counter represents the number of SIP files that were not found in the cache. This counter gets updated each time that a request to get a SIP file produces a not found in cache memory result.

SoftkeyChangeNotifications

This counter represents the number of times that the TFTP server received database change notification to create, update, or delete configuration files for softkeys.

UnitChangeNotifications

This counter represents the number of times that the TFTP server received database change notification to create, update, or delete gateway-related configuration files.

OutOfResources

This counter represents the total number of times that an attempt was made to allocate a transcoder resource from a transcoder device and failed; for example, because all resources were already in use.

ResourceActive

This counter represents the number of transcoder resources that are currently in use (active) for a transcoder device.

Each transcoder resource uses two streams.

ResourceAvailable

This counter represents the total number of resources that are not active and are still available to be used now for a transcoder device.

Each transcoder resource uses two streams.

ResourceTotal

This counter represents the total number of transcoder resources that a transcoder device provided. This counter equals the sum of the counters ResourceActive and ResourceAvailable.

ConferencesActive

This counter represents the total number of video conferences that are currently active (in use) on a video conference bridge device. The system specifies a conference as active when the first call connects to the bridge.

ConferencesAvailable

This counter represents the number of video conferences that are not active and are still available on a video conference device.

ConferencesCompleted

This counter represents the total number of video conferences that have been allocated and released on a video conference device. A conference starts when the first call connects to the bridge. The conference completes when the last call disconnects from the bridge.

ConferencesTotal

This counter represents the total number of video conferences that are configured for a video conference device.

OutOfConferences

This counter represents the total number of times that an attempt was made to initiate a video conference from a video conference device and failed because the device already had the maximum number of active conferences that is allowed (as specified by the TotalConferences counter).

OutOfResources

This counter represents the total number of times that an attempt was made to allocate a conference resource from a video conference device and failed, for example, because all resources were already in use.

ResourceActive

This counter represents the total number of resources that are currently active (in use) on a video conference bridge device. One resource gets used per participant.

ResourceAvailable

This counter represents the total number of resources that are not active and are still available on a device to handle additional participants for a video conference bridge device.

ResourceTotal

This counter represents the total number of resources that are configured on a video conference bridge device. One resource gets used per participant.

CallsCompleted

This counter represents the number of Make Call and End Call requests that the Cisco Web Dialer application successfully completed.

CallsFailed

This counter represents the number of Make Call and End Call requests that were unsuccessful.

RedirectorSessionsHandled

This counter represents the total number of HTTP sessions that the Redirector servlet handled since the last service startup.

RedirectorSessionsInProgress

This counter represents the number of HTTP sessions that are currently being serviced by the Redirector servlet.

RequestsCompleted

This counter represents the number of Make Call and End Call requests that the WebDialer servlet has successfully completed.

RequestsFailed

This counter represents the number of Make Call and End Call requests that failed.

SessionsHandled

This counter represents the total number of CTI sessions that the Cisco Web Dialer servlet handled since the last service startup.

SessionsInProgress

This counter represents the number of CTI sessions that the Cisco Web Dialer servlet is currently servicing.

CallsActive

This counter represents the number of calls that are currently active (in use) on the WSMConnector device.

CallsAttempted

This counter represents the number of calls that have been attempted on the WSMConnector device, including both successful and unsuccessful call attempts.

CallsCompleted

This counter represents the number of calls that are connected (a voice path was established) through the WSMConnector device. The counter increments when the call terminates.

CallsInProgress

This counter represents the number of calls that are currently in progress on the WSMConnector device. This includes all active calls. When the number of CallsInProgress equals the number of CallsActive, this indicates that all calls are connected.

DMMSRegistered

This counter represents the number of DMMS subscribers that are registered to the WSM.

CallsAccepted

This counter indicates the number of Cisco IME calls that the Unified Communications Manager received successfully and that the called party answered, resulting in an IP call.

CallsAttempted

This counter indicates the number of calls that the Unified Communications Manager received through Cisco IME. This number includes accepted calls, failed calls, and busy, no-answer calls. The counter increments each time that Unified Communications Manager receives a call through Cisco IME.

CallsReceived

This counter indicates the number of calls that Unified Communications Manager receives through Cisco IME. This number includes accepted calls, failed calls, and busy, no-answer calls. The counter increments on call initiation.

CallsSetup

This counter indicates the number of Cisco IME calls that Unified Communications Manager placed successfully and that the remote party answered, resulting in an IP call.

DomainsUnique

This counter indicates the number of unique domain names of peer enterprises that the Cisco IME client discovered. The counter serves as an indicator of overall system usage.

FallbackCallsFailed

This counter indicates the total number of failed fallback attempts.

FallbackCallsSuccessful

This counter indicates the total number of Cisco IME calls that have fallen back to the PSTN mid-call due to a quality problem. The counter includes calls initiated and calls received by this Unified Communications Manager.

IMESetupsFailed

This counter indicates the total number of call attempts for which a Cisco IME route was available but that were set up through the PSTN due to a failure to connect to the target over the IP network.

RoutesLearned

This counter indicates the total number of distinct phone numbers that the Cisco IME has learned and that are present as routes in the Unified Communications Manager routing tables. If this number grows too large, the server may exceed the per-cluster limit, and you may need to add additional servers to your cluster.

RoutesPublished

This counter indicates the total number of DIDs that were published successfully into the IME distributed cache across all Cisco IME client instances. The counter provides a dynamic measurement that gives you an indication of your own provisioned usage and a sense of how successful the system has been in storing the DIDs in the network.

RoutesRejected

This counter indicates the number of learned routes that were rejected because the the administrator restricted the particular number or domain. This counter provides an indication of the number of cases where a VoIP call cannot happen in the future because of the blocked validation.

VCRUploadRequests

This counter indicates the number of voice call record (VCR) upload requests that the Unified Communications Manager has sent to the Cisco IME server to be stored in the IME distributed cache.

IMEServiceStatus

This counter indicates the overall health of the connection to the Cisco IME services for a particular Cisco IME client instance (Unified Communications Manager). The following values may display for the counter:

• 0—Indicates an unknown state (which may mean that the Cisco IME service is not active).

  If the value specifies 0, an alert gets generated once per hour while the connection remains in the unknown state.

• 1—Indicates a healthy state; that is, the Cisco IME service is active, and the Unified Communications Manager has successfully established a connection to its primary and backup servers for the Cisco IME client instance, if configured.
• 2—Indicates an unhealthy state; that is, the Cisco IME service is active, but the Unified Communications Manager has not successfully established a connection to its primary and backup servers for the Cisco IME client instance, if configured.

SoapCrossClusterRedirect

This counter represents the number of login requests received by the Cisco SOAP interface which were redirected to a node in a peer cluster.

SoapLoginFailures

This counter represents the number of failed login requests received by the Cisco SOAP interface.

SoapNodeRedirect

This counter represents the number of login requests received by the Cisco SOAP interface which were redirected to another node.

Subscribe

SubscribesReceived

This counter represents the number of SUBSCRIBE messages received by the Presence Engine, including initial subscribes, refreshes, fetches & unsubscribes.

SubscribesSent

This counter represents the total number of SUBSCRIBE messages sent from the Presence Engine.

SubscribesReceivedPresence

This counter represents the number of SUBSCRIBE messages received by the Presence Engine with an event type of presence.

SubscribesReceivedProfileConfig

This counter represents the number of SUBSCRIBE messages received by the Presence Engine with an event type of profileconfig.

SubscribesInitial

This counter represents the number of initial non-calendar SUBSCRIBE messages received.

SubscribesRefresh

This counter represents the number of non-calendar refresh SUBSCRIBE messages received.

SubscribesFetch

This counter represents the number of non-calendar fetch SUBSCRIBE messages received.

SubscribesRemove

This counter represents the number of non-calendar remove SUBSCRIBE messages received.

ActiveSubscriptions

This counter represents the number of non-calendar subscriptions that are currently active.

SubscribesRedirect3xx

This counter represents the number of SUBSCRIBE messages redirected with a 3xx response.

SubscribesRejected4xx

This counter represents the number of SUBSCRIBE messages rejected with a 4xx response.

SubscibesRejected5xx

This counter represents the number of SUBSCRIBE messages rejected with a 5xx response.

SubscibesRejected6xx

This counter represents the number of SUBSCRIBE messages rejected with a 6xx response.

SubcribesRejectedWith503

This counter represents the number of SUBSCRIBE messages rejected with a 503 responses.

SubscriptionActiveSentForeign

This counter represents the number of active subscriptions sent by the Presence Engine to a foreign domain.

SubscriptionActiveReceivedFrom Foreign

This counter represents the number of active subscriptions received by the Presence Engine from a foreign domain.

WatcherInfoPresenceSubscriptions

This counter represents the number of watcher-info presence subscriptions.

Calendar

ActiveCalendarSubscriptions

This counter represents the n.umber of calendar subscriptions that are currently active.

SubscribesSentCalendarInitial

This counter represents the number of initial SUBSCRIBE messages sent by the Presence Engine to the calendar server.

SubscribesSentCalendarRefresh

This counter represents the number of refresh SUBSCRIBE messages sent by the Presence Engine to the calendar server.

SubscribesSentCalendarRetry

This counter represents the number of retry SUBSCRIBE messages sent by the Presence Engine to the calendar server.

SubscribesReceivedCalendar

This counter represents the number of SUBSCRIBE messages received by the Presence Engine with an event type of calendar.

NotifiesReceivedCalendar

This counter represents the number of NOTIFY messages by the Presence Engine with an event type of calendar.

NotifiesSentCalendar

This counter represents the number of NOTIFY messages sent from the Presence Engine with an event type of calendar.

MeetingsStarted

This counter represents the number of meetings that were started through calendar integration.

MeetingsEnded

This counter represents the number of meetings that were ended through calendar integration.

Publish

PublicationsProcessed

This counter represents the number of successful publications processed by the Presence Engine.

PublishInitial

This counter represents the number of initial PUBLISH messages received.

PublishRefresh

This counter represents the number of refresh PUBLISH messages received.

PublishModify

This counter represents the number of modify PUBLISH messages received.

PublishRemove

This counter represents the number of remove PUBLISH messages received.

Notify

NotificationsInQueue

This counter represents the number of the existing number of outgoing NOTIFY messages queued by the Presence Engine.

NotifiesSent

This counter represents the number of successful NOTIFY messages sent out by the Presence Engine.

NotifiesReceived

This counter represents the number of NOTIFY messages received by the Presence Engine from backend subscriptions.

NotifiesSentPresence

This counter represents the number of NOTIFY messages sent from the Presence Engine with an event type of presence.

NotifiesSentProfileConfig

This counter represents the number of NOTIFY messages sent from the Presence Engine with an event type of profileconfig.

NotifiesRetried

This counter represents the number of NOTIFY messages sent that were retried.

NotifiesTimedouts

This counter represents the number of NOTIFY messages that timed out.

NotifiesRejected3xx

This counter represents the number of NOTIFY messages rejected with a 3xx response.

NotifiesRejected4xx

This counter represents the number of NOTIFY messages rejected with a 4xx response.

NotiffiesRejected5xx

This counter represents the number of NOTIFY messages rejected with a 5xx response.

NotifiesRejected503

This counter represents the number of NOTIFY messages rejected with a 503 response.

NotifiesRejected6xx

This counter represents the number of NOTIFY messages rejected with a 6xx response.

WatcherInfoPresenceNotifications

This counter represents the number of watcher-info presence notifications.

WatcherInfoPresenceSubscriptions

This counter represents the number of watcher-info presence subscriptions.

HighWaterMark

HighWaterMark

This counter represents the number of times the load high water mark has been reached.

Active Views

ActiveViews

This counter represents the number of Active Views in the Presence Engine.

Active Resources

ActiveResources

This counter represents the number of active resources in the Presence Engine.

JSM

ActiveJsmSessions

This counter represents the number of client emulation sessions between the Presence Engine and JSM.

XMPP

XMPPPresenceReceived

This counter represents the number of XMPP presence packets received.

XMPPPresenceFiltered

This counter represents the number of XMPP presence packets received that were filtered.

XMPPPresenceNotificationsSent

This counter represents the number of composed presence updates sent to JSM.

XMPPIMReceived

This counter represents the number of XMPP Instant Message packets received by the Presence Engine.

XMPPIMSent

This counter represents the number of XMPP Instant Message packets sent by the Presence Engine.

XMPPIMTcInviteErrors

This counter represents the number of XMPP TC Invites rejected by the Presence Engine.

XMPPIMResourceNotFoundErrors

This counter represents the number of XMPP Instant Message packets received for unregistered SIP resources.

XMPPIMIgnored

This counter represents the number of XMPP Instant Message packets dropped by the Presence Engine.

XMPPIMGoneGenerated

This counter represents the number of gone messages sent to the RFI on presence events.

RFIErrors

This counter represents the number of errors when sending XMPP messages to the RFI layer.

RFIMessageQueueSize

This counter represents the current number of XMPP Messages that are queued as the RFI is PAUSED.

SIP

SIPIMReceived

This counter represents the number of SIP Instant Message packets received by the Presence Engine.

SIPIMSent

This counter represents the number of SIP Instant Message packets sent by the Presence Engine.

SIPIMGoneGenerated

This counter represents the number of gone messages sent to the Proxy on presence events.

SIPIMRetry

This counter represents the number of SIP Instant Message resent to the Proxy.

SIPIMTimeout

This counter represents the number of SIP Instant Message packets that timed out when sending to the Proxy.

SIPIMReject3xx

This counter represents the number of 3xx errors when attempting to send SIP Instant Message packets to the Proxy.

SIPIMReject4xx

This counter represents the number of 4xx errors when attempting to send SIP Instant Message packets to the Proxy.

SIPIMReject5xx

This counter represents the number of 5xx errors when attempting to send SIP Instant Message packets to the Proxy.

SIPIMReject6xx

This counter represents the number of 6xx errors when attempting to send SIP Instant Message packets to the Proxy.

ActiveIMSessions

This counter represents the number of Active Instant Message sessions between SIP and XMPP.

Roster Sync

RosterSyncAddBuddySuccess

This counter represents the number of successful add buddy requests processed by the Roster Sync Agent.

RosterSyncAddBuddyFailure

This counter represents the number of failed add buddy requests processed by the Roster Sync Agent.

RosterSyncUpdateBuddySuccess

This counter represents the number of successful update buddy requests processed by the Roster Sync Agent.

RosterSyncUpdateBuddyFailure

This counter represents the number of failed update buddy requests processed by the Roster Sync Agent.

RosterSyncDeleteBuddySuccess

This counter represents the number of successful delete buddy requests processed by the Roster Sync Agent.

RosterSyncDeleteBuddyFailure

This counter represents the number of failed delete buddy requests processed by the Roster Sync Agent.

RosterSyncSubscribeSuccess

This counter represents the number of successful subscribe requests processed by the Roster Sync Agent.

RosterSyncSubscribeFailure

This counter represents the number of failed subscribe requests processed by the Roster Sync Agent.

RosterSyncUnSubscribeSuccess

This counter represents the number of successful unsubscribe requests processed by the Roster Sync Agent.

RosterSyncUnSubscribeFailure

This counter represents the number of failed unsubscribe requests processed by the Roster Sync Agent.

PolicyUpdateSent

This counter represents the number of privacy policy update sent to XCP.

PolicyUpdateReceived

This counter represents the number of privacy policy update received from XCP.

RosterSyncUnSubscribedSuccess

This counter represents the number of successful unsubscribed requests processed by the Roster Sync Agent.

RosterSyncUnSubscribedFailure

This counter represents the number of failed unsubscribed requests processed by the Roster Sync Agent.

SRMState

This counter represents the state of the SRM.

• 0 = Unknown

• 1 = Initializing

• 2 = Idle

• 3 = Active Normal

• 4 = Backup Activated

• 5 = Taking Over

• 6 = Taking Back

• 7 = Failing Over

• 8 = Failed Over

• 9 = Failed Over Affected Service

• 10 = Falling Back

• 11 = Failed

• 12 = Down State

CTIGWConferenceReq

This counter represents the number of conference call requests received by CTIGW.

CTIGWInboundCalls

This counter represents the number of inbound calls received by CTIGW.

CTIGWLineOpenRequest

This counter represents the number of LineOpen requests received by CTIGW.

CTIGWMakeCallRequest

This counter represents the number of MakeCall requests received by CTIGW.

CTIGWRefreshCount

This counter represents the number of INVITE Refreshes received by the IM and Presence server that are sent from the MOC client.

CTIGWRetrieveReq

This counter represents the number of retrieve call requests received by CTIGW.

CTIGWSip4XXRes

This counter represents the number of SIP 4XX response sent by CTIGW.

CTIGWSip5XXRes

This counter represents the number of SIP 5XX response sent by CTIGW.

CTIGWSSXrefReq

This counter represents the number of single step transfer call requests received by CTIGW.

CTIGWUsersAuthorized

This counter represents the number of users authorized by CTIGW.

CTIGWUsersCurrentlyAuthorized

This counter represents the number of users currently logged into MOC client for Remote Call Control.

CTIGWXrefReq

This counter represents the number of transfer call requests received by CTIGW.

HttpRequests

This counter represents the number of HTTP requests processed.

IMCTRLActiveSessions

This counter represents the current number of active federated IM sessions.

IMGWActiveSessions

This counter represents the current number of active SIP XMPP IM gateway sessions being maintained by the proxy.

IMGWClientMessageSent

This counter represents the current number of SIP Messages sent to SIP client from the XMPP IM gateway.

IMGWPeMessageReceived

This counter represents the current number of SIP Messages received from the local PE by the XMPP IM gateway.

IMGWPeMessageSent

This counter represents the current number of SIP Messages sent to the local PE for the XMPP IM gateway.

Ipc_Requests

This counter represents the number of IPC requests from the TCP process.

NumIdleSipdWorkers

This counter represents the number of idle sipd worker processes at a current instance.

NumSipdWorker

This counter represents the number of sipd worker processes at a current instance.

Proxy_Due_Timer_Events

This counter represents the number of past-due timer events that were queued.

Proxy_Timer_Events

This counter represents the number of expired timer events.

PWSAppUserLoginRequest

This counter represents the number of Application User login requests received by the Presence Web Service Module.

PWSAppUserLogoutRequest

This counter represents the number of Application User logout requests received by the Presence Web Service Module.

PWSEndpointExpired

This counter represents the number of subscriptions that expire before been refreshed.

PWSEndpointRefreshRequest

This counter represents the number of Endpoint refresh requests received by the Presence Web Service Module.

PWSEndUserLoginRequest

This counter represents the number of End User login requests received by the Presence Web Service Module.

PWSEndUserLogoutRequest

This counter represents the number of End User logout requests received by the Presence Web Service Module.

PWSGetPolledPresenceRequest

This counter represents the number of GetPolledPresence requests received by the Presence Web Service Module.

PWSGetSubscribedPresenceRequest

This counter represents the number of GetSubscribedPresence requests received by the Presence Web Service Module.

PWSPresenceNotifies

This counter represents the number of Presence Notifications sent by the Presence Web Service Module.

PWSRegisterEndpointRequest

This counter represents the number of Register Endpoint requests received by the Presence Web Service Module.

PWSSetPresenceRequest

This counter represents the number of SetPresence requests received by the Presence Web Service Module.

PWSSipNotifies

This counter represents the number of SIP Notifies received by the Presence Web Service Module.

PWSSipPublishRequests

This counter represents the number of SIP Publish requests sent by the Presence Web Service Module.

PWSSipSubscribeRequests

This counter represents the number of SIP Subscribe requests sent by the Presence Web Service Module.

PWSSipUnpublishRequests

This counter represents the number of SIP Unpublish requests sent by the Presence Web Service Module.

PWSSipUnsubscribeRequests

This counter represents the number of SIP Unsubscribe requests sent by the Presence Web Service Module.

PWSSubscribeExpired

This counter represents the number of endpoint registrations that expire before been refreshed.

PWSSubscribeRefreshRequest

This counter represents the number of Subscribe refresh requests received by the Presence Web Service Module.

PWSSubscribeRequest

This counter represents the number of Subscribe requests received by the Presence Web Service Module.

PWSUnregisterEndpointRequest

This counter represents the number of Unregister Endpoint requests received by the Presence Web Service Module.

PWSUnsubscribeRequest

This counter represents the number of Unsubscribe requests received by the Presence Web Service Module.

ServerLoadStatus

This counter represents the Server load status on scale of 0 (idle) to 3 (swamped).

SIPClientImMessage

This counter represents the number of SIP Client Instant Messages received by the proxy.

SIPClientRegistered

This counter represents the number of SIP Client REGISTER requests received by the proxy.

SIPClientRegisterFailed

This counter represents the number of failed SIP Client REGISTER requests received by the proxy.

Sip_Tcp_Requests

This counter represents the number of sip requests received over tcp transport.

Sip_Udp_Requests

This counter represents the number of sip requests received over udp transport.

SIPInviteRequestIn

This counter represents the number of INVITE requests received by the proxy.

SIPInviteRequestInForeign

This counter represents the current number of INVITE requests received by the proxy across the enterprise boundary.

SIPInviteRequestOut

This counter represents the number of INVITE requests sent by the proxy.

SIPInviteRequestOutForeign

This counter represents the current number of INVITE requests sent by the proxy across the enterprise boundary.

SIPMessageRequestIn

This counter represents the number of MESSAGE requests received by proxy.

SIPMessageRequestInForeign

This counter represents the current number of MESSAGE requests received by the proxy across the enterprise boundary.

SIPMessageRequestOutForeign

This counter represents the current number of MESSAGE requests sent by the proxy across the enterprise boundary.

SIPNotifyRequestIn

This counter represents the number of NOTIFY requests received by the proxy.

SIPNotifyRequestInForeign

This counter represents the current number of NOTIFY requests received by the proxy across the enterprise boundary.

SIPNotifyRequestOutForeign

This counter represents the current number of NOTIFY requests sent by the proxy across the enterprise boundary.

SIPRegisterRequestIn

This counter represents the number of REGISTER requests received by the proxy.

SIPRequestInForeign

This counter represents the current number of requests received directly by the proxy across the enterprise boundary.

SIPRequestOutForeign

This counter represents the current number of requests sent directly by proxy across the enterprise boundary.

SIPRetransmits

This counter represents the number of retransmits executed by the proxy.

SIPSubscribeRequestIn

This counter represents the number of SUBSCRIBE requests received by the proxy.

SIPSubscribeRequestInForeign

This counter represents the current number of SUBSCRIBE requests received by the proxy across the enterprise boundary.

SIPSubscribeRequestOutForeign

This counter represents the current number of SUBSCRIBE requests sent by the proxy across the enterprise boundary.

CmConnectedSockets

This counter represents the number of connected sockets in the Web Connection Manager component.

CmFailedRequests

This counter represents the total number of failed connection requests.

JdsLDAPSuccess

This counter represents the total successful LDAP searches within the JDS component.

JdsLDAPFailed

This counter represents the total failed LDAP searches within the JDS component.

JdsInvalidRequests

This counter represents the number of requests rejected by JDS component.

JSM IQ Namespace

This counter represents the number of IQ stanzas by type handled by the JSM.

JsmSessionIQIn

This counter represents IQ packets received by JSM on a session.

JsmSessionIQOut

This counter represents IQ packets sent by JSM on a session.

JsmSessionMessagesIn

This counter represents message packets received by JSM on a session.

JsmSessionMessagesOut

This counter represents message packets sent by JSM on a session.

JsmSessionPresenceIn

This counter represents presence packets received by JSM on a session.

JsmSessionPresenceOut

This counter represents presence packets sent by JSM on a session.

JsmSessionRosterSize

This counter represents snapshot size of roster for a user.

MaReceivedPackets

This counter represents the number of incoming messages archived by the message archiver component.

MaSentPackets

This counter represents the number of outgoing messages archived by the message archiver component.

MaSuccessDBWrites

This counter represents the number of successful database writes to the message archiver component.

MaFailedDBWrites

This counter represents the number of failed database writes to the message archiver component.

MaPacketsDropped

This counter represents the number of dropped packets by the message archiver component.

MaDBQueueSize

This counter represents the number of packets the message archiver has pending to write to its database.

RouterNormalPackets

This counter represents the total number of normal packets handled by the Cisco XCP router.

RouterXdbPackets

This counter represents the total number of xdb packets handled by the Cisco XCP router.

RouterRoutePackets

This counter represents the total number of route packets handled by the Cisco XCP router.

RouterLogPackets

This counter represents the total number of log packets handled by the Cisco XCP router.

SIPS2SIncomingDomains

This counter represents the total foreign domains with incoming subscriptions.

SIPS2SOutgoingDomains

This counter represents the total foreign domains with outgoing subscriptions.

SIPS2SSubscriptionsOut

This counter represents the number of active outgoing subscriptions.

SIPS2SSubscriptionsIn

This counter represents the number of active incoming subscriptions.

SIPS2SSubscriptionsPending

This counter represents the total pending SIP outgoing subscriptions.

SIPS2SNotifyIn

This counter represents the total number of SIP NOTIFY messages received.

SIPS2SNotifyOut

This counter represents the total number of SIP NOTIFY messages sent.

SIPS2SMessagesIn

This counter represents the total number of SIP MESSAGE messages received.

SIPS2SMessagesOut

This counter represents the total number of SIP MESSAGE messages sent.

SIPS2SByeIn

This counter represents the total number of SIP BYE messages received.

SIPS2SInviteIn

This counter represents the total number of SIP INVITE messages received.

SIPS2SInviteOut

This counter represents the total number of SIP INVITE messages sent.

S2SIncomingDomains

This counter represents the total foreign domains with incoming subscriptions.

S2SOutgoingDomains

This counter represents the total foreign domains with outgoing subscriptions.

S2SFailedDialbackIn

This counter represents the total number of failed incoming dialback attempts.

S2SFailedDialbackOut

This counter represents the total failed number of outgoing dialback attempts.

TCRoomNumOccupants

This counter represents number of occupants in MUC room.

TCRoomBytesSent

This counter represents number of bytes sent within MUC room.

TCRoomBytesRecv

This counter represents number of bytes received within MUC room.

TCRoomStanzasSent

This counter represents number of stanzas sent in MUC room.

TCRoomMsgPacketSent

This counter represents number of message packets sent within MUC room.

TCRoomMsgPacketsRecv

This counter represents number of message packets received within MUC room.

TCRoomPresencePacketsSent

This counter represents number of presence packets sent within MUC room.

TCRoomPresencePacketsRecv

This counter represents number of presence packets received within MUC room.

TCRoomIQPacketsSent

This counter represents number of IQ packets sent within MUC room.

TCRoomIQPacketsRecv

This counter represents number of IQ packets received within MUC room.

WebCMConnectedSockets

This counter represents the number of connected sockets in the Web Connection Manager component.

WebCMFailedRequests

This counter represents the number of failed requests in the Web Connection Manager component.

SMS Notifications Failed

The total number of SMS notifications failing to connect.

SMS Notifications Total

The total number of SMS notifications sent to subscribers by Cisco Unity Connection.

SMTP Notifications Total

The total number of SMTP notifications that Cisco Unity Connection sent to subscribers.

HTML Notifications with Summary of voice messages

The counter to maintain count of summary notifications.

HTML Notifications with Summary of voice messages in Last One Minute

The counter to maintain count of summary notifications sent in last one minute.

Scheduled Notifications Total

The counter to maintain count of scheduled summary notifications sent.

Scheduled Notifications in Last One Minute

The counter to maintain count of scheduled summary notifications sent in last minute.

Scheduled Notifications dropped due to Parent Schedule off

The counter to maintain count of scheduled summary notifications dropped (not sent) because the parent schedule was turned off.

Scheduled Notifications dropped due to Parent Schedule off in Last One Minute

The counter to maintain count of scheduled summary notifications dropped (not sent) in last one minute because the parent schedule was turned off.

Missed Call Notifications Total

The total number of missed call notifications sent fromCisco Unity Connection.

Bad Mail Total

Total number of messages sent to the Bad Mail folder since the last restart of the MTA server.

Delivery Receipts Total

Total number of delivery receipts since the last restart of the MTA server.

Incoming Recalls

Number of incoming requests to recall local copies of messages initiated by remote senders on other network locations.

Intersite Messages Delivered Per Minute

Number of intersite messages delivered in the last minute.

Intersite Messages Delivered Total

Total number of intersite messages delivered since the last restart of the MTA server.

Intersite Messages Received Per Minute

Number of intersite messages received in the last minute.

Intersite Messages Received Total

Total number of intersite messages received since the last restart of the MTA server.

Intersite Messages Total

Total number of intersite messages that have been delivered and received since the last restart of the MTA server.

Local Recalls

Number of message recalls initiated by local senders on this server.

Message Size Average [kb]

The average size of the MTA at each sample in kilobytes.

Messages Delivered Total

Total number of messages delivered since the last restart of the MTA server.

Messages Received Total

Total number of messages received since the last restart of the MTA server.

Non-delivery Receipts Total

Total number of non-delivery receipts since the last restart of the MTA server.

Number of Items Recalled

Total number of message recalls. This number includes each individual copy of a message that was sent to multiple recipients, so this number could be much larger than the Total Recalls, Local and Remote performance counter.

Queued Messages Current

The number of messages currently queued in the MTA.

Read Receipts Total

Total number of read receipts since the last restart of the MTA server.

Retries Total

Total number of retries since the last restart of the MTA server.

Total dispatch message folder items delivered

Total number of dispatch messages that have been delivered to individual user mailboxes since the MTA started. This number includes a count of each individual copy of a message sent to multiple recipients.

Total dispatch messages accepted

Total number of dispatch messages that have been accepted since the last restart of the MTA server

Total dispatch messages delivered

Total number of dispatch messages that have been delivered since the MTA started. This number includes each message just once, regardless of the number of recipients.

Total dispatch message items rejected

Total number of individual copies of dispatch messages that have been declined since the last restart of the MTA server.

Total dispatch messages removed due to acceptance

Total number of dispatch messages that have been removed from user mailboxes due to the message being accepted by another user since the last restart of the MTA server

Total recalls, local and remote

Total number of message recalls initiated by local and remote senders. This number should be equal to the total of Incoming Recalls and Local Recalls performance counters.

VPIM Message Decode Duration Average [s]

The average time [in seconds] to decode voice messages in MIME format to the original format.

VPIM Message Encode Duration Average [s]

The average time [in seconds] to encode voice messages to MIME format.

VPIM Messages Delivered Per Minute

The number of VPIM messages that the Cisco Unity Connection Messages Store delivered within a minute.

VPIM Messages Delivered Total

The total number of VPIM messages that the Cisco Unity Connection Messages Store delivered.

VPIM Messages Received Per Minute

The number of VPIM messages that the Cisco Unity Connection Messages Store received per minute.

VPIM Messages Received Total

The total number of VPIM messages that the Cisco Unity Connection Messages Store received.

VPIM Messages Total

The total number of VPIM messages that the Cisco Unity Connection Message Store processed.

Messages Undelivered Mailbox Quota Full Notification Total

The total number of missed call notification sent when mailbox quota is full.

Video Messages Delivered Total

The total number of video messages delivered since the last restart of the MTA server.

Video Messages Delivered Per Minute

The total number of video messages delivered per minute since the last restart of the MTA server.

Video Messages Processed by MTA Total

The total number of video messages processed (both successful and unsuccessful) by the MTA server since the last restart of the server.

Video Messages Processed by MTA Per Minute

The total number of video messages processed (both successful and unsuccessful) by the MTA server per minute since the last restart of the server.

Applicable Rule Found

Personal call transfer rule (PCTR) call resulted in rule processing, and an applicable transfer rule is found.

Destinations Tried

Number of destinations tried while transfer rules were applied.

PCTR Calls

Calls that are subject to personal call transfer rule (PCTR) processing: user assigned COS is enabled for PCTR, user is a Unified Communications Manager user, user has not disabled PCTR.

Rules Evaluated

Number of rules that are evaluated during rule processing in a personal call transfer rule (PCTR) call.

Subscriber Reached

Number of times that a subscriber was reached while transfer rules were applied.

Transfer Failed

Number of times that Cisco Unity Connection fails to transfer a call to a destination while personal call transfer rules were applied. Transfer failures include all conditions except when the called destination is connected, busy, or RNA or times out. A caller hanging up during a transfer gets considered a transfer failure.