Cisco Prime License Manager CLI Commands
Introduction
The commands in this section are specific to Cisco Prime License Manager. For platform-specific commands, see Command Line Interface Guide for Cisco Unified Communications Solutions.
license file
This command asks to select a license file from a list.
license file { diagnose | get }
Syntax Description
| Parameters | Description |
|---|---|
| diagnose |
Prints diagnostic information of the selected file. |
| get |
Creates a TAR file of the license file(s) on the system and transfers the TAR file to a remote area. |
Command Modes
Administrator (admin:)
Requirements
Command privilege level: 1
Allowed during upgrade: Yes
Applies to: Enterprise License Manager, Cisco Prime License Manager
license management change user
This command takes parameters interactively and changes the username or password of the administrator.
license management change user { name | password }
Syntax Description
| Parameters | Description | ||
|---|---|---|---|
| name |
Specifies the administrator username. |
||
| password |
Specifies the administrator password.
|
Command Modes
Administrator (admin:)
Requirements
Command privilege level: 1
Allowed during upgrade: Yes
Applies to: Enterprise License Manager, Cisco Prime License Manager
license management list users
This command lists the administrative users.
license management list users
Command Modes
Administrator (admin:)
Requirements
Command privilege level: 1
Allowed during upgrade: Yes
Applies to: Enterprise License Manager, Cisco Prime License Manager
license management product re-register all
This command forces re-registration of all product instances associated with this Enterprise License Manager/Cisco Prime License Manager server. This command may take some time for re-registration and synchronization with all product instances to complete.
license management product re-register all
Command Modes
Administrator (admin:)
Requirements
Command privilege level: 1
Allowed during upgrade: Yes
Applies to: Enterprise License Manager, Cisco Prime License Manager
license management reset
This command resets the identity, store data, and essentially removes all the installed licenses. It also restarts the Cisco Prime License Manager server process to make the changes effective.
license management reset { identity | registration }
Syntax Description
| Parameters | Description |
|---|---|
| identity |
Resets the identity |
| registration |
Resets the registration |
Command Modes
Administrator (admin:)
Requirements
Command privilege level: 1
Allowed during upgrade: Yes
Applies to: Enterprise License Manager, Cisco Prime License Manager
license management security update
This command downloads Cisco Prime License Manager security update from the specified remote server location and installs the contents of the specified security update file.
license management security update
Requirements
Command privilege level: 1
Allowed during upgrade: Yes
Applies to: Enterprise License Manager, Cisco Prime License Manager
license management service
This command activates or deactivates a given service on the Cisco Prime License Manager server.
license management service { activate | deactivate }
Syntax Description
| Parameters | Description |
|---|---|
| activate |
Activates a given service on the Cisco Prime License Manager server. |
| deactivate |
Deactivates a given service on the Cisco Prime License Manager server. |
Command Modes
Administrator (admin:)
Requirements
Command privilege level: 1
Allowed during upgrade: Yes
Applies to: Enterprise License Manager, Cisco Prime License Manager
license management show system
This command lists the administrative users.
license management show system
Command Modes
Administrator (admin:)
Requirements
Command privilege level: 1
Allowed during upgrade: Yes
Applies to: Enterprise License Manager, Cisco Prime License Manager
Feedback